The Print Spooler Service has stopped. Restart the print spooler and try to print and make the same mistake.

Recharging according to the printing software and get always the same error.

Hello

You must ask in the answers – Windows Forums for your version of Windows.

Answers - Windows Forums
http://answers.Microsoft.com/en-us/Windows

How to ask a question
http://support.Microsoft.com/kb/555375

==================================

Here is a troubleshooting guide for Windows 7 - Vista would be very similar.

Check with the printer manufacturer for updated drivers and support for known issues.

Check chan seen message here - one of the highest.

fixed spooler subsystem app stopped working
http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

==================================

Follow these steps in the kind of prerequisites:

Clean the General corruption and repair or replace the damaged/missing files.

Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

Then run checkdisk (chkdsk).

How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html

------------------------------------------------------

References to Vista also apply to Windows 7.

Go to the printer manufacturer's website and get the latest drivers - download - REGISTER - install yet. When loan
to install - make a right-click on the pilot - run as administrator.

Also check with the manufacturer of your printer and forums support.

--------------------------------------

Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
the latest driver).

Check Mr. Fixits here and if you use the other methods go back and try again later.

Problems of print and error - a Mr Fixit of printing
http://support.Microsoft.com/GP/printing_problems

Solve printer problems - a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

------------------------------------------------------

Logon as administrator

Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

You can copy and paste each line except those brackets and press ENTER after each.

net stop Spooler

(echo suppression of all print jobs)<-- you="" should="" see="" this="">

ping localhost n 4 > zero

del/q %SystemRoot%\system32\spool\printers\*.*

net start Spooler

(sound Done!)<-- you="" should="" see="" this="">

ping localhost n 4 > zero

Another way
http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

If you use Control Panel - Classic - printers

Try after unplugging your printer if necessary.
-------------------------------------------------------------

Also check the spooler print and its dependencies and addictions Service.

Print Spooler service (see the following link BlackViper for Windows 7 default dependencies)
http://wiki.blackviper.com/wiki/Print_Spooler

BlackViper Windows 7 Service - default settings
http://www.blackviper.com/Windows_7/servicecfg.htm

How difficulty Windows Vista print spooler starts do not
http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

------------------------------------------------------------

Check this thread if necessary - to stop and erase the spooler

http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

and here

http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

Tags: Windows

Similar Questions

  • the NVIDIA driver helper, version 186.44 service has stopped working

    the NVIDIA driver helper, version 186.44 service has stopped working...? ! How do I fix'it

    Hello

    1. When did you get this error?
    2 have you made changes on the computer before this problem?
    You can try uninstalling and reinstalling nvidia graphics card driver installed on your computer. Follow the steps.
    (a) click Start and type devmgmt.msc and press ENTER.
    (b) find graphics cards and expand it.
    (c) make a right click on the adapter and select uninstall.
    (d) restart the computer.
    Windows should install the necessary drivers.
    You can now try to install the latest graphics driver on the nvidia site.
    Check out the following link.
    http://Windows.Microsoft.com/en-us/windowsvista/update-a-driver-for-hardware-that-isn ' t-work correctly
     
    If the problem persists, please contact nvidia to get help. Check out the following link.
    http://www.nvidia.com/page/support.html

    It will be useful.
  • the profile service has stopped working

    For the last two weeks when I started my Studio Hybrid, I get the message "the profile service has stopped working".

    Most of the time I have to restart in safe mode and do a restore.
    McAffee said I'm sure as well as Windows Defender, and still I can't sign.
    What is happening all of a sudden?
    Thanks for any help you can provide.
    Ron

    Hello

    1. What is the error message or an exact error code?

    2. Since when are you facing this problem?

    3. have you made changes on the computer recently?

    I would suggest trying the following methods and check if it helps.

    Method 1:

    Try to start the service: the user's profile and check if it helps.

    Follow the steps to start the user profile service:

    a. click Start, type Services.msc in the search box and press enter.

    b. Locate the service: user profile Service.

    c. make a right click the service: user profile Service , and then click Start.

    Method 2:

    Run Microsoft Safety Scanner and check if it helps.

    Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

    Method 3:

    Try to create a new user account and check if it helps.

    Create a user account: http://windows.microsoft.com/en-us/Windows7/Create-a-user-account

    Also read the following article to help of method 3.

    Copy files to a new user account: http://windows.microsoft.com/en-US/Windows7/Fix-a-corrupted-user-profile

    I hope that helps!

  • "Unfortunately, the content delivery Service has stopped" appears when I start the system.

    Dear friends,

    I use Thinkpad Tablet. Since the day bf yesterday, this message appears when the system startup is almost finished. Someone knows how is it? Thank you!

    I solved this problem by the method in the post
    forums.Lenovo.com/T5/ThinkPad-Slate-Tablets/quot-Unfortunately-Content-Delivery-Service-Has-Stopped-quot/TD-p/897731.

  • «Get the message at startup...» "Host process for Windows Services has stopped"... and sometimes losing his

    I started getting a message every time I boot my laptop Compaq Presario CQ60. Message is "host process for Windows Services has stopped". My speaked symbol now has a red cross I've ever had before. When it turns off I often have not all sounds. I have a feeling that this has happened after an automatic update. I did a system restore, but this does not solve the problem. It's the sound that is most annoying that I never know when or where I will not have it. I hope someone can help

    To clarify, the two problems was started at the same time?

    Try to perform a clean boot in an attempt to determine the cause of the error at startup:
    http://support.Microsoft.com/kb/929135

    Try reinstalling the latest audio drivers available on the manufacturer's website.
    Also, try the other steps listed here: http://windows.microsoft.com/en-US/windows/help/no-sound-in-windows

  • _ "WindowsUpdate_800700CB" "WindowsUpdate_dt000" ___Host that process for Windows Services has stopped working as was the closed .___The system not found the environment option entered .___User control of accounts

    I tried to download a 'Virtual Villagers' Limewire program (what was I thinking?) and then I had all these virus that messed up my computer big time.

    I have the error messages are:

    Host process for Windows Services has stopped working as was closed.

    The system could not find the environment option that was entered.

    When I try to install the updates:

    "WindowsUpdate_800700CB" "WindowsUpdate_dt000"

    The change I made before all this was trying to install Limewire "Virtual Villagers" program.

    I tried to go through the files and remove the sources of the Trojans, I ran several scans Malware Bytes (each indent to 4 Trojan horses, Rpot Kits, Ad/Spyware every time) and recently tried the Windows scanner. Who found 2 Trojan horses and withdrawn. Subsequently, I made a Malware Bytes scan which found 1 Trojan and I removed it.

    I'm not able to create, delete or modify anything in the UAC. Uninstall the habit of most of the things I try to uninstall programs and features. I'm more able to control the volume on my computer with the arrow keys and Fn. My Gallery of photos will not preview more and my computer will not install updates. My computer turns off without warning a lot and takes awhile where I can turn it back on and I hope not to have it close back 20 minutes. I try to use the system restore, but it won't work. I don't have a Windows Vista disc.

    How I have difficulty to all this and permanently delete all viruses and malware?

    Hello

    I suggest you try the following steps:

    Step 1: Try to create another user profile, and then test to see if the problem persists

    If you do not have a different user account, you will need to create a (see link below). If everything works fine with a different user profile, you can infer that the user profile is damaged, click on the link to find out how to solve this problem.

    Create-a-user account

    http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

    Difficulty of a corrupted user profile

    http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

    Step 2: You can follow the steps provided by Vincenzo Di Russo MVP to get rid of malware on your computer, please click onhere.

    You can see the steps mentioned in the link below

    Windows Update error 80070422, 80244019, or 8DDD0018
    http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070422-80244019-or-8DDD0018

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • installation of Windows services has stopped working when you try to install the software

    Unable to install software.tried cmd method, nothing happens

    Original title: installation of windows services has stopped working

    Hello Mohit,

    Welcome to the Microsoft Community Forums.

    I understand that you have a problem with the Windows Installer service.

    But I would like to know some more information on this issue to help you better.

    (1) what is the full error message?

    (2) what software are you trying to install?

    (3) have you tried to install any other software?

    (4) when you say, "tried cmd method" what exactly mean you?

    In the meantime, please try to follow the following suggestions to solve the problem.

    Method 1: First of all, try to follow the link below to troubleshoot the Windows Installer Service.

    How to fix problems with the Windows service install
    Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.
     

    I hope this helps. Otherwise, feel free write us back and we will be happy to help you.

    Thank you.
  • Get an error 'internet service has stopped working"when you are connected to the internet

    * Original title: my computer keeps do not stay online, I always get a message saying that the internet service has stopped working and it will constantly, I could make dionostics but in vain

    My computer is not online, I get a message that says service is stopped, reconnection. I have DSL service and you run programs to detect a problem, but nothing is

    Hello

    1. which browser is installed on the computer?

    2. What is the full error message?

    3 is this a wired or wireless?

    4. that all the troubleshooting steps have done?

    5 have have there been recent changes made on the computer before the show?

    I suggest you follow the methods provided below and update us with the results.

    Note: If you are using internet explorer, follow the methods provided.

     

    Method 1: Verify the problem by running Internet Explorer mode without modules.

    Temporarily disable all add-ons to see if the modules are the origin of the problem.

    To temporarily disable all add-ons:

    a. click the Start button.

    b. click on all programs, accessories, and click on system tools.

    c. click on Internet Explorer (No Add-ons).

    If the Internet Explorer (No Add-ons) mode works very well then an add-on may be causing the problem. You will need to re-enable each (process of elimination) in order to determine which one is causing the problem.

    http://Windows.Microsoft.com/en-us/Windows7/Internet-Explorer-Add-ons-frequently-asked-questions

     

     

    Method 2: Optimize Internet Explorer and check.

     

    How to optimize Internet Explorer

    http://support.Microsoft.com/kb/936213/no

     

    Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

    For more information, see the article and check.

    Tips for solving problems when Internet Explorer hangs or stops working

    http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-problems-with-Internet-Explorer

    Why is my Internet connection so slow?

    http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Let us know if it helps!

  • I get the message that adobe InDesign CC 2015 has stopped working. I updated and rebooted and still not be able to get.

    I get the message "Adobe InDesign CC 2015 has stopped working". I updated and rebooted and still impossible to get. Help me!

    Hello

    See the following topics:

    Adobe InDesign CC 2015 has stopped working

    Adobe indesign cc 2015 has stopped working

    Adobe Indesign CC (2015) has stopped working error

    Let us know if you need additional assistance.

    Kind regards

    Shelly

  • HP connection manager: Fatal Error, HP Connection Manager Service has stopped responding.

    Hey there,

    I have a very big problem with HP Connection Manager 4 on several Windows 7 laptops. The program is installed on about 250 laptop computers and some of them drive me crazy. Everything was fine until some point (I'm not quite sure, that could be after the installation of SP1, Win7), the connection manager has decided to stop working on some machines. Whenever I try to start it, it takes a long time to load until the following message is displayed:

    "HPConnectionManager.exe - fatal error '.

    HP Connection Manager service has stopped responding. Quit and restart the application.

    A fatal error occurred, check the HP connection manager in the event viewer for more details.

    Recovery of the factor of COM class for the component with CLSID {24DB46C8-C842-4E91-9AC4-8A9525A5551D} failed due to the following error 80080005. »

    I tried the following on one of these books:

    -Start the service manually: "Error 1067: the process terminated unexpectedly."

    -Msconfig: Removed any connection associated with Autostart Manager

    -Reinstall the HP connection manager

    -Repair HP Connection Manager

    -Reinstall .NET 3.5

    -Changed some regkeys

    -Install Microsoft Hotfix KB2519740 which is part of the system essential updates for Microsoft Windows 7 (that I can't download because there is a server error)

    More information:

    -(pour la plupart) HP Probook 6550 b

    -Windows 7 Enterprise 64-bit, SP1 (English and German MUI)

    -HP 4.1.22.1 Connection Manager

    The only thing that really works is to reinstall the laptop with the image with which we install all of them. HP connection manager is installed as a software later so I don't understand why a reinstall is successful.

    I'm really tired of this problem, and I have a few unhappy customers on my back, so if you have any suggestions for me, please help.

    Thanks in advance!

    You could try this on one machine that shows the issue and see if it helps:

    Relevant information:

    V4.4.10.1 Connection Manager

    Corrections in sp58930:
    -Fixes an issue where the setting of HP Connection Manager protocol PAP (Password Authentication) in the connection profile for Verizon LTE systems causes an authentication failure of network systems in some markets.
    -Fixes an issue where HP Connection Manager is not displayed in the configuration of the HP software.
    -Fixes an issue where event viewer displays an error in the HP Connection Manager once the system is restarted.
    -Fixes an issue where the HP Connection Manager displays the error message "SIM card is locked" when a PIN has been used successfully to unlock the SIM card.
    -Fixes an issue where the "Enter PUK" (Personal Unblocking Code) button does not appear in the HP connection manager when a SIM has been locked after the PIN code has been entered incorrectly.
    -Fixes an issue where the statutes of the wireless LAN and Bluetooth device not display correctly on the HP connection manager when Connection Manager is started while the wireless LAN and Bluetooth are turned on and connected.
    -Fixes an intermittent issue where network technology is incorrectly identified.
    -Fixes a problem that causes a HP connection manager to stop working and an error message is displayed.
    -Fixes an issue with the Spanish version.

    Prerequisites:
    • HP or Compaq machines only brand
    • Operating system is Windows XP or later
    • If the operating system is Windows XP, it must have installed SP3
    • Version of the .net framework 3.5 SP1 must be installed

    Improvements:
    -Supervises HP Support version 4.6.8.1

    Installation package:

    sp58930 Connection Manager V4.4.10.1

    =====================================================================================

    Hope that helps...

  • I get an error, "host process for windows services has stopped working" when I try to run a program.

    host process for windows services has stopped working a problem caused the program to stop working correctly windows closes

    Original title: host process for windows services has stopped working

    See if you have rootkits. Run tddskiller, if it finds rootkits, select cure, wait for it to finish and then restart your computer

  • CyberLink Media Library Service has stopped working

    I have a HP Pavilion dv7-30570nr, 64 bit, guard gel to the top and the error message that says that CyberLink Media Library Service has stopped working

    Hello

    Try to download and reinstall HP MediaSmart MVP on the link below.

    MediaSmart MVP

    When the installer is run, it should initially uninstall your current installation before you reinstall the application.  When this is complete, restart the laptop.

    Kind regards

    DP - K

  • Windows Service host process has stopped working... online and are looking for a solution

    I have a Lenove with Windows 7 Home Premium 64-bit of the system.  Yesterday I got stuck in a loop while looking for a dog boarding on Google.  I had to do a system shutdown to break out of the loop.  Since then, I get the message: «Host process for Windows services has stopped working...» "Also, I heard the music or script play twice since then and did a reboot to get rid of the problem.  I don't know that it will continue if I do not resolve what has caused the problem initially.  Also, I went into the control panel one checked all the sound icons and they are all OK.

    I'd appreciate if someone could give me some instructions on how to solve these problems.  Thank you!!

    Click on Start and open the Control Panel
    Click on System and select Advanced system settings in the left menu.
    Under performance, click settings.
    Click the Data Execution Prevention tab, then enable DEP for all programs and services except those I select.
    Select the check box next to the program that you want to turn off DEP for and then click OK.
    For older (if you want to turn off DEP for IE. Click Add: enter OS 32 bit (Internet program
    The Explorer and select iexplorer.exe) | 64 bit OS (Program Files (x 86) \Internet explore and select iexplorer.exe)
    Select the check box next to the program that you want to turn off DEP for and then click OK.
    Restart the PC and use the IE32 again
    Note: You can not set DEP to 64 bit IE
  • Svchost.exe application error, host process for Windows Services has stopped working

    Original title: Svchost.exe application error [windows loses focus]

    Every two minutes, windows 7 loses focus on the current window and I went in my event logs and found hundreds of errors of svchost.exe. Here's one of them:

    Name of the failing application: svchost.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc3c1
    The failed module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
    Exception code: 0xc00000fd
    Offset: 0x0000000000018e3d
    ID of the process failed: 0x81c
    Start time of application vulnerabilities: 0x01cd7970b1953fa0
    The failing application path: C:\Windows\system32\svchost.exe
    The failed module path: C:\Windows\SYSTEM32\ntdll.dll
    Report ID: efb97cea-e563-11e1-a232-002655497401
    The error message I receive after automatic power off repairs in the center of the Action is "host process for Windows Services has stopped working" and the process that opens after the loss of focus is Werfault.exe.
    Thank you for your time.

    Hello

    1. when exactly do you get this error message?

    2 have you made changes on the computer before this problem?

    Method 1:

    Step 1:

    Try to start your computer in safe mode and check.

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    Step 2:

    If the problem does not occur in safe mode, perform the clean boot. Read the following article.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: once you are done with the boot, please follow step 7 of article to reset your computer to normal startup.

    Method 2:

    Try to scan your computer with the Microsoft Safety Scanner and check.

    The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
    Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.

    Method 3:

    You try to perform the SFC (System File Checker) scan on your computer and check. Read the following article.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    It will be useful.

  • VMware Tools Core Service has stopped working

    Until I installed Mavericks one a few days ago, my MacBook Pro OS x 10.6.8 and was very happy merger 3.x.x running with a guest of Windows 7 Professional.

    After installation of Mavericks, I downloaded and installed the 6.01 merger. He "upgraded" my existing comments.

    Since then, he threw several times the error message "VMware Tools Core Service has stopped working".

    I uninstalled and reinstalled several times VMware tools. I ticked the box "prevent the NAP app." I have restored the old guest VM from a backup and it opens again.

    I can restart the service (using Windows 7 services Manager), but it runs for awhile then throws the same error.

    I've included dumpsters of screen of the info box - he appoints MSVCR90.dll as module faults. Out of curiosity, I looked at the control panel / uninstall programs screen and saw that that day, I installed Fusion 6.01, an instance of the 2008 C++ Runtime Redistributable x 64 has been installed (there are several other flavors of the VC ++ redistributable installed too: 2005/2008/2010, some x 86 and some x 64.)

    Thank you for any advice on how I can solve this problem.


    Duncan


    VMtools-1.png

    VMtools-2.png

    VMtools-3.png

    Try this one, bar menu of Fusion--> virtual machine > settings > default applications uncheck just the first option 'open files your Mac and links using Windows web applications '.

    Then restart the virtual machine, I got rid of vmware tools crashing this way! This was suggested by the vmware technical support team.

  • When I log on, a popup saying "host process for windows services has stopped working" How can I get rid of him?

    When I log on, a popup saying "host process for windows services has stopped working" How can I get rid of him?

    Original title: the process host

    How to perform a clean boot in Windows:
    (solve a problem by performing a clean boot in Windows Vista, Windows 7 or 8)
    http://support.Microsoft.com/kb/929135

    Perform a clean boot to determine if background programs are interfering with your game or other programs
    http://support.Microsoft.com/kb/331796

    One by one add back an application both in the boot list to find the offending software application that causes the message "host process for windows services has stopped working" is displayed...

    J W Stuart: http://www.pagestart.com

Maybe you are looking for