The NI 9144 engine analysis

Hi all

I would like to know if it is possible to not have logic for the scan engine in the FPGA NI9144 when you use the 3rd party module that can't stand, to save space?

Is it possible to get rid of it, in this case?

Thanks for the replies

Duri

Hello Duri,

Unfortunately, this will not be possible. The logic of the analytical engine and some other components are needed for the 9144 work properly. We are the variables defined by the user I/O (UDVs) of the scan engine to synchronize the data of the FPGA slave with real-time control processing and transfer data between the FPGA expansion chassis and program in real time of the controller.

If you run lack of space on the FPGA, then we can consider in some other resources saving, optimizations.

I also wanted to let you know that we have a forum dedicated to the industrial Communications. Our EtherCAT experts monitor this forum, and there a little less crowded so your message is unlikely to be overlooked. Please see the link below if you have any other questions of EtherCAT.

http://forums.NI.com/T5/industrial-communications/BD-p/260

Thank you for your question and have a beautiful day!

Tags: NI Hardware

Similar Questions

  • How can I select 'search yandex' as a default search in the night Navigator engine 44.0a1 x 64

    How can I select 'search yandex' as a default search in the night Navigator engine 44.0a1 x 64?

    Now, I see a lot of search engines but did not have "yandex".

    And how do I install elements of Yandex, when this may be available?

    If you are not able to install a search plugin for Yandex from the modules or Mycroft site, you can try to install one on the site (this works in Firefox 41, I have not tested in every night):

    Visit https://www.yandex.ru/ and notice that there is a green circle with a + on it on the search bar of Firefox. Click on that and then find the line on the menu drop down to add the site as a search engine.

    I have attached a screenshot, but since I can't actually read the language, I apologize if it's totally another thing.

    To make Yandex your default, you can use the link at the bottom of the Panel to the Options page search section.

    Success?

    Regarding Yandex elements, is the problem that Yandex has not presented the extension to be signed by the team of Add-ons? It's something that you might feel free to encourage them to do.

  • A search engine click always uses the default search engine

    In the search bar, I type the word London and press enter and get the results of a search Google (default search engine).
    I click on the magnifying glass to open the search drop-down list and click the icon for Wikipedia (to perform a search on Wikipedia for the word London). However, the results are not Wikipedia but are the same as my previous research on Google. The only way I can get the research to be done on Wikipedia is to change Wikipedia to my default search engine.
    Am I misunderstand how the search with a single click is supposed to work, or you can tell me what I need to change to make it work?
    Thank you

    Using the arrow keys or tab to the search engine icon had the same result by clicking on the icon to directly search engine, any search engine was selected the search is always performed by the default search engine.
    Running in Mode safe solves the problem
    Classic deactivation restaurateur theme does not solve the problem, but disabling 'Tab control 0.5.5' solve the problem . In the reviews of this add-on a few users have mentioned this as a problem. I've removed "Tab control" as an add-on (even though I liked some of its features) because it is no longer maintained.
    Thanks for your replies.

  • How to add the custom search engine?

    Hello
    Firefox is a great browser especially for those who care about freedom and privacy. I would like to know why it is not possible to specify the custom search engine that you were able to do in the latest version of Firefox. I want to use the search engine google with https://search.disconnect.me/ which offers the possibility of anonymous research. I know that there is a plugin https://disconnect.me/search, but is not very comfortable with respect to the standard search bar. Thank you

    I read the solution proposed here https://support.mozilla.org/en-US/kb/use-search-bar-firefox-and-manage-search-engines#w_add-a-search-engine but in 36 of Firefox does not work

    TypeError message probably explains why you could not add the page of Mycroft search engine initially.

    When I search this exact error in Google, only that rolled up from July 2013:

    As long as the 'Integration of office of Unity 2.4.6' plugin is enabled I couldn't add to Firefox search engines.
    https://bugs.Launchpad.NET/Ubuntu/+source/unity-Firefox-extension/+bug/1202383

    Note: this option is not a Plugin, this is an Extension and available on the page Add-ons with other extensions.

  • How can I change the default search engine in Firefox 31.0

    The icon to the left of the search box seems to have disappeared. What now?

    You can check if you have the XML files including Google's default search engine in the browser\searchplugins file in the Firefox program folder.

    If this isn't the case, then you need to reinstall Firefox.

    Try to delete the file search.json and possible search - metadata.json and search.sqlite files in the profile folder of Firefox to reset the default search engines.

    Firefox will rebuild the file search.json from the default search engines in the folder "browser\searchplugins" in the Firefox program folder and the searchplugins folder in the Firefox profile folder.

    You can use this button to go to the Firefox profile folder currently in use:

    • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • An add-on to force firefox switch to the default search engine in the search bar

    Hello

    I have a few search engines in the search bar of firefox. I find it extremely annoying that whenever I have change the search engine, that it stays like this, even after restarting firefox. Is there an add-on that would go to the one who is at the top of the list (which is my default for search engine being both navigation bar) whenever I restart the browser?

    Let me give you an example: I use duckduckgo as a search engine by default in the search bar and navigation bar. Let's say I need to find a definition for which I use the wikipedia search engine. Then I go to wikipedia one. I disable the browser the next time I start firefox search engine that appears in the search bar is wikipedia and I would have preferred it to be duckduckgo.

    I hope that's not waves.

    see you soon,
    Omen

    Easier is to put the default engine for search engine preferred via the user.js file in the Firefox profile folder by copying the line user_pref() related to this file.

    The user.js file is read whenever Firefox is started and initializes the preferences to the specified value in this file, so the preferences set via user.js can be changed temporarily for the current session.

    You can search the topic: config page for browser.search. to locate the pref (s) you need.

    • user_pref ("browser.search.defaultenginename", 'Google');

    You can use this button to go to the Firefox profile folder currently in use:

    • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
    • Create the folder chrome (lowercase) in the .default < xxxxxxxx > profile folder if the folder does not exist
    • Use a text editor such as Notepad to create a file user.js (new) in this folder (the names are case-sensitive)
    • Make sure that you select "All files" and not "text files" when you save the file via "save file as" in the text editor as user.js
      Otherwise, Windows can add a hidden .txt file extension and you end up with one does not not user.js.txt file
  • How can I stop Firefox to redirect me to the Yahoo search engine

    When I try to go to the official site for ATF Cleaner, Firefox redirects me to the Yahoo search engine.
    I have removed all references to Yahoo in my registry and searched all the user for any reference to Yahoo profiles. I am running Firefox version 29.0.1 on Windows XP.

    It is also possible that this problem is due to an add-on, maybe one who snuck on your system as part of a bundle.

    In the case where one of your extensions is concerned, could test the page Firefox Safe Mode? It is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.

    You can restart Firefox in Mode safe mode using either:

    • button "3-bar" menu > "?" button > restart with disabled modules
    • Help menu > restart with disabled modules

    Not all add-ons are disabled: Flash and other plugins still works

    After stops in Firefox, a small dialog box should appear. Click on 'Start mode safe' (not reset).

    Any difference?

  • How to set the location bar search regardless of the selected search engine bar?

    The search in the address bar searches with the currently selected in the search bar engine with 23 FF. I find the annoying behavior, because sometimes I select different engines in the search bar, if necessary, but most often I just need to research that I make from the location bar wihout need to change the quick google search engine.

    Is it possible to customize the behavior, so that the search in the address bar still points on a single engine, regardless of the engine that is selected in the search bar?

    Hello tadolo, you can use an addon like https://addons.mozilla.org/firefox/addon/keyword-search/ to get the old behavior.

  • How can Hi I change the default search engine in firefox android? Largely, I would prefer to use something other than google. The previous method does not work

    greetings...

    How can I change the default search engine in Firefox android at https://duckduckgo.com? The previous instructions to change the default search no longer work. the key word in string. URL no longer exists and after add and enter a value of https://duckduckgo.com/?q= he always default to a Google search. Go figure when the only room I can get Firefox for Android it the Google game store.

    Hello eyeb1, please visit www.ghacks.net/2013/08/07/firefox-23-for-android-launches-with-custom-search-engine-support-and-rss-feed-support/

  • My search for the addr.bar engine is google and in the search bar - wiki en. But now, the search bar engine overrides the addr.bar one. I want to change this

    About: config keyword.url is set to http://www.google.ru/search?hl=ru & q =
    In the my search engine search bar is en wiki.
    At the moment the engine chosen in the search bar, substitute one chosen for the address bar. But I would like to use both.
    I guess this problem may be caused by the new update, but maybe something can be done about it?

    Hello, Yes, consolidating the search options in the search bar, address bar and the default homepage was a change deliberated by the developers. You can use the keyword search by mike kaply extension work around this if...

  • Search engine box change also affects the default search engine in the URL bar

    I've just updated to 23.0, and for some reason, change the search engine in the search box also changes the default search engine in the URL bar as well. I don't know if it's intended functionality (I hope that's not), but it is a bit irritating. I didn't know if it was related to an add-on that I installed it at the same time, so I tried to turn that off, but the problem was still there. so I tentatively guess it has to do with 23.0.

    Hello, yes it is (unfortunately) the new behavior in firefox 23 and upward and was introduced to solve the problem that several tools/adware toolbars are crush keyword.url unbeknownst to users preference...

    See also bug #738818 (please do not post in the bug reports).

    Additional comment, the add-on restartless Keyword Searchcan solve the problem, please see my post /questions/963439? page = 2 #answer-463664 ~ J99

  • How can I change the default search engine in the search bar?

    Everytime I open firefox default search in the search bar engine little is still Yahoo, and nothing I do changes it again to google permanently. Even when I type something in the address bar it uses yahoo. Ive tried everything, including going in to about: config and change a bunch of stuff like put in the string of google, but nothing works...

    Hello jonhon8, this looks like a problem that can be caused by adware on your pc. Please go to firefox > addons > extensions & remove any suspect entries (toolbars, the things that you do not have intentionally, etc.). also, go to the windows control panel / programs and remove all toolbars or potentially unwanted software from here and do a full scan of your system with the security software you have in place or another tool like the free version of malwarebytes.

    Remove a toolbar that has supported your Firefox or the homepage search

    then install the reset search addon - he will return the most common customizations of these default firefox adware programs: https://addons.mozilla.org/firefox/addon/searchreset/

  • How can I change the default search engine in firefox 14?

    I tried to change my default search engine, does not. A read a lot of the help file, but it seems that none of the recommendations had jobs. The problem is in the search box in the upper right where the default from now (the search engine when I open firefox for the first time) is Yahoo. I had tried to change it to goggle by clicking on the drop down arrow and select a new search engine, but does not take effect. Yahoo is still in effect so that the search engine despite this change. I also followed the advice of some to change the default engine by typing "subject: config" in the address bar and some values but still after the opening and closing firefox again, Yahoo is still the default search and could be that the change by selecting from the drop-down search menu.

    Thank you for your answer but I managed to fix the problem already. What I did is to select from the dropdown to Ask.com (it seems that it is the only option that work) a window appeared asking me what a search engine change was made, and if I would use Ask.com to be the search engine or to maintain using Yahoo.com. I chose to use Ask.com and disable the protection on the search engine. Toke effect change and after that I could change from the drop down list a search engine like Google. I put a note above in parenthesis closed, that it seems Ask.com works as I tried before to change the search engine Google, but no window came to ask me if I want to change the default search engine.

    Once again thanks a lot to you two, for the reply and for your precious time to try to solve this problem.

  • How can I change the default search engine in the navigation bar?

    I tried the subject: solution of config and it did not work. My search engine used to be Google, but it has changed to a random search engine that doesn't even have an official name. Is there no option in the menu dropdown. And there is no option in the FireFox Options. I wonder why it is so difficult to change something like that. There should be a button for those of us who are not computer savvy. Am getting irritated that I can't just look for something more.

    Hello please install the addon search reset to restore the default search engine:
    https://addons.Mozilla.org/firefox/addon/SearchReset/

    Also make sure that you do not have the toolbars or programs installed part 3 that can replace search behavior in firefox

    Remove a toolbar that has supported your Firefox or the homepage search

  • Why the firefox rendering engine go berzerk and display garbage?

    As I scroll or I go to a new page, more at any time, the display in the window of Firefox becomes badly displayed. It is pehaps diagonally across the window or perhaps a sub display field appears distorted diagonally. I could send a screenshot. It happened a bit when you use Thunderbird, which I understand has the same rendering engine but not lately. If I close Firefox and start it again, it might behave for a while. He quickly began having problems again. Right now, as I type this, this pane for entering text flashes on and outside, and it has now begun to go diagonal to its display. At the same time, I continue to type text. Is it possible to send some screenshots? As I type this and then to the bottom of the page, try to copy and past the information requested below in case of problem, I had a lot of trouble with the screen turning autour. Finally, I noticed the link to copy all to the Clipboard to paste below. I can't tell you if he did because I can't get the window below to display correctly.

    Instead of boot mode safe, you can try to turn off the use hardware acceleration where possible of Tools (Alt + T) > Options > Advanced > general and restart Firefox normally.

    You can also take a screenshot using the PrtSc / SysRq key on the keyboard. This takes a picture of the whole desktop, copy the memory/Clipboard and you can paste it in any graphics program, save it and download it. To take a just active window press Alt and the key above together.

Maybe you are looking for

  • BER in the power spectrum

    Hello I have a question about BER and SNR and I would appreciate your help. I have a power Spectrum (live with the presence of interference) and I would like to know in what parts of the spectrum, I can achieve a target BER (lets say 10th-3) My sugge

  • having a problem windows 8.1 drivers vpcf22bfx

    having a problem on windows 8.1 Preview drivers

  • Cannot create the remote desktop connection in two different networks.

    Original title: Windows 7 PRO through internet Remote Desktop connection. Two windows 7 Machines Pro. They want to be able to connect to the main computer (Internet router) when they are away at their House on the other. It connects via DSL behind a

  • How to report on Oracle 11 g XE UTL_FILE.

    Hi, I have installed Oracle 11 g XE and the need to declare UTL_FILE.When you run a package you get the error: PLS-00201: identifier 'UTL_FILE' must be declared.In different forums to refer both to create a SYS user and I use the command:Grant execut

  • Calculate the number of nodes in a version

    Hi gurus,Need a little help. Is it possible to discover a total number of nodes (all hierarchies combined) in a version?Kind regardsOlivier M.