the page is rendered and loaded questions of list item change

Hi all

I have 2 questions, I'll try to put it as clear as possible. The link and log in info on the bottom.

1. in what order is the rendered page fire? In other words, I have a report to Page 2 (Payroll Summary) and in this report, I select and where clause. The where the info from the article comes from a list item. When you view the report it shows nothing, so I guess that because the element is not filled in and yet, this is why the report does not. Not sure... so if someone can clarify that for me, it would be great.

2. when I change a list item (eg. Payroll between 2010 and 2009 year), how can I refresh the payoll report that uses the year of payroll as a parameter? is it possible to launch the summary report on the Payroll when the year changes? If so, how?

My apex page is

http://Apex.Oracle.com/pls/Apex/f?p=31754:2:678019909905630:no:

It is application of dashboard.

Workspace Laba
Username [email protected]
Password edumet

Once the connection to the application info is

E-mail [email protected]
password Laba

Thank you
Laba

Emeric,

When the page is sent after the selection value is changed, the prior to execution of the header calculations. I added a condition on the calculation, so that it only works when the value of the element is set to zero.

Thank you
Machaan

Tags: Database

Similar Questions

  • Search bar on the Macbook Air doesn't work, will allow me to load the pages of Favorites and links to these pages, but not let me google from the bar or manually enter Web sites, however, it works perfectly on the guest user

    Search bar on the Macbook Air doesn't work, will allow me to load the pages of Favorites and links to these pages, but not let me google from the bar or manually enter Web sites, however, it works perfectly fine on the guest user. Have you tried restarting and it still does not work.

    The problem should be solved now.

    Otherwise:

    OS X

    iOS

    Workaround for problems with the Safari address bar

    http://osxdaily.com/2016/01/05/fix-Safari-freezing-address-bar-use/

  • Hide/show items based on another point when the page is rendered.

    Hello

    I am trying to hide or display the elements on the page when the page is rendered according to the value of a checkbox control.

    That's what I use.

    Body HTML attribute:

    OnLoad = "initialCheck (); »


    Header HTML:
    function initialCheck () {
       if (html_GetElement('P21_BEN_SAVINGS').value != 'YES') {
          html_HideItemRow('P21_COST_SAVING');
          html_HideItemRow('P21_LOCATION_CODE');
          html_HideItemRow('P21_ACCOUNT_NO');
          html_HideItemRow('P21_SVG_DEPT');
          html_HideItemRow('P21_RATIONALE');
       } else {
          html_ShowItemRow('P21_COST_SAVING'); 
          html_ShowItemRow('P21_LOCATION_CODE');
          html_ShowItemRow('P21_ACCOUNT_NO');
          html_ShowItemRow('P21_SVG_DEPT');
          html_ShowItemRow('P21_RATIONALE');
       }
    }
    I want the items listed to show when the page is loaded when the P21_BEN_SAVINGS is checked (equal to 'YES'), but they are hidden in this situation.

    I see not the onload call in Firebug, and I don't know if it is the configuration of firebug or that JavaScript is not fair.

    Thanks for any help!

    Matt

    Hi Matt

    Try this

    function initialCheck () {
       if ($v('P21_BEN_SAVINGS') != 'YES') {
          $x_HideItemRow('P21_COST_SAVING');
          $x_HideItemRow('P21_LOCATION_CODE');
          $x_HideItemRow('P21_ACCOUNT_NO');
          $x_HideItemRow('P21_SVG_DEPT');
          $x_HideItemRow('P21_RATIONALE');
       } else {
          $x_ShowItemRow('P21_COST_SAVING');
          $x_ShowItemRow('P21_LOCATION_CODE');
          $x_ShowItemRow('P21_ACCOUNT_NO');
          $x_ShowItemRow('P21_SVG_DEPT');
          $x_ShowItemRow('P21_RATIONALE');
       }
    }
    

    Max

    Published by: - Max - April 28, 2010 10:42

    Published by: - Max - April 28, 2010 10:43

  • When I run mozilla or open a link in a new window but I get the page you want to load an additional page of the new tab opens with it, the difficulty?

    When I launch mozilla or open a link in a new window I get the page you want to load but an additional page of the new tab opens with her. I tried to change my homepage to different things (new tab, firefox home, see the blank page) but I always get a new additional tab to open. How can I get only one page to open it?

    Hello

    The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.

    Note: This will make you lose all the Extensions and preferences.

    • Sites Web open is not recorded in less than 25 versions of Firefox.

    To reset Firefox, perform the following steps:

    For Firefox versions prior to 29,0:

    1. Go to Firefox > help > troubleshooting information.
    2. Click on the "Reset Firefox" line

      button.

    3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
    4. Firefox opens with all the default settings applied.

    For Firefox 29,0 and above:

    1. Click the menu button

      click Help

      and select troubleshooting information.

    Now, should open a new tab containing your troubleshooting information.

    1. At the top right of the page, you should see a button that says "Reset Firefox"

      . Click on it.

    2. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
    3. Firefox opens with all the default settings applied.

    Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

    This solve your problems? Please report to us!

    Thank you.

  • Screen of the blackBerry Smartphone will not portrait in landscape mode when, in the pages of sms and message mode change

    I don't know if I've accidentally changed something, but all of a sudden I can not get the screen to switch from portrait to landscape mode when im in the pages of sms and message. I searched everywhere for an option that could keep me out of this point of view, but I have not found anything. Anyone know how to fix this? your help will be greatly appreciated.

    Make sure that you use the latest version of the OS that you can find (from any carrier.)

    You can probably get it to work again by removing the battery and reinsert.

  • Hi, how do I change the orientation of the page with headers and footers for facing pages

    Hello

    How to change the orientation of the page with headers and footers for facing pages in CS5

    Turning the page is only for the formatting of data - the page is not literally transformed for printing.

    In most print even if the pages of a book are enabled for the landscape, the header and the footer are still in the same position.

    If you need pages in landscape mode with headers and footers in a different location - you need to do these pages in the section "Master Pages" of the Pages panel

    Then apply these new Master Pages to the pages in your document.

    http://helpx.Adobe.com/InDesign/using/master-pages.html

    Note - it is not usual to have a different orientation for the headers and footers.

  • Pages of dashboard as a drop-down list items

    Hello

    I have more than 6 pages in my dashboard, I want to display as a drop-down list. Before posting here, I looked at all possible sources and link to joe
    Dashboard OBIEE - Pages of dashboard as a drop-down list items

    But after going through this post I force pass through. Can someone guide me or someone that can give me the right solution.

    Any help would be greatly appreciated.

    TIA,
    KK

    Sure no problem,

    concerning

    John
    http://www.obiee101.blogspot.com/

  • When I am on some site, articles, for example, and I get to the bottom of the page, why it automatically load the next page below? It keeps doing this and its very frustrating. Can I disable this option somewhere?

    I'm on a blog and the blog has a music player on it. When I scroll to the bottom of the page, its says in a small pop up box "loading page", then load it page after page... then I have 4 pages loaded and all playing different music at the same time! How can I disable this feature? Very frustrating!

    Thank you!

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • I lost 'file', 'delete', etc. from the top of the page b/4, I loaded open foxfire. I want them back

    past Yahoo in foxfire and lost the bar at the top of the page with the file, delete, etc I would get back to the top of the foxfire browser. How to do this?

    This has happened

    Each time Firefox opened

    is after that I loaded foxfire

    Press the Alt key to display the Menu bar, then open view > toolbars and select menu bar, so it has a check mark.

  • The upgrade of RAM and warranty questions

    Hi all

    So, I have a dv6-7031tx, which has 4 GB of Ram. Now I want to remove the 4 GB of Ram on my laptop and replace it with 2 sticks of Ram of 4 GB, will be canceled warranty if I do this? The RAM brand im going for is G.Skill, Patriot or Kingston.

    Edited: I talked to HP support last week and apprently they recommend not third party as G.Skill RAM, they recommend only Mircon. I know not even how good are the Micron reputation and they are not well known.

    Thank you.

    Hello:

    You will not void the warranty by installing the memory of any provider.

    The only way you will cancel the guarantee is if damage you the memory slot, plastic cover, physically or does not follow the procedures in the service manual to install memory (like removing the battery and the power of a/c before working inside your laptop.

    I used the Patriot, G.Skill, Kingston, Crucial, Mushkin in HP laptop computers and desktop PC with a lot of success.

    I can also tell you that HP uses no chips Micron exclusively in their PC.

    Question... Why do you want to delete a module of memory 4 GB perfect condition except if they put a PC3-1333 chip here and you want to install 2 PC3-12800 (1600 MHz) memory?

    Another question?  If this is the case, why go to halfway?

    I just max the thing out to its capacity of 16 GB and buy 2 x 8 GB PC3-1600 (PC3-12800), memory modules.

    The page of the form is incorrect about the maximum of 8 GB.

    Please consult the owner's manual at the link below, Chapter 1, page 4.

    http://h10032.www1.HP.com/CTG/manual/c03216834.PDF

    Paul

  • The order of failover and load balancing

    Hello

    I have the following scenario. An ESXi with 4 Gbps vmnic. The questions are:

    (1) if I have a group of ports configured for 'Route based on the original virtual Port code' in the policy of balancing load, and for the same port group I the option button 'Override switch failover command"checked, where I set up 3 of the active adapters vmnic, as well as the other vmic remaining as unused adapter, the ESXi uses the policy that I have configured (in this case 'Route based on the original port code') between the three vmnic load balancing marked as active? Or he uses them in the order that they appear in the section active cards?

    (2) Suppossed, I configured the four physical switch ports in an etherchannel group to use 'Route based on the IP hash' load balancing policy. In this situation, then I configured for a certain group of port to only used two active adapters and two others as unused? In this case, ESXi should balance the load using the method hash IP but only in two active adapters? Or it is a misconfigiuration and I should not configure my nic teaming in this way?

    (3) the official setup guide says "NOTICE on IP requires the physical switch be configured with etherchannel. For all other options, etherchannel must be disabled. ». How can I I configured my virtual network, if I have a few groups of political ports based on the hash of the IP to use load balancing and another uses 'Route based on the original port code. This is the case when I for example have two management ports using the same vSwitch with four vmnic (where they are configured as an Etherchannel in the physical switch). I would port one or several groups for virtual machines that use the IP of the hash method of balancing the load and vmkernel ports por management uses only a single adapter active with no back and as "based on the source port ID" load balancing as best practices said.

    Now, the four vmnic is the same for all traffic. The physical switch ports must be configured in an etherchannel group because certain groups of ports will use the method of IP hash, but others are not. The configuration guide I said SHOULD NOT use etherchannel if I won't use the hash IP method, but I'LL use it, but only in groups of one or more ports.

    Maybe I do not share the same vmnic from this situation.

    Finally, it's a philosophical question. What is the difference between 'The route based on the source port ID' and the 'road based on the source MAC Hash' load balancing policy? What is the purpose of the second? It is assumed that if I had two different MAC address in a virtual machine, it would be because I had two different virtual cards inside the virtual machine, which would be connected to two different port ID in the vSwitch, I can use the first strategy (based on the original port code). In other words, which would be the case where I had the traffic entering the same vSwitch but port ID with different source MAC address, so I should chose the method to distinguish the Source MAC address load balancing traffic?

    Thank you.

    Guido.

    (1) as long as you override vmnic only and don't change the policy for this group of ports, he uses the policy configured at level vSwitch and use the selected interface 3 with this policy

    (2) it should work, I don't think it's a problem for the switch receive packets on a subset of the aggregation. I do not think that Etherchannel is supported (IIRC, it is a Cisco proprietary protocol, VMware only supports LACP passive, which corresponds to the Port channel world Cisco.) Trouble me if I'm wrong!)

    (3) I think that's all right, as I have explained in 2), there is no special negotiations with the consolidation of VMware, the important thing only I know is to configure the port on the side of the switch channel if you decide to use the IP hash (that will lead to important questions)

    4) (self labeled) I think it may differ in some cases individuals, as when the operating system use the same MAC address for both NICs (aggregation in-vm) or if you advertise several MAC address for the same network card (ESX in a VM for example would make for its VM). Such cases differently affect this setting.

    That is the right question, and I'm curious to know if someone wants to develop on it!

  • Run the java code before the page is rendered

    Hello

    In a workflow, can I run the code java before the page/view is rendered (i.e. some preprocessing). I need to be able to have access to the links on the page.

    Thank you!

    Yes, you can.
    Right-click on the activity of your method call, choose create the definition of the page and you can add the links you need.

  • How can I force "toolbars" on the pages scroll up and away when I scroll the page?

    Many pages have one or more toolbars or widgets that are still locked into place at the top of the web page when you scroll from top to bottom. How can I disable their ability to do so? It is so annoying when shit like that takes 1/3 of your screen and leaves so much less space available for what you're trying to read. The attached picture is for a particularly annoying page that is typical of how mentally disabled web developers at ESPN wasting your screen space: sports.espn.go.com/nfl/standings has * THREE * of those annoying widgets: one disappears when you scroll down to the low enough, but you're stuck with the other two down any distance you highlight.

    Many web pages make the problem worse by putting also contained locked into place at the bottom of the page, reducing more usable display area - shit like that should not be visible until you scroll at the bottom of the web page.

    You can optionally use the extension Stylish add some site specific rules to hide these items, but who's going to hide them completely.

    @-moz-document domain(sports.espn.go.com){
     #global-scoreboard { display:none!important; }
     #global-header { display:none!important; }
    }
    
  • can I do my hompage of firefox and customize the page with themes and content such as yahoo

    I want to be able to have the firefox home page and have the themes and content of the page throughout not only the portion of the toolbar. on yahoo, I can do this, but I'm tired of them and switch to firefox for my homepage, if I can change the entire page.

    The integrated Firefox homepage isn't like My Yahoo widgets. You may be able to find a good add-on for this, or you might want to consider other sites that popped up when Google deleted the iGoogle homepage.

    A few links to help in your search:

  • How to paste some data from numbers to some placeholders in the Pages using AppleScript and Automator?

    Hello AppleScript and Automator Pros!

    Unique ID Elements Quantity Unit of measure Sum, $ Color Dark?
    1 Pencil 1 Agenda 90.50 P Yes
    2 Pen 150 Agenda 300.23 THERE NO.
    3 Pillow 2 Agenda 400.01 B NO.
    4 Toy 114 Agenda 500.30 R Yes
    5 Repair service N/A N/A 1.00 N/A NO.
    6 Phone 98 Agenda 1986.10 W NO.

    P = purple

    Y = yellow

    B = black

    R = red

    W = white

    It was an example of Document numbers


    Now the example of Document Pages

    [PH for Unique ID] - Ben got: [PH for element], [PH for quantity] [PH for unit of measure], [dark or not PH] [PH for color] for [PH for sum before the comma] $ [PH cents] c.

    When Ben had [PH for quantity] [dark or not PH] [PH for Color] [PH for item tiny first character and changeable if necessary end], he became happy

    Example 1: Allows you to take data from line with Unique ID 1 and that's what it takes to go:

    1 - Ben got: pencil, 1 point, violet dark 50 ° c for $ 90.

    When Ben had 1 Purple Pencil dark, he became happy

    Example 2: Now data row with Unique ID 3 and it is what to get:

    3 - Ben got: Pillow, 2 pieces, blue for $ 400 01b

    When Ben had 2 blue pillows he became happy

    Example 3: Now the data used to row with Unique ID 5 and this is what it takes to get:

    5 - Ben got: repair service, 1 service, for 1$ 00 c complete

    When Ben had 1 repair service complete, he became happy

    Here, I have to change given n/d of the table in numbers and replace quantity with 1 PH, PH for unit of measure with service (no point as in the previous examples) and the PH for color with plenty of example.

Maybe you are looking for

  • Recording on Satellite Pro P200

    How can I connect an audio mixing table, record of my Satellite Pro P200? I have Cakewalk Sonar.Thank you!

  • Drivers Windows 7 for the Qosmio G40-12 s

    I have a Qosmio G40 - 12 s with windows Vista 32-bit Edition fullAnd I install a Windows7 Ultimate 32 bit instead of vista, before I had to download all the drivers in this link (http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios

  • remove the my code bios administrator password is 64605597

    I have a HP Pavilion g6 with a game password. As soon as you start looking for a password. I've seen other posts where you have provided a code to bypass the password. My system code is 64605597. Can anyone help with my system?

  • What is this on my PCI DAQ connector? (PCI 6259, M-Series)

    I'm building a new rig which includes a PCI-6259, am confused by this connector: What this is, and which mates with it? This is the place where I expect the power connector PCI-E to the power of the system, or the 'hard drive connector"that the M ser

  • Windows 7 xp pro

    Same computer Runung for 6 years. When you try to run some videos saying my windows is not valadated. Ask key? Help, thanks Bob