The print spooler has a problem and closes its doors.

Similar Questions

• Sony Vaio hangs when put on sleep and then I get "the Navy PC has a problem and needed to restart.

  (Local) information system
  computer name: VAIO
  Windows version: Windows 8, 6.2, build: 9200
  Windows dir: C:\WINDOWS
  Material: SVT15112CXS, the company Sony, VAIO
  CPU: GenuineIntel Intel (r) Core i5-3337U CPU @ 1.80 GHz Intel586, level: 6
  4 logical processors, active mask: 15
  RAM: 8463339520 total
  VM: 2147352576, free: 1850195968

  Crash Dump Analysis
  Crash dump directory: C:\WINDOWS\Minidump

  Dumps are enabled on your computer.

  05:13:46 GMT on Thursday 5 December 2013 crashed your computer
  crash dump file: C:\WINDOWS\Minidump\120413-19812-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0 x 54106)
  Bugcheck code: 0x9F (0x4, 0x12C, 0xFFFFFA8007A3F4C0, 0xFFFFF880009C1810)
  Error: DRIVER_POWER_STATE_FAILURE
  file path: C:\WINDOWS\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: this bug check indicates that the driver is in an inconsistent or invalid power state.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  05:13:46 GMT on Thursday 5 December 2013 crashed your computer
  crash dump file: C:\WINDOWS\memory.dmp
  This was probably caused by the following module: ntkrnlmp.exe (nt! KeBugCheckEx + 0x0)
  Bugcheck code: 0x9F (0x4, 0x12C, 0xFFFFFA8007A3F4C0, 0xFFFFF880009C1810)
  Error: DRIVER_POWER_STATE_FAILURE
  Bug control description: this bug check indicates that the driver is in an inconsistent or invalid power state.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Thursday, December 5, 2013 3:08:50 AM GMT crashed your computer
  crash dump file: C:\WINDOWS\Minidump\120413-19453-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0 x 54106)
  Bugcheck code: 0x9F (0x4, 0x12C, 0xFFFFFA800DCCF5C0, 0xFFFFF880009C8B60)
  Error: DRIVER_POWER_STATE_FAILURE
  file path: C:\WINDOWS\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: this bug check indicates that the driver is in an inconsistent or invalid power state.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  1:22:29 AM GMT on Thursday 5 December 2013 crashed your computer
  crash dump file: C:\WINDOWS\Minidump\120413-35031-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0 x 54106)
  Bugcheck code: 0x9F (0x4, 0x12C, 0xFFFFFA8007A5E8C0, 0xFFFFF880012AB810)
  Error: DRIVER_POWER_STATE_FAILURE
  file path: C:\WINDOWS\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: this bug check indicates that the driver is in an inconsistent or invalid power state.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Wednesday, December 4, 2013 10:55:10 AM GMT crashed your computer
  crash dump file: C:\WINDOWS\Minidump\120413-16562-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0 x 54106)
  Bugcheck code: 0x9F (0x4, 0x12C, 0xFFFFFA800706BA00, 0xFFFFF80285993810)
  Error: DRIVER_POWER_STATE_FAILURE
  file path: C:\WINDOWS\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: this bug check indicates that the driver is in an inconsistent or invalid power state.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Jaime

  I'm glad that I can help you.  Run the Driver Verifier to find the driver who behaves badly.

  Driver Verifier (for full instructions, see our wiki here)

• Mac dreamweaver for the hotspot tool has a problem and I can not choose anything?

  Anyone know the reason for this bug?

  First of all, make sure that you are in Design mode by selecting it from the drop-down list Liv/Design...

  

  Then, select the image and the Image Map tools will appear in the Properties window...

  

  If you are in Split with Live View, the tools will not appear. You MUST have view on the design tools toolbar or they do not come to the top. DW CC2014 and later, a Live view editor that allows for editing mode Live View. Unfortunately, Adobe still has failed the LVE all functions of the display of old design.

• How to restart the print spooler in Wnidows 8

  The print spooler is a service that is built into most Windows operating systems. His job is to help control print jobs and interact with the printer. Problems with the print spooler are blocked in the queue of print jobs.

  Sometimes the print spooler stops working or was an error to occur. The following video shows how to restart the print spooler service in Windows 8.

  For similar problems with printing try printing HP and the Scan doctor. It is a diagnostic utility that can sometimes find and solve printing problems. Find and fix common problems printer using HP Diagnostic tools

  I hope this helps someone who has problems with their print spooler or who needs to restart. If someone has a problem to restart the print spooler let me know and include your computer model number and that you use 32-bit or 64-bit of Windows 8.

• With the help of Windows 8.1. How can I delete a print job in the print queue has hung up?

  I have a print job that has been delete forever and will not respond.  He is suspended and cannot allow anything else to be printed.  How can I remove this.  I have windows 8.1.

  Hello

  From the desktop, hold down the Windows key and press R.  In the run window, type services.msc and press to enter.  Scroll down to the print spooler service, right click and select Properties, then click the Stop button.  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.

  Restart the computer and you should find that the document has been deleted.

  Kind regards

  DP - K

• Error 1053 of the print spooler for HP Officejet 6500 a Plus All in One printer

  I get this error every time I try to install this printer. When I try to start the spooler in Services file, this error pops up. I ran a diagnostic and found that there may be errors of registry key in some files, but I don't kn Ow how to get rid of them. I tried every way start the print spooler, but he won't let me. Other diagnostic tools do not work because I can't even install the printer of dam. Help!

  The print spooler is a Microsoft services so that they would be the best people to talk to.  Most likely, the registry keys for the print spooler has not installed right.  My advice would be to format and reinstall the OS, but you can see what Microsoft has to say before doing this.  They may know a solution for this specific error.  Here is a link to a discussion I found on Microsoft Community on this issue.  I hope this helps.

  Print spooler starts windows 7 error 1053

• How can I get the print spooler to start when the file is missing: lexbces.exe? where can I download this file?

  I TRIED TO RE-INSTALL MY HP WIRELESS PRINTER AND IT WOULD NOT INSTALL. I HAVE RECEIVED AN ERROR MESSAGE THAT THE PRINT SPOOLER WAS NOT WORKING AND STOPPED. I have TRIED TO START THE PRINT SPOOLER AND FOUND what IT MISSING THE lexbces.exe FILE. I THINK THAT WHEN I UNINSTALLED THE HP PRINTER, HE WALKED OUT OF THIS FILE. IT IS IN THE SYSTEM 32 AND A FILE OF REMOTE PROCEDURE CALL. DOWNLOAD THIS FILE OR DO I HAVE TO RE-INSTALL WINDOWS XP?

  Lexbces.exe is from Lexmark (or Dell-badged Lexmark) printer install.  When the Lexmark printers are installed, they configure the print spooler to depend on Lexbces.  Unfortunately, when you uninstall the software Lexmark, the uninstall program removes the file but does not have the print spooler dependency.

  Open a command prompt window (start > run > cmd > OK)
  Type the following line in the black command prompt window and press enter

  dependent on the spooler of sc config = RPCSS

  Note that there is no space before the = but there is a space after it.

  Restart the computer.

  See the instructions on One Article to do a clean installation of your printer.

  After the restart, you can check that the print spooler has started in several ways.  One way is:

  Open a command prompt window and type the following command, and then press ENTER:

  spooler request SC

  You should see the following in the command prompt window:

  spooler request SC

  Service_Name: Spooler
  TYPE: 110 WIN32_OWN_PROCESS (interactive)
  STATE: 4 RUNNING
  (STOPPABLE, NOT_PAUSABLE, ACCEPTS_SHUTDOWN)
  WIN32_EXIT_CODE: 0 (0X0)
  SERVICE_EXIT_CODE: 0 (0X0)
  CHECKPOINT: 0X0
  WAIT_HINT: 0X0

• Spooler subsystem app has a problem and needs to close and... .instructions @ 0x0041003d referenced memory @ 0x0041003d memory could not be read.

  I have windows xp svc pack 3. I have 2 printers hp psc 2410, samsung ml2010.  I've never had a problem until recently, and now I get 2 messages all the time... the spooler subsystem app has a problem and needs to close and... .instructions @ 0x0041003d referenced memory @ 0x0041003d memory could not be read.  Whenever I try to print my computer crashes. I tried to uninstall and reinstall the two printers.  no luck.  I tried mrfixit and when it comes to the printer part, mrfixit seems stuck in a loop and it is doing nothing more than an hour.  no luck.  I paid for norton antivirus, thinking it was a virus. no change.  paid for advanced system optimizer. no change.  Now that?

  Hi MarthaForner,

  You can read the following article and check if it helps.

  You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close."

• The Print Spooler Service has stopped. Restart the print spooler and try to print and make the same mistake.

  Recharging according to the printing software and get always the same error.

  Hello

  You must ask in the answers – Windows Forums for your version of Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  How to ask a question
  http://support.Microsoft.com/kb/555375

  ==================================

  Here is a troubleshooting guide for Windows 7 - Vista would be very similar.

  Check with the printer manufacturer for updated drivers and support for known issues.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ==================================

  Follow these steps in the kind of prerequisites:

  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ------------------------------------------------------

  References to Vista also apply to Windows 7.

  Go to the printer manufacturer's website and get the latest drivers - download - REGISTER - install yet. When loan
  to install - make a right-click on the pilot - run as administrator.

  Also check with the manufacturer of your printer and forums support.

  --------------------------------------

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------

  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service (see the following link BlackViper for Windows 7 default dependencies)
  http://wiki.blackviper.com/wiki/Print_Spooler

  BlackViper Windows 7 Service - default settings
  http://www.blackviper.com/Windows_7/servicecfg.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Whenever I do a right click on a file I get the error message that Windows Explorer has a problem and needs to close

  original title: problems of files

  Whenever I do a right click on a file I get the error message that Windows Explorer has a problem and needs to close.

  Sometimes, the problem is caused by a third-party extension. ShellExView can be useful to see what shell extensions have been introduced in the Explorer. Lire read on this topic, then scroll down to download the x 86 (32-bit) or x 64 (64 - bit) version here near http://www.nirsoft.net/utils/shexview.html

  When you run it, click the column of company for sequence entries in alphabetical order. Suppose Microsoft entries are in good faith and focus on others. Is something listed that is useless or unknown? If so, select it and click the Red (on top left) task to turn it off. You can find more easy to disable them all and then reactivate (green area) one at a time and Explorer of execution until the culprit is found.

• Explorer.exe has a problem and needs to close, then no icons on the desktop or taskbar.

  Dell Dimension XP SP3 Media Center. Started with the error box of explorer.exe has a problem and needs to close to logging in any user. Information about the error is explorer.exe 6.0.2900.5512 user 32. dll mod ver 5.1.2600.5512 offset 000d9d9

  When you click on debug a doctor Waston has encountered a problem error box. Error closing box you take at bottom of screen with no icons or taskbar. You bring up the Task Manager, but does not run any new task. After studying the problem found that run sfc/scannow will bring back normal office and functioning of this session. Problem returns the next time the computer is started. Update history audit showed an installation failure of update KB 971029. Reinstalled update and normal office appeared for this session. sfc/scannow application of Service Pack 3 CD 4 times and WinXP CD2 6 times. Using XP CD provided with the computer says it's the wrong CD. Cancellation through sweeping back normal functioning during this session.

  Hi ChrisGangaware,

  · Do you remember all the recent changes on the computer before the show?

  Try the methods below:

  Method 1:

  I suggest to complete the process of analysis of the system, you can follow the steps in the link when he asks for the CD-ROM service pack below: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker: http://support.microsoft.com/kb/900910 (valid for Service pack 3)

  Method 2:

  If that does not help, then try to perform the system restore and restore the computer to the previous date it worked great:

  How to restore Windows XP to a previous state: http://support.microsoft.com/kb/306084

• Have a new Dell, the print spooler must be started manually, and after you close the properties of the printer etc.

  Problems with the print spooler, is not serious what printer etc. have removed all and re-installed... the spooler, must be started manually everytime... after I restart the service., he works for a few minutes and stops at OFF, normally 3 or click during the verification of the properties of the printer etc... Help please!

  Jimmyp5,

  Print jobs stuck in the queue can cause problems. Try to run the remove print jobs , and then restart your computer.

  So try these settings...

  Start, Control Panel, Manager of devices.

  Go to the section USB controller, and then click the plus sign +.

  Go to each USB hub root and right-click on it, on the left, click Properties, on the left, click power management. Uncheck the allow the computer to turn off this device to save power.

  Restart your computer.

  --------------------------------------

  Start, Control Panel, Manager of devices. Click Network and then right click on your wireless network adapter, on the left, click on properties, power management. Uncheck the allow the computer to turn off this device to save power.

  Rick

• Trying to install Canon MP250 with a Windows XP Professional version 2002 service pack 3 OS.___Receiving several associated messages.___Fix error Printer Spooler app it yourself and Fix for me the MS site options have failed. ___

  My OS is Windows XP Professional version 2002 service pack 3

  Spooler subsystem app has encountered a problem and needs to close.

  Spoolsv.exe - application error
  the instruction at "0 x 00300000" referfenced «0 x 00300000» memory  the memory could not be "read".  Click ok to complete the program, click Cancel to debug the program.

  When I try to manually restart the print spooler, I get the error message:

  script error Internet explorer
  an error has occurred in the script on this page
  line: 1
  Char: 1
  error: unspecified error
  Code: 0
  URL:RES://c:\Windows\System32\mmcndmgr.dll/views.htm

  I tried all the fix it you suggestions on the site of MS (by removing printers, printers spool, drivers, driver files, editing the registry...)  Still the same problem resurfaced.  I even downloaded a registry cleaner to give a shot and no progress.  The only thing that I have not been able to do is, log in Safe Mode, because doing the newspaper in tells me that my password/login is incorrect (also a great mystery)
  I also ran all the fix for me programs offered - no. RESULTS

  I am extremely frustrated, I should share the printer and try another brand.  Who count? Help, please

  Hello Demars_will,

  Thank you for your message.  There are a few known bugs for this problem.  Try these two steps:

  Try first to this step:
  Put your XP CD in the CD drive.
  Click "Start" > click "Run" > Type EXPAND/r 'TheCDDriveLetter' \i386\SPOOLSV. EXE C:\Windows\System32 and press "Enter."
  Click "Start" > click "Run" > type SPOOLSV. EXE/install and press "Enter."

  Click 'Start' > right click on 'My computer' > select 'manage '.
  Click the (+) sign next to Services and Applications, under Select 'Services '.
  On the right, locate and double-click "Print Spooler" > auto value startup > select 'Start' > click 'Apply and OK.

  A test to see if the spooler has begun.

  If this is not the case, click HERE for a registry change that may solve your problem.  There are a few different registry changes, I don't know if you have tried this one or not.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Please let us know if it did or did not help to solve your problem.

  Soon Jason Microsoft Support Engineer answers visit our Microsoft answers feedback Forum and let us know what you think.

• Printer not print indicating the print spooler is stopped and does not restart

  Original title: printer does not print

  The print spooler is stopped and does not restart. I have a laptop with Windows 7 and the printer is a HP Officejet 8600 (network). My wife has the same laptop model and has no problem with printing. Any help you can give would be welcome.

  David Torres

  Hi David,

  Thanks for posting your question in the Microsoft Community.

  I understand that this printer not print indicating the print spooler is stopped and does not restart. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  . Have you made any recent hardware or software changes to your computer before the show?

  Please follow the methods and mark the question below:

  Method 1:

  Step 1:

  Run the Microsoft Fix It from the link below.

  Diagnose and automatically fix problems printing and printer:

  http://support.Microsoft.com/mats/printing_problems/

  Step 2:

  Follow the steps in the link below.

  Printer in Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:

  You need to check if the Printer Spooler service is started from services.msc.

  a. click Start, click run, type services.msc.
  b. double-click the print spooler and verify that the status is set as Automatic or Manual.

  c. right-click on print spooler and click restart.

  Your response is very important for us to ensure a proper resolution. Please get back to us to help you accordingly.

  I followed method 2 above. When I Rt click Spooler printer restart remained gray when I click on START, I get the message "Windows failed to start the service on local computer print spooler.   ERROR 1053 the service did not demand launch or timely control.
  What can I please?

• Update of Acrobat Pro XI crashed the program and the print spooler

  I have a brand new 10 windows computer and had installed Acrobat Pro XI which worked great until the latest update has been released. My computer tried to auto install the update and the update failed. Immediately when it failed, it crashed my spooler to print and all my printers disappeared; I was unable to reconnect to them without having to restart the computer.

  The Acrobat site suggested that if the update was unsuccessful and failed, I should uninstall Acrobat Pro and reinstall it. Well, I tried that and the problem cascaded gets worse. Acrobat does not provide ANY technical assistance with this kind of thing except through public forums.

  When I tried to uninstall Acrobat Pro, as the site of Acrobat has suggested, I ran into the problem with the print spooler again; He could not reset and start. For example, Acrobat Pro can / can not be uninstalled. I tried to 'fix' the installation without success. And when I tried to reinstall the program, it could not properly reinstall because I had to install the 'Adobe Application Manager' that does not install with the following message: "Installer failed to initialize. " Please download Adobe Support Advisor to detect the problem"and has provided a link. Of course, when you click on the link, you get another message, "that The Adobe Support Advisor has been abandoned" direct me to the forums that provide absolutely NO support for that either.

  At this point, I lost my * expensive * Adobe Acrobat Pro XI product, with no way to reinstall and no help to fix this Adobe created. In addition, I now have another serious problem with the print spooler.

  If * person * helpful suggestions, please send them my way. I'm ready to throw Acrobat altogether and never use one of their products that has been such a mess to deal with.

  Hi rickj90358804,

  If you try to install Acrobat XI via Adobe Application Manager, I suggest to download an installer manually using this link: download Pro or Standard versions of Acrobat DC, XI or X and try to install again.

  In addition, you can contact the support as kglad mentioned above.

  Kind regards

  Tariq Dar.