The numbers E.164 + and IOS voice translation rules

Hello

I have a cluster to CUCM 9.x with a plan of + E.164 numbering for the receivers, route patterns etc.

I have a gateway ISDN (2911 SRI with IOS 15.3 (3) M1) which connects to the PSTN.

The ISDN provider cannot accept the destination for the format + E.164 numbers so I need to manipulate the figures called before sending them to the PSTN switch.

I can of course do this with CUCM party called models of translation, but I wonder if it is possible to do the translation on the bridge instead?

The rule I tried to use below (Country Code of the United Kingdom).

rule 1 / ^ + 44\(.*\) / / 0\1 /.

I want it to do is + 44 at the beginning of the number of bands and replace it with 0

for example + 441234444666 becomes 01234444666

The rule I've tried fails because the + symbol is identified as a wildcard rather than in the number string I want to match.

Is there a way to get around this?

Thank you

Hello James

This is a regular expression, have you tried setting point (.) first then + followed by your number

I'll try in the laboratory

BR,
Nadeem

Please note all the useful post.

Tags: Cisco Support

Similar Questions

  • I can't open pictures sent in an e-mail message, the item opens in the word pad and only displays the numbers of letters and symbols. What should I do so that he can open it with a picyure?

    How can I get the images to open when I click on the jpeg symbol? It opens in Word pad and only displays the numbers of letters and symbols.

    Save the attachment to your HARD drive. Right-click on it and open with | Choose the program. Find and choose a program that works, and then check the box: always use this program to open this type of file. This should allow you to open these attachments in the future.   Bruce Hagen MS - MVP [Mail]

  • Block a call with voice translation-rule

    I have the voice gateway Cisco connected to the PBX through E1 PRI. I want to disable all PBX users make direct calls to _some_ IP phones. I tried to do it with the voice translation rule. Part of my config is shown below. But this configuration does not work. Where a mistake?

    voice translation-rule 2

    rule 1 rejection / ^ 57 [12456789] [1345678].

    rule 2 rejection /^57[12456789]./

    rejection of rule 3 / ^ 57. [123456789].

    voice translation-profile NoDirect

    translate called 2

    Dial-peer voice voip 200

    call block-translation-profile entering NoDirect

    disconnect-cause invalid number incoming call block

    destination-model 5 [78]... T

    Setup progress_ind allow 3

    session target ipv4:10.1.2.246

    DTMF-relay h245 alphanumeric

    codec g711ulaw 80 bytes

    No vad

    Good to hear that it has been solved.

    Thank you

    Radhika.

  • Can I reinstall Windows XP and Office 2007 with just the numbers, product keys, and no disc.

    I have three old computers in my house.  All three begin to show serious signs of just getting old.  I was recommended to clean my computers.  I would like to reinstall my Windows OS and reinstall the software of my office.  I've lost my records over the years and moving, but still have my product key numbers that I kept in my office files.  Is it possible to reinstall it without a disk?

    BCorb,

    I suggest you call the computer manufacturer and request for an XP CD will be sent to you. It should be for only a few dollars, like $10 or more because it is an OEM copy.

    For the Office CD, if it came with the computer you could probably try to ask them to send a copy as well, although I do not know if your computer manufacturer did.

    See you soon ~!

  • The 1310 AP configuration and IOS

    I have two 1310's

    the info for A is:

    Product/model number: AIR-BR1310G-A-K9-r
    Software system Filename: C1310-k9w7 - tar.124 - 3 g .JA1
    System software version: 12.4(3G) JA1
    The boot loader version: JA4 12.3 (2)

    the infor for B is:

    Product/model number: AIR-BR1310G-A-K9
    Software system Filename: C1310-k9w7 - tar.124 - 3 g .JA1
    System software version: 12.4(3G) JA1
    The boot loader version: JA4 12.3 (2)

    I'm trying to create a bridge root bridge of relationship and I'm out of luck.

    they are on my desk in front of them, I tried different cisco configs and radio, keep going down.

    I tried express setup (where it requires an SSID) and a manual configuration (where the SSID is not required since I DO NOT NEED to a SSID for a simple communication from gateway to gateway).

    ex: http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008058f53e.shtml

    These two will link two buildings and each will have a switch on the other end.

    simple enough no VLAN etc.

    I begin to suspect the IOS versions that I can't find these versions of IOS in all documentation I looked for examples of configuration.

    This AP is very popular for use in severe environments as an AP not a bridge also to some bridges, you can use an omni antenna if the 1310 is the root for a mutiple no roots or the builtin antenna may not meet remotely you need and you can use a Yagi or dish for the link.

    If you use a single antenna, you will have to change it in the config you use right/primary only antenna. If you do not do this, try using the left/secondary antenna AP and the connection will fail because of the lack of an antenna, your other choice is to put an antenna on both connectors and not worry.

    There isn't that one radio, based on the communication software will pass the exit to the righht or left antenna if diversity is enabled

    the builtin antenna is vertically polarized so you shoud in stall the Yagi with vertical polarzation is polarization normal if you follow the antenna installation instructions. There is normally an arrow and the word to indicate the orientation of the antenna.

    Each AP may be at the root, don't forget to ecre evidence all coaxial connections.

    Yes, you learned that the tree covering weight works.

    Good luck

    Bill

  • What is the best way to list the numbers of page and page number ranges in my table of contents?

    I use the feature book to create a catalog.

    Thus, it consists of several files.

    Each file is a 'different' Section that Indesign is concerned.

    Here's my table of contents now:

    toc.PNG

    All page numbers are static.

    Each rounded rectangle, color corresponds to a section (which is a separate file). Some sections have subsections, some don't.

    The catalog changes over time, I would like that all page numbers in the table of contents of auto-update. Less work and less chance of human error.

    I noticed the text variable and tools of text to anchor, but so far have failed.

    What do you recommend?

    I decided to use text Variables.

    -J' I first define the header of each category as a Destination of the hyperlink text.

    - Then I insert a text Variable in the mounting spot in the table of contents, using my simplified page number text variable definition:

    Takes two text Variables with a hyphen between them to express a range of pages. It works well enough.

    A small tip is necessary to the last page of page number. I use a text in the large box in the mount table as a Destination of the hyperlink. He is never seen, but as long as he stays on the right page, it will always give me the page that I need - the last in this section:

  • 3.6.2 the numbers help find and remove duplicates in 2 columns

    Could someone help me please. I run a karaoke business. As you may have guessed I have books with many songs, 64 000 and more than 75% of these songs are duplicates so you can imagine by train to sort. Option 1 I could manually go through my list by removing duplicates or option 2 attempt to find a formula that works save me hours of blind deletion. Is there someone out there who can help? It would be much appreciated thanks.

    Here is a sample of the document I'm working.

    Hi robi.

    Here is a solution of Craig s. Ruddock in this discussion Re: duplicates warning formula

    Formula in B2 (fill down)

    = IF (COUNTIF($A,A) = 1",","duplicate")

    Now sort by column A

    Remove all but one of the "duplicate" lines for each song.

    Kind regards

    Ian.

  • What is the meaning of the numbers 2.0: and 3: who often appear on the left side of the pages of the user manual?

    This question relates to the text of the Firefox user manual

    Great detective work and wow, isn't that bring back memories.

    Pages corresponding to the chapters or sections of this manual updates on this site in the knowledge base, but I have not noticed a convenient table of contents and is not a way to download all in PDF format. At least, not yet.

  • V26, about the differences between Android and iOS

    I asked a question yesterday about the Adobe ID number that we use to create multiple Folio and track stats for Android, iPhone & iPad downloads etc.  Now that v26 goes direct, it won't really be a difference between the display of our publication on Android or Apple device. We use about images and texts, really no videos used.

    We used to create a good sharp vector folio for ipad, then reuse everything and put it all to "raster" and for Android devices. (we allowed just the device Android to the scale of our content)

    But I'm curious...

    Now that v. 26 allows PDF on the Android articles... There is really no need to create another option of folio for us.

    But what about the cost?

    If we just download the 1 folio to be viewed on both devices, how understand us what our publication is read on most of the platform?  The service determines DPS what folio will receive a user based on the device ID?

    just curious to see how this is handled.

    Thank you.

    Analytics is presented separately for each device. If you use SiteCatalyst, you can do various reports based on the type of device.

    Neil

  • format the numbers on network ft

    Hello

    On three different ECM installations on 3 different sites, the number of recipient (SDA) presented by the network on appeal entering is different (as seen in "debug ISDN standard")

    On UN 2811 / IOS 12.4 (24) T3, the SDA are presented with the associated type 9-digit

    On UN UC520, the SDA are presented on 10-digit

    On UN UC540W / IOS 15.1 (2) T2, the SDA are presented in 4 digits

    In the outbound direction, on the UC 520, simply give the number called with the right number of zeros pour the national or international (similar to a dialing on analogue line). On the other two, to remove the 0 and associate the right type (national or international, unknow, network...).

    Anyone an explanation of a t - he pay these incomprehensible differences? It comes from the configuration or Numeris line?

    It's bad enough, because every time we do a preparation workshop en and all and valid, on a a / 3 chance that it works at the customer...

    I note that CCA 3.0 completely overlook these settings, and dial-plan France doesn't in ISDN (except priori pour my example with the UC520).

    Besides numbering plan the proposed by CCA 3.0 is configured in such a way that the 0 from the beginning of the number called will disappear from display during the delivery. I have not yet tried the key bis, but I feel that it is wrong to do...

    Best regards;

    Philippe

    Hello to the worker on Saturday

    In principle, France Telecom sent 9-digit numbers (standard EuroNumeris + memory) if their connection node is updated. Pour the old facilities, the presentation of the numbers is done on the last 4 digits. Simply contact the after-sales Service FT pour ask them to pass the EU EuroNumeris +. But this is not always possible (depending on the Age of their node connection and the number of subscribers).

    Pour your UC500 which presents 10-digit numbers, is that the number went through a rule 'voice translation-rule.

    Hervé

  • How can I change the numbers in a numbered list

    Work in Acrobat Pro ms, Windows 10

    I have a numbered list that I'm trying to change. I deleted one of the numbered list items and now need to change the remaining numbers so that they are all consecutive. While in PDF Edit I can change the text using the normal keyboard shortcuts . but I can't change the numbers of.

    In change the cursor won't even go to the number.

    All advice is appreciated.

    Hi KJerryK,

    These numbers are trademarks of ball?

    If it you please change full text & then try to implement the numbering with bullet marks.

    Refer to this link for help Acrobat help. Edit PDF files.

    Kind regards

    Nicos

  • Numbers with decimals and text in a field

    Hello all, I have created a form to fill out pdf for use as a budget calculator. Many of the fields require the word "(reserved)" to be entered in the field, if there is no value. If I set the format of the number field, I can't type all the letters in the field. If I set the size to zero, I can type the numbers and letters, but it will not calculate if the numbers have commas and decimal points. Any ideas? Thank you!

    OK, something that will work is to add two functions to a JavaScript script at the level of the document:

    function reservedFormat() {}

    AFNumber_Format (2, 0, 0, 0, "", false);

    If (! event.value) event.value = "(reserved)".

    }

    function reservedKeystroke() {}

    AFNumber_Keystroke (2, 0, 0, 0, "", false);

    }

    Then set up the field with a custom Format and JavaScript typo that represents (respectively):

    Custom format JavaScript

    reservedFormat();

    Custom keystroke JavaScript

    reservedKeystroke();

    Here is an example of PDF file that demonstrates this: https://acrobat.com/#d=VCzfhUuUgB1GW2XQAh6Zyg

    That this fact is to use the same built-in routines that Acrobat uses when configure you a number format, but add the bit that displays the string "(reserved)" when the field is empty. This is done in the Format script since you just want to display this value and do not it field value when the field is empty. Note that if the value of the field is zero, it will appear not "(reserved)".

  • NETGEAR genius App does not display the numbers of traffic correctly with IOS 10 meter

    Since I've updated my Air Ipad 2 and Iphone 5 IOS 10.0.1, genius app on these 2 devices does not traffic counters numbers - the numbers are blacked out. Both devices have been updated to IOS 10.0.2 and numbers still are not displayed correctly. I've uninstalled and reinstalled the app on devices engineering and numbers are always blocked. I tried an old Ipad 2 which is not updated for IOS 10 and my desktop Windows 10 PC and the traffic engineering counter displays the numbers correctly. I called Netgear support, but they were not aware of this problem and so far do not have a solution. Someone has encountered this problem on their Apple devices? Thank you! Another question - is - it possible through the genius app for what it tell me the amount of use of band bandwidth/data device not only in total for all devices? Thanks again!

    Hey all

    I have forwarded this to our engineering team.

    There was another user who made the same case.

  • by the numbers, how can I convert a start time and end in hours time

    I convert my files to Excel, and no to not translate my formulas.

    I have a start time, end time, and hours, what formula should I use to have hours to calculate?

    Thanks for any help

    by the numbers, you can perform mathematical operations on time like this... assuming they are valid values for date/time...

    Assuming that one time is in cell A1 and the other is in A2, you can get the difference like this:

    = dur2hours(a1-a2)

  • select lines with garbage (not the numbers and point symbols)

    Hi all! I've got varchar2 column where users insert what they want. But this column is used for the value of numbers (from 0.00 to 100.00). How can I select only the number and the symbol dot:

    NVL (ABS (regexp_replace (Replace(Avalue,',','.'),'[^ 1, 2, 3, 4, 5, 6, 7, 8, 9, 0,.,]')), 0)

    Now, I need to select lines with symbols of the trash to correct errors. How do I "invert selection"? I mean by selecting only the lines that are composed of waste (except the numbers and the dot symbol).
    Thanks in advance.

    You can try this

    select trim(translate(replace(avalue,',','.'),'1234567890.','           ')) from dual
    

    If the symbols of the trash will be inserted then it will return that

Maybe you are looking for