The operation could not be completed: access denied

Similar Questions

• the operation could not be completed error 1035 com.apple.mobilephone

  I have phone 7 and a mistake on putting in place the reception of voice mail

  the operation could not be completed error 1035 com.apple.mobilephone

  Same error message, even tried operation. iPhone 6, iOS 10.0.1

• The action "Watch Me Do" has encountered an error. The operation could not be completed. (OSStatus error - 50.)

  Morning,

  • Material: Apple Macbook Air 13 ", mid-2013. 1.7 GHz Intel Core i7. 8 GB 1600 MHz DDR3. Etc...
  • El Capitan software to. 10.11.2
  • Automator to. 2.6 (419)

  I'm trying to automate downloads via iTunes take place during early in the morning to avoid using bandwidth more expensive. The operation (my apologies if I have the wrong terms, not a tech guy) fails and returns this error:

  The action "Watch Me Do" has encountered an error.

  The operation could not be completed. (OSStatus error - 50.)

  

  Is that what everyone has seen, or to which there is a known solution?

  Concerning

  James

  Watch Me Do is designed to replay the same click of mouse and keyboard events to the same speed.  Think of driving your car to work and record each turn and stop.  Then play each round and down at the same speed.  What to do if while reading the traffic moves a little faster or a little slower?  If you drive the same route to work, you could get a red light at an intersection that you had a green light to yesterday.  "Watch Me" does not know how to deviate from these changes, so he'll just to stop and report an error.  If iTunes launches slower or an event during playback takes longer to achieve because of different background running processes, it will have the same effect.

  Allowing automatic downloads in iTunes and help Automator to activate your device network at a specific time might be a better solution.

• CC bridge continues to stop, says "the operation could not be completed.

  CC bridge continues to stop, says "the operation could not be completed", when I try to select some images.  I click a different folder and locking the bridge

  Hi deankirkland,

  Please reset the Bridge preferences and then try it.

  Measures

  Start Adobe Bridge, and immediately press Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS down) until the dialogue box reset settings appears.

  Select all three options - reset preferences, reset Standard Workspaces and all miniature Purge Cache - and then click OK.

  Reference: troubleshooting errors, freezes | Adobe Bridge | Windows, Mac OS

  Let us know if it works.

  Kind regards

  ~ Mohit

• Registration for the web function has stopped working in my copy of photoshop elements 12.  I get this message "the operation could not be completed.  The system cannot find the path specified"reset preferences was not fixed.

  Registration for the web function has stopped working in my copy of photoshop elements 12.  I get this message "the operation could not be completed.  The system cannot find the path specified"reset preferences was not fixed.

  My os is windows 7.  elements of 12 worked fine for several months and then save for web stopped working

• Save for Web and devices, the operation could not be completed

  I get this error when I save for Web and devices: the operation could not be performed.

  I saved to the web before for many more complex images, largest and without a hitch.

  I use a psd format with an image that I designed. It is no more complex than others I've done. It is small, just a horizontal navigation bar about the size of the one on Apple's site.

  I tried exporting, flattening, slicing it remove the slices.

  I think it's a problem with the application itself.

  I tried to fix my permissions, restart and held cmd, Opt, Control, Shift when starting PS to reset the settings. Any idea would be appreciated.

  Try to pass like a Flash, and then delete your backup for web Pref.

  http://KB.Adobe.com/selfservice/viewContent.do?externalId=kb405012

• Error "the operation could not be completed" - made bridge to freeze

  I just installed the latest version of the bridge and use it for the first time to organize the images for a video project.  By browsing through my media in the content window, I'll try to rename lot a group of clips by selecting them all, but sometimes (maybe half the time or more) when I pointed out, I get an error that says: 'the operation failed. "  I'll hit Ok, and now my Bridge seems to be half-frozen.  I say half, because I can always rename batch, but now I can't navigate further through the different folders in the content tab and the only thing that works is coming out completely and restart Bridge.  Restarting bridge is also a problem, because I can't CMD + Q, or right click and quit smoking, I have to CMD + ALT + Esc and force him to leave.

  I use the latest version of Yosemite (10.10.5) and wonder if this is the problem, or does anyone else have this problem as well.  I'm running the 6.1.1.10 bridge.

  Hi Jeff,

  Please make sure that you have the latest version of QuickTime and bridge CC to date.

  You can see this article resolve errors, freezes | Adobe Bridge | Windows, Mac OS

  Let us know if this helps
  ~ Assani

• Photoshop CC 2015.1.1 update, error starting, "the operation could not be completed.

  This error has been reported several times in the past month. I am suspect of the most recent update of Photoshop CC 2015 that this error was not a problem before this specific update and I used Adobe CC for years, including Photoshop and have never had a problem.

  As reported, during the startup application, I get the following error.

  

  I uninstalled the application by using the uninstall program Adobe (Utilities folder) and have had no success. Error continues. I pressed the "Shift" key to start without third-party plugins (which there should be none after removing the application and preferences. No help. A note that the application, after you click 'OK' to confirm the error opens ever-so-press briefly (perhaps five to seven seconds) but just as quickly crashes.

  Honestly, I don't think that there is a problem with Adobe CC by saying given that other current applications (InDesign, 2015, Muse 2015, prelude 2015, Acrobat, etc.) open them all very well. It seems that Photoshop and only the last (current) version.

  I suspect that as it is, that this version of Photoshop is more compatible with my older iMac (graphics card). Here's some basic info:

  Model: iMac7, 1, Intel Core 2 Duo, 2.4 GHz, 4 GB, MSC 1.21f4

  Graphics card: ATI Radeon HD 2600 Pro, ATI, RadeonHD2600, PCIe, 256 MB

  Memory module: DIMM0/0 BANK, 2 GB, 667 MHz, DDR2 SDRAM

  Memory module: 1/DIMM1 BANK, 2 GB, 667 MHz, DDR2 SDRAM

  This simple upgrade can be a more expensive if I am forced now to upgrade my computer . Any help would be appreciated.

  It is a known issue, I logged bugs on this subject a few weeks ago. He is still being worked on. The only solution for now is to install the previous version (CC 2015 16.0).

• Adobe Bridge CS6 - Error Message "the operation could not be completed.

  I'm now all of a sudden, the message above:

  Here are the basics of what I use:

  iMac 24 "Desktop

  10.9.5 software version

  CS6 - bridge 5.0.2.4 (impossible to 6.0.1 for some reason any?)

  I tried many things

  (1) re - install complete bridge (twice)

  (2) Held the Option button down and all 3 options selected

  Customer service sent me here because they seem to be all about personal tech personal support to talk.

  Hi StevePena

  Please see Troubleshooting of errors, freezes | Adobe Bridge | Windows, Mac OS

  Try the steps mentioned let us know if that helps.

  Concerning

  ~Assani

• Print spooler is not working, printers are missing from the printers and faxes, add a printer failed with operation could not be completed

  Hi all
  We have a problem on one of our field of PC:

  • Parts of the printer in printers and faxes are missing.
  • The print spooler service stops.
  • Add Printer failed with the operation could not be completed error

  Have tried the steps:

  1. Restart the print spooler service
     The service could be restarted, but stops again when I tried to do something in the windows printers and fax machines, such as adding a printer, or open the properties of the server.
  2. Follow the steps in Bruce Sanderson Web Windows http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm and http://members.shaw.ca/bsanders/FAQPrinting.htm
     All the steps have been followed, but still could not solve the problem.
  3. Follow the steps in the printer problems in Windows http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows
  4. Run sfc/scannow
  5. Run Chkdsk C:/f/v
  6. Run utility HP diagnostic Print as suggested by http://www.theeldergeek.com/forum/index.php?showtopic=17339

  I'm out of ideas.  Someone please suggest what to do about it.

  TIA

  ELL

  Hi all

  Fixed a problem.

  It turns out the key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Providers must be cleaned too - delete all subkeys (and their values) EXCLUDES the Internet Provider LanMan Print Services and printing keys (and their values).  A reboot is required.

  Hope it will be useful for people who have this problem in the future.

  Thanks for these folks spend their time to respond or read my question.

  See you soon,.
  ELL

• "Cannot change the priority. The operation could not be performed. Access denied. "

  When you attempt to change the priority of a process in the Task Manager (no matter what process, I've tried a few) I get the error message: cannot change the priority. The operation could not be performed. Access denied. It is while being logged on as an administrator. Would appreciate a solution.

  Since Windows Vista and Windows 7, a logon administrator account always uses a standard or limited account for certain purposes. To access these properties, you can run a program using the "Run as administrator". To run as an administrator, you right-click on a program and select "Run as Administrator" in the right click menu.

  Some processes of the system, such as services, you cannot change even as an administrator.  Come on in "show processes from the user all the" which will ask for permission. Then reopen the task Administrator Manager and then see if you can change the priority.

• Try to install the printer HP LaserJet 5if gives errror "operation could not be completed.

  Win7 + HP LaserJet 5if

  Hello, I have instaled windows 7 RC, and I try to add network printer HP LaserJet 5if.
  Windows has been find printer, but when he tries to install the driver I see massage:

  Printer driver has not been installed.
  Operation could not be completed (error
  0 x 0000002).

  No idea which can change to install this printer?

  Hi kkriss,

  Thank you for using answers Forum.

  The network printer is connected to a XP computer?
  Are either using a 64-bit version of Windows?

  I suggest visiting the manufacturer's Web site to see if they have Windows 7 drivers or at least Vista drivers.

  I also propose to sign in as an administrator to install the printer.

  Please let us know if that helps.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Operation could not be completed (0x00000005). Access is denied

  I'm the admin of a school district.  We are migrating to Windows 7.  I have several print, 32 and 64-bit servers in any district that controls anywhere from 3 to 12 network printers.  All printers are IP based, but each segment has a server that manages the print queue and printer.  I've recently updated printer drivers on each server to facilitate the required drivers for Win7 desktop.  I have configured printers on each workstation for respective printers, they must have access to and did under a computer administrator account.  Everything works fine.  When that I log out and back in as a domain user, the printers disappear or appear with the above error.  User accounts that I try to connect as student accounts and of teachers; two have limited access to the PC as the domain.  Group policies are in force throughout.  For the previous (Win2k, XP) operating systems, this has never been a problem, and to this day, these machines can always print to network printers.  What is this error and how to eliminate it?

  Hello

  The issue of Windows 7, you have posted, suitable for the IT Pro TechNet public. Please post your question in the TechNet forum. Please post your question in the below mentioned link:

  http://social.technet.Microsoft.com/forums/en-us/winserverprint/threads

  Kind regards

  GauravPrakash - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• message operation could not be completed (error 0x800f0214) of windows 7 with HP laserjet cm1312nfi

  Hi I'm transitionning to a new computer with windows 7 64 bit and I can download the driver from hp site but when I get to unpack it, I get the above message.

  Can someone help me with this?

  Thank you

  Hello Lucprovost,

  Please keep us updated on the status of the issue.

  I suggest you try to use the suggestions contained in this Microsoft support article and check the issue.
  Reference:
  You experience print spooler error messages after installing or upgrading a third-party print driver
  http://support.Microsoft.com/kb/2793718

  Also, refer to the suggestions marked as answer by moderator Dale Qiao Wednesday, may 5, 2010 01:22 in this link:
  http://social.technet.Microsoft.com/forums/Windows/en-us/4979f1a9-f54e-4c5f-8199-c98315dc53cc/error-adding-printers-on-Windows-7-client-after-deployment-0x00000709?Forum=w7itproinstall

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  I hope this information helps.

  Thank you

• Contacts: The operation could not be performed. No other information is available on the problem.

  I get the following error message in 9.0 (1679.4) on El Capitan (10.11.3) Contacts:

  https://www.dropbox.com/s/pytyhw5den07k8s/screenshot%202016-02-01%2009.39.33.PNG? DL = 0

  How can I know what is the problem?

  Thank you

  Dave.

  MacBook Pro 13 "

  https://www.dropbox.com/s/njohts2d2dnspz8/screenshot%202016-02-01%2009.42.41.PNG? DL = 0

  Why you get this message? You want to open the Contacts?

  Before you answer that:

  stop the Mac, start the mac while holding the SHIFT key: mac begins (a little slower) in safe mode, connection, open the Contacts, you get the same question?

  Restart and try again.

  Post answers here.

  Lex