The PCIe for USB 6211 OEM replacement

Hi you all,.

We want to change our design to use PCIe card data acquisition, since we had a few USB driver problem in the past. Is the PCIe-6321 a good match to replace the capture USB-6211-OEM card

Is there a better alternative?

Thank you

Fabrice

Hello Fabrizio,

Thank you for taking an interest in our line of PCIe cards DAQ. I took a glance at the USB-6211 OEM and PCIe-6321 to see if they are similar in specifications and capabilities. I would say the 6321 is a good match to replace your current USB card. As long as you intend to use no more i/o lines than expected or exceeds the designated sampling rate then it should be a good substitute.

If you need high speed sampling or more i/o lines for various tasks, then another card can better meet your needs.

The resources below compares several of our devices (USB and PCIe) X series.

What is NI X Series? -1. Presentation of the product

---

These links may also be useful during your upgrade:

Major differences between series E, series M and material X NI DAQ series

---

Guide to upgrade NI X series (USB to USB devices however)

---

Kind regards
Alex C.

Tags: NI Hardware

Similar Questions

  • Video device USB has a driver problem__ __There is a problem with the driver for USB video Device.__Device information __Name: __ID USB video device: USB\VID_05CA & PID_180C & MI_00\6 & 69C3BD0 & 0 & 0000 code __Error: 10 _ _ _

    I hava a dell inspiron 1440 with windows 7 and a a few days ago, my webcam was working just fine but know that it gives me this after troubleshooting

    Has a USB video device driver problem
    Not fixed
    There is a problem with the driver for USB video device. The driver must be reinstalled.
    The device information
    Name: USB video device
    ID: USB\VID_05CA & PID_180C & MI_00\6 & 69C3BD0 & 0 & 0000
    Error code: 10

    Hey laloo.16,

    As the error message states clearly that reinstalling the driver is required, please do the same. You can uninstall the driver that is currently installed from the Device Manager.
    To access Device Manager:
    1. go to start and type Device Manager.
    2. Select Device Manager in the control panel list.
    3. go to your device.
    4. to remove:
    Right-click on it and select Properties.
    5. Select the driver tab and click on uninstall to uninstall the existing driver.
    6. close Device Manager.
    Now go to the link below. Download the Dell WebCam software for your product.

    http://support.Dell.com/support/downloads/DriversList.aspx?OS=W732&CATID=-1&DateID=-1&impid=-1&OSL=en&typeid=-1&FormatID=-1&SERVICETAG=&SystemID=INSPIRON1440&hidos=WLH&hidlang=en&TabIndex =

    Please choose the appropriate version of Windows 7.  Install the driver and see if that brings your webcam to work.

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Code C++ for USB-6211

    Hello

    I was wondering if the code examples provide with the DAQm base driver software, written in C, is fully compatible with C++.

    I'm trying to develop my own C++ program, that will record the tensions of 3 different sources using the box USB-6211.

    Hello burned,

    I know a lot of code written in C can be compiled in C++, but I can't promise that the DAQmx Base code written in C will work.  Have you tried to compile an example of C in C++, and if so, did that work for you at all?

    Kind regards

  • Can I use two USB 6211 to replace a USB-6009

    Hello

    I got a labview vi., 5 output channels digital, 2-channel digital input, 2 analog inputs are necessary for the execution of this vi.  Initially a 6009 usb is used to run the vi. But I have only two usb ports 6211 now, which has digital to digital for each data acquisition 4 inputs and 4 outputs. I wonder, can I use two usb 6211 to run the vi. ? What should I do?

    Reverse lines are wrong, does that mean it will display 0 for false and 5 V 1.

    Active drive is the normal mode of the digital output: it generates tension when said.

    I forgot one thing: that you are behind the wheel of these lines, how much power do you need?

    Analog output is less powerful, it can give only 2-4 mA, while the digital output 6009 could give 8 my.

  • Portege R700 - Win7 - cannot find the driver for USB Multimedia Audio Device

    Are there any Windows 7 drivers for the "USB Multimedia Audio Device" found on a R700 with the Toshiba Hi Speed Port Replicator II (PA3916U-1PRP)?

    In "Devices and printers", there is a device in the section called a + USB Multimedia Audio Device + Unspecified +. Windows 7 can not find the drivers for it. Audio seems to be working through the port replicator.

    The only related issue I've seen is that sometimes, when I press the "eject" button, Windows complains that a device is in use and the ejection is defective. This is very similar to that reported as ' [Undock R700 question P3838 |]» http://forums.Toshiba.com/T5/General-troubleshooting/R700-undock-from-P3838-issue/TD-p/149453].

    In my case Windows tell me an application to use it or the device in use. I strongly suspect the audio device.

    I have not found a solution so eject manually despite the failure or sleep it and then eject manually. I didn't notice the two approaches being necessarily better.

    HI PeterH,

    Just a simple question: do you use the preinstalled version of Windows 7 at Toshiba and you have most unknown devices in Device Manager or just this USB Multimedia Audio device?

  • Can not find the drivers for USB

    I'm trying to update my USB drivers and although I have loacted the list of available drivers, there don't seem to be any USB ones.

    Hello

    Why do you want to update your USB drivers? If you don t have win95/98/me you don t update anything it either because the only drivers for USB are integrated into windows.

    You can only update the latest chipset drivers that could improve the performance of USB and fixed a few bugs. But it depends on what chipset you have and if the manufacturer of the chipset offers the chipset drivers.

    See you soon

  • From Windows 8.1 to Windows 7, my HP Pavilion e101sl 17 laptop lost the drivers for USB

    Hello guys, from 8.1 to Windows to Windows 7, my laptop HP Pavilion 17-e101sl lost the drivers for the USB controller, USB3 does not work, can someone help me please, thanks in advance

    Hello:

    Here is the link for the usb driver 3, you must...

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127803-1&cc=us&DLC=en&LC=en&OS=4063&product=6521489&sw_lang=

    Here's how to get the graphics to work when using W7 x 64...

    1 install the Intel chipset driver and restart.

    https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=816&DwnldID=20775&keyword=chipset+ins...

    2. install the Intel graphics driver and restart.

    https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=23714&lang=eng&OSVersion=Windows%207...

    3. download and install MS .NET Framework 4.0.

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=17851

    4. download and install the latest amd catalyst driver beta.

    http://support.AMD.com/en-us/KB-articles/pages/latest-catalyst-Windows-Beta.aspx

  • Dell laptop, cannot install the drivers for USB drives.

    Although the fans more of my family and the power of Google, I can not solve this problem is to have my sister.

    Each USB key she inserts into his laptop computer are, although recognized, never installed.  For example, when I install in another computer USB flash drive, the typical action should be that either the system operating rises automatically the drive to a letter on my computer, or invite an Assistant saying that it will try to install the drivers for the flash player and do it automatically.

    When I insert a flash drive into this laptop, however, it will prompt me to find the location of the folder where the drivers for the USB key is installed.  When I ask for an alternative, he will try to find it through Windows Update for drivers, then answer he found nothing.

    I tried to assign the same flash as a generic device drive in Device Manager, but nothing helps: the flash player still will not mount in my computer properly.  Windows Update, moreover, indicates that the system is up-to-date.

    Any ideas on how to fix this, so that the laptop in the world will recognize volumetric flash drives and devices entry without asking for the location of the driver?  That is, a system of 'plug & play' with all USB devices?

    "Windows Update, moreover, indicates that the system is up to date."

    You get the manufacturer's operating system hardware drivers: Dell.

    http://support.Dell.com/support/downloads/index.aspx

    Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

    See you soon.
    Mick Murphy - Microsoft partner

  • Re - activate the AutoPlay for USB (option-list in right click) device

    Win-7 - 64-bit, 16 GB RAM, SSD drive (C)

    All of a sudden, when connecting a Flash stick or Player cards and just clicking on... the function "Auto Play", with the drop-down list - is GONE!
    I used to go there, select "Download images with Adobe Bridge" - to transfer images in bridge
    I read that the Microsoft eliminated the AutoPlay for security reasons... feature updates?
    Please see also this link: (I'm I was wondering if it is save to do as suggested below.) (or any other suggestions?)
    I checked my: his game to 0x000000FF (255)
    Thank you

    In the following registry key: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer and possibly (but not necessary in my case) in: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer

    The value:

    "NoDriveTypeAutoRun" set you 0x000000FF (255) which I discovered disables Autorun on all devices.

    Set this value to decimel 145 (the default value).

    Another value (I have not confirmed that they are correct)

    0x1 disables autoplay on drives of unknown type. 0x4 disables autoplay on removable drives. 0x8 disables autoplay on fixed drives. 0x10 disables autoplay on network drives. 0x20 disables autoplay on CD-ROM drives. 0x40 disables autoplay on RAM disks. 0x80 disables autoplay on drives of unknown type.

    0xFF disables autoplay on all types of readers.

    Hello

    The function of auto run if not used correctly could lead to the breach of security. That feature could have been disabled by an update, there are still options made to enable it again. He has the discretion of users to use it again or not, based on how often or more often they use the service. As you already know, there is section that will allow you to disable or enable the feature by using Fix - it.

    Thank you.

  • Current limit for analog output on USB-6211-OEM

    The current output drive listed in the specifications of this card is of +/-2 my. What happens when you try to go beyond that? Is there damage to the card or is it simply rail out around 2mA. For example, if I connect a 1000 ohm load. I'm okay, if I have the output up to 2V (= 2mA), but what happens when I exit 3V with the same 1000 ohm load?

    Thank you.

    Protection of the overdrive is 2.4 mA, which means that you can ride this current without damaging the card, but a current of approximately 2 mA, tension is more guaranteed to be compliant to the specifications.

    Kind regards

    Brian P

  • How can I upgrade the firmware for USB 3.0

    I have Windows 7 Ultimate 32 bit operating system installed

    You are quite welcome.

    Your laptop is not delivered with USB 3.0.  Since your laptop does not have a PCI-express port, the USB upgrade is not possible.

    The specifications of your computer laptop are here.

  • How to assign letters to the editor for USB external hard drives permanently

    I have an external USB hard drive where I store all my media files.  When I have Windows Media Player search this drive to index all my files, it indexes them in a specific directory.  I also use Media Player to sync my MP3 player using the playlist option in Media Player.  If I plug another external USB storage device until I plug the hard drive, it must be the drive letter, & if I try to sync my MP3 player, all of the flie links are broken.  Is it possible to set up a reserve of drive letter for my hard drive so that it will always be available on this hard drive when I plug?

    USB Drive Letter Manager by Uwe Sieber - http://www.uwe-sieber.de/usbdlm_e.html MS - MVP - Elephant Boy computers - don't panic!

  • Install the drivers for USB devices is time consuming

    Original title: slow down the device

    I use Win7 Ultimate (32 bit) on my computer compaq laptop.

    Whenever I connect a USB/device via USB or Bluetooth device, installation of the driver takes a long time.
    Please help me solve the problem soon!

    Hello

    What is brand and model unit?

    Method 1: Run the hardware and devices Troubleshooter

    See the following site:

    Open the hardware and devices Troubleshooter

    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

     

    Method 2: Clean boot

    When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

    See the following site:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.microsoft.com/kb/929135.

    Note: once you are done with the boot, follow step 7 article to set your computer to normal startup.

    Note: When you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check see topic wireless are turned on (Enabled).

    Method 3: Update the Bluetooth device drivers

    See the following site:

    Updated a hardware driver that is not working properly

    http://windows.microsoft.com/en-US/windows7/Update-a-driver-for-hardware-that-isn ' t-work correctly.

  • Should the RAM for an ESXi host replaced the same ones remaining?

    Hello

    We are running a cluster of servers ESXi 5.1 - 2 of them are Xeon E7440 2.4 GHz (64 GB of RAM) and 1 of them is Xeon X 5460 3.16 GHz (32 GB of RAM).

    Currently, the use of the memory of all three ESXi hosts are about 60%.

    We will replace the Xeon X 5460 server with a new physical server.  We would like to ask for your opinion how much RAM you must order (my manager of door on the cost of the new server).

    Thank you

    Hi again Tony,

    1. No, it is not high at all. You should begin to worry about this, after reaching approximately 85-90%.
    2. My short experience with clusters of memory-unbalanced, adding that more memory would be a lot like the DRS manages memory locations & 'kindness host' in the right direction, but I'm not really sure how that would turn out in the long term. If you decide to present more memory to your server, it would be possible to upgrade the other two guests sooner than later
    3. Yes, ask the seller would be the right thing to do. Please note that you will need to put in place an enhanced vMotion to conform to your next "older" CPU then, because you'll have something other than X 5460. I guess you'll have to "intensify" a generation or two, depending on what you have found.
  • What is the resolution for USB-6210 for positive ranges of entry?

    Hello

    I use USB-6210 to sample different types of sensors and each has its own range of values. I have two questions:

    (a) what are the fixed beaches of USB-6210 where most suitable is chosen automatically depending on the settings of user intput scope? They are to +/-0.2, +/-1, +/-5 and + /-10?

    (b) I know that if I select + / 10 as the range and then I will get the resoultion of 20 /(2^16), but what happens if I want to the positive range only? So if my sensor gives values between [0.10] and data acquisition would choose the + / 10 range. Then could get a resolution higher than 20 /(2^16) and how?

    Thank you.

    (a) Yes, they are the ranges listed in the manual

    (b) No, a fixed range means a fixed range. You cannot change them.

Maybe you are looking for