the pictures do not show in windows Explorer 8 despite recipies Support Engineer Karena R.

Similar Questions

• The NEC uf000x diskette device is showing to work correctly. However, it does not show in windows Explorer. I can't read any disks or even format.

  The NEC uf000x diskette device is showing to work correctly. However, it does not show in windows Explorer. I can't read any disks or even

  format. What is my next step

  Check Device Manager to see if it appears.  You may need to install a driver for it.  If so, you should be able to get from the NEC web site.

  Good luck.

• I get e-mail with pictures, but the pictures do not show I get a gray box

  I get e-mails with pictures but the pictures do not show that only receive a box grey.

  What should I do to get photos with photo comments?

  Hello

  1 are you faced with the question in the client program, e-mail or webmail?
  2 are you facing issue with a particular Email or all emails containing photos?

  Please follow the link:

  Images are not displayed and a red X may appear on Web sites in Internet Explorer:
  http://support.Microsoft.com/kb/283807

  I hope this helps.

• Windows displays the device works correctly. However, the device does not appear in windows Explorer. also, I can not format disks.

  Windows displays the device works correctly.  However, the device does not appear in windows Explorer. also, I can not format disks.

  What should I do next

  Hello

  1. Are you referring to the NEC USB Floppy Driver?
  2. You try to format floppy disks?
  3. Was - this earlier work, if so, did the chnages on the computer before this problem?

  If it worked, I suggest the following methods and check the status of the issue.

  Method 1:

  Open the hardware and devices troubleshooter.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• WD MyBook 1 TB recognized, "working properly" shown on workstation, but do not show in Windows Explorer

  I have a HP Elite running Windows 7 (SP1) Intel Quad and 8 GB of Ram. I connected a WD MyBook 1 TB drive that was connected to my dish system to record programs. I plugged in my system using both the USB and IEEE1394 ports with the same effect. He reconnizes the drive, says it works correctly and shows the drivers are up to date, but it does not appear in Windows Explorer. Reboots have no effect. Says it works, shows on the system in my computer, but not workee.

  Tell you in Computor its devices listed under removable...?

  Is it detected in managing disks and an assigned drive letter?

• the records do not show up in Explorer but can be found in research

  There is little time I had an accident and several of my actions have been screwed up.  I thought that all used windows Explorer to recreate my folders.  The I discovered that I have files that are not in windows Explorer, almost as if they don't exist.  I tried to verify that the system folders were visible, as well as hidden and system files but still no record.  I thought that I had lost several things but still records are always used and updated they just are not displayed.  Strange that they do not appear in the command either with a dir command line.  However, I can do a search and find files.  It seems that the fat tables or registration to the directory are corrupted, but I am at a loss, what is the problem or how to fix it.

  Windows XP Home Edition, SP3

  Any ideas...

  on a different thread, certain it was discovered that the "ask toolbar" has the ability to hide folders on the hard disk.

  have you ever installed something 'ask.com '?

  If so, then go to add / remove programs and remove it.

• the pictures do not show in photo-libraries in win 7 pro...?

  Have you tried switching on the "Show thumbnails", but does still not... only in "my pictures"... ?

  IiThank you all for your suggestions.  They do not work so I deleted windows live photo gallary inc and then reinstalled them all again and then all photos have shown under open as folders.  Probably because I run also dropbox and adobe photoshop Starter 3.2 and Arcsoft to answer the phones and different cameras still wofking!

• the pictures do not show correctly

  Thumbnails of photo files

  When you open a photo file, the thumbnails are visible for a second, and then they are converted into icons. This happened after I downloaded a new version of Magic Photo Story on CD and DVD. The old version worked well. I followed all the advice, but the same results. I also removed story 10.

  Follow the steps in the Web site

  http://www.ehow.com/how_7351596_picture-show-up-Vista-folder.html

• Toshiba Canvio 3.0 base 1 TB Portable drive not detected in Windows Explorer

  Original title: device

  I just installed a brand new Toshiba Canvio 3.0 Baic 1 TB Portable Drive on my system (HP Media Center PC m8327c), running Windows 7 SP1.  The drive does not appear in Windows Explorer or any other file manager.  In does not show in my START/computer.  However when I run Windows System Information is that there are listed in the components/storage/disks, but do not appear in the components/storage/drives.  He also has not received a drive letter.

  Hello

  I followed the instructions, I received last week and was able to finally see my new Toshiba CANvio drive in WINDOWS Explorer.  EVERYTHING since then seems to be OK.

  I went to devices and printers , and has been able to assign a letter to the reader.

  Hello

  I suggest you to visit:

  My drive does not appear in Windows Explorer

  http://support.Microsoft.com/kb/330140

  Warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  WARNING: If you are not sure that you can safely follow the steps, contact your hardware documentation or contact the manufacturer of the computer or the hard drive before you continue.

• Pictures transferred to the iphone do not show in the PC

  IPhone 4s:

  IOS 9.2

  PC OS win 7

  ICloud: No.

  Other services to store pictures or images of cloud: No.

  Are physically stored pictures on the Iphone: Yes

  I copied photos of android in a folder on my PC. I opened Itunes and sync the folder on the PC so all the pictures and videos where he is transferred to the Iphone.

  I can see the photo album on the iphone, I can check my photos and videos.

  BUT, when I connect the iphone to the computer and find the folder "Apple iPhone\Internal Storage\DCIM\100APPLE" no pictures are there. ONLY the photos I took with the iphone appears. Not my other 2800 photos.

  What is wrong and how to fix it?

  That is how it is designed to work. An iTunes syncing of photos from a computer to an iPhone is a one-way transfer, and the pictures are not stored in a location accessible from Windows Explorer on the computer. The original photos must be kept on the PC - if they are not, any future synchronization of photos will remove the copy that is on the iPhone. If you delete photos from the computer and you want to recover the iPhone, you need to use 3rd party software like https://www.wideanglesoftware.com/touchcopy/

• I want to display the Nikon D7000 .nef files in Windows Explorer/widows Webcam live picture and use some ice with them in Windows Vista.

  I want to display the Nikon D7000 .nef files in Windows Explorer/widows Webcam live picture and use some ice with them in Windows Vista. I think that Microsoft's current camera raw codec not support.nef files from Nikon D7000. Furthermore, I would also like to use Adobe .dng files in files. VISTA has native free codecs for the same. Please season a solution?

  original title: Micorsoft Camera Raw Codec

  As far as I lnow... the following codec pack is
  the most current available from Microsoft.

  Microsoft Camera Codec Pack
  http://www.Microsoft.com/download/en/details.aspx?ID=26829
  (Windows 7, Windows Vista Service Pack 2)
  This package will allow RAW supported
  camera files visible in Windows Explorer

  The following retail software is not Microsoft
  but maybe worth a visit:

  FastPictureViewer Codec Pack
  http://www.FastPictureViewer.com/codecs/

• Hi, I'm trying to put a song as my ringtone but I can't find the option "show in finder". Instead, it's show "show in windows Explorer..." Help, please... :( I use iphone with ios 5 9...

  Hi, I'm trying to put a song as my ringtone but I can't find the option "show in finder". Instead, it's show "show in windows Explorer..." Help, please... I use the latest version of itunes on windows 12.3 8...

  You won't show in Finder on Windows option. Use the one you have - display in Windows Exploler.

• What is the title of the NOTE column in Windows Explorer?

  What is the title of the NOTE column in Windows Explorer?
  Am using Vista Home Premium, I understand that there are 6 models folder in Vista Type; photography and videos and music details templates have the column nominal position, (1) what is it for, (2) can I use it for photos of rates or documents, if so how?

  Hi 5466,

  Thanks for your replies.

  Vista has characteristics of property for files in folders that you might be able to carry out some sort of system that allows you to know your staff for the file that you place in the folder.

  There isn't a download from Microsoft which has the attribute that you speak of to allow the classification of Word documents.  Information online about this process does not specifically address the attribute you have written in to place the dimension on the record.

  Here is a possible work around you

  When you view them documents in the folder, they are placed, check Details of the menu view is marked.

  Then in the file that is created, right click and select Properties, in the TAG field type a general comment as '5 stars' or one who would submit to you the rating desired - in this field of the Details tab of the properties as Judd had suggested in a previous post.   You can use this field to record the files you have chosen personally.

  Of course it's all a work around, but please let us know if this helps you.

  Kind regards

  Debbie
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Combo DVD/CD drive does not appear in Windows Explorer or the Device Manager

  The combo DVD/CD on my laptop drive isn't in Device Manager or Windows Explorer.  The door is not ejected.  You must use a paperclip, poking into the hole to open it.  I also re - it sitting, but it changed nothing.  We had this laptop for 1.5 years and the disk worked great until yesterday when trying to install Starcraft II.  Installation failed and it has messed up also the DVD/CD drive.

  We read some other difficulty advice and tried the upper and lower filters in the registry, but there was no entires of upper and lower filters in the key.

  The specifications of the laptop are:

  HP Pavilion dv7

  Processor Dual-Core Mobile RM-72 2.10 GHz AMD Turion X 2

  4 GB OF RAM

  64-bit Windows Vista

  Hello

  Check with HP Support, their online documentation and drivers, and their known forums
  questions.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• External hard disks do not appear in Windows Explorer

  I have Win 7 SP1 64 bit Home Premium. Recently, four external drives are not recognized in Windows Explorer, but show in disk device manager &. They all work well and are recognized in another PC. I have tried different methods to solve the problem without success. I unplugged all the USB ports and the power supply for the discs off the PC. After a reboot, one by one, I turned on the readers and attached to their USB cable. Plug & Play worked well and I could open the files in the first drive. The player showed in disk management, the Manager of devices and Windows.  As soon as I installed the second disc, one disappeared from the Windows folder but remained in Mgt of disc and Device Manager. It's the same thing when I installed the readers of 2nd, 3rd and 4th... After the shutdown of the PC and turn it back on, none of the drives show in Windows, but has shown in managing disks and Device Manager.

  I also tried Mr. Fixit. I uninstalled all the USB controllers. I activated turn on AutoPlay. Nothing has solved the problem! If she can be of any consequence or relevant to this problem, the internal drive in my PC now has been cloned from a smaller drive about a month ago. Any help to solve this frustrating problem would be greatly appreciated.

  Thanks, Dave

  Vignesh Hello,

  Thanks for the reply.

  I'm sorry for the late reply.

  I suggest you try the following steps and check if it helps.

  Remove the external hard drive of the computer.

  b. Click Start, type regedit in the start search box, and click regedit in the list programs.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  (c) in the navigation pane, search for, and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E967-E325-11CE-BFC1-08002BE10318}

  d. in the pane of details, right click 'LowerFilters' and then click 'remove '.

  e. click 'Yes' when prompted.

  f. close the registry editor and restart the computer.

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  I hope this helps.

  Thank you