The operation on the file "/... /... vmdk ' failed

Similar Questions

• System 32 error (0x00000020): "the process cannot access the file because it is being used by another process.". The operation to open the file will fail with error - 1032 (0xfffffbf8(JET_errFileAccessDenied))"

  Original title: svchost (1020)

  Event type: error
  Event source: ESENT
  Event category: general
  Event ID: 490
  Date: 2010-10-19
  Time: 14:51:34
  User: n/a
  Computer: ROB
  Description:
  Svchost (1020) an attempt to open the file "C:\WINDOWS\system32\CatRoot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb" for read / write access failed with the error System 32 (0x00000020): "the process cannot access the file because it is being used by another process.".  The operation to open the file will fail with error - 1032 (0xfffffbf8(JET_errFileAccessDenied)).

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Hi Robrw,

  1. when exactly you receive this error?

  2. don't you make changes to the computer before this problem?

  You can try to rename the catroot2 folder and check if it helps.

  Step 1:

  a. Click Start and in run type C:\windows\system32 and click ok

  b. find the Catroot2 folder. Right-click on Catroot2 and rename it to Catroot2.old

  If you are not able to do the normal mode, try to start in safe mode and rename

  Check out the link for more information on starting your computer in SafeMode below:

  http://support.Microsoft.com/kb/315222

  Step 2:

  If you are unable to access the catroot2 folder, and then try to change the permissions on the files and check if it helps.

  See the following article:

  How to capture a file or a folder in Windows XP

  http://support.Microsoft.com/kb/308421

  Step 3:

  You can also try to temporarily disable third-party security software and firewalls and check what is happening.

  Note: Activate the security software after the resolution of the problem.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• ORA-09817: write the file verification failed

  Dear all,
  
  Enter the user name: sys as sysdba
  Enter the password:
  ERROR:
  ORA-09817: write the file verification failed.
  Linux-x86_64 error: 28: no space is available on the device
  Additional information: 12
  ORA-09945: failed to initialize the audit trail file
  Linux-x86_64 error: 28: no space is available on the device
  
  When I m trying to connect to the database I m getting this error.
  
  When I do a df
  
  + / dev/sdf 165139820 158449288 0 /u01 + 100%
  
  Its 100% can all the files I need to remove to connect to the database
  
  I tried to move adump files to another drive as / u01 player say only 100%
  
  I m using 11g it please can someone help me a this.
  
  Thank you and best regards,
  Hiroji gallot

  You should monitor your space... Do not let the problem happened just because you forgot to monitor by simple command (df - h), please mark this thread as answered.

• How can I recover the files of failed hard drive

  Hello

  Apparently, my hard drive failed on my HP.  I'm running Windows XP with the latest service pack.
  I get a black screen that says "disk error, press ctrl + atl + del to restart".
  Given that it is a 7 year old computer, I don't see the need to put a lot of effort in intensive care there.
  But I would like to get some of the files on the hard drive.
  Can anyone suggest a way to access the contents of the hard drive?  I would like to get some Word, excel, PDF files.  Nothing major.
  Thank you
  AS

  Hello

  If the drive has indeed failed then you need professional services which are very expensive. Best
  method would be to contact your local computer store, the other his own service in-house, and have
  check out them the disc. Eventually, they can recover your files and they know all local professional
  services available in your area.

  A professional collection agency is Kroll OnTrack. Others are using Bing or Google.

  Kroll OnTrack
  http://www.krollontrack.com/data-recovery/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Operation failed on the file "*.vmdk.

  I'm relatively new to VMWare, but have been using it to access my admin area machine now for a few months with no problems.

  Earlier this week, we had some electrical problems, and since then I get this error.

  The machine can stay here without problems if I do nothing, but once I have work for a few minutes the error rears its head.

  Any help would be great, thanks!

  

  Which command line option did you use? You can try chkdsk d: /f /r

  André

• ORA-09817: write the file verification failed. ORA-09945: failed to initialize one

  Hello gurus,
  
  I am getting error below when I try to connect to the DB. DB version 11.2.0.3, AIX server.
  

  sqlplus / as sysdba
  
  SQL*Plus: Release 11.2.0.3.0 Production on Mon Apr 8 13:08:39 2013
  
  Copyright (c) 1982, 2011, Oracle.  All rights reserved.
  
  ERROR:
  ORA-09817: Write to audit file failed.
  IBM AIX RISC System/6000 Error: 28: No space left on device
  Additional information: 12
  ORA-09945: Unable to initialize the audit trail file
  IBM AIX RISC System/6000 Error: 28: No space left on device

  I went to see that place that has enough space.
  

  Filesystem    GB blocks      Free %Used    Iused %Iused Mounted on
  /dev/var_opt_audit      6.00      4.75   21%   225253    16% /var/opt/oracle/audit

  I don't know what is the problem and I do not see DB process.

  At the level of the operating system, go to each of these directories and do a ls - rtl | tail and ls - rtl | head and, finally, ls-l | WC - l. That should give you an idea of what files are written last, and who is the oldest, and how they are. You can also watch the larger (and you may need to search recursively to find the real directories being written). You will need to decide what to do with them. See your system administrator and ask why she has not followed to use the space.

• Error message from the computer - SHWICONXP9106 - Load Configuration of the file has failed

  I got my Windows 7-64 bit system, which is now 13 months old, lock upwards and closed twice in a week.  I get a strange error message that says "SHWICONXP9106 - load Configuration File Failed".  It seems that this is a card I ever use.  It is a work computer that I rarely do anything whether online with.  He did re - starts and begins to funny click on my Tower.  It takes in telling the system to start windows normally and after stopping power, twice, I can get it to restart very well.  can someone let me know if I need to get a new hard drive again?  This system is only 13 months old?

  If you do not, you might want to see if it can be disabled at startup:

  1. Press simultaneously on key Windows + R .

  2. type MSConfig in the box, and then click OK.

  3. Select the Startup tab.

  4. find SHWICONXP9106 (if its there) & uncheck the box against it. Click OK.

  5 reboot & see what happens.

  All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

• The file check failed error during duplication of database with RMAN

  I am using oracle 10 g R2 database and try to make a clone of the orcl database source on the same machine but with the structure of different directory with the name of test.
  
  When I run the command duplicate to create the test database, then the following error message is generted:
  

  D:\>rman target sys@orcl nocatalog auxiliary /
  
  Recovery Manager: Release 10.2.0.1.0 - Production on Fri Nov 11 12:13:26 2011
  
  Copyright (c) 1982, 2005, Oracle.  All rights reserved.
  
  target database Password:
  connected to target database: ORCL (DBID=1264668332)
  using target database control file instead of recovery catalog
  connected to auxiliary database: TEST (not mounted)
  
  RMAN> @script.txt
  
  RMAN> Run {
  2> Allocate channel C1 type disk;
  3> allocate auxiliary channel 'adisk_0' type DISK;
  4> duplicate target database to "test";
  5> #BACKUP INCREMENTAL LEVEL 1 DATABASE;
  6> #BACKUP INCREMENTAL LEVEL 1 CUMULATIVE DATABASE;
  7> #BACKUP INCREMENTAL LEVEL 0 DATABASE;
  8> #delete obsolete;
  9> }
  allocated channel: C1
  channel C1: sid=140 devtype=DISK
  
  allocated channel: adisk_0
  channel adisk_0: sid=157 devtype=DISK
  
  Starting Duplicate Db at 11-NOV-11
  
  contents of Memory Script:
  {
     set until scn  12926250;
     set newname for datafile  1 to
   "D:\TEST\ORADATA\SYSTEM01.DBF";
     set newname for datafile  2 to
   "D:\TEST\ORADATA\UNDOTBS01.DBF";
     set newname for datafile  3 to
   "D:\TEST\ORADATA\SYSAUX01.DBF";
     set newname for datafile  4 to
   "D:\TEST\ORADATA\USERS01.DBF";
     set newname for datafile  5 to
   "D:\TEST\ORADATA\EXAMPLE01.DBF";
     set newname for datafile  6 to
   "D:\TEST\ORADATA\GL.DBF";
     restore
     check readonly
     clone database
     ;
  }
  executing Memory Script
  
  executing command: SET until clause
  
  executing command: SET NEWNAME
  
  executing command: SET NEWNAME
  
  executing command: SET NEWNAME
  
  executing command: SET NEWNAME
  
  executing command: SET NEWNAME
  
  executing command: SET NEWNAME
  
  Starting restore at 11-NOV-11
  
  channel adisk_0: starting datafile backupset restore
  channel adisk_0: specifying datafile(s) to restore from backup set
  restoring datafile 00001 to D:\TEST\ORADATA\SYSTEM01.DBF
  restoring datafile 00002 to D:\TEST\ORADATA\UNDOTBS01.DBF
  restoring datafile 00003 to D:\TEST\ORADATA\SYSAUX01.DBF
  restoring datafile 00004 to D:\TEST\ORADATA\USERS01.DBF
  restoring datafile 00005 to D:\TEST\ORADATA\EXAMPLE01.DBF
  restoring datafile 00006 to D:\TEST\ORADATA\GL.DBF
  channel adisk_0: reading from backup piece D:\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2011_11_07\O1_MF_NNND0_TAG20111107T220822_7CJ
  P
  channel adisk_0: restored backup piece 1
  piece handle=D:\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2011_11_07\O1_MF_NNND0_TAG20111107T220822_7CJ44MH4_.BKP tag=TAG20111107T220
  channel adisk_0: restore complete, elapsed time: 00:01:46
  Finished restore at 11-NOV-11
  sql statement: CREATE CONTROLFILE REUSE SET DATABASE "TEST" RESETLOGS ARCHIVELOG
    MAXLOGFILES     16
    MAXLOGMEMBERS      3
    MAXDATAFILES      100
    MAXINSTANCES     8
    MAXLOGHISTORY      292
   LOGFILE
    GROUP  1 ( 'D:\TEST\ORADATA\REDO01.LOG' ) SIZE 50 M  REUSE,
    GROUP  2 ( 'D:\TEST\ORADATA\REDO02.LOG' ) SIZE 50 M  REUSE,
    GROUP  3 ( 'D:\TEST\ORADATA\REDO03.LOG' ) SIZE 50 M  REUSE
   DATAFILE
    'D:\TEST\ORADATA\SYSTEM01.DBF'
   CHARACTER SET WE8MSWIN1252
  
  
  contents of Memory Script:
  {
     switch clone datafile all;
  }
  executing Memory Script
  
  datafile 2 switched to datafile copy
  input datafile copy recid=1 stamp=766930525 filename=D:\TEST\ORADATA\UNDOTBS01.DBF
  datafile 3 switched to datafile copy
  input datafile copy recid=2 stamp=766930525 filename=D:\TEST\ORADATA\SYSAUX01.DBF
  datafile 4 switched to datafile copy
  input datafile copy recid=3 stamp=766930526 filename=D:\TEST\ORADATA\USERS01.DBF
  datafile 5 switched to datafile copy
  input datafile copy recid=4 stamp=766930526 filename=D:\TEST\ORADATA\EXAMPLE01.DBF
  datafile 6 switched to datafile copy
  input datafile copy recid=5 stamp=766930526 filename=D:\TEST\ORADATA\GL.DBF
  
  contents of Memory Script:
  {
     set until scn  12926250;
     recover
     clone database
      delete archivelog
     ;
  }
  executing Memory Script
  
  executing command: SET until clause
  
  Starting recover at 11-NOV-11
  channel adisk_0: starting incremental datafile backupset restore
  channel adisk_0: specifying datafile(s) to restore from backup set
  destination for restore of datafile 00001: D:\TEST\ORADATA\SYSTEM01.DBF
  destination for restore of datafile 00002: D:\TEST\ORADATA\UNDOTBS01.DBF
  destination for restore of datafile 00003: D:\TEST\ORADATA\SYSAUX01.DBF
  destination for restore of datafile 00004: D:\TEST\ORADATA\USERS01.DBF
  destination for restore of datafile 00005: D:\TEST\ORADATA\EXAMPLE01.DBF
  destination for restore of datafile 00006: D:\TEST\ORADATA\GL.DBF
  channel adisk_0: reading from backup piece D:\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2011_11_09\O1_MF_NNND1_TAG20111109T223628_7CO
  P
  channel adisk_0: restored backup piece 1
  piece handle=D:\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2011_11_09\O1_MF_NNND1_TAG20111109T223628_7COGJZVT_.BKP tag=TAG20111109T223
  channel adisk_0: restore complete, elapsed time: 00:00:07
  channel adisk_0: starting incremental datafile backupset restore
  channel adisk_0: specifying datafile(s) to restore from backup set
  destination for restore of datafile 00001: D:\TEST\ORADATA\SYSTEM01.DBF
  destination for restore of datafile 00002: D:\TEST\ORADATA\UNDOTBS01.DBF
  destination for restore of datafile 00003: D:\TEST\ORADATA\SYSAUX01.DBF
  destination for restore of datafile 00004: D:\TEST\ORADATA\USERS01.DBF
  destination for restore of datafile 00005: D:\TEST\ORADATA\EXAMPLE01.DBF
  destination for restore of datafile 00006: D:\TEST\ORADATA\GL.DBF
  channel adisk_0: reading from backup piece D:\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2011_11_10\O1_MF_NNND1_TAG20111110T221428_7CR
  P
  channel adisk_0: restored backup piece 1
  piece handle=D:\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2011_11_10\O1_MF_NNND1_TAG20111110T221428_7CR1MQFO_.BKP tag=TAG20111110T221
  channel adisk_0: restore complete, elapsed time: 00:00:16
  
  starting media recovery
  
  archive log thread 1 sequence 524 is already on disk as file D:\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2011_11_11\O1_MF_1_524_7CS
  C
  archive log filename=D:\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2011_11_11\O1_MF_1_524_7CSG2HVT_.ARC thread=1 sequence=524
  media recovery complete, elapsed time: 00:00:14
  Finished recover at 11-NOV-11
  
  contents of Memory Script:
  {
     shutdown clone;
     startup clone nomount ;
  }
  executing Memory Script
  
  database dismounted
  Oracle instance shut down
  
  connected to auxiliary database (not started)
  Oracle instance started
  
  Total System Global Area     230686720 bytes
  
  Fixed Size                     1248236 bytes
  Variable Size                 67109908 bytes
  Database Buffers             155189248 bytes
  Redo Buffers                   7139328 bytes
  sql statement: CREATE CONTROLFILE REUSE SET DATABASE "TEST" RESETLOGS ARCHIVELOG
    MAXLOGFILES     16
    MAXLOGMEMBERS      3
    MAXDATAFILES      100
    MAXINSTANCES     8
    MAXLOGHISTORY      292
   LOGFILE
    GROUP  1 ( 'D:\TEST\ORADATA\REDO01.LOG' ) SIZE 50 M  REUSE,
    GROUP  2 ( 'D:\TEST\ORADATA\REDO02.LOG' ) SIZE 50 M  REUSE,
    GROUP  3 ( 'D:\TEST\ORADATA\REDO03.LOG' ) SIZE 50 M  REUSE
   DATAFILE
    'D:\TEST\ORADATA\SYSTEM01.DBF'
   CHARACTER SET WE8MSWIN1252
  
  released channel: C1
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-03002: failure of Duplicate Db command at 11/11/2011 12:16:21
  RMAN-06136: ORACLE error from auxiliary database: ORA-01503: CREATE CONTROLFILE failed
  ORA-01504: database name 'TEST' does not match parameter db_name 'orcl'
  
  RMAN> **end-of-file**
  
  RMAN>

  Script.txt
  

  Run {
  Allocate channel C1 type disk;
  allocate auxiliary channel 'adisk_0' type DISK;
  duplicate target database to "test";
  }

  Kindly help?
  
  Published by: Moazzam November 11, 2011 12:22

  Your definition of the Windows service uses a different inittest.ora or spfiletest.ora - not the one that you have edited.

  Hemant K Collette

• Im trying to install a patch for star wars force unleashed, then I get an error: extraction of the file has failed it's probably caused by low memory,...

  Tried everything, even a new installation of the game, still the same error. I downloaded the latest drivers and directX

  Hello Mohab_93, did rise to application of the remedial program with a UAC prompt?

  If not, then you will probably need to run it by double clicking it and selecting run as administrator. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• Help - file vmdk is deleted by accident

  Hello

  Stupidly, I managed to delete some vmdk files - I still have the server - flat hard of however.

  I can recreate the file vmdk somehow?

  Thank you - quick response until all reviews would be appreciated!

  This reference will help you:

  http://communities.VMware.com/thread/73513

  http://zealkabi.blogspot.com/2009/05/How-to-recreate-VMDK-file-when.html

  http://www.itexperience.NET/2008/03/03/HOWTO-recreate-VMDK-files/

  Shan

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!

• Operation failed on the file hard :( How to fix?

  I just cloned a Windows 10 VM in Vmware Workstation Pro12.0.0 build-2985596.  The VM source worked very well.

  When I try to start the clone I get the message:

  Operation failed on the file "C:\Users\username\Documents\Virtual Machines\Windows 10 Insider\Windows 10 x 64 - cl1 - s007.vmdk.

  Help...

  Dave

  Looks like it was the real problem of IO - chkdsk/s and reclone fixed it.

  Dave

• The operation on the (...) file has failed. Windows 7 - 10 VMWorkstation

  Hey vmware community,.

  Today, I have a problem I did not before. I opened my VMware and wanted to start my vm. Suddenly he opened a small error message with this tag in the breast:

  Operation failed on the file "C:\VMWare\Windows XP-000007 - s001.vmdk.

  If the file is located on a remote file system, make sure that the network connection and the server on which resides this disk to work correctly. If the file is saved on a removable medium, link media.

  Select Retry to retry the operation.

  Click Cancel to end this session.

  Select continue to pass the error to the guest operating system.

  When I click Retry, the message opens again.

  When I click on cancel, it stops.

  When I click on continue, the message appears again.

  In the internet I've found solutions for mac systems, but I have a Windows 7 system. And btw, the virtual machine is win xp if it is relevant.

  Can someone tell me what I have to do, to solve this problem?

  Thank you

  BTW. Sorry for my bad English, im German.

  I wouldn't like that
  We had to throw the last snapshot. vdiskmanager r was not able to repair the holes in the graintable

• Operation failed because the file already exists

  Hello

  I have a quick question and I don't know how to fix it.

  I used VMWare vCenter to migrate and existing virtual machine, he got stuck and failed.

  I went to Virtual Infrastructure delete the virtual machine but for some reason still exist some files and I see the files allocated for this purpose.

  I tried to migrate it again and I get the following error

  Operation failed because the file already exists

  Cannot create disk virtual /vmfs/volues/xxxxxxxxxxxxxxx/FreeBSD/FreeBSD.vmdk

  How can I manually delete this file (s)?

  Thank you

  Paulo

  Is it possible that I can manually delete these files?

  One way is using the data store browser (right click on the data store and select Browse).

  WARNING: it is not an undelete function

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• CoreTelephony error in trace file as a file for coretelephony tracing operation has failed, perhaps you need more disk space. Details "error opening the file/tmp/ct.shutdown, err = operation not permitted

  I got this error:

  "CoreTelephony Trace file error
  A file for CoreTelephony tracing operation failed, you might run out of disk space. Details "error opening the file/tmp/ct.shutdown, err = operation not permitted"

  I tried to solve it by searching for CoreTelephony errors. Could not resolve yet.
  Software does not, especially of photoshop...

  Any ideas?

  Same thing here, iMac with OS X 10.11.6. All started a couple days ago. Have not found any valid solution online yet, I tried rebooting in recovery mode and check disk, but it seems that everything is ok with the drives and permissions.

• My version of 11 items seems to have corrupted so I deleted and tried to download another copy. The operation has failed with a message "Adobe reader could not open... because it is not a supported type, file or because the file has been damaged."

  My version of 11 items seems to have corrupted so I deleted and tried to download another copy. The operation failed with the message "type of Adobe reader could not open... because it is not a supported or because file that the file has been damaged. Help please!

  You can also download the demo version of the software directly to that linked page below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Photoshop/Premiere Elements 11: l http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm