the problem with the wi - fi does not work on windows 8.1

Similar Questions

• The scan button does not work on Windows XP Media Center edition 2005

  Name of the printer: hp psc 1350 all-in-one

  Hi, this is happened since I reinstalled the operating system with an OEM disc, removing all the hp stuff. I got a new OEM drive that comes from hp (I think... well hp stuff works now) but the scan button does not always work. The old record was kind broken.

  I don't mind, but it will be useful, if it could be repaired. Don't want to do something big, would rather just not fix that to do something does not.

  Note: Scanning works, but I have to look somewhere else (e.g. opening scan in the Panel)

  OK, that explains why the scan button does not work.

  The complete software is required for the scan button to work, it is not a feature of the base software.

  Be sure to follow the steps below in order to get is torted:

  1. Unplug the USB from the printer.
  2. On the start menu, enter the HP folder. and follow the link to uninstall to remove the current software.
  3. If you don't find it there, go into control panel > add or remove programs, and remove any software installed HP PSC 1300 series.
  4. Download and install the full feature below:
     http://ftp.HP.com/pub/softlib/software10/COL8901/MP-23606-3/gc_w01_ENU_NB.exe
  5. You will find the Director of HP under the HP software. If you have problems using it, make sure you install the following hotfix:
     http://ftp.HP.com/pub/softlib/software8/COL17377/OJ-46104-1/CIT207355-HPCOM-patch-V8.exe

  Kind regards

  Shlomi

• The cutting tool does not work after windows updates.

  I read answers to similar questions about the failure of the cutting tool.  I use the tool cutting regularly and I think it's a fantastic tool in Windows. I have Vista Ultimate and all my windows updates have managed: none were not installed correctly, and I did not install new programs or hardware.  It seems that Microsoft knows the snipping tool does not - why can't they simply provide an update patch to correct the problem, rather than make us do all the work.  I don't have to go through hoops of restorations etc to get something it seems work was broken by updates.  I'm about to go to a Mac.

  It worked for me! Thank you!

• The Task Manager does not work in Windows 7

  In Windows 7 Task Manager no longer works. I press Ctrl-Alt-Del and nothing seems to happen once I select "Task Manager"in the menu. I don't have the software for Windows disk because I bought from Best Buy HP desktop with Windows software loaded in.

  In Windows 7 Task Manager no longer works. I press Ctrl-Alt-Del and nothing seems to happen once I select "Task Manager"in the menu. I don't have the software for Windows disk because I bought from Best Buy HP desktop with Windows software loaded in.

  If the Task Manager does not start, your computer may be a virus. Make sure that you have installed on your computer updated antivirus software, scan your system with the AV software in safe mode.

• The legacy program does not work in Windows 7

  MD simple burner will not work on windows 7

  Hi macdent

  Welcome to the Microsoft Answers Forum!

  I recommend you to check if the software is compatible with Windows 7. Here is the link that helps you check the compatibility of the hardware or software with Windows 7 Windows Compatibility Center

  If the program is not compatible, then you try to install and run the program in compatibility mode. Steps to follow:

  i. right click on the program

  II. click on properties

  III. click on the Compatibility tab

  IV. Select run this program in compatibility mode and select windows vista

  Link for reference below: make older programs run in this version of Windows

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The syntax coloring does not work on Windows high contrast Theme

  -On Windows 10, if I use the default theme, coloring syntax works fine.

  -If I switch to my custom high-contrast dark theme Windows (black window background, white text), the text in Code view or the Code Inspector is a single color (white on black), and "Color Syntaxing" option is grayed out. So, it seems that Windows themes replace Dreamweaver.

  -If I switch to the default theme Windows 10, then turn on syntax coloring, then switch back to my high contrast theme, a few syntax colors stay, as tags HTML object, but most of the text turns white.

  - So I think that it is a bug fix / feature request: Please make Dreamweaver code replace Windows themes like the other apps do (Notepad ++ for example).

  My specs:

  Dreamweaver 2015.1 release, Build 7851

  10, 64-bit Windows Home

  In fact, not really a bug, but more than one function of wondering who I'll introduce.  Is not sound as there is no current workaround solution other that temporarily switching Windows to a theme non-haut contrast.

  I look forward to the update Dreamweaver CC 2016 which I've heard will bring a dark theme in the user interface.  Now, it would be just great if Windows 10 allowed customization of it of regular hardware accelerated theme and not relying on high contrast mode, which should legitimately outweigh everything else since this is a feature of "accessibility".

• I recently installed 29,0 FF and found a lot of problems with it, Noia 4 does not work, neither does Fox clocks and other issues. Have they been corrected 29.1?

  Is FF 29.1 that FF 29,0 where we users lose control of our browser and can not customize to our liking. If Yes, how do I stop the noise annoying ups tell me to install because of security issues or not I stay with 28.0 FF. Thank you people for any answer, they are much appreciated cheers.

  set the correct time zone, the date and time on your system: time.is

• Show / hide the dynamic Actions does not work in Windows 7 IE10 and APEX 4.2.1

  Hello

  I have a page in the APEX 4.2.1 reactive Blue theme, where show or hide page elements based on changes to other page elements and their values, in terms of JavaScript expression.

  It's that everything works well in Chrome 31.0.1650.63 m and 25.0.1, Firefox but not Internet Explorer 10. I thought it might be linked to this solution to the problem of Ajax IE10 | Code of Jason and tried their recommendation, but appears not to have contributed.

  Help please!

  Thank you

  Alex.

  I found the problem and it was my fault. One of my dynamic actions using JavaScript expression conditions was missing quotes in $v ("P1_ITEM1"), breaking the rest of the related JavaScript code. Chrome and Firefox did not care, but IE seems to be less tolerant of mistakes like that.

  Scott, thanks anyway. It is useful to know that I have that option as well.

• The CD/DVD does not work with El Capitan 10.11.5 on Macbook Pro

  Hello everyone, I spent the time to research on the here and the other site on why the CD/DVD does not work with El Capitan 10.11.5 on MacBook Pro mid 2009. This discussion forum has said that he will not work with the El Capitan software. Any idea or suggestion? Back to Marverick or Yosemite? I tried to use SMC reset, restart, recovery and still the same issue.

  I thank in advance.

  ~ Mike

  I have my doubts that the (10.11.5) software is the problem.  Are you sure that the DVD player is simply not defective?  Have you tried to clean the lens?  What is the State of the disc?

  Your best option may be a date at a bar in engineering of the Apple store for a FREE evaluation.

  Ciao.

• When I enter a Web site in the url of the Enter key does not work. I have to click on the arrow at the end of the line. Is this a configuration problem?

  The Enter key does not work in the line of the URL. If I go says:
  www.Bing.com
  and then press the Enter key, nothing happens.
  I have to click the arrow at the end of the field in order to activate the link.
  If I am anywhere else on any page the Enter key works as it should.

  Please click the button of resolved next to the answer that solved your problem of Firefox support, when you are connected.

• Question of Safari and Chrome. indicates on the navigation screen. "An element of the Protection of the family filter does not work as expected. Restart your computer. If the problem persists, contact support.  Error: failed to hose CPI. »

  Question of Safari and Chrome. indicates on the navigation screen. "An element of the Protection of the family filter does not work as expected. Restart your computer. If the problem persists, contact support.  Error: failed to hose CPI. »

  Quit Safari, Chrome to quit smoking. If necessary Forcequit.

  Start Safari while holding the SHIFT key, select the menu Safari ClearHistory, then after this check that the homepage is the one you want.

  Do the same for Chrome.

  Close all browsers, restart the mac.

• No matter what I try to play, I get this message, "Windows Media Player has encountered a problem while playing the file." And the media player does not work

  Windows Media Player

  No matter what I try to play, I get this message, "Windows Media Player has encountered a problem while playing the file."  And the media player does not work

  Reset the WMP.

  Step by step instructions are given here: -.

  http://www.mydigitallife.info/how-to-uninstall-and-re-install-Windows-Media-Player-12-WMP12-in-Windows-7/

• The Magentic program does not work with newer versions of windows

  Original title: Programas compatibility application applications app applications Juego Juegos Heredado USO caudal Cuelgue Cuelgues

  The Magentic program does not work with newer versions of windows

  Hello danielbrauer,

  The magnetic site says the requirements are for Windows XP or higher. However, it is not on the Windows Vista or the Windows 7 Compatibility Center.

  You can try the following to see if it will help with compatibility. If the program is not compatible, then you try to install and run the program in compatibility mode.
  Use the following steps:
  (1) right click on the program
  2) click Properties
  3) click on the Compatibility tab
  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If this does not help, you can contact the magnet to see if they have an updated version.

  Sincerely,

  Marilyn

• Connection problem: The DHCP service does not work.

  Original title: connection problem

  After got rid of a virus, my computer is always trying to get the network address. I found that the DHCP service does not work on my computer. How can I reinstall. I am running windows xp service pack 3

  Hello

  Follow these steps and check if they help.

  Step 1:

  Look for the DHCP Client service and DNS Client Services if they are started.

  a. Click Start.
  b. click on run and type Services.
  c. click right on - run as administrator.

  Check if the below mentioned services has mentioned State and type start.

  Client DHCP started Automatic\Manual.
  Client DNS started Automatic\Manual.

  Also check the dependency that are required for the DHCP Client services and DNS Client Service runs.

  To verify that double-click the service, and click the Dependencies tab.

  Step 2:

  I suggest you to reset TCP/IP settings to solve the problem.

  How to reset the Protocol Internet (TCP/IP)

• I installed Vista in a Virtualbox VM and the product key does not work, how to fix this? I use the same product key supplied with the computer originally.

  I bought a Dell Precision T3400 of Dell Financial Services and it came with Vista Business installed.  I installed a new hard drive and installed Vista in a Virtualbox VM by using the recovery disk that came with the computer, and the product key does not work for activation.  I get a message that says I need to activate Windows, but he says that the product key is not valid.  How can I fix it?

  Thank you

  If you have reinstalled the OEM of Vista Business copy on the new hard drive, as Bill says you can't also use it in a virtual machine.

  You can only reuse your OEM of Vista professional copy if it is no longer used on the computer. Do you have what operating system installed on the new hard drive? It was an upgrade copy or complete the license?

  If you used a license to upgrade to another edition of Windows to replace your copy of company then Vista Business license is still in use (for upgrade) and you cannot reuse it in your virtual machine.

  However if you replaced Vista business with a copy of the full license of another edition then you are able to use the OEM copy in a virtual machine, but only on the same computer. You must use the product key from COA to the label on the computer. The product key is put in the copy OEM cannot find the SLIC table on the host motherboard. You must use the phone activation from within the virtual machine. Click on start in Vista Business and typing "slui 4. Do not meet the audio guests until it asks you if you want to speak to an agent. Explain that you have completely replaced the OEM copy with a copy of the full license of the new windows and now want to use the OEM copy in a virtual machine on the same computer. Agent will then give you the activation string. Remember that the virtual machine is not transferable to any other computer.

  This information is offered by Darin Smith (MSFT) and the team of Windows licenses, November 18, 2011.