the PCI Express 3.0 GT 640 work in my Pavilion Elite m9340f?

Similar Questions

• What version of the PCI Express x 16, it's my motherboard has

  I am running:

  Pavilion - p6320y

  -AMD Phenom II X 4 820

  -8 GB RAM

  -SATA HARD DRIVE 1 TB (7200 RPM)

  -Motherboard model: Violet6-GL8E

  Question: What version of the PCI Express x 16 is the slot on this motherboard: 1.x, 2.0 or 2.1?

  Can't get this information anywhere.

  Hello:

  I don't think that anyone will be able to give you a definitive answer.

  This article gives the date for the PCIe ranges various x versions.

  http://en.Wikipedia.org/wiki/PCI_Express

  Since you have a relatively new PC, I would say that it is certainly not less than PCIe 2.0 and probably PCie 2.1.

  I have a HP 8200 Elite CMT. I think that it is released at the beginning of this year, or very end of last year. 6570 PCIe 2.1, I use an AMD Radeon card in my PC.  It works very well.

  Paul

• HP Pavilion Elite m9340f desktop PC, want to upgrade of the GeForce GT 545 1536 MB DDR3 PCIe 2.0 x 16 video Ca

  I have a Hp Pavilion Elite m9340f desktop Pc, I want to upgrade to a Geforce GT card 545 1536 MB DDR3 PCIe 2.0 x 16 video, my pc has a 350 Watt PSU, but the video card requires a 300 watt with 18A on the + 12 Rail. The PC will support it?

  Looks like it should work perfectly... just open the side cover and check that your power supply provides a minimum of 18Amps on the 12 v rail. My HP (HP p/n 5188-2625) 300 Watt POWER supply has a power of 19A on the 12V rail.

  Frank

• Will be a pci express 3.0 video card work in my pc with pci express x 16?

  I have a HP Blackbird 002-01 a PC and want to install a video card Nvidia 680 due 1500 cuda GPUS.  Will be the new Nvidia card with a pci express 3.0 design work of bus in my pc with a PCI express x 16 bus?

  Thanks for the info.

  The way I see it is, if I can expect an effect of butterfly-back similar performance for graphics speed, that shouldn't be a problem.  The main reason I am looking at the 680 gtx is due to the 1500 cuda GPU.  I use the Blender 3d graphics program that has the new rendering of engine Cycles that can use the cuda GPU for faster processing.  My current Nvidia gtx 260 has only 200 GPU, for most large number in the 680 should provide a significant increase in render speed.

  Thanks again for you help.

• What version of the pci express x 16 graphics cards can handle office of a747c?

  What versions of pci Express x 16 graphics cards can handle desktop a747c?

  Your motherboard must support PCI Express v1.0, v1.1 and v2.0 cards without a problem. v2.1 and newer cards can be problematic.

• How to get the thumbnail pictures to show? I m using hp pavilion elite hpe with windows 7...

  My computer is a HP Pavilion Elite HPE. Windows 7 64-bit operating system. 16 GB OF RAM.

  My computer is unable to display thumbnail images of the photo files. If I want to see which image is behind the icon that I have to use another program to open and view the file photo... As I remember it was the problem from the beginning...

  All photo as PS and other programs show thumbnails in their browsers.

  Hello

  Here's something to check.

  Open windows control panel, open Folder Options, click the view tab and Remove the check mark next to "always show icons, never thumbnails".  Click on apply to save this change.

  Kind regards

  DP - K

• HP m8000: unrecognized in the PCI-Express x 16 slot video card.

  I am upgrading to a former m8000. Hp already put a new 750 watt PSU in it Corsair and it does not always recognize any of 3 pci-e video cards I've tried. I already went into the bios and changed the video settings to pci-e and still nothing. Is there only certain video cards compatible with this thing or what. Any help would be greatly appreciated. Thank you very much

  This is because the latest gen video card is compatible with UEFI BIOS, not the legacy BIOS that has your PC.

  The BIOS legacy do not see it as a gift.

  You will need a video card that only inherited BIOS compatibility or that has a switch that allows you to group compatibility legacy BIOS and UEFI BIOS.   Sapphiretech of the 200 series r7 r9-300 series video cards meet the criterion.

  http://www.sapphiretech.com/productdetial.asp?pid=482F813A-3525-4266-B92E-B801DD41BDB1 & lang = eng

  The image shows the location of the switch type video card BIOS

• PCI x 16 supported version for HP Pavilion Elite m9340f desktop

  I have the m9340f and I want to upgrade the graphics card, and I bought the Zotac NVIDIA GT 630 Synergy Edition 4 GB card. It requires a PCIe 2.0 X 16 slot, however it says it supports version 1.1 of the X 16 architecture. Anyone know which version is installed in the card mother m9340F.

  Thank you!

  Hello:

  According to the specifications of Intel chipset on the link below, the chipset Intel G33 your model has, PCIe x 16 revision 1.1.

  http://Ark.Intel.com/products/31914/Intel-82G33-graphics-and-memory-controller

• My TV distance to work on my Pavilion Elite HPE.

  I just wired the tuner of the TV, and I would like to use the remote control to watch TV via Windows Media Player. I have Windows 7.

  There are batteries in the rmeote, but I suspect I need to join one of the parts supplied with the HP product.  There is a small red plastic device and a larger black box (about 3/4 "x 1-1/2" rectangle).  These two devices have strings.  What should I do?

  You do not mention your exact product number, but try this:

  To get your remote working, you must connect the cable with the Red din connector (it looks like a stereo 3.5 mm plug) to the rear of the unit.  The plug (or port) to use is low and is marked 'ir' - it is also red.  the other end of the same cable is the ir receiver and can be placed anywhere where you have a direct line of sight on the remote control.  This cable is long enough, designed that way, so you can put your pc anywhere in the room.

  Another cable that you mention, the one with the Red tear eye some adhesive on the other side with a peel-off.  Which is used to allow you to use the remote control of your pc to control your set-top box or other media as a pay tv box.

  Lear more here:http://support.hp.com/us-en/document/c01744910

• What is the link state Power Management under PCI Express power management Options list

  What is link State Power Management under PCI Express power management Options list.

  What is link State Power Management under PCI Express power management Options list.

  Hello

  The PCI Express Link State Power Management option is part of the PCI-E specification and is working with the State active power management (ASPM) in Windows 7.

  It is a complex subject, but can be simply described as follows.

  There are 2 levels of power management in PCI Express options.

  The difference between these 2 options are the energy savings compared to the latency (time to recover from sleep state).

  If you select the first option, moderate energy savings, energy savings are lower, but the time to recover from sleep state (latency) is much shorter.

  If you select Maximum energy savings, energy savings are more important, but the time to recover from sleep state (latency) is much longer.

  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• HP Compaq 8100 Elite: Video unrecognized card in PCI-Express x 16 slot for security

  I disable the PCI Express connector in the computer - security - Slot Configuration on BIOS.

  I don't know that my card on Board did not work and now machine does not start, machine beeps 6 times (error video card).

  I can't access the bios.

  I try to reset the CMOS, remove the Green rider, remove CMOS battery, press the button within 10 seconds, press the power button (to remove rest of energy.

  But none of it works.

  Can someone help me?

  How can I reactivate PCI Express x 16?

  Hello:

  If your integrated graphics card does not work, and reset the CMOS does not work, you can try putting the PCI express x 16 video card, you now have in the location PCIe White x 4 slot (slot next to the slot PCIe x 16 black white video card) and see if you can get into the BIOS to change the PCI x 16 setting.  It might work in the x 4 slot.

  If it does not, you will need to install a video card PCI (the one that goes in one of the white PCI slots) and use it to get into the BIOS, so you can change the settings to enable the location of PCIe x 16.

  So see if you can find a cheap, used, video card PCI on eBay, and should allow you to have the video again.

  You should also make sure you have removed all the connections of the computer when you reset the CMOS (all cables, power supply, mouse, monitor, etc.).

• Weird PCI Express Mini problem.

  Hello everyone. I just noticed a very weird problem in W520 (4270CTO). I added a device on the PCI express slot I have attached HAND and thread in the correct position in the device (RED wire sleeved by HAND) and wire sleeved BLUE to the power supply, the problem is that nothing happens. It's like the PCI is dead or the son do any work. Nothing happens when the laptop boots to Windows 7 (as new hardware found notification), the device seems ok. I tested it in another laptop and it works. Do you know why this phenomenon occurs?

  P.S.: THE DEVICE is connected to the PCI Express port that is higher next to the HARD disk. No one who is at the bottom of the laptop.

  Hi all

  I found the solution from another forum. A member told me that the laptop is disabling silently hardware incompatible when it isinstalled on the upper PCI - slot.My only concern now, is if there are drivers for the network card, becaue I can't find. I think that even if they are made to other types of machines that they work with my W520.i do not know if you agree well.

• PCI Express x 16 does not?

  I have a HP Pavilion a1730 (Vista OS) and a few weeks ago, the screen went black (no received no signal) after turning on the PC. I tried / cable with my laptop screen and they work fine. the screen also works with the integrated graphics card and VGA on the back of the PC. I replaced the graphics card I had installed twice there are three-four years in the PCI Express slot and in both cases, the problem persisted. The manufacturer technical support card grapics said that most likely the slot PCI Express has gone wrong. Indeed, when I removed the 3-4 years-old graphics card, I had to pull hard because he had "stuck" in the slot. However there is no visible damage. Material detector does not see the replacement of the graphics card, the driver seems to be properly installed. The replacement of the card properly set match for Watt and amperage.

  Should I bring the PC to a service center and if so, where in Essex county NJ? I couldn't find a list of service centers in the HP website.

  Since the post it seems that the onboard graphics is still working OK.  It could be that the PCI slot has failed if a replacement of the graphics card does not resolve the problem.  In this case, I would do it from the options.  If she is taken to a repair facility, the cost of repairs would easily exceed the value of a computer this old (over 5 years).  Just my opinion, but use it with onboard graphics until more fails.

• Dimension E520 PCI Express x 16

  Hello

  I try to install a network card Ethernet HPE 1 GB 4 ports 331T, PCI Express x 4 in the PCI Express x 16 slot of my Dell Dimension E520.

  According to the documentation for the network card, it should be compatible with a 16 slot x ("four-lane (x 4) PCI Express compatible with x 4, x 8, and x 16 PCI Express slots").

  There is an error when the computer is on: LED 1 and 3 are lighten, which means that there is a problem with the RAM installed. However, the computer works well when the PCI network card is removed.

  Latest available BIOS is installed. Also tried to disable the NIC card, without success.

  This PCI card is really compatible?

  Thanks for your help.

  Where is installed your plug-in software component video card or do you use onboard video?

  It seems that you have only one PCI-e x 16 slot in this model and it is probably reserved for a video card. BIOS can research (and not finding) RAM that normally would be on a video card.

  The only other PCI-e slot is x 1 so that network card probably won't in this niche.

• upgrade Alienware Aurora - version PCI Express graphics card

  Hi, I want to improve my Alienware Aurora with a new graphics card. I always use original equipment, an ATI Radeon HD 5700 Series (with GDDR5 1024), which runs with PCI Express 2.0 x 16. I had no problem with the card, but as I can't play Company of Heroes 2 with all the settings above, I want to get better. As I was looking for a new card, I wondered if my system supports only the PCI Express 2.0 version or also higher versions (like 2.1 or 3.0). Unfortunately, I couldn't find this information (my motherboard is an Alienware 0H869M). Maybe you can help me. If you have a recommendation of a good graphics card, I would be grateful that as well. Thank you.

  You can use the latest AMD Radeon cards that were designed for PCIe v3, they work only PCIe v2 mode, and generally it will not create any problems. I wouldn't say anything much higher than a 290 R9 or R9 x 280.

  You can also choose any NVIDIA card brand because they can also run on PCIe v2 and most people actually do this right now because they have not upgraded to a v3 PCIe system.