The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

I am at a loss.  I've set up a root certification authority to sign all servers in my workspace of Horizon, SAML is in the Green and after a lot of reading when troubleshooting also synchronized on all my ESXi hosts and guests.

Basically, what I did is the following:

Set up the connection to the Server VMware View Horizon 5.2 - created different pools and can connect via the customer different platform. (a few times to eliminate any possible configuration errors along the way)

Configuration of VMware View Horizon Workspace 1.0 (a few times now) with self-signed and CA signed certs.  My workspace appears fine, the synchronization of files, apps work, and view pools appear.  When I try to launch your desktop from inside the Horizon workspace I get this error:

The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

Now I think that I followed it down to something to do with SAML connection - which, to my understanding, archery chips between workspace and view.  On the login server, I see it in the Windows event log:

BROKER_USER_AUTHFAILED_SAML_ACCESS_REQUIRED

SAML access required but not tempted by customer

Attributes:

Source = com. VMware.VDI.Broker.filters.SamlAuthFilter

Time = MON may 20 16:06:41 MDT 2013

Gravity = AUDIT_FAIL

Node = ViewConnection.access360.ca

Module = broker

Recognized = true

Something is not crossing to allow me to access my office view since the workspace of Horizon.  If I remove the requirement of SAML on the login server see, when I try to connect to a desktop computer from the view connection server I get a promotion for and can I get my IDs & field and have full access with reviews, as well as blast HTML - just cannot get there with Horizon Workspace.  There must be something that I am missing with SAML...

As I said, I'm at a loss here on what does not work between the Horizon workspace and the connection of SAML for display to connect to the server.  There is no server security, server transfer, and firewalls is all off, so I don't think it's a network problem.  Simple as possible.  The Windows Journal event displays the login displays server error is: access required but not attempted by client SAML.  I have all my servers synchronized after a few seconds - so I don't think that documented the TIME Horizon workspace synchronization time sensitivity is responsible here.  I am Pack overnight, but will do exactly the same thing with a client of tomorrow - hopefully without the same result!

Any ideas?

A

So I re-deployed the VAPP (again!) very attentive as I went.  As usual, the initial database installation failed because I entered my domain FULL of the gateway name, so it does not match.  After useful messages already there for this (Workspace install fails with error creating the user admin) I used the wizardssl.hzn of connfigurator - going to recreate a rootca to the environment based on my FULL domain instead of the bridge - going and then let it grow all for the other vApps.  I then connected to each and pulled down my private rootca and ran c_rehash, etc. (another useful message!- adding MS signed Certs to Horizon Workspace & laquo;) Carlos & #039; Corner) I actually use my background to UNIX and openssl to be my own private CA and sign all of my certificates.  I created the SAN cert and added to the SSL configuration on the Configurator - going and connector - going.  Oddly enough, both of these server do not appear to be accepting SAN cert that includes their ENTIRE domain, but that's for another day... My Horizon Workspace FQDN does show as being approved by installed RootCA private (which does not have other DNS names for the service - going, the Configurator - goes, the data - will and the connector - will, but as I have already said--a battle for another day) so it's a good thing.  I joined my workspace to my domain name - well!  Activated would be pools seen in the Configurator - goes - sync - good.  CRT for the my display login server has accepted and implemented the SAML trust.  Still good.  Sync in my opinion users group who already had a couple of linked clone pools allowed to do.  Good.  Connected to the FQDN of my workspace and clicked on computers - seen my 3 pools.  Clicked on one and after a few seconds, launched in a new window of the explosion.  Success!  I disconnected and connected on a different machine, and something that I saw before, but doesn't have a lot of attention to was the connector - will put 'use windows authentication', I couldn't understand why every time I sailed on my Horizon workspace a no vmware window opens asking access my FQDN:443 with a user and pass.  It is this setting - duh.  I'm not sure yet that gives me, so it's off for now.

Thanks for all the input: it's good to know that there are others with some of the same questions.  It's still v1.0, it is related to some of these pitfalls.  It is capricious with derived from same time less than 10 seconds seems to have a negative impact.  Had to ensure my ESXi servers were strong (never worried a lot in the past with MS AD being quite tolerant with small derivatives) I tired my vApps affecting a NTP, but they seemed like being left to the default of synchronization to the ESXi host.  See how than pans.  CERT is somewhat capricious depending on your deployment.  Of course the connector - will and the Configurator - must be signed by a CA that they are internal, but always be nice to then have signed internal...

Now, I'm on ThinApps for desktops as well as the web interface integration.

I bumped my head against the wall with my first configuration of Citrix XA and XD (before having VDI in a box!) and it was the best way to learn.

I don't know that I grave along that I finished my PoC, but I'm very happy with today's results.  I still plan on the comparison of my logs successful with the logs I have pulled my former deployment TIME and see what it was that it was broken.  I think it was that wanted me a PTR record to my domain FULL DNS MS. name  I think I just had the direct search for the original bridge - will and FULL, but only a setback for the gateway domain - name.  Would explain why I was never able to connect to the gateway to access your desktop.  Oops.

A

Tags: VMware

Similar Questions

  • Can't get updates for Windows, "Windows Update cannot currently check for updates, because the service is not running." You may need. "" Restart your computer.

    When I try to install the updates I receive the message "Windows Update cannot currently check for updates, because the service is not running."  You may need. "" Restart your computer,   It does not also. check me the update history

    Hello

    1. you made any hardware or software changes the computer recently?

    2. What is the number of update?

    3. do you get this message for all the updates?

    Follow these methods and check if that helps:

    Method 1:

    Step 1.

    Unplug all external devices, restart the computer, and then try to install updates.

    Step 2:

    I suggest that you follow the steps mentioned and try to start the Windows update service.

    Check if the following services are running.

    (a) Background Intelligent Transfer Service

    (b) cryptographic Service

    (c) Windows Update

    (d) Windows Installer

    a. Click Start, type "services.msc" (without the quotes) and press ENTER.

    b. double-click the service name in the Services list.

    c. under the general tab, next to startup type, make sure that automatic is selected.

    d. If the service is not already running, under Service status, click Start and then click OK.

    e. once the services are started and defined as running, try to install the updates and check.

    Method 2.

    You can follow the steps in this article: http://support.microsoft.com/kb/2509997

    Warning check disk.

    Important: All by performing the check disk on the hard drive if bad sectors are found then check disk try to repair this area, all available data on this sector can be lost.

    Registry warning

    To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756/)

    How to back up and restore the registry in Windows

    See also: the problems with installing updates

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  • Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer

    My computer stops the update via WIndows Update Component

    Whenever a try to do the manual update using this component I get the message;   * Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer *...

    My computer has a few updates, but can not run these update

    Whenever I try to run computer shotdown/updates remain frozen for a while and stops without updating

    He starts to run updates 1 of 13... and stops

    If I shutdown normal e, computer stay likehanging 1 hour without stopping.

    I would like to know how to solve this problem

    Thank you

    Concerning

    Gladmar.

    Hello

    Were there any changes made on the computer before the show?

    Perform the following methods and check:

    Method 1:

    I suggest you to check if you are able to access Windows Update service and ensure that the following services are started. If it is not started, follow these steps:

    a. click Start, type services.msc and press enter.
    b. search Windows Update.
    c. right-click on the service and select Properties.
    d. in type of startup, select enable.
    e. click Start under the Service status.
    f. click OK.
    g. Repeat steps c to f for the following services:

    Background Intelligent Transfer Service
    Cryptographic services

    If the steps do not help to solve the problem, you can go ahead with the methods mentioned below and check.

    Method 2:

    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058

    Method 3:

    Your anti-virus software is in conflict with Windows updates. You can test this by temporarily disabling your antivirus:

    Disable the antivirus software
    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 4:

    The problem with Microsoft Windows Update is not working

    http://support.Microsoft.com/mats/windows_update/

    See also:

    Troubleshoot problems with installing updates
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

    Updates: frequently asked questions


    http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions

    I hope this helps.

  • Error message "WIndows cannot currently check the updates, because the service is not running, you may need to restart your computer.

    Error message "WIndows cannot currently check the updates, because the service is not running, you may need to restart your computer.

    I am currently using windows 32 bit vist

    I rebooted, I changed the settings, I don't have a file called window update service in the service section to stop and start, I tried the fix programs, I'm out of ideas and I need help!

    Suggestions?

    Hello

    1. have you made changes on the computer before this problem?

    2. which antivirus app do you use?

    I suggest you try these methods and check.

    Method 1:

    Anti-virus software may conflict with Windows Update. You can temporary disable them and check the issue.

    Disable the antivirus software
    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2:
    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058
    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:
    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

    Method 3: If the methods above do not help, I suggest you delete the edb.log file and check if that helps.

    Follow these steps:

    a. click the Start button, click computer.

    b. now, go to this site: C:\windows\softwaredistribution\datastore\logs\edb.log
    Where 'C' is the drive of operating system
    c. delete the log file, and then restart the computer and check the issue.

  • Impossible to uninstall a program; error message: sorry you do not have the right permissions tocomplete this action. Please contact your administrator on this computer to continue

    I downloaded a program on the internet, but now when im trying to uninstall it is showing this error message: cannot uninstall a program. error message: sorry you do not have the right permissions tocomplete this action. Please contact your administrator on this computer to continue. What should I do please help.

    Hello

    you tell us the name of the program

    go to the website of manufacturers of programs and to find a way to uninstall

    or try this free program for her

    http://www.revouninstaller.com/

    and it is a program 'downloaded a program from the internet' search for malware

    Download update and scan with the free version of malwarebytes anti-malware

    http://www.Malwarebytes.org/MBAM.php

    You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

    http://www.bleepingcomputer.com/download/anti-virus/rkill

    If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode with networking with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.
  • Windows media player-Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings.

    I bougth Windows 7 starter, after the installation, I am unable to read the CD/DVD with media player. These messages continue to flow whenever I have CD/DVD slot...

    "Windows Media Player cannot play DVD video. You may need to adjust your Windows display settings. Open display in Control Panel settings, then trylower your screen resolution and color quality settings"I've adjusted manually, no solution, I had use microsolt auto FIX no way." Please help.

    Windows 7 Starter Edition or Basic... does not include a DVD decoder.

    As you can see in the following article... MS recommends
    upgrade to Windows 7 Home Premium, Ultimate or business.
    More features for you... more money for them...

    Info about DVD decoders: Plug-ins for Windows Media Player
    http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

    It is possible that one of the following freeware
    media players would play your DVD:

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    VLC Media Player
    http://www.videolan.org/

    GOM Media Player
    http://download.CNET.com/GOM-media-player/3000-13632_4-10551786.HTML?tag=mncol;2

    Good luck...

  • Error when you try to play a DVD: Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.

    Windows Media Player help

    I bought a netbook and have an external CD drive to dvd. When I want to play the video, I get this error.  I can't find a solution.  Any Advisor.  Error is... Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.

    Hi Rains27,
     
    1. were you able to play the same DVD sooner?
    2. must arrive with a particular DVD or all of them?
    3. do you have a DVD decoder installed on your computer?
    4. you use starter edition of windows 7?
    5. What is the resolution on your computer?
    6. have you installed a codec on your computer?
    If you have installed a codec on your computer the I suggest you to uninstall the codec.
     
    Method 1:
    Try running Windows Media Player DVD Troubleshooter utility and check if this may help:
     
    Open the troubleshooting Windows Media Player DVD Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click
     
    Troubleshooting, click View all, and then click Windows Media Player DVD.
    http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-DVD-Troubleshooter
     
    Method 2:


    Method 3:

    Try to reduce the hardware acceleration again and check if it makes a difference.
     
    a. open the screen resolution by clicking the Start button, Control Panel, and then, under appearance and personalization, click on adjust the screen resolution.
    b. click on advanced settings, troubleshoot tab and then click on change settings.
    c. move the hardware acceleration slider toward none to reduce or turn off video hardware acceleration.
    d. click OK and then click Restart now.

    For more information, see this link: thanks and regards:
    I. Suuresh Kumar - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.

    I got some video footage of various camcorders dating back to 1989 converted to DVD so I could create a newsletter. I couldn't have windows media player to run. Any help out there?

    I got some video footage of various camcorders dating back to 1989 converted to DVD so I could create a newsletter. I couldn't have windows media player to run. Any help out there?

    =================================
    Have you had success playing other video DVDs?

    Maybe you need a DVD decoder?

    (FWIW... it is always preferable, if you create a system restore
    point before installing any software or updates)

    Info about DVD decoders:
    Plug-ins for Windows Media Player
    http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx

    Also, you could try the free VLC Media Player:

    VLC Media Player
    http://www.videolan.org/

    And it may be interesting to try to download and install
    one of the following codec packs:

    * Proceed at your own risk *.

    Info about CCCP
    http://www.CCCP-project.NET/wiki/index.php?title=Main_Page

    K - Lite Codec Pack (full)
    http://www.filehippo.com/download_klite_codec_pack/

    Good luck...
    John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • You might not have permission to use this network resource. Contact your administrator of this server to find out if you have access permissions. (Vista)

    I get this message from a computer on which I'm putting the print share and I put on for the sharing file and printer sharing on both computers, but he repeats to me by saying that even please help message.

    Hello

    ·         Logged in as an administrator on the computer?

    ·         Your computer is on a domain or a workgroup?

    ·         You will remember to do recent changes on the computer before this problem?

    Response with above information to better help you.

    If your computer is on a domain network, you can contact the system administrator for assistance.

  • "The Windows Update cannot currently Check For Updates, because the Service is not running. You may have to restart your computer.

    Unlike before, I can't launch the Windows automatic update service now, I suspect that my computer is infected virus, I just install demo version free of McAfee internet security and run a full scan, no infection has been detected.

    Description:

    When I click on Windows update for all programs at startup, pop out window update, and then I click on "check update", out another part: list "" Windows Update cannot currently Check For Updates, because the Service is not running. "You may need to restart your calculater ', then I restart the computer a few times, the same problem still persists. before I was using microsoft essential secruty with no problems, but now I can't seem to complete the definition of update, so I think this problem could be related to Windows Update and decide to uninstall MSE and replace it with McAfee, but it does not work.

    any help and suggestions would be very appreciated.

    Hello

    Steps 2 to 6 to identify the program that is causing the problem if the clean boot solves the problem.

    Try the procedure described in the following article to improve your computer's performance.

    Optimize Windows 7 for better performance.

    http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

    Ways to improve your computer's performance.

    http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-your-computers-performance

  • Often when I return to my home page, I get this message: unable to display the page of the page you are looking for is currently unavailable.

    The only time where I get this message "cannot display the page of the page you are looking for is currently unavailable ', is when I come back to my Yahoo home page after visiting other websites and click"home. " My SSL settings are correct; I tried to clear my cache, log out and go back online, repaired broken clusters, etc. I'm out of ideas.

    The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
    Note: This will make you lose all the Extensions, open Web sites and preferences.

    To reset Firefox, perform the following steps:

    1. Go to Firefox > help > troubleshooting information.
    2. Click on the button 'Reset Firefox'.
    3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
    4. Firefox opens with all the default settings applied.

    Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

    This solve your problems? Please report to us!

  • You have reached the maximum of pages in this set of results of content. If you are looking for something specific, try applying a filter of content type or enter a search term.

    I get error frequently below.  In General, when you navigate on old posts on the forum SQL and PL/SQL, after reading a post, I click on the left arrow in my Firefox browser, which I expect to take me to the page of the posts that I had.  Instead, I get a page with no messages.  I then click on a forum page numbers in the upper right corner.  Sometimes brings back me to the page that displays the list of the posts that I had.  However, more often I get the below error.  So try to navigate from one position to another is desperately slow.  You can fix this?  Everybody brings a work around to be able to get from one station to another, or at least back to old messages without the error page?  This is a problem that happened before and after the upgrade.

    "You have reached the maximum of pages in this set of results of content. If you are looking for something specific, try applying a filter of content type or enter a search term. »

    Have you tried right-click (ctrl-click on Mac) and choose 'Open link in a new tab' instead? With all the dynamic html today browser back and before options are often dead still. If you open links in a new tab or window, you can simply close the window instead of using the back button. It may take awhile to get used to it, but there are some benefits, such as the loading of the pages in the background, and you do not lose the focus of the page where you. You can disable "when I open a link in a new tab, swtich it immediately." If I understand your problem, maybe it works better.

  • You are looking for a way to set permissions of files on a folder so that users can view and copy the files out, but may not change the original file in the folder.

    You are looking for a way to set permissions of files on a folder so that users can view and copy the files out, but may not change the original file in the folder.  They will have to copy the files in the folder to make changes and then copy a review of back in.  Locally and on the network

    Hello

    1. In Windows Explorer, right-click the file or folder you want to work with.
    2. In the context menu, select properties and then in the Properties dialog box, click the Security tab.

    3. In the name list box, select the user, contact, computer, or group to which you want to display permissions. If the permissions are grayed out, this means that the permissions are inherited from a parent object.

    https://msdn.Microsoft.com/en-us/library/bb727008.aspx?f=255&MSPPError=-2147217396

  • You are looking for a search button to the site of Muse. MuseThemes does not work

    You are looking for a search button to the site of Muse. MuseThemes is not an option, because it requires $70, a one year subscription. I do not code. Muse is working on a search widget?

    Please check the available options:

    http://musewidgets.com/collections/all/search

    Thank you

    Sanjit

  • Any way I can remove the ball that says: you are looking for a printer, no printer not found on startup?

    I ran an 'r' on my new motherboard used, running the same HARD drive and now I guess he thinks that there is a printer somewhere and so... whenever I start the computer I get the pop up bubble looking for material, said OS os BIOS "find printer" and then "no printer not found" I mean it's just a hassle evry time having these "threaten to performance" If you want topics with my XP Pro SP3, basically I just use IE and working relationships. Any suggestion is appreciated.

    Hello

    -Have you ever had a printer installed?
    -You see something unusual in the Device Manager?

    Follow these steps and check if the problem persists.

    Step 1:

    Test the issue in a clean boot State.

    Note: The steps in the article to restart your computer as usual.

    Step 2:

    Uninstall and reinstall the USB controllers.

    http://support.Microsoft.com/kb/310575

Maybe you are looking for

  • How to tell - allow a site using Flash Player, when I accidentally approved it?

    I hosted a site run Adobe Flash Player and then I clicked on do not forget instead of this time exclusively. How can I remove the site from Firefox remembering site. There must be a list somewhere in Firefox where I can remove the Web site. Thank you

  • Device Manager does not display satellite M305 - webcam

    I would frequently turn on/off the camera in Device Manager. However, now I can't find. Any where. I go to the Device Manager and there is no icon of imaging devices, it's like he disappeared. I don't know what to do. :( I tried showing Hidden icons,

  • The Bios Reprogramming?

    Hi, new to this forum. I have a laptop HP HDX18-1010ea. When starting, it gives a message "serial number not found. Loads of calculation as normal upward and I am able to do everything outside of the connection to the internet. I did a factory reset

  • HP Deskjet installation disk missing

    I have lost my disc to install for HP Deskjet F4180. What can I do?

  • There

    I live in Wellington, NZ and am eager to try the XPS 13 Ultrabook before you consider buying. Anyone able to help?