the procedure entry point longimp could not be found in the dll orauts.dll

Similar Questions

• the procedure entry point GetFinalPathNameByHandleW could not be found in KERNEL32.dll dynamic link library

  Hello

  While trying to install a program, I see the following on the screen error message:

  The procedure entry point GetFinalPathNameByHandleW could not be found in KERNEL32.dll dynamic link library

  The I set him, is a Windows XP 32-bit environment.

  The I am installing, is a program, created by my own company, using a 32-bit self-extracting installer, which is also created by my own business using InstallAnywhere Flexera software.

  No changes were made on the environment of the installers.

  No change seems is done on the environment for creating installation programs (where the self-extracting installer is created): I checked the monitor of reliability/Action Center / Control Panel and no entries are present between a job and an installer without work.

  The file 'KERNEL32.dll' is mentioned in the error message, I checked his date of change, which is 11/30/2012, this should not be the cause of the problem either.

  Witnin the self-extracting installation program, a few changes were found, those who are considered at the moment, but there is no indication or not those who are causing the error message I see here.

  Does anyone have an idea what may cause the error message mentioned and how to cope?

  Thank you

  Dominique

  These types of error messages mean that the program is looking "inside" the file specified (in this case kernel32.dll) try to find a function/procedure to run called "GetFinalPathNameByHandleW" and find do not.

  The program calls the non-existent function badly or the library file is not in there.  Things do not match somewhere.

  A DLL is a library of dynamic links and files as kernel32.dll are sometimes just a bunch of procedures/functions/subroutines and all located in a single, portable file.

  In a primitive way, you can use a text editor to open the kernel32.dll file (make a copy if it your desire) and search for a string "GetFinalPathNameByHandleW" and you will not find.

  You can even search for "GetFinal", and you won't find it in the XP kernel32.dll file:

  

  But if you do the same thing on a Windows 7 + kernel32.dll you 'll find:

  

  If your program calls a function inside a DLL, but this feature does not exist in the Windows XP's kernel32.dll file.

  I think that GetFinalPathNameByHandleW was introduced in Windows Vista, so now here you would be fine.

  If who wrote your program is that it works on XP, they need to stick to the functions that are part of XP and GetFinalPathNameByHandleW isn't here, where the error.

• 'The procedure entry point DecodePointer could not be found in KERNEL32.dll dynamic link library '.

  ORIGINAL TITLE: How can I fix this please?

  I have an older version of Windows XP (Home edition) Version 5.1.  Trying to get updated with service packs, etc., I get the pop up message in the box below.  How can I fix the problem?

  'The procedure entry point DecodePointer could not be found in KERNEL32.dll dynamic link library '.

  Thank you for your help.

  The other post:

  We get an error "iexplore.exe - point of entry not found in KERNEL32.dll dynamic link library" so he was trying to use internet explore.

  In Firefox, I have automatic updates verified, but for some reason any I do not receive them.  I need all the service packs for Microsoft.

  When I try to use Internet Explorer to connect to the internet, I get a message that says "iexplore.exe - point of entry not found in KERNEL32.dll dynamic link library" How can I fix?  I get a lot of error messages related to the KERNEL32.dll dynamic link library.

  In addition, for some unknown reason, I lost my software of Microsoft - Word, Excel, etc.  I don't have the disc to recharge.

  Thanks for any help.  This kind of thing is frustrating and I really appreciate the availability of Microsoft Answers for assistance.

  Additional post:

  Im trying to update my computer with SP2 and Windows 7.  Even when I try to use I Tunes and do other things that I receive and message entry point (they vary).

  Here are a couple:
  1. the procedure for DecodePointer entry point could not be located in the line of the dynamic library KERNEL32.dll.

  2. the procedure entry point SHRRegGetValueW be found in the library of dynamic links SHLWAPI.dll.

  I have an old computer. Compaq Windows XP - Home Edition, 5.1.

  A month ago I lost my Microsoft Office software. Word and excel... it was all gone.   I have to reload the diskettes of origin provided with this computer which is about 7 years old.

  Is this thing?  I CAN go on the internet and move OK, but I can't download updates, or I Tunes or much else.

  * Original title: do not get the automatic updates.

  http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

  Tom Ferguson

• 'The procedure entry point OpenVxDHandle could not be found in KERNEL32.dll dynamic link library '.

  'The procedure entry point OpenVxDHandle could not be found in KERNEL32.dll dynamic link library '.

  My computer was working fine, now I get this message & no matter what I try, I can't seem to solve the problem.
  If anyone knows how to fix this help please?

  Hello

  1. Once you get this error message? This error occurs when you run a specific program or out of order?
  
  2. What are the steps you tried to solve the problem?
  
  3. have you installed a recent hardware or software before the show?
   
  4. are you able to start the computer on the desk?
   
   
  Method 1:
  
  Step 1: Safe mode
  
  Start your computer in safe mode and check the number.
  
  To start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
  
  Step 2: start Clean
  
  If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.
  
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  
  Note: once you are done with the boot, follow step 7 of article to put your computer to normal startup.
  Method 2:
  
  Perform a SFC scan on your computer. Consult the following link:
  
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
   
   
  
  It will be useful.

• the procedure entry point SymSetSymwithAddr64 could not be found in the dynamic library DBGHELP.dll

  the procedure entry point SymSetSymwithAddr64 could not be found in the dynamic library DBGHELP.dll

  Here's a quick fix, do not guarantee to fix but it's worth it.

  Look for your operating system for dbghelp.dll drive. Check the advanced options, search records system, search for hidden files and folders, and search subfolders. Close programs as much as possible. Make sure the results show one in Windows/system32 and other in Windows\system32\dllcache. Right-click on the Windows /system32 and delete it. Wait a few seconds and the supplementary search. You should see it was added back in the dllcache folder and we're in recycler as the image below...

  NOTE: My Windows is under WINNT. Yours is probably Windows.
  

  Restart the computer and see if the problem goes away.

• The procedure entry point MigrateWinsockConfiguration could not be found in the library of dynamic links MSWSOCK.dll

  Get this message when I start my computer, that is when the sign of Windows in the reception area appears:

  It says netsh.exe - Entry Point not found

  The procedure entry point MigrateWinsockConfiguration could not be found in the library of dynamic links MSWSOCK.dll

  Hey Jay_551,

  I have a good amount of information which I hope will be your answer useful lol.
  For starters, what Anti Virus do you use, the "netsh.exe" has been know to be infected by the virus and be put in a folder by some anti-virus. So I would check that out in your antivirus, I had this info at the following link:
  http://social.Microsoft.com/forums/en-us/msrconferencexpclient/thread/92f50d2c-e7a4-4c16-91ea-06bd59e15f8f
  Also here is the Microsoft article on how to remove the 'Zentcom System Guard", he is recorded as my Microsoft Malware, then read the following link:
  http://www.Microsoft.com/security/portal/threat/encyclopedia/entry.aspx?name=Zentom+system+guard
  Also because it's a common thing for there to be lack of pop - ups after a system file is infected, and removed from the infection, I would review the last link below it. It was created about other missing files, but the situation applies to you:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/entry-point-not-found/66e6caf2-3087-4469-8816-59a19b3033c2

  Let us know the status or if you have any questions after these steps. I hope this has been useful and thanks for the display of Microsoft Answers!

• The "procedure entry point sqlite3_prepare_v2 could not be found in the dynamic link library sqlite3.dll.

  I try to run Rosetta Stone software, however whenever I click on the application link (or shortcut) this annoying message keeps popping up that, according to the "procedure entry point sqlite3_prepare_v2 could not be found in the dynamic link library sqlite3.dll. I studied this before, and there seems to be a problem with Apple/iTunes. But when I deleted iTunes, this question always arises. If there is someone out there or in the it Department which can be useful with this question please help!

  Thank you in advance!

  Hello

  1. are you able to launch the program?

  2. What is the version of iTunes installed on your computer?

  Please follow the methods.

  Method 1:

  Run the Microsoft fixit to uninstall iTunes and check.

  See the link.

  http://support.Microsoft.com/mats/program_install_and_uninstall/

  Method 2:

  Copy the file in the Common Files\Apple\Apple Application Support folder in the Common Apple Mobile Device Support folder and check if it works very well.

• Error Acrobat.exe - point of entry not found the procedure entry point PropVariantToString could not be found in the library of dynamic links Propsys.dll

  When you try to save a file that I changed, the file will not save and I get the following.

  the procedure entry point PropVariantToString could not be found in the library of dynamic links Propsys.dll

  New computer Windows 7, the new standard Acrobat installation.

  How can I fix it?

  Hi koko,.

  This happens with a specific file?

  Have you tried to update Acrobat on the last patch v11.0.09 and verified?

  If it please try to repair Acrobat in the 'Help' menu and check if you still faces questions.

  Kind regards

  Rave

• Update will not work because of missing files or procedure entry point NSS_InitializePRErrorTable could not be located in nssutil3.dll

  After update mozcpp19.dll and mozcrt19.dll files are not in the Firefox directory, and start conversation said that he needs them.
  If I put them in the boot of the not required files but gives an error
  Procedure entry point NSS_InitializePRErrorTable could not be located in nssutil3.dll

  I've just updated to Firefox 10.0.2 and exhibit the same problem of missing dll (Mozcrt19.dll and sqlite3.dll)

  I'm also using ZoneAlarm (but not a version with the virtualization of the browser) and find a comment about ZoneAlarm, I decided to stop ZA and try again Firefox: it starts without a problem.

  So my quick fix (very) is to stop ZA, launch Firefox and restart ZA....

• How to fix the error, "the procedure entry point PK11_PubDerive could not be found in the dynamic link library nss3.dll

  I use windows 7 and Firefox 39.0. Recently, when I open Firefox it gives this error, 'the entrance of procedure point PK11_PubDerive could not be located in the dynamic link library nss3.dll'. I click on the OK button, and then Firefox load without any other side effects. But this becomes quite annoying and I would not get an error message to me. I tried to uninstall Firefox (all the same when I search for it, nothing comes up) and re-install. But the message is still there. I'm lost for what to do to get rid of him. Any help would be great!

  Thank you!

  BlindingFog said

  I use windows 7 and Firefox 39.0. Recently, when I open Firefox it gives this error, 'the entrance of procedure point PK11_PubDerive could not be located in the dynamic link library nss3.dll'. I click on the OK button, and then Firefox load without any other side effects. But this becomes quite annoying and I would not get an error message to me. I tried to uninstall Firefox (all the same when I search for it, nothing comes up) and re-install. But the message is still there. I'm lost for what to do to get rid of him. Any help would be great!

  Thank you!

  I thought about it. I had Cyrstal Reports XI on my machine and when I uninstalled it the error disappeared.

• Error message: the procedure entry point sqlite3_wal_checkpoint could not be found in the librayr of Hotlinks SQLite3.dll.

  Original title: IApple synchronize notifier.exe - not found entry point

  I typed a mistake in my first question.  Here he again the question.

  The procedure entry point sqlite3_wal_checkpoint be found in the librayr of Hotlinks SQLite3.dll.

  I called Apple, but they checked my computer and cannot find any problems with the above, but he always comes back.

  Hello

  1. when exactly you receive this error message?

  2. did you of recent changes on the system?

  Method 1:

  Temporarily disable the antivirus on the computer program and check if it helps. If it works, you may need to check the settings of the program.

  Note: check that you activate your anti-virus protection on the computer back after you complete these steps. It is not recommended to disable these settings on the computer. It's just to solve the problem.

  Method 2:

  You can try to uninstall and reinstall everything produced Apple installed on the system and check if this may help:

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

• Procedure entry point __lc_collate_cp could not be located in MSVCRT.dll and services.exe

  After restarting my computer when you are prompted, I received the following error message
  SERVICES. EXE - NOT FOUND ENTRY POINT

  "" The procedure entry point not found _lc_collate_cp_func in the dynamic library MSVCRT. "." DLL.

  I can't go in front of her and the computer does not start
  Do you have any idea what this might be or how to fix it?

  Hello

  1 how long have you been faced with this problem?
  2 do you have you can all changes on the computer before this problem?

  Try the steps outlined in the article below and check if this help.
  Error message: Procedure Entry Point not found in Msvcrt.dll file
  http://support.Microsoft.com/kb/324762

• NtrigApplet - unable to connect to the driver: failed to open device___TVAgent.exe - Entry Point not found the procedure entry point PowerReadACValue could not be found in the dynamic library POWRPROF.dll

  Hi all

  I have a HP TouchSmart tx2-1025dx Notebook PC Vista... I met 2 large pop-up windows that will not close & appear as soon as I turn on my computer gives me a time DIFFICULT to access anything whatsoever...

  They read as follows:

  NtrigApplet - unable to connect to the driver: failure to open the device

  TVAgent.exe - Entry Point not found the procedure point PowerReadACValue entry is not found in the dynamic library POWRPROF.dll

  CAN SOMEONE PLEASE HELP?
  THANK U :)

  Hi the apprentice 85,

  Remember to make changes to the computer before that happened?

  Looks like the problem is hardware or software related, I suggest you follow the below mentioned steps below to refine the question

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

   

  Step 2: Put the computer to boot to determine which program is causing the problem

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• the procedure entry point MigrateWinstockConfiguration could not be found in the library of dynamic links MSWSOCK.dll

  RPC server is unavailable.    Firewall Windows says "access denied."       won't hold an IP address

  Hello

  • Have you tried the steps mentioned in the previous post?

  If you have not yet tried the steps mentioned in the previous post, I suggest that you try the steps and let us know the result.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  http://support.Microsoft.com/kb/875357

  You cannot start the Windows Firewall service in Windows XP SP2

  http://support.Microsoft.com/kb/920074

• The procedure entry point DnsGetPrimaryDomainName_UTF8 could not be found in the library of dynamic links DNSAPI.dll

  Hello

  I use windows 2008 standard R2, I am missing _msdcs, _tcp, _udp folders from Server DNS. How can I retrieve it?

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 forum.

  http://social.technet.Microsoft.com/forums/en-us/winserverhyperv/threads/