the power cord of the ac for my iphone charger 6 will work in the USB port in the car for the load
Looking for a car charger for my IPhone 6. Wondering if the cable operator in the House will work in the USB port on a car? It hurt my phone.
Yes you can. As long as you have in the car's USB port. It can load more slowly then wall charger, but it works! I load mine in the car all the time
I'm visiting the United States in a few weeks and I'm looking to buy an iPhone 7 so I'm here, right in saying that it is unlocked, it will work perfectly once I am back in the United Kingdom with my UK SIM card?
Thank you for using communities of Apple Support.
I understand your message you will buy an iPhone Unlocked 7 while in the United States and want to know if there is work, when you return to the United Kingdom. You will need to buy the T-Mobile or AT & T version of the iPhone in the United States, a GSM model, so he could work in the United Kingdom. Additionally, make sure that you buy the version without SIM card, you are free to use a SIM card from any carrier that provides service for iPhone.
got to the iPhone 5 s Canada, can I use the power charger in the USA travel adapter, it says 100-240 volts in small letters, you know the original provided with the iPhone box.
I'm not sure of the Canada and the USA have the same voltage in hotels,
any idea, thanks,
Yes, the unit will work fine.
in the series of M, Toshiba M300 satellite (red), there is a port USB combo and something else, and also another USB port ordinary on the * left * side of the laptop. There is also a USB port on the * right * side.
Currently, for some reason, on my right, the USB port works (in other words, the laptop detects) and my left side, where there are 2 USB ports, it does not work (in other words, it does not detect it) I have no idea how solve this problem.
And what happens if you connect the external USB mouse?
> I have the toshiba recovery of the burned disc, should I use it?
Why not, you can test it with the new operating system preinstalled too.
When I get my laptop connected via usb, the system constantly charge the phone when the pc is asleep. Have you tried to uncheck "allow the computer to turn off this device to save power" in the Control Panel/Device Manager/USB controllers/Properties tab, but the ports still off. I saw my present mobile on this hub have obtained the correct material. I would have preferred that the PC continues to sleep when it is inactive, but want the mobile to continue loading.
Should I change something in the BIOS maybe? If so, how can I access BIOS for this model?
Thank you in advance.
I read your post on how the USB ports on your computer constantly power when the rest of your system enters mode 'sleep', and you need to avoid this. I'd be happy to help you in this case!
In order to maintain your USB ports power while your computer sleeps, your office should be equipped with a High Powered USB port. It also allows to load when your office is completely turned off.
According to the Specifications of the product from your desktop, High Powered USB is not available on your system.
I hope this helps!
I just ordered the Toshiba NB200-10Z of Amazon.co.uk because the model wasn't available everywhere in Finland, despite being listed on the site of Toshiba Finland. It ' probably be only with the style UK power cord & plug-and - my concern is where can I find a power cord appropriate for the unit (with a schuko type plug)? Or are the UK and different EU cords also at the other end where they plug in the power adapter, which is what I need to get a power adapter and a power cord?
Thanks for any information.
I agree with Al - eX. As you can see on the underside of the adapter AC/DC it can handle voltages range from 110 to 240 volts.
You need only a new power cord. Therefore, you can contact the service provider authorized in your country. Maybe you can exchange the cable and if you get one free.
Alternative go to your favorite computer store. Such a cable, you must find there too.
I recently installed a Pioneer AVH-4200NEX unit, I was super excited to improve my car with the support of CarPlay, and everything works great except for one thing. When I connect my iPhone (6s +) to the unit via a USB cable and a standard phone call, the audio quality is very bad - hail, very downsampled, and metallic sounding compared to the use of Bluetooth via the unit to pioneer for the same phone call (I'm on LTE, using HD voice, although the quality difference is quite noticeable on the calls not HD and on the 4 G calls). I looked for an answer to this question, but the best that I can find mention of limited USB bandwidth and try to juggle than the bandwidth for the rest of the CarPlay experience, although I don't buy not because audio via the iPhone connected with USB playback is just as clear that it is through Bluetooth. So my question is: How can I submit a bug report Apple about this behavior and (b) do you have other CarPlay users also be known this recent problem on a unit of Pioneer NEX (AppRadio included)? It would be great if this is a bug of Pioneer for which they can release a firmware update, I'm just worried that it is a codec problem specified by the CarPlay, so non repairable.
Thank you for using communities of Apple Support.
I understand that when you use the USB cable for your iPhone in your car with the audio CarPlay is mediocre. I know how it is important for you to hear your calls clearly. In a situation like this, I recommend the steps described in the following article to help solve the problem.
Specifically the section to get help:
If CarPlay does not work as you expect, here's what you can check. After each step, try to use CarPlay again.
- Make sure that Siri is turned on.
- Restart your iPhone and your car. Depending on your car, you can see the CarPlay home screen when you turn it on. If you do not, look for the CarPlay logo on the screen of your car.
- If possible, connect your iPhone to a different USB port in your car.
- Try a different lightning to a USB cable. Make sure that the cable is certified.
- Update to the latest version of iOS.
- Check the manual using your car. You may need to install updates of firmware for your stereo.
See you soon
I made the mistake to disable all my USB ports in the device (Windows XP Home Edition) my mouse Manager and the keyboard works not because they are connected through USB ports. I need to find a way to get to the system restore through the Mode without failure or normal startup. Can someone please help!
- Do you use your laptop or desktop computer?
Check if keyboard works in basic input/output system (BIOS), if it works, then you will need to enable USB port from there.
You will need to contact the manufacturer of the computer to aid in the basic input/output system (BIOS).
If this does not help then you need to connect PS\2 mouse and activate later all USB ports on the computer.
Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
erased win 8 and reinstalled win 7 ultimate. Now computer will not recognize and usb ports. What should I do?
I use a Compaq Presario 5320. USB works, that I plug my Saitek yoke and it works correctly. It's only usb drives I plug in I get the message, that he doesn´t recognize...
The problem with coming back to win 7 is may or may not win 7 drivers. I would contact Compaq to see if there is win 7 drivers.
Another problem if your computer comes with win 8 pre-installed revenant may void the warranty
I used to be able to just plug my curve into the USB port on my car and it was considered as a media device. Now, when I do that with my new z10, he seems to want to install Blackberry Link on my stereo which of course will not happen... any ways around that?
You have "USB Mass Storage" enabled in the settings under the storage and access?
Who should stop trying to present the image of the CD to your media device.
Turning on the PC with a wireless receiver (Microsoft model 1119) plugged to any USB port causes Windows Vista does not load. Turn off the PC, unplug the receiver, put the machine, loads without problem. Once windows is loaded, reconnect the receiver wireless Microsoft and less than a minute, the keyboard and the Microsoft wireless mouse works perfectly. Device Manager does not take into account conflict of devices.
Thank you for keeping us posted.
Check if the hard disk has been set as the first boot device in the boot coastal in Input/Ouput order Basic (BIOS). Otherwise, you can set the hard drive as the first boot device and check.
Consult the manual of the manufacturer, to do the same thing.
Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from configuration can resolved BIOS/CMOS settings. Changes to settings are at your own risk.
Hope this information helps.
I have a new HP Pavilion dv6t-6100 CTO. The laptop has two 3 USB ports (two USB 2 ports). Each device/device USB 2 cable I plug to one of the 3 USB ports plug far enough. The smallest movement of the appliance or the cable is disconnected from the system. What I've read, USB 2 connectors are supposed to work on 3 USB ports. Has anyone else seen elsewhere? If so, were you able to solve the problem?
I solved the problem, but do not know why the solution worked. I decided that if the USB 2 connector does not far enough in Socket 3 USB, the USB 2 connector should be too long. I took a junker USB cable and filed down to the upper part of the connector. When I inserted in socket USB 3, he went inside. I unplugged the junker and plugged the cable USB 2 of origin. It went as if by magic at bottom! I tried the USB cable in the USB 3 port 2nd and he went only all 3/4ths of the way. Plugged my junker cable into the port, disconnected the junker and plugged the unmodified USB cable... and it went all the way. The two ports are now (at least with USB 2 devices). Couldn't tell you what a shortcut connector plug has to do with but fixing it.
Sorry for the long cuff links in the title. I was wondering if I need a specific power cord or if I can use any string to 3 old shutters. Also have cords in the HP store? I had a devil of a time trying to find it. The computer is a Pavilion Slimline s5610f. Thanks from a newbie on the HP forums!
Did you buy your machine from another country? I can't believe this, HP provides no USB cable on some printers and now without power cord for a PC. Even in many countries of the third world, they still have rules on the power cords and normal for a country power cords should be allowed to use on devices sold in this country. Have you checked the box, the store where you purchased the machine (if local) must provide a power supply for you.
Whenever I disconnect my power cord Windows 8 displays an error dialog box:Runtime error!Program: C:\WINDOWS\system32\atibtmon.exeThis application has requested the execution to terminate in an unusual way.For more information, contact the application support team.Anyone with the same problem?Any fix for this?Computer: DELL Studio XPS 16
I encountered this problem with my Pavilion DV6 after upgrade to W8 64 bit as well and is more annoying than it should be. For what it's worth, I opened the AMD Vision Engine Control Center and disabled the "Vari-Bright" option on the power tab and which seemed difficult to get the error message every time my laptop is unplugged. Does not solve the underlying problem and will decrease my time unplugged a bit, but I can live with that.Thanks for the steps, Amiarage. Looks like we will have to just wait for ATI to fix.
Hello world. I bought the boombox Sony players of CFDG700CP years and love it. Recently, I had to save my space so I gave my niece little (left his eardrums little dance on this awesome bass!) (LOL). Only problem is that I can't find the power cord for the boombox. Can someone tell me what kind of power cord use this boombox? I thank in advance for your time.
Looks like it should be this one:
Maybe you are looking for
Microsoft automatically installs updates when I turn off my computer, but when I turn it back on it configures restart them itself in the process but not re - start launch Startup Wizard of windows that automatically restores the computer before the
I have trouble to configure my EA 4500 as an FTP server. I followed all the instructions according to the manual, but cannot access the USB I connected tot the EA4500 of the internet. When I try to connect my own network, everything works fine. The c
It allows to close (as in standby mode) when I travelled and stayed in a hotel but now he does at home. When I turn on the computer, it starts to enter the mode "sleep" and I hit the space bar and he comes back to the top in the same place, I've bee
the problem started 2 weeks ago... and I tried everything but I don't want to give up. I did to opcions may for my password and the hotmail send me whenever some newones so I tried everything... but now is not working and I don't know what to do I do
Is it possible to install my printer so that when I scan my computer and save in JPEG, the Scan preview screen will come so I can adjust my range before sweeping it records on my computer? So far, the only time where I can make up the preview screen