The output on my Macbook Pro is not giving me the drop-down list, & happens either in the port of the helmet or digital port and neither one is what I need. I tried turning off the computer and hold "Shift"' Control', 'Option' with the power-o ".

The output on the sound output box has no drop downs. The audio output suddenly disappeared and when I went to the 'exit' sound in 'sound preferences' the only thing that would show was the headphones.  After that I tried a couple of things suggest that 'Helping Apple', sometimes in digital form & everything that happens you can't change for something else.  Things I've tried suggested by Apple press help were the "Shift control option buttons & button / stop at the same time."  or press the Option, the command, the P & R key as soon as possible after you have pressed the button On.  Hold down until after the second gong during a manoeuvre.   This did cause the digital option, but none of these 2 is the one I need.  Help

Perhaps, it would be useful to know what that is exactly the one you need. Are get you an external speaker output or anything like that. Also, it would be useful to know the operating system you are using.

Tags: Notebooks

Similar Questions

  • Problems with HR 9Printed Documentation do not display windows popup, drop-down lists and links

    Generate a Word document for reviewers. PrintedDoc properties include: maintain links Hypertext; Include text from the drop-down; Include text enlargement.

    • Sometimes the Word 2010 document contains links, sometimes it doesn't.
    • Pop-up windows does not work normally in the document Word.
    • Menu drop-down and expanding text appear intermittently in the Word document.

    Has anyone experienced this and have a solution?

    Thank you.

    Carol

    I have never known failure except in two cases, hyperlinks.

    1. The target field is not in the printed document. It cannot obviously a link to something that does not exist.
    2. The hyperlink is a popup.

    Not sure what you mean by popups not working only not in a printed document. If you mean that links to these break, then see above. Known issue.

    I don't know why you are having the drop down list, growing problem of text that I didn't know that it is a problem either. Is it always the same drop down menus that fail? Have you compared a good drop-down list and a bad dropdown?

    Take a look at the Documentation printed on my site.

    See www.grainge.org for creating tips and RoboHelp

    @petergrainge

  • Photosmart HP 7520: AdobeRGB1998 is not a choice in drop-down list HP Photosmart printer 7520 features color management

    Is there an available profile or other way to get Adobe RGB (1998) appear in this drop-down list?

    The corrected version of gamma is slightly different from the workspace I use in Photoshop.

    Any help is appreciated.

    Hey Joe,

    Welcome to the Community Forum of HP.

    You can take a look at the following...

    It was written to explain the use of ICC profiles on your printer Photosmart 7520; Maybe you can extrapolate what you need for the Adobe RGB profile special that you want to use.

    Management of color printers

    Click on the thumbs-up Kudos to say thank you!

    And... Click on accept as Solution when my answer provides a fix or a workaround!

    I am happy to provide assistance on behalf of HP. I do not work for HP.

  • Not working not in muse adobe drop-down list

    Hi my combo muse does not work when I export my files to html. While working on the company calatyst ID my id is: http://russiaworldcup2018com.BusinessCatalyst.com/teams.html Please help

    [Ask in the correct forum allows... Left non-technical Forum Lounge for forum specific program... MOD]

    Fredo,

    I see that you use an external widget for your layout of the menu, and it looks like a defect of this widget.

    You need to contact the developer of the widget - Muse for you shop and ask them how you will be able to show submenus?

    Thank you

    Ankush

  • After trying to install the updates. my computer is now stuck in constant reboot mode while showing "Configuring updates 3 of 3 0%, do not turn off your computer.

    Visa update problem

    After trying to install the updates.  my computer is now stuck in constant reboot mode while showing "Configuring updates 3 of 3 0%, do not turn off your computer.  I tried to follow the instructions provided here because it seemed to be the same problem.  But when I restart and hold down the F8 key so I can boot into safe mode, I tried selecting safe mode and I get the same results, and I tried again by selecting the option 'Disable automatic reboot' which seems to be an option on the same page with the option of safe mode.  Whatever it is, the same message comes back and I can never get to where I can see my desktop to click 'start '.  I can't get out of this cycle.  I installed the update because it said I needed to install it.

    *************************************************************************************************************************************************

    Turn off your computer by holding the power button for about 20 seconds.
     
    Start your computer in safe mode: press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears
     
    Disable the automatic restart in the event of system failure:
     
    • Click Start
    • Click on Control Panel
    • Click on system and Maintenance link.
    • Click on the system link
    • In the left pane, click Advanced system settings
    • Locate the startup and recovery area, click the settings button.
    • In the startup and recovery window, uncheck the box next to automatically restart.
    • Click OK in the startup and recovery window
    • Click OK in the System Properties window
    • Close the system window
     
    After that... While STAYING in safe mode I do a system restore and maybe try a manual install of the update later.
     
    For the sake of space I refer you to the article about how to proceed.
     
     
     
    Please let us know if this solution works for you

    Theresa
    Microsoft Answers Support Engineer

    Hello

    the link below is how to download and get a vista disk startup repair, which you can start from the

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

    It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

    Change boot order it do dvd drive 1st in the boot order

    http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  • Trying to install the CS4 update but old software not in the drop-down list

    CS4 was installed on my XP machine in 2010 - and I remember having to call support because the previous version, I had (Studio 8) was not part of the drop-down list where you select your old version.

    Now my XP computer is about to be deleted and I tried to re - install CS4 on my Win7 machine. Once again - same problem.

    I have a Studio 8 serial number... and Studio MX too. But neither in the drop-down list.

    Please notify.

    Contact by web chat support and ask them to generate a series of work for you.

    Mylenium

  • Width of drop-down list and the number of drop-down list values

    How to increase / decrease the width of a drop-down list on the screen of your interview? In addition, how you increase the number of menu options drop-down user, some of my options in drop-down list don't show up. This shows only 3 points:...

    For OPM 10.4:

    Increase the number of visible items in a drop-down list

    There are two options:

    1. make a regular drop-down list instead of a list of drop-down list box. Regular drop-down lists always display all items, regardless of the length of the list. To do this, set "enable-search-comboboxes = false" in the appearance.properties file. "

    2. increase in the search results max for the combo box in the file appearance.properties, for example 'search max-results = 20' (or another number as appropriate)

    See article OPM the User Guide for more details: http://docs.oracle.com/html/E54499_01/toc.htm#Interviews%20and%20flows/Customize_Web_Determinations.htm#Change4

    I have a vague memory that the increase in the width of the drop-down lists is a bit more tedious. I'll take a look and post here...

    See you soon,.

    Jasmine

  • Display the export value of the drop-down list instead of the element

    I'm showing the value to the export of a drop-down list instead of the selected option or the user selects BLACK, but the value of exports of BLK is actually displayed.  I can find many discussions on how to get the value of the exports and display it or use it to trigger another answer in another area and I can usually tweak my existing JavaScripts when I need something new, but I just can't wrap my head around this!

    This is my last attempt (failed)

    var f = this.getField ("eyes");

    If (event.value is 'Black - BLK')

    f.Value = "BLK".

    I use Acrobat PRO DC.

    Any help is appreciated,

    Thank you

    Xavier


    I've been doing this for a long time and have never heard of anyone who wants something like this, so it is interesting. Remove your current script and try the following script Format customized drop eyes:

    Custom drop-down list Format script

    Event.Value = event.target.getItemAt (event.target.currentValueIndices, true);

    This defines what is displayed in the drop-down list in the value of exports of the selected item. Select the 'Value selected to validate immediately' option to the drop-down list for smoother operation.

  • Returns a value based on the drop-down list

    I am a newbie making the PDF form and had recently started working with a Live cycle to create a form to fill out and succeeded in creating an a model for use with the good example of order (by trial and error) that came with the installation. Can someone help me please this form.  I have a drop-down list on the POINTS column and want to automatically display the unit price of the selected item in the drop-down list. Either way, I managed to make the fluid table.

    menu.JPG

    http://Forms.stefcameron.com/2009/02/25/expandable-table-with-totals/

  • Create a dynamic drop-down list field in Adobe Acrobat Pro XI

    Hi all. I am creating a field in one of my forms using Adobe Acrobat Pro XI. I have a drop down list of 'core' items, and according to what is selected in the list, I want a second drop-down list to give different choices. I've searched and searched and have javascript that I thought might work, but maybe I'm have a mistake or I'm place javascript code in the wrong place, because it does not work. I know very, very little about javascript, any help would be so appreciated.

    I use Adobe Acrobat Pro XI. I added a "new field" and selected "drop-down list. The domain name is ProvType. The options of the menu drop-down are:

    Hospitalized patients

    External consultations

    Doctor

    I have "Commit selected value immediately" selected. The field is not validated. The format is 'none '. There is no measures or calculations associated with it.

    I then created another dropbox and named SubProvType. Under Actions, I selected the trigger as the mouse upwards and then selected the Action "executes a JavaScript script. I selected the Add button and he hit in the JavaScript editor:

    Switch (ProvType.rawValue)

    {

    case "Hospitalisation":

    this.setItems ("Hospice, hospital, Nursing Facility");

    break;

    "outpatient": case

    this.setItems ("adult day Center, Home, others");

    break;

    case 'doctor ':

    this.setItems ("surgeon, general practitioner, neurologist");

    break;

    }

    What I want to do is:

    If "Hospitalization" is selected, I want only the following options to be available in the second drop-down list box "SubProvType":

    Palliative care

    Hospital

    Nursing facility

    If "outpatient" is selected, I want only the following options to be available in the second drop-down list box "SubProvType":

    Adult day Center

    Home

    Other

    If the 'doctor' is selected, I want these options to be available in the second drop-down list box "SubProvType":

    Surgeon

    Family practice

    Neurologist

    However... when I close form editing and try to select a different option in the ProvType field, SubProvType field is left blank and there is no options available. Also, there are no errors.

    I must be missing something, but I have no idea where to start. Thank you in advance for any help anyone can provide.

    Use this code as the ProvType custom validation script (and remove any code that you have associated with SubProvType):

    switch (event.value) {
        case "Inpatient":
            this.getField("SubProvType").setItems(["Hospice,Hospital,Nursing Facility"]);
            break;
        case "Outpatient":
            this.getField("SubProvType").setItems(["Adult Day Center,Home,Other"]);
            break;
        case "Physician":
            this.getField("SubProvType").setItems(["Surgeon,Family Practice,Neurologist"]);
            break;
    }
    
  • Error code 204 trying to download CC on new laptop (2nd computer) it will not download and receive the error code 204. I tried turn off anti-virus and firewall and get the same error code. How do we install CC?

    Error code 204 trying to download CC on new laptop (2nd computer) it will not download and receive the error code 204. I tried turn off anti-virus and firewall and get the same error code. How do we install CC?

    Please ignore. I disabled the anti-malware and the app is trying to install.

    Thank you

  • My computer is stuck in "configuration updates: stage 3 of 3 0% complete.". Do not turn off your computer. It restarts just over and over again with the same message.

    I have a Dell Inspiron 1525 with Windows Vista, and I have tried the following to fix my endless reboot with the "Configuring updates: stage 3 of 3 0% complete.".  Do not turn off your computer. »

    • I inserted the cd 'Réinstallation DVD Windows Vista', but it won't pop up any kind of prompt for me to do something with it.  I tried putting the cd in what was on the computer and tried leaving him in and restart it - but the cd has no EFFECT.
    • I used the F8 key and I tried the following with no luck: safe mode, safe mode with network, safe mode w / command prompt, enable logging, last known good configuration (Advanced) boot and debug mode.  Most of these options make the monitor off (to make you think he will do something), then it just restarts and did the thing reboot loop again and again.
    • I also tried the repair your computer option to the F8 key.  He asks me to log in as an administrator (but my password does not work).  So, I use the menu drop down and choose the name of my computer and then use my password, and I can connect to "restoration of access options '.  Once I'm in the "System Recovery Options".  I tried the following with no luck: Startup Repair tool, restore the system, Windows complete PC Restore, Windows Memory Diagnostic tool and command prompt.  THE only ONE that I HAVE NOT YET TRIED it IS THE "DELL FACTORY IMAGE RESTORE", it's because I want to try to fix it without losing everything on my hard drive.  Here are the details of the I've tried in the "System Recovery Options".
    • The command prompt says: 32 X:\Windows\system > (I have no idea how to use it, but it's what he says)
    • The memory diagnostic tool reboots the computer, but nothing new happening (just reboot over and over again)
    • In the PC restore full Windows: I tried to put the Windows Vista CD in, but it can not find a valid backup location
    • When I click on the system restore: it is said: "no restore points were created on your computer's system disk.  To create a restore open system protection point.  When I click on the system protection, it is said: "your computer is running in a limited diagnostic State.  If you use the system restore in this limited State, you can't undo the restore operation.  Help topics are not available in this State. "  So I press OK, and I'm back to square one.
    • When I click on startup repair: it says "Startup Repair could not detect a problem.
    • I know there are many many posts on this problem, and I think I've tried all the suggestions on how to solve the problem, but they do not work for me.
    • PLEASE HELP ME!  I need my computer for my college work.  I can't borrow laptop my friend forever!

    Hello

    I guess that part of the question could be a driver which is really old or similar should not be loaded.

    This exit Windows updates on (after you have access) and stop the updates of the driver to load.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ---------------------------------------------------

    You can use the solutions in this KB - 3 methods and I listed a little help for them below

    The update is not installed successfully, you receive a message, and the computer restarts when you try to
    install an update in Windows Vista
    http://support.Microsoft.com/kb/949358

    Method 1: Start Windows Vista with the Windows installation media and use the repair feature

    How to do a startup repair in Vista
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    You can also do a safe mode startup repair to access the Recovery Options If you have them available
    or use the DVD as described above.

    This tells you how to access the System Recovery Options
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    Try recovery options Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    Method 2: Start the system in safe mode and then use the system restore feature

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    You can also do a restore of the system of starting with a Vista disk.

    Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

    See article below for that.

    You can use this method on the updates that have this problem.
    http://support.Microsoft.com/kb/949358

    Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
    and install it.

    Microsoft Download Center
    http://www.Microsoft.com/downloads/en/default.aspx

    ------------------------------------------------------

    Once you are in Windows I was running once again reset here as a precaution.

    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058

    Hope this helps sort it out for you.
    Rob - bicycle - Mark Twain said it is good.

  • "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when trying to install Windows on Windows 8 updates

    Former title: windows 8

    Stuck into that and can't GET OUT! Failure of Windows updates. Restoration of the changes. Do not turn off your computer.

    Hello

    Please contact Microsoft Community.

    We understand the inconvenience that you are experiencing.

    1. How long it stays on the same screen?
    2. Windows Update is causing this issue?
    3. Have you tried to interrupt the installation at any time?

    When you try to install Windows updates, you get the following error: configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer. If this occurs, it may take 30 minutes to undo changes, and then the system will display the Windows login screen. Suggest you not to interrupt this until he completely undo these changes.

    Please see the article below and see if this can help you.

    https://support.Microsoft.com/en-us/KB/949358

    Let us know if you need assistance.

  • We have Acrobat 9 Pro running on both PCs, with 7 and 8 operating system. We would like to turn off a computer with 8 because we get it. We want to disable Acrobat, then download on a Mac pro. However, we do not have the

    We have Acrobat 9 Pro running on both PCs, with 7 and 8 operating system. We would like to turn off a computer with 8 because we get it. We want to disable Acrobat, then download on a Mac pro. However, we have not the deactivate option available in the drop down aid. Disabling is visible on another desktop computer. Can you advise us on how to disable it on the old laptop and download on the new laptop Mac?

    You can't do that. If you have a license for Windows, you can not use it on a Mac.

    In addition, Acrobat 9 is obsolete and is not compatible with any current operating system (including Windows 8, which is said by the way).

  • MacBook Pro froze access to iCloud tent and now I can not turn off my computer

    I am writing this note on a computer that has locked me out of cold button Poweroff or reboot. My system preferences requested my password, I entered, press "Sign In" and he currently "try to connect" for about 15 minutes now.  I tried clicking Apple-> restart, ctrl + alt + delete and the power button. My computer does not restart, saying that preferences system interrupted stop down. But I can't quit System preferences. My questions are twofold:

    (1) how to turn off my computer and restart it?

    (2) how do I remove this computer iCloud? Or at least prevent it from connect to iCloud? It never worked and it just bugs the heck out of me.

    To force the closing down, hold the power button until the screen goes black. You may well find that the connection attempt is not reappear on a restart; You should if you want to be able to go to system preferences > iCloud and click on disconnect.

Maybe you are looking for

  • How to get rid of the 'characters' flashing window?

    I was writing an email earlier and I clicked on the menu option "Edit", then the option "Special characters" in the menu dropdown. The pop-up window containing special characters options opened, rather a pop-up of the same size gray started flashing

  • Older Version Dowload

    Well Yes, I know, they do not recommend with older versions. problem is that this stupid unified message window new versions 100% useless. as in, no need to download and install. So where can I get a version prior to this idiocy?

  • Satellite 2410-603 - SD card reader not working not

    My card SD Berlkin broken and I replaced it with a Netgear WG511 v2 which also does not work, now I wonder, is the map which is broken or the card reader? Any ideas would be great, thanks.

  • Re: Satellite C660 - 17K - how to change the text in the language?

    How do I change from Swedish to Norwegian text, tried most of the dashboard without success. All text information displayed in Swedish. I have a new satellite C660 17 K

  • Gambling problem

    It's my system specification:Graphics: ASUS 9600 1 GBRAM: 2.0 GBProcessor: 3 GHz IntelI have 2 question: 1. Vista when I play the game, the game will slowly but in XP I don't have this problem. What is my problem?2. when I plug my USB gamepad, this e