the parameter mapping constant to a control block Veristand simulink block

Hello

I'm trying take a simple model of an RL circuit in simulink (build a DLL) and control of the constant blocks in Veristand to dynamically change the value of R and L constant through Veristand Slider indicator or digital. I can see the output of the model run, based on the initial values that I have loaded, but I'm not able to mapping of these parameters to any digital control.

Any thoughts on how to do this!

Hey, Trever,.

You must use a command of calibration model to interact with parameters, and not a digital control.

Take care!

Tags: NI Products

Similar Questions

  • How to copy the parameter FDM (import format, mapping of dimension, the command table)

    Dear all,
    How to copy the parameter FDM (import format, mapping of dimension, table of control) of application to another application.
    I found that one dimension mapping can be imported. Is it possible to copy the FDM application quickly?

    Thank you for your help

    If you get a chance try the following script, it is so simple and easy to extract all the map as XML data and help to import via import script.

    ---------------
    Void MapExtractor()
    '------------------------------------------------------------------
    "Script custom upstream Internet link:
    '
    "Created by: SatyaK"
    "Creation date: 08/12/09.
    '
    ' Object: this Script will produce a file of account mapping for
    "the current location.
    '
    '------------------------------------------------------------------

    'Run the export '.
    strFilePath = API. IntBlockMgr.InterfaceMgr.fExportMapToXML ("File Path", PPOVPeriod)

    End Sub

    -------------

  • I received spam messages supposed to come from Paypal. I closed the account and block the associated map in case. However, I was recommended by Paypal to check my iphone and Ipad if no virus of these emails infected by the devices. How? Thank you

    anti-spam messages expected to come from Paypal. I closed the account and block the associated map in case. However, I was recommended by Paypal to check my iphone and Ipad if no virus of these emails infected by the devices. How? Thank you

    Unless you have jailbroken your iOS devices, there are no viruses that can infect them. Sounds like PayPal tries to return the ball.

  • The storage control blocks were destroyed

    Tonight I was check my Microsoft color management system and made a demonstration of calibration results. I run a laptop.

    I do this in preparation to rework some of my photographic images in preparation for printing from a site selling products online of art which I am a member. ICC color profiles and so on was my reading today on the internet - Phew!

    In any case, I made a mistake. I had downloaded a profile soft proofing (zip file, I scanned with my anti-virus and that's okay). However, I had not checked out files.

    While I was still in the color management, I clicked on the Add button to add this profile soft proofing, and when I finally found the file and clicked on it once, I got the message: "the storage control blocks were destroyed." Does OK, no information on what to do.

    Then, I went on the internet and do a Bing search and found that it is supposed to be an indication that there is corrupted system files. And, later, I'm a little lost as to what to do.  I didn't run any programs to solve this problem, even ' tho there is something called RepairImage.exe. I decided to come here instead, go to the source. Any help please? Thank you.

    Have you tried to start the computer in safe mode? If so, what was the result? Was question still persists in safe mode?

    Safe MODE: open and used two programs I normally use, and they recorded the changes that I made for them. In clean boot mode, I could see these changes had "taken."

    I tried to calibrate a screen, but only got the following message:

    Red X: display color calibration

    Display color calibration can not calibrate the selected screen [which is my LAPTOP LCD flat screen] because it cannot determine whether the display is in 'mirror', which means that the office is duplicated and show on different screens. Calibration of the color screen cannot calibrate a screen reflected.

    What has been the result of clean boot?

    Starting in MINIMAL MODE: the system enabled me to follow up to completion with screen calibrate (although I didn't want to load the profile of different color referred to in my original post). There is no messages of any kind.

    Re-started in Normal startup mode.

    What can I say? I tried not to make a screen calibrate mode.

    Re views 'mirrored' - I had recently a problem with my Optus Mobile Broadband, which is connected to my PC via a dongle, and the person that I spoke on the phone asked me, and I said yes, although normally I'm not agree to such a thing, remote connect to my PC while we were both on the phone; in other words, a type of Assistance Remote Desktop connection where he was responsible for what was happening on my PC. I could see what he was doing, of course, but not what was going on behind the black screen in the background.

    The program that was used to do this is called LogMeIn, lmi.exe. I have removed this program once we had finished and made sure my Services have been in the appropriate configuration. However, there are now two other installed programs with respect to the service - hwdservice.exe and ouc.exe. And the Optus program is set to automatic in the Services. Previously, it was manual. This has fixed the problem (intermittent network connectivity).

    I wonder if it could have been the cause of this current calibrate display problem.

    I will presume that rebooting the system Safe Mode and clean boot has authorized, on the matter.

    Thank you, Ramesh. Best regards

  • DHCP server does not start - the storage control block address is invalid.

    I use a trial version of the Pro Workstation 12.1.1 on Windows 10. I seem to have a strange problem where the DHCP service does not start.

    I tried to go into the virtual network editor and then restore the default settings, which had no effect.

    The event viewer displays the following text:

    CreateFile Version ioctl(): VMnet8 (327680 393216): the operation completed successfully.

    / The storage control block address is invalid

    Checked the service and it runs under a local, verified system account permissions on the config dhcp / rental file in c:\programdata\vmware\ and both have system configured to full control. I tried to run the vmnetdhcp.exe in a command prompt to we hope to get additional information, but cannot be executed directly. I can't figure out how to get out of documented logging dhcp server in order to track down what could be the culprit.

    I tried to uninstall workstation, restart, reinstall, restart both unsuccessfully. I had version 9 workstation that was installed previously, in which the trial upgrade.

    Any suggestion would be appreciated.

    Figured it out.

    It appears during the workstation installation 9, he placed vmnetdhcp and vmnetnat in c:\windows\syswow64 folder. Pro 12 workstation puts these files in the default directory (C:\Program Files (x 86) \VMware\VMware workstation). The service was always pointing to the old location even SysWow64 after an uninstall and reinstall.

    I replaced the files SysWow64 folder workstation and services started right up.

    Checked the work by selecting NAT and gets an IP address from the host machine.

  • OWB11gR2, model mapping - how to pass the parameter

    Hello
    There is a problem with the passing of input (e.g. in processflow) parameter for the Mapiing model with non-Oracle target.

    According to literature OWB parameter mapping Input operator only is not supported if the target table is non-Oracle
    (and really OWB error VLD-1330: assignment of invalid code model.) Enforcement unit... contains PL/SQL INPUT_PARAMETER operator and only Oracle target models of code can be assigned to it.).

    Are there ways to pass parameters to the model mapping in processflow?

    Thank you
    Oleg

    Oleg,

    Variable duration can be used to substitute values during execution.
    Variable duration can act as an input parameter (I don't know what looks like your CT mappings and what it does).
    I hope it's useful.

    More details can be found here http://blogs.oracle.com/warehousebuilder/2009/10/owb_11gr2_template_mapping_variables.html

    Its easy to set up and use.

    Thank you.

    Published by: user571269 on May 26, 2010 06:50

  • problem with changing the order of tab on tab control

    Hello

    I am aware that the same question has been asked over three years - but I can't yet find the problem in what I'm doing...

    Description: I have two controls tab, A tab with three tab and tab B with two controls on a Panel. For the following discussion, tab B is of no interest. Each tab control has several numerical indicators, of type integer and double. Now, I want to add a fourth tab control to A tab. This method works.

    Following and problematic stage, in the Publisher of the IUR I select the new tab (most right) and move two positions to the left. It's still ok until I try to display a numeric value of order of tab 3 (the new tab control is left to it). I get an error in calls to SetCtrlAttribute, complain about an invalid control ID... However, I didn't touch any control over the tabs, or add a new control. In addition, I did not touch the generated include file... Visual inspection did not show any changes in the include file (the new tab control is listed only when certain controls are added)

    Posting numbers on the first/far left tab control work only on 3 and 4 which are suitable for the new (and still empty) new tab will generate this error. Adding a control to the new label does not change the bahavior.

    Help is appreciated!

    Wolfgang

    Wolfgang,

    When you get the handle for your tab using GetPanelHandleFromTabPage:

    GetPanelHandleFromTabPage (MainPanelHandle, PANEL_TAB, 0, & TabHandle);

    the third parameter is an index for the specific tab you want to address.  If you change the order of the tabs, you can change the index, too.  For example, assume that you have a digital control on the third tab from left to right.  You want to assign some value, so this, you:

    GetPanelHandleFromTabPage (MainPanelHandle, PANEL_TAB, 2, & TabHandle);

    SetCtrlVal (TabHandle, TAB_numMyNumeric, 1);

    Now, you add a new tab to the left of the tab with the digital contorl.  The new tab is now index 2 and the original tab is index 3.  When you call:

    GetPanelHandleFromTabPage (MainPanelHandle, PANEL_TAB, 2, & TabHandle);

    you get the handle to the new tab.  There is a control with the same ID as TAB_numMyNumeric, so that you get a runtime error.

    Personally, I like to use an enumeration to my tabs so I can keep the lines:

    enum {MY_FIRST_TAB, MY_SECOND_TAB, MY_THIRD_TAB,...};

    So if I redesign the tabs or add a new one I just re - order enums and everything works fine.  Also, I used the same names in my constants of tab, to help keep things straight:

    GetPanelHandleFromTabPage (MainPanelHandle, PANEL_FIRST_TAB, MY_FIRST_TAB, & TabHandle);

    Tony G.

  • WRT1900AC - devices shown on the network map is not all visible in Windows 7 Explorer

    I just bought the router 1900AC as substitute of plugin for my previous WRT54GL router using DD - WRT.

    Each of the Linksys routers is configured for an IP 192.168.2.1 and each is configured to assign the device of intellectual property within this subnet.

    Each router works (not at the same time of course) when it is attached as a secondary router behind my Telus ActionTec V1000H DSL Modem/Router.  All my LAN devices with Gb ports are now much faster.  Internet speeds are tremendous.

    However, with the new 1900AC, my PC under Windows 7 router only see each other in the network of Windows Explorer pane.  In the content pane, I see my two Western Digital MyBookLive and my printer HP Laserjet devices, as well as media devices on my network.  But if I try to access a file (such as Notepad) and I select the network node, only the other PC appears in the list.

    The network of the 1900AC map shows all devices without any problem.

    The old WRT54GL router has also had no problem display all network devices.

    Can anyone suggest how I can do all the devices visible to my Windows 7 Explorer?

    WD (MyBookLive and MyBookLiveDuo) devices are connected to the ethernet ports.  Tablets connected via radio (a 2.4 Mhz and the other double 2.4 / 5.0 Mhz).

    After rally for second level support technology of LinkSys and waiting for their call, I saw what I knew, and since all devices appeared in the plan of network from the router, but not in Windows 7 is the router, or my windows firewall should block devices.

    My McAfee control center using I dropped the firewall and refreshed the Win7 network view - and all of a sudden all of the appliances were visible.  Problem solved.

    Then, I entered a new rule of connectivity that disable the firewall for all devices in the range * 198.162.2, introduced the firewall to the top and then restarted my PC.  All devices have remained visible after restart.

    Since each Windows PC has its own firewall, I repeated the process for my second PC.

    I have concluded that when Windows 7 sees a new router assigns a new network name and the network name does NOT inherit from the previous router settings - even if the routers have identical IP addresses and assign IPs client on the same subnet.

    For the benefit of third parties, if the router sees your devices but your windows PC does not work, drop your firewall and refresh your network view.  If the devices will be displayed, you must configure your firewall to let all devices in your same subnet.  This should apply to any firewall on any version of windows, I suspect.

  • Invoke the permissions map problem

    Hi all

    I caught a strange behavior to use the app parameter map on OS 10.2.0.

    I use following code to call the card of my application permissions.

    InvokeRequest request;
    
    request.setTarget("sys.settings.card");
    request.setAction("bb.action.OPEN");
    request.setMimeType("settings/view");
    request.setUri("settings://permissions");
    
    InvokeManager->invoke(request);
    

    After reinstalling it works normally. The user can change any permission. Example is attached (perms_normal.png). It shows that the rank of my app App_Name in title and subtitle App_Author. Also the dropdown list control is enabled.

    After the second call of the card, the screen is unresponsive on the interaction of the user. Example is attached (perms_disabled.png). As you can see the drop-down list button is disabled and online app has no name of the author. Also ranked app tap does not prevent to open the Details page of the authorization. At the same time that other controls work normally, I can type on the "back" button or scroll the list of applications.

    Then a few times user can change the permissions open my application.

    The problem on 10.2.0.1155 device simulator and q10 with OS 10.2.0.1157.

    Could someone help with this problem?

    I remember what a bug in Mac OS 10.2. I have not experienced this problem to 10.3, it seems to have been fixed since. There's not that you can really do about it for users still running Mac OS 10.2.

  • An operator of power output parameter mapping

    Hello. I use on the 11.2.0.2.0 Oracle Database 11.2.0.2 OWB.

    I fight and need a pointer. I am trying to create a map that will pass parameters to USER_DEFINED operator in a process flow. I'm going by the following example.

    http://blogs.Oracle.com/warehousebuilder/entry/how_to_use_user_defined_activity_in_owb_process_flow

    But he gives no details on how to build the mapping. The settings I want to spend are stored in a database table, and I have a packaged procedure that takes a parameter (the key) and returns the three parameters that must be passed all the way to the user_defined in the process flow. The procedure basically collects the values of the parameters as the lines and the pivots in columns.

    I created a map containing a constant for the key, a mapping process before you run the proecedure and an operator of output parameter of mapping as the target of the mapping. I don't know if the prior mapping process is what I use. But I don't know what else to try. As it is, the mapping will not validate.

    I had already tried to use an operator unpivot instead of the procedure (btw, why do pivot/unpivot have meaning in SQL and the reverse in OWB?).

    Please suggest the best approach to send my parameter values to the output parameter of mapping operator. Thank you.

    Hello

    I suggest you write a pl/sql procedure to the hand that holds the key as a parameter and the three return values as of the settings out. Import it in owb and drag it in the process flow. Bind variables of process flow to the transformation parameters, then to USER_DEFINED operator settings.

    Kind regards
    Carsten.

  • How to get the parameter values of a step type custom when I create file and adding a type of step seq

    I use lv 8.5 and teststand 4.0.

    I did a step type custom and recorded at the MyTypes.ini in pallets of type.

    I specified a default module by opening the properties of the custom step of *.ini type window, then I put some values of the parameters.

    T1) when I open teststand and I add the custom step type manaully in seq file, the labview module parameter values are represented.

    But, if to use file (create and add support prototype stage), the labview module parameter values has the default value.

    Using joint file, how to get the setting custom step type values I put in *.ini?

    Q2) each type of step are automatically by name through the use of LoadTypePaletteFilesEx. When I open teststand and I add the custom step type manaully in seq file, the module is loaded automatically. Inside the attachment, I use a prototype of charge and a fixed path where the module labview is to load the labview module.

    Can I load module automatically without using a prototype of charge or how can I get a dynamic path of type step?

    I solved Q1 for myself by using the mapping tab of the parameter within the configuration to the default module window.

    Everyone knows Q2?

    Thank you.

  • Error code; The parameter is Incorrect

    My operating system is "Windows XP Home." I tried to print a multitude of photos using the "Photo Print Wizard." When I click the link icon in the "picture and Fax Viewer", I get the error code; The parameter is Incorrect. The wizard does not open. I noticed that the icon in the 'Control Panel' folder has changed and the name is 'File' rather than 'printers and faxes '. I made every effort to change, including to remove and reinstall my printer but nothing helped. I can't delete the file or find the root of this folder in 'windows '. It seemed to me that the path of the file has been changed due to a change of name of this file in the path. However, I can still use a printer installed by other software to print. By the way, when I reinstall any printer, I do not see the printer in this file but it always says 'File' in the 'control panel '. The shimgvw.dll file is registered correctly as I can tell. If I try to launch 'Photo and Print Wizard' from the link on the left in the "Control Panel" itself, I just get a beep for error but no error code. The wizard does not start. This wizard is a very important tool to print multiple selections at once. I havn't used in awhile, so I don't know when it is first of all changed. Any thoughts?, anyone? Is there another install name of the package in the wizard to reinstall it from Microsoft?

    THIS WILL SOLVE THE PROBLEM

    1. Click Start> run type REGSVR32 photowiz.dll click OK

    NOTE: leave a space between the two.

    FACT!

    This will re - save the "TheAssistant printing photographs"and it will work from the folder 'My pictures'.

    * However, this does not resolve the question "renaming" of the file folder in the 'Control Panel', 'printers and faxes '.   That remains a mystery, I hope I can solve.

    2. If you are unsure if you have this module, DO a SEARCH using the search tool in the "Start Menu".

    3. If the search shows nothing in the directory... (drive letter) \Windows\System32, and then search the directory(drive letter)\WINDOWS\ServicePackFiles\i386, Scroll to module; photowiz.dll and 'Copy and paste' to your windows folder directory as described above. Depends on your drive letter on which you originally installed "Windows XP". It is usually a letter'C'.

    5. If you had to 'Copy and paste' this module in your operating system folder. Then, you must re-register the above method module.

    Thank you, GARTH

     

  • Why did I several drivers who say the parameter is incorrect, but updayes say that I have the most up to date?

    sound driver dvd driver keyboard driver...

    whenever I plug in a usb device and it installs a driver it says the parameter is incorrect, most control panel has several flags to say drivers setting is incorrect...

    Update all the drivers manually.

    What is the make & model of the system?

  • Windows could not start the background service Itelligent transfer service on local computer. 87 error: The parameter is incorrect

    I had a crash dump blue screen, tried solutiions to the problem and told me to go to windows update and download all windows updates. downlownloading all updates failed and I got the error.

    Code 80246008

    Click on get help with this error and was instructed to go to services and start the background intelligent service services, it gave me the error message;

    Windows could not start the background service Itelligent transfer service on local computer. 87 error: The parameter is incorrect

    Not very computer savvy! no idea what it all means or what I would do to this topic! Thanks a lot for any help

    Try this:

    To change or restart the Service (BITS) Background Intelligent Transfer

    1. Open administrative tools by clicking the start , clicking Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

    2. Double-click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    3. Right click on the service of Intelligent Transfer (BITS) background and then click Properties.

    4. Under the tab general, next to startup type, make sure that automatic (delayed start) is selected.

    5. Next to Service status, check whether the service is started. If not, click Start.

  • How the parameter "receive window Auto Tuning level" If set to "Disabled", affect the connectivity on HTTP traffic.

    We are conducting a slow in connectivity between the clients of the company and the application server in the same company, while working on the application (loading Java Applet by HTTP) server, we disabled parameter receive window auto level control, the performance was much better.

    My question is this parameter will affect other client HTTP on the same traffic?

    Hi Naday,

    Thanks for posting your query in Microsoft Community.

    • These computers are connected to the domain network?

    If so, your question is beyond the scope of what is generally answered in this forum of consumer and would be better suited for the IT Pro TechNet public.

    Please ask your question in the TechNet Forumsof .

Maybe you are looking for

  • TECRA M10 (models PTM40E/PTM42E) for Windows 7 upgrade

    HelloWe have two former TECRA M10 (models PTM40E and PTM42E) and you want to update the PC now for Windows7. After the installation of a new (larger) HARD drive, we ran the recovery DVDs. After that recovery completed successfully, we have installed

  • Findroute (SwitchExecutive 3.00)

    Hello I've updated SwitchExecutive v2.1 v3.00. I use Findroute() to get the path between 2 points of termination. I don't want to use the desktop mode but if the user connects 2 times the same points I don't return an error: Join the 2 Point Point1 C

  • Windows live help so slow!

    THE LAST WEEK or so I GO to WINDOWS LIVE AND IT WORKS SLOWLY TAKES 5 MINUTES to GET TO MAIL, BUT NOWHERE ELSE I'LL favorite IS very MUCH what I can do, my other places like yahoo, twitter, facebook, etc are fine

  • Installed the driver for Lifechat lx300, but can not hear the audio in media player

    I have a new helmet. I installed the driver but can not hear the audio in media player

  • Audio stutters every time that Premiere Pro is in the foreground

    System:Mac ProOSX El CapitanProcessor 3.5 GHz 6-Core Intel Xeon E564GB memoryGraphics AMD over-pants D500 3072 MBFirst Pro CC2015 v9.2Question: If I have Premiere Pro and After Effects opens at the same time, whenever the PP is brought to the foregro