the procedure entry point readerconstname xml text could not be located in dynamic link library libxml2.dll

Similar Questions

• Error 'the procedure entry point xmlTextReaderConstName' not found in the dynamic link library libxml2.dll when you connect to the computer

  Original title:

  I get this pop-up when I connect: 'the procedure entry point not found xmlTextReaderConstName in the dynamic link library libxml2.dll.'  What should I do to fix this?

  Hello

  1. are you able to connect next to this error?

  2. are you aware of any changes made to the computer, before the show?

  Method 1:

  Step 1: Safe Mode

  Start your computer in safe mode and check the number.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Clean boot

  If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you have finished the clean boot procedure, follow step 7 in the article to restore your computer to normal startup.

  Method 2:

  Run a SFC system analysis and control for the issue.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:

  Follow these steps.

  a. open windows Explorer, navigate to the following location:

  For 64-bit.

  C:\Program Files (x 86) \Common Files\Apple\Apple Application Support

  For 32 bit,

  C:\Program Files \Common Files\Apple\Apple Application Support

  b. copy the file "libxml2.dll.

  c. open new windows Explorer, navigate to the following location:

  For 64-bit.

  C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support

  For 32 bit,

  C:\Program Files \Common Files\Apple\Mobile Device Support

  d. Paste the file 'libxml2.dll' at the location.

  e. restart your computer.

  I hope this helps.

• System error "the procedure entry point _SetAsyncTraceParams at (@)" 16 is not found in the library of dynamic links ATRACE. "." DLL.

  Original title: no access to system restore

  After a massive search, I can't solve this problem! Please indicate why this is happening and how to solve it.  Thank you for your support.

  This is the error message pop up that I got trying to activiate (Rstrui.exe) system restore "the procedure entry point _SetAsyncTraceParams at (@) 16 be found in ATRACE dynamic link library. DLL. notice the @ in support should replace 'at' since the seizure of this character created a link to MFL and was confusing to read!

  Hi intelegend,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?

  Method 1

  I suggest that scan you SFC on the computer that would be a corrupt system file search.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Method 2

  If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 3

  If the steps above do not then refer to the article below and check if it helps.

  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP

  http://support.Microsoft.com/kb/302796

• the procedure entry point longimp could not be found in the dll orauts.dll

  I use the oracle 11g R1, on Windows xp sp2 OS.when I wrote sqlplus in start-> run this error came:
  the procedure entry point longimp could not be located in dynamic link library orauts.dll
  
  Earlier which worked fine, but now its display error. How to solve this problem?

  user12222356 wrote:
  I use the oracle 11g R1, on Windows xp sp2 OS.when sqlplus in the early-> run this error, I wrote came:
  the procedure entry point longimp could not be located in dynamic link library orauts.dll

  Earlier which worked fine, but now its display error. How to solve this problem?

  SB,

  This code you ask the OP to execute and test? The error occurs when it is going to start > run and type sqlplus.

  OP,
  There was even a thread about this error,
  Problem at startup of SQL * MORE in oracle database 10g

  According to this, you should check the path of your system settings. There is also a MOS score, but who's not with you I guess since that talk about 10g and issues, according to the note, talk about patching of the db and 10202. But since you're already on 11 GR 1 material, you should be fine.

  Check path settings and try to go into the BIN folder and running the sqlplus a go from there. Post reactions here when you do that.

  HTH
  Aman...

• WordPress the procedure entry point currentprocessEplicicitAppUerModelID, Cauld not found Set in SHELL32.dll dynamic link library

  Hello again people

  I am again asking for help. I installed WordPress and when I try to open it I get the following message is displayed.

  {The procedure entry point currentprocessEplicicitAppUerModelID Set

  Cauld not found in dynamic link SHELL32.dll library.  }

  Why I get this as it seems that my windows program is more corrupt or missing actually a pc of important software I use vista

  Try the WordPress support forum.

• Error number statup topic = the procedure entry point xml name AppleSyncNotifier.exe text reader const could not be located in the dynamic link libxl2.dll

  Original title: sign of problems

  at the start of my system, I get the following, called = AppleSyncNotifier.exe he then continued to say in the dialog = the procedure entry point xml text reader const name could not be located in the dynamic link libxl2.dll, it prevents me from doing whatever it is on the opening page, anyone help? John

  Hello

  AppleSyncNotifier.exe is part of ITunes. To resolve the issue, try the following methods.

  Method 1:

  I suggest that you download and reinstall ITunes since this link provided below to fix the problem.

  http://www.Apple.com/downloads/

  Method 2:

  You can perform the clean boot in order to eliminate the problem.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note:

  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  For further assistance, you can get in touch with support for ITunes.

  https://discussions.Apple.com/community/iTunes?CategoryID=149

• the procedure entry point GetFinalPathNameByHandleW could not be found in KERNEL32.dll dynamic link library

  Hello

  While trying to install a program, I see the following on the screen error message:

  The procedure entry point GetFinalPathNameByHandleW could not be found in KERNEL32.dll dynamic link library

  The I set him, is a Windows XP 32-bit environment.

  The I am installing, is a program, created by my own company, using a 32-bit self-extracting installer, which is also created by my own business using InstallAnywhere Flexera software.

  No changes were made on the environment of the installers.

  No change seems is done on the environment for creating installation programs (where the self-extracting installer is created): I checked the monitor of reliability/Action Center / Control Panel and no entries are present between a job and an installer without work.

  The file 'KERNEL32.dll' is mentioned in the error message, I checked his date of change, which is 11/30/2012, this should not be the cause of the problem either.

  Witnin the self-extracting installation program, a few changes were found, those who are considered at the moment, but there is no indication or not those who are causing the error message I see here.

  Does anyone have an idea what may cause the error message mentioned and how to cope?

  Thank you

  Dominique

  These types of error messages mean that the program is looking "inside" the file specified (in this case kernel32.dll) try to find a function/procedure to run called "GetFinalPathNameByHandleW" and find do not.

  The program calls the non-existent function badly or the library file is not in there.  Things do not match somewhere.

  A DLL is a library of dynamic links and files as kernel32.dll are sometimes just a bunch of procedures/functions/subroutines and all located in a single, portable file.

  In a primitive way, you can use a text editor to open the kernel32.dll file (make a copy if it your desire) and search for a string "GetFinalPathNameByHandleW" and you will not find.

  You can even search for "GetFinal", and you won't find it in the XP kernel32.dll file:

  

  But if you do the same thing on a Windows 7 + kernel32.dll you 'll find:

  

  If your program calls a function inside a DLL, but this feature does not exist in the Windows XP's kernel32.dll file.

  I think that GetFinalPathNameByHandleW was introduced in Windows Vista, so now here you would be fine.

  If who wrote your program is that it works on XP, they need to stick to the functions that are part of XP and GetFinalPathNameByHandleW isn't here, where the error.

• the procedure entry point NSSUTIL_EscapeSize could not be located in the dynamic link library nssutil3.dll

  Windows XP with Firefox 18.0.1 does not open when upgraded to the latest version.
  Error messages have been
  (1) the procedure entry that point pr_setcurrentthreadname could not be located in the dynamic library (2) ndpr4.dll the procedure entry point NSSUTIL_EscapeSize could not be located in the dynamic links (3) library nssutil3.dll was not able to load XPCOM

  A ran malware & anti-virus software then deleted Firefox via Control Panel, then residual file file C:\Documents & Folders\ApplicationData\Mozilla Director and program folder.
  Local & installed products ndpr4.dl and nssutil3.dll - fresh reinstall firefox several times - he got rid of the error message 1 but not 2 or 3 always cannot open Firefox.
  All solutions?

  I have this problem and I use Zone Alarm Extreme Security with Force active field. I found that by turning off the virtual Cache in Zone Alarm that this problem has disappeared and has been able to restart firefox.

  Here is a post I found that addresses the issue in some way. http://KB.mozillazine.org/Browser_will_not_start_up#Firefox_does_not_start_after_updating_with_ZoneAlarm_ForceField_enabled

• get this message at the startup of Firefox 5.0: entry procedure CERT_FindSubjectKeyIDExtension point could not be located in the dynamic link library nss3.dll

  get this message at the startup of Firefox 5.0: entry procedure CERT_FindSubjectKeyIDExtension point could not be located in the dynamic link library nss3.dll

  Hello

  You can try to install the latest version on the current: https://www.mozilla.org/en-US/firefox/new/

• After you install a Foxfire 5.0 update, I get this message when you try to open Mozilla: the procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll.

  I get this message when you try to open Mozilla: the procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll.

  Do a clean reinstall.

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
  • Uninstall your current version of Firefox.
  • Do not remove the data of a personal nature when you uninstall the current version.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data is stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

• 'The procedure entry point DecodePointer could not be found in KERNEL32.dll dynamic link library '.

  ORIGINAL TITLE: How can I fix this please?

  I have an older version of Windows XP (Home edition) Version 5.1.  Trying to get updated with service packs, etc., I get the pop up message in the box below.  How can I fix the problem?

  'The procedure entry point DecodePointer could not be found in KERNEL32.dll dynamic link library '.

  Thank you for your help.

  The other post:

  We get an error "iexplore.exe - point of entry not found in KERNEL32.dll dynamic link library" so he was trying to use internet explore.

  In Firefox, I have automatic updates verified, but for some reason any I do not receive them.  I need all the service packs for Microsoft.

  When I try to use Internet Explorer to connect to the internet, I get a message that says "iexplore.exe - point of entry not found in KERNEL32.dll dynamic link library" How can I fix?  I get a lot of error messages related to the KERNEL32.dll dynamic link library.

  In addition, for some unknown reason, I lost my software of Microsoft - Word, Excel, etc.  I don't have the disc to recharge.

  Thanks for any help.  This kind of thing is frustrating and I really appreciate the availability of Microsoft Answers for assistance.

  Additional post:

  Im trying to update my computer with SP2 and Windows 7.  Even when I try to use I Tunes and do other things that I receive and message entry point (they vary).

  Here are a couple:
  1. the procedure for DecodePointer entry point could not be located in the line of the dynamic library KERNEL32.dll.

  2. the procedure entry point SHRRegGetValueW be found in the library of dynamic links SHLWAPI.dll.

  I have an old computer. Compaq Windows XP - Home Edition, 5.1.

  A month ago I lost my Microsoft Office software. Word and excel... it was all gone.   I have to reload the diskettes of origin provided with this computer which is about 7 years old.

  Is this thing?  I CAN go on the internet and move OK, but I can't download updates, or I Tunes or much else.

  * Original title: do not get the automatic updates.

  http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

  Tom Ferguson

• the procedure entry point SymSetSymwithAddr64 could not be found in the dynamic library DBGHELP.dll

  the procedure entry point SymSetSymwithAddr64 could not be found in the dynamic library DBGHELP.dll

  Here's a quick fix, do not guarantee to fix but it's worth it.

  Look for your operating system for dbghelp.dll drive. Check the advanced options, search records system, search for hidden files and folders, and search subfolders. Close programs as much as possible. Make sure the results show one in Windows/system32 and other in Windows\system32\dllcache. Right-click on the Windows /system32 and delete it. Wait a few seconds and the supplementary search. You should see it was added back in the dllcache folder and we're in recycler as the image below...

  NOTE: My Windows is under WINNT. Yours is probably Windows.
  

  Restart the computer and see if the problem goes away.

• procedure entry point _except_handler4_common could not be located in the dynamic link library msvcrt.dll

  I installed assassin creed III, but when I want to play it game this error:

  procedure entry point _except_handler4_common could not be found in the dynamic link library msvcrt.dll.
  I don't know how can I solve the problem.please help me

  Hi mosi0098,

  Welcome to Microsoft Community where you can find all the answers related to Windows. You get the error message when you try to install the game, try the steps in this article and check:

  Error message: Procedure Entry Point not found in Msvcrt.dll file

  http://support.Microsoft.com/kb/324762

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

• The procedure entry point MigrateWinsockConfiguration could not be found in the library of dynamic links MSWSOCK.dll

  Get this message when I start my computer, that is when the sign of Windows in the reception area appears:

  It says netsh.exe - Entry Point not found

  The procedure entry point MigrateWinsockConfiguration could not be found in the library of dynamic links MSWSOCK.dll

  Hey Jay_551,

  I have a good amount of information which I hope will be your answer useful lol.
  For starters, what Anti Virus do you use, the "netsh.exe" has been know to be infected by the virus and be put in a folder by some anti-virus. So I would check that out in your antivirus, I had this info at the following link:
  http://social.Microsoft.com/forums/en-us/msrconferencexpclient/thread/92f50d2c-e7a4-4c16-91ea-06bd59e15f8f
  Also here is the Microsoft article on how to remove the 'Zentcom System Guard", he is recorded as my Microsoft Malware, then read the following link:
  http://www.Microsoft.com/security/portal/threat/encyclopedia/entry.aspx?name=Zentom+system+guard
  Also because it's a common thing for there to be lack of pop - ups after a system file is infected, and removed from the infection, I would review the last link below it. It was created about other missing files, but the situation applies to you:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/entry-point-not-found/66e6caf2-3087-4469-8816-59a19b3033c2

  Let us know the status or if you have any questions after these steps. I hope this has been useful and thanks for the display of Microsoft Answers!

• the procedure entry point ntalpcsendwaitreceiveport could not located in ntdll.dll error whiel opening programs

  original title: ntdll.dll
  When I run no matter what program to progdvb ouvertede find this problom
  the procedure entry point ntalpcsendwaitreceiveport could not be located in the dynamic link library ntdll.dll

  Hello

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747