The Portege 7020CT power supply works with the dock?

Similar Questions

• My new power supply work with my motherboard?

  Hello

  I reasontly bourght a few upgrades for my PC.

  I bourght an i7 870 and an AMD 5670 + a new power supply

  So my question, what ive in doubt, my new PSU(CX-500) work with my motherboad (MS-7613(Lona-GL8E)?

  Thanks in advance

  René Tyrsted

  Thank you.

  Yes. It will work.

  However you will probably find a little tight because of remaining unused cable bundles. My preference for the PC ATX Mid-size boxes are of the modular power supply. With a modular power supply connect only s connector as much as you want.

  Do the upgrades one at a time.  Start with the power SUPPLY and any other origin. Check that it works and then close.  Then go to the graphics card.

  Happy update.

  Best regards
  ERICO

• R104 - power supply works, but the dead unit

  Hi I have a Readynas 104 about 2 years and it just stopped working and will not. The power supply shows a green light, suggesting it is fine, but the box itself died. Any ideas how to fix this problem or do I get it looked at under warranty? Also I have a thought to replace it with another more powererful Readynas. If I simply move the disks to the new unit will be able to prepare the raid 5 array, I had the installer on the R104 (4 x 3 TB WD) Red readers

  Models ending in E are provided with readers of the company and those ending in re is bundled with office records.

• With my computer's power supply works

  This power supply http://www.staples.com/Antec-VP-450W-Power-Supply/product_928656 work and fit into my computer, an hp pavilion p7-1026?

  iEpak,

  IMHO, I would not recommend this power supply. It is an entry-level unit, 2 rails and has only 360W on 12v.  The specs do not reflect that it is the energy efficiency rating. It is also 6 "deep in your case.

  Do you have the 1/2 additional "before it would bind the cables from the DVD player?

  In your previous post you questions about the Gigabyte card, and it has been recommended that purchase you an energy efficient 80 + assessment and in the range 500-600 w.

  This Corsair 500W is an exact fit: http://www.newegg.com/Product/Product.aspx?Item=N82E16817139027

• New... computer power supply begins with 20pin but interrupts when 4 pin is connected

  I read through many of these posts and they were very helpful. I'll try to make this short. I have a HP a1118x who gave me the flashing light feared on the power supply after a recent power outage. Rather than view this forum, I assumed that the PSU was wrong and ordered a new. 480 watt Logisys 20 + 4 pins. Put everything back together and it still won't turn. Then I found myself here all by searching for a solution. Following the advice on another post I disconnected, mother card power and plugged the 20pin record while holding down the power button. Yay, it worked... until I connected pin 4 directly behind the pin 20. Each cut off again thing. No power supply, no nothing. I plugged the video monitor in without the 4 pin and a computer but no video. I guess 4 pins may have something to do with the video. Any advice on what it takes to solve problems?

  This page is available to the motherboard: http://support.hp.com/us-en/document/c00257657

  If food had a connector 24 pin for the motherboard, it should also be a connector 4 separate pins that goes on the plug just behind the 20pin connector.  (do not part of the 20pin + 4pin connectors.   Universal power supply have a 4 pins that will separate from the main connector 20/24 pin to fit an old motherboard like yours) Possily got the two mixed up?   It is to power the CPU, separate from the Grill which is part of the main motherboard connector.   Either that or the CPU/motherboard has failed, too.

• Satellite L300D-12u: power supply works not - is threre a guarantee?

  Hello.

  Today, I was surfing the Internet when suddenly my laptop says, is no longer on electricity.
  I touched the power supply and the connector that is immersed in the laptop was very hot (not the big case which becomes usually hot, only the connector).

  I tried several times to make it work again to take a new start or cool connector, but it still does not work.

  To make sure, that it is the question of food, I used the power supply of my mother, who is similar to mine, and then it worked.

  So my question: do I have a warranty on my power supply?
  I bought my laptop to 29.8.2008 in Germany and is a Satellite L300D - 12u.

  Thank you for all the answers!

  Hello

  Adapter is covered by warranty for laptop.
  So if laptops warranty is still valid your adapter should be covered by the warranty as well.

  Visit this link for details of the guarantee:

  http://www.toshiba-tro.de/unitdetails

  Welcome them

• Portege 2000 does not work with SP1 or SP2 & SD card problems

  Hello!
  I have some problems with my Portege 2000.
  1. I had to run Windows XP without Service Packs and updates, because when I install SP1 or SP2 for example, the Portege does not start after that (white screen). The laptop starts only in Mode safe so I can uninstall the Service Pack and it works again. What can I do?

  2. I also have problems with the SD card slot. Host and card drivers are installed properly. I tested it with a 128 MB and 512 MB SD card-> works very well. But readers don't read my 2 GB card. Is the controller too old to work with more than 1 GB card?

  Thanks for the help and sorry for my English :)

  Hello

  1.) Please check the document on the page of the Toshiba driver on the SP2 updates. It seems that you need to update some drivers and tools

  2.) Yes, it seems that the SD controller cannot manage a larger SD card sizes. In this case, you will need to use an external solution.
  Buy a mulitcard reader and connect it to the USB port. This player are cheap one should support several types of cards and sizes

• Power supply problem with HP officejet 4620

  I just bought a Hp Officejet 4620 printer all-in-one. It works fine apart from a problem that is if I turn off the power by pressing on the button on the front of the printer, the power goes off. If I then try to turn on the machine it will not until I unplugged the power cable and then reinsert. I think I should be able to put the printer without having to unplug the power cable from each time I want to use it. Would appreciate any suggestions.

  Hi - I think I have the same problem. At, first once I power off, the light on the back of the printer green power stays on and I turn again on OK. Later, the green light goes off and I have to unplug the power cable and plug it back before works the power button.

  The power supply inside the printer is very loose, and I assumed that the issue was a faulty connection, especially since when I move around the light seems to sometimes get a lot brighter. I just replaced the printer and the power supply in the new looks the same, IE loose, so I replaced it again from a different source in case it is a batch production number. I read in a post "Photosmart 5510: brick of power inside the unit does not move" here which suggests in bulk may be normal.

  I also read on power off and power on demand off, but as I put the wireless printer, these shouldn't have been activated, and in any case, I guess they should affect only the power button and should not require that you disconnect and reconnect the power cable.

• Power supply problem with Dell Inspiron One 2310

  Hello

  I have a problem with my computer Dell 2310, as far as I can see that the power supply burned out or something similar. Blue bright lighting supply cable indicates that power delivery is correct, but the power light on the power button does not respond.

  I suspect that the power supply is blown and needs to be replaced, I hope that a replacement is available on the list of spare parts and hits on how to properly check if my preliminary diagnosis is correct. I see no reason to suspect problems with the other componentts such as motherboard, memory, disk HARD etc.

  Grateful for advice on how to check my diagnose some material.

  Kind regards

  Axel

  Hi Axel,

  Sorry, no one answered. This is a user forum. We organise warranty service. You should contact Dell technical support in your country.

• When you use Windows Live Photo Gallery SCREENSAVER, monitor off, regardless of power parameters. The power settings work with all the other screen savers.

  Windows Live Photo Gallery screensaver does not extinguish whatever my power settings.  This is the case with Windows Live Photo Gallery.  When you use any other screen saver, the screen turns off according to the way in which the power settings are defined.  It is quite frustrating because I prefer to use as my screen saver Windows Live Photo Gallery.  But he will stay indefinitely if I stop it manually.  Someone has any idea how to solve this problem?   Thank you.

  Hi MaynardCrossman

  
  As the issue seems to be specific to Windows Live Photo gallery, you can contact the Windows Live support team. I would recommend posting your query to community specific to Microsoft Windows Live. Please visit the link below to find a community that will provide the support that ask you in the right direction for Windows Live -http://windowslivehelp.com/product.aspx?productid=20

  I hope this helps.

• Downloaded IOS 9.3.1... big mistake!   Now my 4S apple lights.  Only thing shows when it is turned on, the ITunes symbol and the image of the power supply cable with the arrow pointing towards the ITunes symbol. Tried a reset of the 5 - 6 times with the s

  Sorry it is in summary...

  You are in recovery mode. You need to restore your phone via iTunes on your computer. Then you must reload your latest backup.

• Each of these power supply compatible with my HPE - 380 t?

  CORSAIR CX600M 600W

  http://www.Newegg.com/product/product.aspx?item=N82E16817139048

  The Corsair CX600 and compatible with your HPE - 380 t electric TX650, however the CX600 will be a better fit physically.

  Please send BRAVO

• power supply for p6310f

  to model a CX750 Corsair Builder Series ATX 80 PLUS Bronze Certified Power Supply work with my hp p6310f computer I think it's a mid ATX case

  EDTII

  The CX750 is 5.9 "x 3.4" x 6.3 ", while the CX500/CX600 are 5.9" x 3.4 "x 5.5". " In addition, the C750 has extra long cables. This means that the CX750 will adapt but can hinder or interfere with the reader of CD/DVD-ROM of the computer and other items. In addition, with the cables more and longer... There will be less space in the case of air flow and heat dissipates.

  Please send Bravo

• I need help finding a power supply

  I need to find a power supply that is compatible with my Compaq Presario SR5816F

  It must have a minimum flow of 12v @ 18 amps and measured 350 wattts...

  Thank you.

  See my response to your thread later:

  http://h30434.www3.HP.com/T5/desktop-hardware/will-this-power-supply-work-with-my-PC/m-p/4292292#M85120

• Upgrading a p6510f Pavilion with a new power supply, graphics card and RAM work?

  Well, here's the deal that I go back to Japan for about 3 months and during this time I will borrow my laptop Cousins (in Exchange for my office) for Skype etc.. No problem their the thing is that he is a player and this p6510f has a few bad specifications when it comes to this, so I thought that I could let him borrow some cake rather than dirt, if you catch my drift ha... As well, when I get back gamer I ~ ('voice of Yoda"aka How Japanese works...)

  So I looked on Newegg / Amazon read comments and planned my purchase but the question is can this case and the Board of Directors manage what I use? lazy to measure everything out / busy.

  So first thing, I would like to replace:

  Replace the 2 x 2 GB ram cards default with:

  4 x Corsair blue Vengeance 4 GB (2 X 4 GB) 1600 mHz PC3-12800 DDR3 SDRAM of 240 pins

  For a total of ram 16 GB with my x 64 bit PC of course

  Link: http://AMZN.to/KtMt9m (note that I buy two)

  Replacing power 250w with an overkill rather one but it is the same price as a 550w then why not eh? After all the future upgrade/ability to use it in future builds?

  1 x Corsair Enthusiast Series 650 watts 80 Plus Bronze Certified Power Supply Compatible with Intel Core i3, i5, i7 and AMD platforms

  For the graphics card + overclocking.

  Link: http://AMZN.to/IkLTdp 

  Finally no more ATI integrated BS... Please for the love of the creator (will it work?)

  1 x EVGA GeForce GTX 580 1536 MB GDDR5 PCI-Express 2.0 2DVI/Mini-HDMI SLI

  If my PC can adapt to this card, and it works with power above that will make me happy enough. (Regarding the cooling if it becomes a problem, I can upgrade fans me but first comes this material.)

  Link: http://AMZN.to/IFiEa2

  I checked the slot for graphics card, RAM and power supply power and it seems to me that this will work out I want just a professional opinion...

  -----------------------------------------------

  Card not present upgraded

  HP Pavilion p6510f PC / Nr WW639AA #ABA

  Four cores AMD Athlon 630

  4 GB Ram DDR3

  HARD DRIVE 750 GB

  Integrated ATI Radeon graphics card...

  Power Max Power 250W

  Windows 7 Home Premium 64-bit

  -----------------------------------------------

  Thank you! ~ Of Amerindian

  Hello

  According to Corsair, the DIMMs that you chose is detected only at 1600 mhz, which is not in the specifications published by HP.

  You can roll the dice on the DIMMs that you chose, but I wouldn't recommend that buy you them until you contact Corsair and get a confirmation.  Computers HP can be very finicky with DIMMs, especially if you try to mix them with other DIMM modules.  If you do buy these bars and want to be them mixed with the existing DIMMs, then make sure the timings of latency CASE corresponding information validated HP. Also mix DIMM sizes will cause the memory function in unbalanced mode that adversely affect the performance of the memory.

  You should be able to make your own decision on whether to roll the dice.