The problem is that the laptop start everything that I have the password and then just black screen with pointer

Similar Questions

• O2 dongle is never to step of the password and then just says device not detected / found

  Original title: im trying to use my o2 dongle to connect to the internet, but for some reason some he used to let me...

  Ive connected the dongle and it goes through the normal treatment it says connection. However, it's never at the stage of the password and then just says device not detected / found

  Hello

  You can try to reinstall the USB controllers and check.

  a. Click Start and type devmgmt.msc and then click OK.

  b. expand Bus USB controllers.

  Note: You will need to scroll down to find this point.

  c. the first USB controller under Bus USB controllers right click and then click on uninstall.

  d. Repeat steps above for each controller USB is listed under Bus USB controllers.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  f. check the device to see if it works.

  You can also consult the following link:

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Hope this information is helpful

• My laptop won't boot. All I get is a white, black screen with the cursor flashes in the corner.

  I tried boot cd of the Hiren s and changed the boot order to cd drive.  That did not work.

  My laptop is a compaq, about 8 years old and winxp.

  Press ctrl-alt-delete. If it works, go to file / new task, type explorer.exe. This brings to the top of the desktop computer? I wouldn't use Hirens CD. Go into the BIOS and change to the hard drive. If windows is installed

• I restarted my computer and then it no longer turns. The windows screen and then a black screen came up with a white line that flashes at the top left.

  I had tabs open, and he said that he would not allow restart, but still, I pressed ok and now nothing shows that this black screen.

  Hi Alegreen,

  ·         You receive an error message?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: Start in safe mode and do a System Restore to a point before the show.

  See Advanced startup options (including safe mode) for more information about starting in safe mode.

  Method 2: If the method above does not help, then you can refer the article and check mentioned below.

  What to do if Windows does not start correctly

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  I hope this helps.

• Firefox has upgraded to version 33 and does not work at all. I open the browser and get a black screen and a dialog box titled "authorization required".

  The black screen a dialog box empty with "Authorization required" as its header.
  Using Windows 7 machine.
  Can't follow your troubleshooting routine as I can't open Firefox at all!

  based on what I've heard from other affected users I'm going to guess you have a built-in hd3000 graphics card intel on your system and the outdated drivers for it.
  If this is the case, please perform a driver update: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23764

• Vista starts and has a black screen with a white pointer, what should I do?

  I have a toshiba satellite laptop computer with vista.  It seems to boot into an operating system, but I don't see a white mouse with a completely black screen pointer.  Is it a problem of theme, and in this case how to fix?

  Hello

  Try following the methods provided below and see if it helps:

  Method 1:

  Try logging in safe mode and check if you are facing the similar question:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If you are able to boot into safe mode, you can try a clean boot

  How to troubleshoot a problem by performing a clean boot in Windows
  http://support.Microsoft.com/kb/929135

   

  Note: Don't forget to reset the computer to start as usual when you have found the culprit. Follow step 7 on top of the kb article.

  Method 2:

  I would say that you want to run System Restore in windows recovery mode and check if it helps. See the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Method 3:

  I suggest to update the graphics drivers on the manufacturer's Web site, click on the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Also, try to restart the computer by pressing F8 and in the advanced startup options, select Enable VGA Mode and check.

  Disconnect external devices and check

  Hope this helps,

• Windows Mail suddenly asking for the password and then argues that it is incorrect

  Hello.

  I have my Microsoft Windows Mail related to my TalkTalk email address, and this has worked well for years. There always was a case of just clicking in the start menu E-mail - login has been automatic. Until a few days ago...

  Now, when I click to open Windows Mail, I get a box of security Windows popping up, asking me to "connecting to mail.talktalk.net". I get my user name and password as requested (and which I've confirmed are correct) and login box reappears just - emptied - asking me to repeat the process.

  When I cancel the logon box, I get the error: "account: 'mail.talktalk.net', server: 'mail.talktalk.net', Protocol: POP3, server response: '-ERR user name is required ', Port: 110, secure (SSL): no, Server error: 0x800CCC90, error number: 0x800CCC91.

  When I continue my Windows Mail, I find that I can send emails, but have not received anything since the beginning of this problem.

  Okay, I did a search for this problem, and it seems that although these error codes have something to do with my user name and password is not wrong. I checked all that, however, (Tools > accounts > properties > servers) and all the details seem correct and unchanged.

  I tried to connect to my e-mail account on the TalkTalk site, and it works very well - and confirms that I received emails in the last days. Try to do it via Windows Mail fair results in this area of connection from upward (she didn't use to) and he accepts not not my correct coordinates.

  Help please!

  Hmmm!

  I have a talktalk email account which has fallen into disuse, so I could do some tests.

  I can connect to the webmail of TalkTalk OK so I don't know the email address and password.

  I have configured Windows Mail with the correct information as stipulated on their help pages and get (almost) the same error as you, the only difference being the final code, which for me is20x800CCC9, so maybe you did a "typo"?

  I just watched the service status page...

  http://www.TalkTalk.co.uk/service-status/

  .. .and I see this open question...

  28/05/2013 10:35

  Open

  -

  Some clients may be unable to send and receive emails through email clients. E-mail is affected. Our engineers are aware of the problem and are currently studying

  Current

  So maybe you just need to sit still and look at the status page?

  Tricky

• I had a problem with my iPad 2 Air when I changed my Apple ID password, the problem is, it shows me a Massage says ENTER the PASSWORD, and then said your PASSWORD will be used when the signature with the new device, but when I but the code it shows fail m

  This problem happened to me and it belongs to iCloud and I have used so important, please can someone help me?

  Hello. The access code on your iPad is the code four or six numbers you will need to enter to unlock the device. It has nothing to do with the verification of your Apple ID or two-step. Are you able to unlock your phone? If you are, then please describe the steps that lead to your problem. Since you have changed your Apple ID password, you will need to go to two settings > iCloud and settings > iTunes and app store and sign out of your Apple ID, then connect back with the new PW.

• XP shows the MESSAGE about how to start, but then stops at a black screen with cursor

  Today, instead of start normally, my Dell displays the usual POST screen, then a black screen with a cursor blinking (dash). He is not following the XP splash screen. After the machine is turned off and restarting, I pressed F2 repeatedly and eventually got to the configuration of the system. Then I pressed ESC and exit, and the machine starts normally on the desktop. This has happened 3 times since. Social site from Microsoft suggests that the master boot record has been damaged, or that the NTLDR file may be missed. Anyone know how to check this?

  hunty7,
  Take a look at this article.  He explains a situation similar to yours and gives the troubleshooting steps.
  http://support.Microsoft.com/kb/314503

  Let us know the results. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Pavilion dm4 does not start: black screen with cursor blinking up to no left, no error message

  Nowhere on my HP Pavilion dm4 close last night and does not restart.  When I turn on the computer, I get a black screen with a cursor blinking in the upper left corner.  I ran a variety of diagnostics and all seems OK (i.e. no error message).

  I am able to start the computer in mode 'Media' - and I see all my files.  However, I'm unable to start the computer normally.  Help, please.

  My computer is old - 1 year and 25 days to 25 days outside the warranty period.

  Thank you.

  Hello

  Boot from the new rescue CD, select repair your computer and choose the command line.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the rescue CD and try to restart now.

  Kind regards

  DP - K

• After the use of any USB device, I stopped the device that comes in the window telling me it is safe to remove the device and then my computer crashes I have to make a difficult start to resume what I was doing. It is on a Toshiba Satellite running Vista

  After the use of any USB device, I stopped the device that comes in the window telling me it is safe to remove the device and then my computer crashes I have to make a difficult start to resume what I was doing.  It is on a Toshiba Satellite running Vista

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  ------------------------------------------------------------------------------------------

  If no joy, see Toshiba Support and/or their forums:

  Toshiba support and drivers
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba Support Forums
  http://laptopforums.Toshiba.com/

  Contact Toshiba
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  I hope this helps and happy holidays!
  Rob - bicycle - Mark Twain said it is good.

• Problem ejecting USB Mass Storage Device "this device is currently in use. Close any programs or windows that might be using the device, and then try again. »

  Original title: problem ejecting USB Mass Storage Device

  When I try to eject safely my external hard drive safely I get an error with this title message telling me that "this device is currently in use. Close any programs or windows that might be using the device, and then try again. "I did it. I also tried to close all programs running on the computer and it does not help. I also tried to restart the computer, and it also does nothing. If anyone has any ideas that might be useful please let me know.

  Hi a. Cook,

  (1) how long have you been faced with this problem?

  (2) is limited to any specific USB device?

  This problem may occur if there are handles open with all the files in the USB (Universal Serial Bus) mass storage device are in use by another program.

  Method 1:

  (a) Download Process Explorer from the link below

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653

  (b) click on search, find handle or DLL (Dynamic Link Library) in the tool menu.

  (c) type the drive letter of the USB device in the handle or DLL substring text box and press the search button.

  (d) find the process and its PID (process identifier) in the following box.

  (e) with a view to the processes of the system tree, look for the process according to the dialog box find handle or DLL.

  (f) press Ctrl + H to display the handles in the view in the lower pane.

  (g) find the file according to the drive letter and right click, choose Manage close.

  Reference:

  
  Problem ejecting USB mass storage device
  http://support.Microsoft.com/kb/555665

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Method 2: You can see the steps in the link below by Diana d.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/problem-ejecting-USB-mass-storage-deviceits-in-use/fd56805c-ED8E-491F-8a2b-39ed1c988a71

  Method 3: A scanner online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

• I have a chase bank credit card that I have good ranking and what number do I call to talk to I tunes because he says, use a different card, it's the map I was buy everything what I tunes. Is it because I have challenged their load m

  I have a chase bank credit card that I have good ranking and what number do I call to talk to I tunes because he says, use a different card, it's the map I was buy everything what I tunes. Is it because I thought them charge me twi

  Can I have it please the number on I tunes support whether please or have them call me at * Leonardo B *.

  < personal information under the direction of the host >

• These entire servers have the same problem, the problem is that I can't install and uninstall anything on them. (Exception from HRESULT: 0 x 80070490)

  Not enough disk space (428 and 488 event id)

  I have 3 servers,

  Exchange 2010

  TMG 2010

  Member Server. (2008)

  These entire servers have the same problem, the problem is that I can't install and uninstall anything on it even window update patches cannot be installed on it. On the server exchange and Member roll and functionality cannot be opened and displays the error message. (Exception from HRESULT: 0 x 80070490)

  Appear in the event viewer for most event IDS are 428 and 488 (not enough space).

  I have enough space on each server, IE more than 40 GB of free space.

  Please answer me if there is no possible solution.

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet forum
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• When you play FarmVille, my computer crashes or I get a notice that "bits have been lost" and refresh the page... usually don't work and I have to start all over again.

  When you play FarmVille, my computer crashes or I get a notice that "bits have been lost" and refresh the page... usually don't work and I have to start all over again.

  I think that there is a prob with this game, it does not matter if you use firefox or IE. Or another browser. It blocks something. Or causes probs.

  FB needs to fix it. There are a lot of people (in a Google search), who are having probs. One way or the other