The pen button

So I know that this has been reported up to a few times, but I didn't know the real answers, so what is anyone able to actually use the stylus button without touching the screen, I ordered two pens from different suppliers, work on the screen very well, but I get no response from the key on, I changed the batteries and advice and the same results If anyone has any ideas in more another chance at random with the purchase of another new pen?

The button does nothing but simulate a long press when you tap the screen while pushing. And that only works on the home screen.

Tags: ThinkPad Tablets

Similar Questions

  • M200: Customize the pen buttons

    I can't seem to find a way to customize the buttons 4 stylus on the M200 tablet so that they can operate the shortcuts that I choose. The buttons, to which I refer are on the right side of the screen.

    This feature is available? I can't find in Tablet and pen settings?

    Thank you.

    Hello

    AFAIK the button of the pen software is responsible for the evolution of the button settings. This tool, you can find in the folder utilities Toshiba.

    Good bye

  • How to restore missing "show the menu button" in Windows live mail?

    I want to use the bar hidden in Windows live mail, but the "Show menu bar" button is missing.  It should be between the stylus buttons and helps, but isn't. In fact the pen button is also absent, but the help button is there.

    Pressing alt quite appear the letters fhsov and the numbers 12345, but they don't do anything when I click on them.

    Did you know that there is a forum for Windows Live Mail (WLM)? That is, WLM experts hang out and says a better probability to get an answer, so there it.

    Post your question in this forum:

    Forum WLM
    http://www.windowslivehelp.com/forums.aspx?ProductID=15

    For all Windows Live products, visit the Windows Live Solution Center MRI!

  • Portege M400: click right button on the pen does not work

    Hello

    I can't button right-click on the barrel of the pen to work with my new Portege M400 tablet PC. I tried with the option 'Use the stylus buton click-right' in the 'Pen settings' tab 'settings in Tablet and stylus' dialog checked and unchecked, but none worked.

    Is the stylus defective, or worse still the computer? Or can anyone suggest how to operate?

    Thank you

    Toby

    PS: "pen" should be "nep" reversed in option, tab and dialog names above, but the silent filter profanity does not accept the word "nep" (reverse).

    Hello

    You have this problem since the first day? Please remember that the pen is not in a very long distance from the screen. As you know if the distance is too great the pen will not work as usual.

  • I have a HP Deskjet D4160 printer. The reset button will Flash. Diagnosis HP said there was a "breakdown of pen", but he didn't give any directions on how to fix it.

    Original title: breakdown of pen deskjest d4160

    I have a HP Deskjet D4160 printer. The reset button will Flash.  When I ran the HP diagnostic he said there was a 'pen failure' that had to be fixed, but he didn't give any directions on how to fix it.

    Hi Fred Cornell,.

    ·         You have any problems with the performance of the printer?

    ·         What operating system is installed on your computer?

    ·         The printer works well before?

    You can check the link mentioned on official website of HP that describes the problem for the specific printer model you are using.

    Flashing lights in the HP Deskjet D4160 printer

    http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00635074&cc=us&DLC=en&LC=en&product=501857#n129

    Alternatively, you can contact HP support for help on the issue.

    HP support

    http://WWW8.HP.com/us/en/support-drivers.html

    Let us know the results.

  • pen with the right button

    When I take the right-click/barrel-Elitepad 900 stylus button while clicking on the screen, it registers only as a standard left click.  In fact, I find no way to even check the barrel-button works.  I use it correctly?

    The stylus now seems (slightly) works correctly.  I don't know if it was the update of the firmware, or that I just realized it's very, very slow to respond.  If I deliberately pen tip firmly against the screen for a few seconds, the stylus (pen Executive HP) wakes up.  It seems to go to sleep again after a very short time.  Now if I do that first and then press and hold the barrel again before pressing the screen once more, it records the right-click correctly.

    I have to say it's the slower pen, that I never used.  I've owned two tablet PC (a Lenovo and HP one) I used frequently to annotate pdf documents. This pen is so slow that it is impossible to write with it, even if I try to write very slowly.  Unfortunately, I see now that there are a lot of other similar complaints, so it doesn't seem to be an issue with my pen Executive Elitepad/HP.

  • When you use the pen tool when I click and create an anchor point and release the mouse button the pen tool emerges from the anchor and allow me to go and select a new anchor point. The right pen tool keeps adding lines that I move the mouse.

    When you use the pen tool when I click and create an anchor point and release the mouse button the pen tool emerges from the anchor and allow me to go and select a new anchor point. The right pen tool keeps adding lines that I move the mouse.  How can I get the pen tool to release the anchor

    Try this.go in the menus. Select cc illustrator > preferences > display selection & anchor > then make sure the box "activate the rubber band for" the pen tool is not selected. Then press OK. It should work.

  • The button mask dimmed when the pen tool selected?

    Hello...

    I'll follow a tutorial on how to use the pen tool.

    The tut shows that I should be able to click the button mask to create a trans BG. However, mine is grayed out. I can't find a reason why this would be. I am able to use the layer mask in other circumstances.

    (The tut to take me a picture to draw around the image on practice of pulling/slide, twist, adding handles and so forth).

    I have the pen tool on the way, but the mask becomes not available in one of the options.

    The tut said to click on Ctrl + click on the path, and then click the button mask.

    Any ideas why the mask is gray?

    As always ~ I really appreciate your help.

    Hope you are having a great day/night

    You must convert the background layer to a regular layer by double clicking on the thumbnail of the layer in the layers panel.

    Press OK in the dialog box that follows.

    To convert the active path into a selection, press Ctrl + Enter (or right click in the path and choose to make selection), and then press the button layer mask on the bottom of the layers panel.

  • of the stylus button?

    What is the function of the button on the pen? I can't do anything...

    By using the stylus and tap are the same as tap and hold * when it works...

  • has the pen tool Photoshop cs5

    I have suffered with elements 7 what is the best product of photoshop

    to buy that contains the tool pen.

    I do not know if CS5 features of a specific pen tool.

    You can get excellent help on the link below.

    http://forums.Adobe.com/index.jspa?promoid=JOPCT

    I am a member of the Adobe forums and help has always been good.

    I have items 6 and 10, and there is a tool of the stylus pressure.

    Once the editor is open and the Brush tool is selected, click on the small arrow beside the brushmark.

    In the menu you will find the pen pressure.

    You can also click with the right button on the Brush tool and click on the pencil tool.

    You may know this, but if you do not I hope it helps.

    fyip

  • How can I change the stylus button

    I have a Bosto Kingtee Tablet and it uses the default windows pen and tap Settings. How I would make the button preform ctrl + function of z or something like that?

    Hello

    You can customize the shortcuts to perform actions that you use often. To effectively use the pen, visit the help article and if it helps.

    Customize shortcuts

    http://Windows.Microsoft.com/en-in/Windows7/customize-flicks

    Get more out of your Tablet PC

    http://Windows.Microsoft.com/en-in/Windows7/getting-more-out-of-your-Tablet-PC

    Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

  • ~1/2 background"of the screen is unresponsive to the pen

    If the bottom of my screen does not respond to my pen, but it is to the touch. I recalibrated entries times touchscreen and stylus, but nothing seems to work. I moved the taskbar on top, and when I take notes with OneNote, when I get down about where would be the taskbar and the straight draw down, it actually starts going perfectly horizontal to the right. I have all the problems of drawing by touch at the bottom of the screen, it really seems to be a matter of stylus. I also JUST replace the battery for the pen yesterday. When the taskbar are low, my pen will recognize not all apps that are pinned there, and I can't hit the Windows button (start?) with her either. As I said, I can with my hand. Is it possible to fix this? Thanks for the help!

    Hello

    Sounds like the hardware, the stylus or the screen so check with the support for people.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Problems with the pen of the Surface Pro 3 in Photoshop CS6

    I used photoshop CS6 without any problem on my old computer that was connected to a graphics tablet.

    However, I recently bought a new computer windows called Surface Pro 3. Everything works perfectly with the trackpad and touch, but I had some problems with the pen of Surface.

    The feather can if support on the Web, but every time I click on something on any windows with the pen, the whole application hangs and I have to click on the task bar of the computer down to unlock the application.

    It is impossible to work like this. Is there a solution for this problem? It is said that the version of photoshop I have is Adobe Photoshop Version: 13.1.2

    If you have Photoshop CS6 version 13.1.2, which is the version of subscription to Photoshop, you shoule Isstall Photoshop CC 2014 on your surface Pro 3.  It will work smoothly on the surface Pro 3 and you will also have the option have to use Photoshop CC 2014 preference 2 x UI to Photoshop UI scaling upward in size on your Surface Pro 3.

    If you have not a subscription perpetual windows CS6 version should be version 13.0.1.3.  In this case the only way to scale Photoshop UI must have windows do. You need to update your registry windows 8.1 database and add an external Photoshop manifest file in your folder of Photoshop CS6.  For Surface Pro 3 pen to work with Photoshop, you must install the device drivers for the NTig the wintab API support pen.

    You will not be able to use Photoshop without a keyboard appear on the windows screen keyboard is too heavy.  You can use a utility like button to create keys to touch Overlay on Photoshop and use Photoshop without keyboard.

    Betweek 2XUI Adobe scaled areas an ise windows resizing windows scaling of the image of scalet differece as well as the Photoshops UI

    A couple of key overlat keyboards may look like this

  • The pen tool and Pathfinder problems

    Help... I'm trying to follow a tutorial create a vector image (first time) I use the pen tool to draw the curve in a an elipse shape then split as a Scout, but it adds an extra line when I hit the button the last thing the first pathfinder and fills my way instead of staying as a line that I can remove the form... anyone help please.

    Are you sure that it does not fill when you draw with the pen tool?

  • Cannot complete the trajectory of the pen tool! Help. He fills out the way. NOT inside. ):

    Then, when I do a toolpath pen, like a box or something with it. When I right click and press "Way of filling", it does NOT have inside the box, it fills all outside. And Ctrl + Shift + I didn't do nothing, which doesn't help if im making a selection. How can I reverse this problem of pen tool? I really need help with that some projects im working on force me to use the pen tool

    Ah, now we see the thumbnail of the path that the Act of creating the path must be there that the rub...  Note that with my example, the small part closed is white on a dark background, while yours is dark on a lighter background.

    Once you have the pen tool selected, small buttons at the top of the main window of Photoshop do you have supported on?

    I bet that you have pressed the subtraction of path button.

    Try pressing the button Add to the path instead.

    Edit: MTSTUNER beat me to it.

    -Christmas

Maybe you are looking for