The plug-and-play USB mouse will not work on Satellite A100

Hello

I have a laptop Satellite A100 laptop and when I try to install a plug and play mouse windows says it is not recognized - unknown device.

Please help the mouse works.

Thank you very much

Hello Jayne

It will be really interesting to know where you're trying to connect the USB mouse. Can you send description of mouse models please?

As I know it is not necessary to install a driver for external USB mouse and mouse is usually recognized automatically. Please check if a driver installation is needed, and even request delivered must be preinstalled.

Tags: Toshiba

Similar Questions

  • Charger C - USB plug-and - adapter USB - C will not fully inserted

    We can insert is more completely the plug of charger USB - C OR USB - C adapter (USB - C, USB - A and HDMI).  They stopped short about 1-1, 5 mm.  Food is always delivered, but a very small movement can cause the power disconnected, even if most is still mainly in.  Data connections may be lost in the same way with potentially catastrophic effects.

    Is this a warranty issue?  It's rather disturbing if USB - C plugs/Sockets can fail if relatively fast especially in this case it's an all-Apple above adapters line and computer.

    Yes, usb ports a and c have a very known issue that no one is really writing.

    Is waved from time to time, the connections inside stops working. Also, I tested the adapter, you speak of and it heats more than all of the time and some time. Sometimes if give you him just an hour or two break and then it goes back to normal. His strange indeed.

    Also, I recommend the update to 10.11.3. There has been many corrections of bugs.

  • The devices plug-and-play USB do not install on XP pro sp3 that new hardware wizard cannot find the software.

    Running XP PRO with SP3 and the latest updates as of 12/14/10.

    Both a logitech M570 wireless receiver USB trackball and cause a cooler hub from the usb port 4 master the new wizard material to search for drivers but ultimately are not found.  Neither disks driver with devices or of are available on the Web sites of the companies.

    I also encountered the same problem with a new sandisk sansa mp3 player recently. It was recognized instantly on another computer running Vista.

    However, I have an eternal hardrive of WD and a recognized on my laptop XP Trendnet USB wireless adapter. In my view, that all have two drivers I installed earlier however.

    In the end, I believe not to be able to use the Plug-and-Play devices despite them being listed as compatible with XP.

    I removed the devices, restarted, nothing helps. Unknown poster USB 2.0 Device Manager hub and 2 other unknown devices.  I uninstalled the unknown devices in Device Manager and do it again, but no change.

    Don't know what other information I should include. Any help please, I'm at a loss what to tackle next.

    Hi pennybrown,

    Follow the steps below and check, if it helps:

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    How to back up and restore the registry in Windows:http://support.microsoft.com/kb/322756

    To create a new registry entry that disables the selective suspend of the USB hub driver feature, follow these steps:

    a. Click Start, click Run, type regedit and then click OK.

    b. Locate and then click the following key in the registry: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\USB

    c. on the Edit menu, point to new, and then click DWORD.

    d. type DisableSelectiveSuspend, and then press ENTER.

    e. in the Edit menu, click on change.

    f. type 1 and then click OK.

    Note: This setting affects all USB host controller drivers in the system.

    If the DisableSelectiveSuspend registry entry value is set to 1, the selective suspend feature is disabled. In addition, allow the computer to enable this device to save power power off the checkbox does not appear under the tab for the USB root hub power management.

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • While the plug-and-play was still there at all, and I tried to go I still receive error message 2. could not locate the file.

    Here's the situation.

    First of all only started to the top of my Asus to find was no sound. Following up to plug-and-play service has not started. It is now removed apparently.

    Here are the solutions I tried, in and out of safe mode:

    While the plug-and-play was still there at all, and I tried to go I still receive error message 2. could not locate the file.

    In CMD sfc/scannow reached 32%, then breaks down, saying: it finds corrupted files, but could not fix.

    It Startin via msconfig did not work.

    Tried to go through Device Manager, which is completely empty for some reason any.

    System Restore is restoring before this problem. When you attempt a restore, plug-and-play service is not returned to the existence, defective or otherwise.

    I knew, but there may be malware, mutiple scans with several services did not find anything.

    I tried to contact microsoft help and they might suggest only I have upgraded to windows 10. Tried several times, and he has failed to be upgraded, every time. For the most part just download windows 10 and then by restarting the computer as if nothing happened. Any ideas on how I can fix this?

    Hello

    Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing.

    I would like to ask you:

    • You are running Windows 7 or Windows 10 on your PC?
    • When was the last time it was working fine? Remember to make changes to the computer before this problem?

    Given that you are unable to complete the scan of SFC and Task Manager is empty, usually reinstall or do a repair install is the best choice of action. However, we can try to fix these files and check if that helps. To do this, refer to the steps below:

    1. Open the start menu and type "cmd".
    2. Right-click on the command prompt and click "run as administrator".
    3. Type the following commands and press ENTER after each.

    DISM.exe / Online/Cleanup-image /Scanhealth

    DISM.exe / Online/Cleanup-image /Restorehealth

    After you run these commands, restart the system and check.

    You can also view,

    Difficulty errors of corruption of Windows by using the DISM tool / System Update Readiness

    https://support.Microsoft.com/en-us/KB/947821

    If you are using Windows 7 and have the product key for this. You try to run an upgrade in Place to fix all the corruptions.

    Refer,

    How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

    Hope this information was useful.

  • Microsoft Teredo Tunneling adapter does not work on my Windows 7 and cannot start. The Plug and Play ID for the device is 12.

    Anyone can guide me please by reinstalling my Microsoft Teredo Tunneling adapter for my Windows 7 operating system?  I ran a diagnosis of the system and says it can not start correctly and has a hardware failure. The Plug and Play ID for the device is 12.  I have problems to install it.

    Hello

    Try these solutions:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/how-do-i-reinstall-Teredo-tunneling-win-7/10ff26a2-fc53-4CDE-AE4C-3cd35f15e2e2

    How do I reinstall Teredo

  • I'm having a problem reinstalling Windows XP. After formatting the disk and create partitions, it will not complete the installation.

    Problem reinstalling Windows XP

    I'm having a problem reinstalling Windows XP.  After formatting the disk and create partitions, it will not complete the installation.  He goes back and reinstall Windows again.  I go through the installation of 39 minutes, the computer restarts to complete and it loops back and start the installation again. Why it does this and what I can do to move beyond this?

    Go into the BIOS and make sure that you your hard drive is not set to off, and that is the first priority boot CD and your second HD.

    Don't push when it restarts anything just to let him do what he does and report back if anything I'm sorry I have no idea.

  • 1 error windows must now restart because the plug-and-play service taken end unexpectedly__error 2 - windows must now restart because the DCOM Server process Launcher service put end unexpectedly__

    1 error windows must now restart because the plug-and-play service terminated unexpectedly
    error 2 - windows must now restart because the DCOM server process Launcher service terminated unexpectedly
    -every half an hour or 45 minutes such error comes and restarting the laptop... How to solve this problem...

    Hi nevil.fidelis,
     
     
    This seems to be a common problem, I recommend you to follow the discussions below and check if it helps.

    You can follow the procedure posted by Bindu RMicrosoft support, Moderator on Sunday, 24 January 2010, at 20:04.
    http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/ea20a793-5fe8-4448-9fa2-c3ef45069b87

    For additional help please refer to the following thread also:
    http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/aa3373fa-836D-43f2-BCFC-6e566553c818

    You can also check the positions of the TCD in the thread below on
    http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/0f1a049c-4852-4321-91d7-dc1255f4d7a4
     
    Consider the response posted by Karena R, Moderator Thursday, December 31, 2009 at 01:28
    http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/aa3373fa-836D-43f2-BCFC-6e566553c818

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • I have installed the latest updates for my Compaq desktop computer and the DVD/CD drive bay door will not work.

    I have installed the latest updates for my Compaq desktop computer and the DVD/CD drive bay door will not work. I can get the led light will stop flashing when I open the door all the way, the machine detects the drive but do not read or close on its own, how can I get this disc surgery? Downloading updates, I installed a software disc, when I ejected the disc, the drive comes of is stopped. The computer still sees the drive, but will not read or even close on its own. I also had been using my computer in mode mute until I tried to increase the volume and now the computer tells me no playback device installed. Device Manager acknowledges the Harmon/Kardon soundsticks connected to it, but nothing does, how it works? The Control Panel also sees the soundsticks, but still when I try to move the volume the computer says there is no playback device installed.

    Hello

    1. do you get any error code or error message?

    2. what day you installed recently?

    It seems to be a problem with the hardware. I suggest you try to uninstall and reinstall the CD/DVD driver and check if it helps.

    Follow the steps to uninstall and re-install the drivers.

    a. click on start toreduce this includes this im and then click Control Panel.

    b. click system and Maintenance, click Systemand then click on Device Manager.
    Note If Control Panel is in Classic view, double-click System, and then click Device Manager.

    Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type the password, or click allow.

    c. in the Manager device, expand CD-ROM/DVD-ROM drives, right click on CD and DVD devices and then click Uninstall.

    d. When you are prompted to confirm that you want to remove the device, click OK.

    e. restart the computer.

    If the methods mentioned above did not help, then it would be best to contact the manufacturer of the computer/CD/DVD player.

    Hope the information is useful.

  • restart Windows, because the plug-and-play service ended unexpectedly

    Windows restart because the plug-and-play service terminated unexpectedly. After that this mesege pc stops.

    Hello

    Check what is causing the problem by following the steps in this link: support.microsoft.com/kb/929135

    Perform the online scan if the problem persists: http://onecare.live.com/site/en-us/default.htm

    James

  • cannot answer the calls when 'asleep '. Swipe will not work, but appeal continues to ring

    cannot answer the calls when 'asleep '. Swipe will not work, but appeal continues to ring

    If you have not already, try to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again. You won't lose any data, but it can cure a few glitches.

    If it does not, and to make sure that this isn't related software, set it back to factory settings, without using any data backup later. Set up the rest of the personal settings manually and test the phone.

    If it still does not respond, it could be a hardware problem and the phone must be repaired by Apple or an Apple authorized Service Provider:

    Use iTunes to restore your device to factory settings - Support Apple iOS

    Find an Apple authorized service provider

    Apple iPhone - contact Support - support

  • Spill coffee on the keyboard and now 3 keys do not work

    I spilled coffee on the keyboard. Now 3 keys do not work. What should do?

    Replace the keyboard.  There is nothing here that can be repaired by a user, and wild stories you see on the Internet about doing things like «put the keyboard in your dishwasher and...» "will not work.

  • black screen and nice white cursor and Ctrl alt del will not work, I can not update shell

    black screen and nice white cursor and Ctrl alt del will not work, I can change the shell to the Explorer, but I can't unload or load the hive, what should I do?

    Hello

    Your question I know that some of these methods is not available now, however, all
    Convenience store is included just in case where win you some access as you try to solve the problem.

    You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
    Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
    on devices and UNINSTALL - REBOOT.

    Another method to try to get to the desktop (try in normal Windows Mode without failure)
    CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
    on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
    by tapping F8 as you start several times.

    First check this thread in case it is simple and if not to come back to this thread.

    http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

    Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
    That there is no information on a black screen as it is on a blue screen just adds to the
    Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
    Google to see the proposed repairs, whom some have worked however these cover a wide
    field efforts.

    Here's a video of one of them.

    http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

    Here's another fix
    http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

    You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
    system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    You can create a recovery disc or use someone even version (making the system restore it)
    must be bootable).

    How to create a Vista recovery disk
    http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

    ------------------------------------------------

    These require the correct Vista discs since you can not start safe mode.

    Try the Startup Repair tool-

    This tells you how to access the System Recovery Options and/or with a Vista disk
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    Try recovery options Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    -----------------------------------------------

    Here are a few Google searches where many have found different solutions:

    Vista black screen - check that a 1st
    http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

    Vista black screen Solution
    http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

    Vista black screen Fix
    http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

    -----------------------------------------------

    If necessary and you can access all ordinary Windows.

    You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
    (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

    You can use another DVD that aren't copy protected but you you need to own
    Product key.

    On-site upgrade
    http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

    If nothing works, you can make a repair facility that must save the data but you will need to
    Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
    need to know your product Code.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

    How to perform a repair for Vista Installation
    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

    ---------------------------------------------------------------------------

    Another method that works sometimes: at the command prompt, type of Vista startup disk:
    (a line type or copy and paste one line at a time and hit enter - enter a bracket)
    or "BOLD")

    c:

    cd\

    CD c:\Windows\System32\winevt (there is a space between cd and C :)

    Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

    RESTART Windows

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Compatibility Application Applications App the sharper image weather station programs will not work on Windows 7

    Compatibility Application Applications App the sharper image weather station programs will not work on Windows 7

    It is the responsibility of the manufacturer of the device to provide device drivers that allow the device works in an operating system. You will need to contact the manufacturer of the device for info and software.

  • How can I get rid of a popup telling me I have a virus Zeus.  It locks my screen and try to "erase the history and data, etc." does not work.

    I need help with a popup that locks the screen of my iPadAir2.  Go to the setting and compensation history/data does not work.

    If you have deleted the historical data and Safari Web site, and nothing is resolved, the problem is on the wireless router. Check your router wireless for possible violations.

  • the keyboard of my dell computer will not work

    the keyboard of my dell computer will not work

    Reference Dell _ (model)?

    Tried other keyboards?

    How to get into BIOS but not once the operating system has started?

Maybe you are looking for