The Peer Name Resolution Protocol service (PNRPsvc) or peer network (p2pimsvc) Identity Manager service does not work

Similar Questions

• I want to add a printer, but get the error message "print spooler service does not work."

  I can't print from my computer.  This has happened with no other visible defects on the computer or the printer.

  When I use the printer in case of problem, and hit the 'add printer' link, I get the error message "print spooler service is not."

  "I did a search on"print spooler"but got no result

  Duane

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  Cleaning of printers

  NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article".  Instead, go to the other link and download and get and use the utility 'cleanspl' such as described here.

  If the suggestions below do not resolve your problem, after back and don't forget to include the following information:

  • The version of Windows you have, including service pack (start > run > winver > OK)
  • The brand and model of printer you have (includes the manufacturer, model and model number, as in HP Deskjet 6800)
  • How the printer is connected to the computer (parallel, USB, network, wireless, etc.).
  • It happened just before this symptom started
  • What application antivirus you have and if your subscription is up to date and has been maintained continuously
  • The full text of the error messages related to printing, without paraphrasing

  
  

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.  If you have (or had) a Lexmark printer, follow the instructions on the following site before installing the new drivers, as explained in its first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

• Peer Networking Grouping Service does not work; How can I make it work?

  I use Windows 7 and trying to set up a home network I am unable. After you run the troubleshooter, the only problem is that the Peer Networking Grouping Service does not work. Messages to indicate there is no other problems other than Peer name resolution Protocol (PNRPsvc) Service or the Peer Neetworking Identity Manager (p2pimsvc) Service is not running.

  How can I solve this problem?

  Hello

  First delete the file idstore.sst from the following location: C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking\idstore.sst and once you remove, restart the service Peer Networking grouping.

  Follow the steps to restart the service:

  a. click Start, type Services.msc in the search box and press enter.

  (b) in the Services window, search for Peer Networking Grouping.

  c. make a right click the service: peer networking grouping and click restart.

  Also, see the following Microsoft articles:

  Establishment of a network domestic:
  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

  Why can't I create a homegroup? :
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-create-a-HomeGroup

  Hope the information is useful.

• Connection problem: The DHCP service does not work.

  Original title: connection problem

  After got rid of a virus, my computer is always trying to get the network address. I found that the DHCP service does not work on my computer. How can I reinstall. I am running windows xp service pack 3

  Hello

  Follow these steps and check if they help.

  Step 1:

  Look for the DHCP Client service and DNS Client Services if they are started.

  a. Click Start.
  b. click on run and type Services.
  c. click right on - run as administrator.

  Check if the below mentioned services has mentioned State and type start.

  Client DHCP started Automatic\Manual.
  Client DNS started Automatic\Manual.

  Also check the dependency that are required for the DHCP Client services and DNS Client Service runs.

  To verify that double-click the service, and click the Dependencies tab.

  Step 2:

  I suggest you to reset TCP/IP settings to solve the problem.

  How to reset the Protocol Internet (TCP/IP)

• No wireless networks not found on laptop - the WiFi windows service does not work on this computer

  Hello

  I have a laptop model Toshiba P205-56347 running Vista home premium and a lynksis WRT54G V8 router model.  The WLAN light is solid and the internet light flashes on the Linksys.  I have Comcast cable as my ISP.

  I've seen reported similar problems.  All of a sudden my wirless acess stopped working, some networks are displayed and I get the message 'windows wireless service does not work on the computer.  I am not able to restart the windows wireless.  I can't connect to the internet on the laptop.  I have a DELL PC and can access the internet here if necessary.

  In the network and Discovery Center, I see that network discovery is disabled.  I can't set it to on.

  Under system devices, I have the following network cards: Intel (r) Wireless WiFi Link 4965AGN and Realtek RTL8101 Family PCI - E Fast Ethernet NIC (NDIS6.0).

  Help, please.  I'd appreciate any help.  I need a good starting point for resolution and wouldn't start using suggestions that corrects other issues.  I design financial systems and purchase online, but I'm not a technical person with regard to updates Vista, drivers, etc..

  Thank you! After reviewing the responses to similar problems, can anyone suggest if I should try one of the following values: 1. run SCF/scannow at the command prompt I don't know what that's going to fix it and do not want to make the current problem worse. 2. download the driver for the network drivers. If you would be grateful if someone could help me find the driver and download it. 3 reinstall Windows Vista Home Premium SP1 since the restoration of Toshiba CD I would appreciate greatly any information. Donna

  Hi blondswede,

  You can try running sfc/scannow to see if you have corrupted files. That won't be a further problem on your pc. After that, you want to make sure you have the latest drivers for your laptop, especially drivers of the NIC (network card). Go to the following link to Toshiba for your model and download those:

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/modelContent.jsp?CT=SB&OS=&category=&MOID=1757721&RPN=PSPB3U&modelFilter=P205-S6347&selCategory=3&selFamily=1073768663

  If you're still having problems, and it has recently emerged as a problem, you can try to restore your system to a point in time before the problem started to use the system restore. Here are the steps to follow:

  • 1. Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.
    2. In the System Restore dialog box, click on choose a different restore point and then click Next.
    3. In the list of restore points, click a restore point created before you started having the problem, and then click Next.
    4. Click Finish.

    The System Restore tool

    If the problem you are experiencing started occurring recently, you can use the System Restore tool. Using this tool, you can restore the computer to an earlier point in time. The tool using System Restore may not necessarily help you determine the problem. When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

    To restore the operating system to an earlier point in time, follow these steps:

    The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Let us know how it works and if you need additional assistance.

  Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error: The Windows wireless service does not work on this machine and is called autoconfiguration WLAN service.

  Original title: I do not see my available networks

  I get this message when I try to solve the problem: Windows wireless service does not work on this machine and is called autoconfiguration WLAN service. Does not start Windows wireless service failed questions available detection area 5 Windows wireless service does not work on this computer only set not Windows wireless services is also called the autoconfiguration WLAN service.  Network Diagnostics log file name: 5894B3A3-5541-48-A8FE-7A7E2E8E3B10. Detection of Repair.Admin.0.etl detail information name of the computer Collection: RODRIC29 - PC Windows Version: 6.1 Architecture: amd64 time: Thursday, August 23, 2012 12:27:11 Publisher details Windows Network Diagnostics detects problems with network connectivity.  Package version: 1.0 Editor: Microsoft Windows can help anyone? (Windows 7 Inspiron computer laptop)

  Hello

  1 have you checked the State of the wireless autoconfiguration WLAN service in the services window?
  2. do you have security software installed on the computer? If Yes, is it updated regularly?

  3. have you done any software or hardware changes on your computer before this problem?

  4. What are the troubleshooting steps you have tried to solve the problem?

  Refer to these methods.

  
  Method 1:

  We will first try to manually start the wireless service, i.e. the WLAN AutoConfig service.

  (a) click Start, type Services.msc and press enter.

  (b) locate the autoconfiguration WLAN service, double-click to open its Properties window.

  (c) on the general tab, change the Startup type to Automatic and click on the Start button.

  (d) click apply and then click ok.

  (e) try to connect to the wireless connection and check the result.

  See also:

  For more information on the wireless settings, see this link:

  http://TechNet.Microsoft.com/en-us/library/ff802404.aspx

  Method 2:

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  See also:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Check if it helps.

• printing problem "the print spooler service does not work.

  Original title: printing problem

  I want to print, but a warning said "the print spooler service does not work.  What is c? or what can I do?

  Hello

  I suggest to follow each steps of troubleshooting provided in the link below and also suggest to run the Fixit tool in step 2 and verify if it helps solve the issue

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• I can't check the updates, because he said that "the service does not work."

  I can't check the updates, because he said that "the service does not work."

  Error: Windows Update cannot check the updates, because the Service is not running
  http://support.Microsoft.com/kb/2730071

• Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer

  My computer stops the update via WIndows Update Component

  Whenever a try to do the manual update using this component I get the message;   * Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer *...

  My computer has a few updates, but can not run these update

  Whenever I try to run computer shotdown/updates remain frozen for a while and stops without updating

  He starts to run updates 1 of 13... and stops

  If I shutdown normal e, computer stay likehanging 1 hour without stopping.

  I would like to know how to solve this problem

  Thank you

  Concerning

  Gladmar.

  Hello

  Were there any changes made on the computer before the show?

  Perform the following methods and check:

  Method 1:

  I suggest you to check if you are able to access Windows Update service and ensure that the following services are started. If it is not started, follow these steps:

  a. click Start, type services.msc and press enter.
  b. search Windows Update.
  c. right-click on the service and select Properties.
  d. in type of startup, select enable.
  e. click Start under the Service status.
  f. click OK.
  g. Repeat steps c to f for the following services:

  Background Intelligent Transfer Service
  Cryptographic services

  If the steps do not help to solve the problem, you can go ahead with the methods mentioned below and check.

  Method 2:

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Method 3:

  Your anti-virus software is in conflict with Windows updates. You can test this by temporarily disabling your antivirus:

  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 4:

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

  See also:

  Troubleshoot problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Updates: frequently asked questions

  
  http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions

  I hope this helps.

• Get the error the Service does not work when you try to update

  Original title: Dell Inspiron 1545 model

  My Labtop wife; the automatic update is enabled; but will NOT be updated. When I try to update; There are NO error codes. After trying to update. The computer

  addresses by specifying THE SERVICE IS DO NOT running. You must restart; also the F8 key does not work.

  Hello

  1. What is the error message right on the service does not work?

  2. were there any changes (hardware or software) to the computer before the show?

  Perform the steps in the link and check.

  The problems with the installation of updates (Windows Vista)

  Hope this information helps.

• Try to run Defrag/Task Scheduler Service, get the message 'Task Scheduler Service does not work' in Windows 7

  I'm trying to defragment my system (Windows 7).  When I go to START and type in "Defragmenter" it states: "the Task Scheduler Service does not work.  "Start the Task Scheduler Service and try again.  When I do, the following message appears: "the remote computer is not found.  Please tell us what to do next.  Thank you.

  Task Scheduler, Windows event log, and the RPC end Point Mapper are included to start automatically?

  Click on the Start button and select Control Panel, administrative tools, Services. Locate the Windows event log in the list. Check that he started and that the startup type is automatic. If it is not set to automatic, right-click and select Properties, general tab. There is a box after the startup type. The options are available in a menu drop-down by clicking on the down arrow to the right of the box. Make the change and click apply and then click OK. Restart the computer and verify if it has started.

• Get the error 'windows wireless service does not work on this computer' diagnose in Wireless adapt

  Get the error 'windows wireless service does not work on this computer' diagnose in Wireless adapt. The same is not solved.

  I'm unable to locate networks wireless on my Windows 7 PC. Help, please.

  Try to uninstall/reinstall the drivers for your wireless network. You should be able to get them from from Toshiba Web site.

  I hope this helps.

• the user of Windows 8 service does not have the opening of the session; user not found.

  I can't sing on my PC. The display of error messages: SERVICE does NOT have THE USER LOGIN; USER NOT FOUND.

  I only have one user on my PC and its administrator. I tried the system restore and I did not work.

  Hello

  Please try this patch and see if that helps:

  http://www.kapilarya.com/user-profile-service-failed-the-logon

  Hope this helps, good luck :)

• "The Windows update service does not work. Please restart your computer.

  If I click on "Check for Updates", a dialog box appears:

  "The Windows update service does not work. Please restart your computer.

  I rebooted several times, but the same error.
  Help, please.
  Thanks in advance.

  This site will help you get the update of Windows running service

  http://pcsupport.about.com/od/Windows-8/a/Windows-Update-settings-Windows-8.htm

• Discovers the problem of transfer Server - Service does not properly and maintenance in the waiting mode

  Hello. I have try to add view transfer Server Infrastructure and get the problems of follow-up:

  1. after that I have add forwarding server to "transfer servers" in the view manager, he is "on hold" and "missing transfer Server Repository. But on the record transfer servers 'System health' dashboard of my server in red and error is "the service does not work properly.

  2. If I try to put the server in maintenance mode, status is changed to "pending maintenance mode" and nothing happens at all. Server to remain in this State forever.

  I tried with two servers, Windows Server 2008 R2 and Windows 2003 Server R2. Both the same problem. I can't get another clue what is the problem.

  NIC is E1000, static IP and 'LSI Logic parallel' as a SCSI controller

  What can I do?

  Thanks for all replies.

  Change the role of the administrator of your view (or whatever the account that is used to manage the server transfer has role) on vCenter and put a tick in the box for Global-manage custom attributes.

  This fixed our environment, the index was in this error message on the display connection server.

  The error messages in the view ' 21: 51:50, ERROR 734 [ServiceConnection25] error when adding custom fields: [transfer Server Status, lock VM status] for type MB: VirtualMachine com.vmware.vdi.vcsupport25.ServiceConnection25. » addCustomFieldNames(SourceFile:1591)
  AxisFault
  faultCode: ServerFaultCode
  faultSubcode:
  "faultString: permission to perform this operation was denied."

  Aaron surfboard