the phone rings do not
My 5s iPhone isn't ringing often. Do not know why. How can I fix it?
Hello
You may have configured mode don't bother to run on a regular basis (if if this repeats every day until this that scheduled is disabled):
- Settings > do not disturb.
Tags: iPhone
Similar Questions
-
The phone rings does not for incoming calls! / spa2101 connected to the router
Hey guys,.
I had this problem for 2 weeks now, my outgoing calls are fine but with the receipt of custom just phone sounds sometimes. He usually works once I restarted the adapter, then after an hour on the phone used ring when I test it.
I opened the ports on my router (5060-5061) and the firewall is disabled.
BTW: I have this software called xlite and when I tried to call for that, it worked fine but the phone did not respond. im guessing theres some configurations that must be accomplished, but what is the question =)
Thank you for any response
Hello
You must change in the line-1/2 tab:
NAT mapping enable: don't-online Yes
NAT keep alive enable: don't-online Yes
Then, you can control the interval keepalive on SIP tab:
NAT Keep Alive Intvl:
(def = 15) -
BlackBerry Smartphones Missing calls - the phone rings do not
Sometimes my phone acts as if it were the silent mode: a call comes in and I can see it on the screen, but it does not have a ringing sound. The very next call sounds great, even if it is the same person who called when the phone was silent. The sound settings are set to 'Normal '. The tech at the local store guys are confused.
Any ideas why this happens?
Thank you very much!
I had this problem too, and the only solution was to reboot the phone and then remove the battery. I brought back to the cell shop where I got it; they had placed the phone software updated and location of PRL, they even tried wiping the own phone electronically.
It was an intermittent problem, so I had to constantly check to see if the ringer would work. If the cell store eventually brought down and replaced by a new. Now I think it works very well. Touch wood.
Gillis
-
Teredo tunneling adapter error: Code 10
I have a wireless modem in my house. When the phone rings it temporarily blocks access to internet on my laptop. I ran "Troubleshooting" and he said the teredo tunneling adapter microsoft has a driver problem (code 10) and I have to click "Reinstall driver" I did. But it will not re - install. I'm not too irritable. Can help you.
In addition, I don't know if there is a related problem, but my laptop takes a long time to communicate with the printer. The doc will be in Quebec but does not print.
Thank you.
Hi LindaGreenwood,
1. what operating system is installed on the computer?
2. you have made no changes to the computer before the broadcast took place?Generated 10 error code when Device Manager does not have enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104I suggest you uninstall the drivers completely uninstall and then reinstall the drivers from the manufacturers Web site.
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly -
Whenever the phone rings my internet cut why?
Whenever the phone rings my internet cut why?
Hello
What operating system do you use?
You will need to go into your options of modems and to disable call waiting. To do this, your modem will dial a specific code before dialing your ISP. There are some common codes in the drop-down list that you can try. If none of them does not work, you will need to contact your phone company and ask them the code. You will then need to manually enter the code before the number you are calling your Internet service provider. We have listed the steps below for setting this up and have also provided a link to a Microsoft Help article on dial-up connections. The information you are looking for is in the article: general tab
· Click the Start button, and then click Control Panel
Click hardware and soundand then click on Options of modems and.
· Place a check next to the to disable call waiting, dial: option on the general tab, and then select * 70 , 1170 , or # 70 in the drop-down list, or type in the sequence number which requires that telephone service to disable call waiting.
· Click OK to accept the call waiting news.
· Click OK to close the modems Options window and
Options of modems and: setting up dialing locations
This should prevent you from disconnection to the internet of an incoming call.
-
Recently introduced an iPhone out of someone and the access code is still and I do not know Apple ID them and I can not get on the phone and do not have access to a computer so what do I do?
You must contact the seller and ask him to remove this iPhone in the devices list. Otherwise, your iPhone will be a useless brick.
Find my iPhone Activation Lock: a mechanism of extraction of the previous owner - Apple Support
-
We have 2 phones and 2 computers and they all sound when the phone rings. How to change that? they all use the same apple - ID we buy apps and music coming from the same account. It all works very well, but we don t like any other device to RING eveytime a phone rings.
Thank you so much: D
ON both phones, check the settings > phone > call on other devices > Off.
-
RESET INTERNET PROTOCOL
I'm following a convenience store from apple that I get this message:"The phone"iphone"could not be restored. An unknown error occurred (6).
When I try to restore/sync my iphone to my itunes (first time I did it because it's a new phone - not new so I have no guarantee Apple).
I have no problems with the internet, only the problem of the iphone/itunes. Reset the internet protocol allows, as says apple? It is not sensible, but if I decide to do, it will cause me problems internet, if in fact it wasn't the question in the first place?
Thank you
Hello CorZT
Windows answers is not the appropriate forum for your question about Apple products. For the systematized with Apple and its products, please visit the link below. -
How to shut up or disable the phone ringing on my all in one single c410a?
How to shut up or disable the phone ringing on my all in one single c410a? Already there is a phone in the room. How can I disable it?
Hello
On the printer Panel, click the Setup program () button.
Press the arrow down until Adjustment of Fax base appears on the screen, and then click OK.
Press the arrow down until the Volume of sounds Fax is displayed on the screen, and then click OK.
Adjust the Volume as Off, and then click OK to apply the changes.
Kind regards
Shlomi
-
I use a Logitech headset.
Hi Alina,
Given that the problem persists only when connecting headphones to the phone system. I recommend you contact their support for better assistance.
http://www.CounterPath.com/support.html
Hope this information helps.
-
After update, the phone rings
Eventually gave at the request of update and now my phone doesn't ring when it is locked. Telephone calls and messages is no good unless the phone is awake. If it goes to automatic locking with a black phone screen calls go directly to voicemail. What is the solution?
You see a Crescent Moon at the top of the screen icon? If yes go to: settings - do not disturb = Off
-
BlackBerry 10 how cut you the keyboard but the phone rings again.
I'm trying to find how to disable the keyboard on the Z30 without inhibition to ring throughout the world through the phone. i.e. keyboard is on mute, but the phone still rings when set to normal mode.
Someone at - there any feedback on how to do it?
Thanks for your help! But frankly if it is the only available way to do this so that it is not enough.
-
When I call my cell phone, why does go to voicemail instead of the phone ring
Why, when I try to call my cell phone, it goes directly to my voicemail and ask me a password? Why doesn't the phone call? Someone knows how to solve this problem, send me an E-Mail to * email deleted *.
[Mod edit: Please include any personal and private information in a public post.] [Thanks!]
I have the same problem. May not sound my Skype mobile.
-
Original title: usb with smart phone problem
When I plug my galaxy s captivate phone into the usb port on my computer, it will charge the phone but I cannot share the news from computer to phone. In fact when I click on the computer icon, it shows the dvd, floppy disks and hard disk but not the phone. I use a mouse usb and headphones and they work fine. I tried to search for devices and it does not work. I run Defender pro anti-virus software and have checked the firewall, but I don't see that his block the phone. I don't know what else to do. Help, please. Thank you
Hi Mike,.
Just to follow up with you on that, that very well may be the cause. Especially when it comes to mobile phones, the real cable you use is very important to have all the features when it is plugged into a computer. Where you can try a new USB cable yet, I hope that whoever is completely compatible with this phone. -
For months, Windows Media Player recognized my Samsung Galaxy SIII without problem. For weeks now, however, he is not picking it up. My computer detects the device when I plug it in, and made my phone. But when I try to sync the music on my phone, Windows Media Player says that I don't have a device so sync is not an option. In addition, there is no option in advanced settings on the Synchronize tab, so I have no idea how to solve the problem. Manual and automatic synchronization does not work.
Hello, Olivia,.
Thank you for keeping us posted.
Even if the phone is recognized on the computer, sometimes bad or corrupted SD/flash card card can cause this kind of scenario on Windows Media Player. Try to disconnect the SD card and check if the Player sync with the phone. Also check if another device appears under the list of devices in Windows Media Player. For troubleshooting, you can also uninstall the software of the phone (Samsung kies) and reinstall them.
Please let us know if the problem still persists.
Maybe you are looking for
-
How to hide native iOS applications?
I realized I can't hide applications native iOS 10, but I don't know how to restore them. How to recover this apps for re-use? Thanks to you all
-
I can't add a security feature in Firefox 27.
When I fill in the dialog box for a new device and click Ok, it does absolutely nothing.
-
HP solution center application for psc1610xi
I reinstalled the drivers and software for psc 1610xi but I do not have the app Center ground to operate the scanner of HP laptop. Vista operating system. Scanner works from the button on the device. Down load seems to include the driver and the soft
-
Impossible to uninstall Microsoft shared computer toolkit to install sp3
Windows XP Pro 32-bit, SP2 Tried to install sp3 discovered that I had to remove Microsoft shared computer toolkit then had "There is a problem with this Windows package install." A script required for this install to complete could not be run. Contac
-
Recently changed the ink cartridges and feel ok. Now it says error 3-paper is stuck, but I don't see anything.