The product key you entered will not work with this edition of Windows Vista. You must run the Windows Vista Setup program or enter a Windows Vista business product key

Similar Questions

• "The product key you entered will not work with this edition of windows vista. You must run the windows vista Setup program or enter a windows vista product key. »

  I bought a laptop HP three years ago in Dubai, now I am in India, my family problem does not activate windows vista and also use it now, I try to use but asked the system to activate product key not found the product key at the bottom of my laptop I enter the product key but the system says "the product key you entered will not work with this edition of windows vista.»  You must run the windows vista Setup program or enter a windows vista product key. "In my company sticker a HP laptop, it says" Windows Vista Home Premium, also found in computer ownership 'Windows Vista Ultimate' and as low property said: you must activate today and return their product ID: 89580-014-0000025-71152, but in my laptop near the product key, wrote a different number which is "89580-014-0000025." what is the problem and how to solve that advice me please. ""

  Hello

  You can use this Recovery Partition to reinstall Vista to his new condition with the right edition of Vista.

  This recovery partition was photographed on your hard drive by HP during the manufacturing of the factory.

  You press F11 on startup to start the process of recovering back to factory settings.

  Here is the information about HP.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703

  If the recovery partition is damaged, you can buy HP's Vista recovery discs for a small fee.

  If HP's Vista recovery disks, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon

• The product key you entered will not work with this edition of windows 7.

  Hi, I see that it is a common problem when upgrading to XP.  In my case, I have a version update of win 7 I installed XP on top.  I just read the advice from one of your superiors to support people and realized that my problem could be that I have not installed upgrading while XP is running.  Instead, I booted from the CD to upgrade and installed from there.  I selected custom, but did not format.  I install the 64 bit version.  I finished the installation, but the product key on the box of win7 has not been accepted.  How can I fix this problem without reinstallation of XP and then upgrade to win 7 again?  Help, please.  Thanks, Deb

  How to activate Windows 7 manually
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone and wait for someone to help you with the activation. (Explain your problem to upgrade to the person)

  Also:
  How to activate Windows 7 by phone
  http://support.Microsoft.com/default.aspx/KB/950929/en=us
  http://www.SevenForums.com/tutorials/18715-activate-Windows-7-phone.html

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  Product Activation Solution Center
  http://support.Microsoft.com/contactus/cu_sc_prodact_master

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• "The product key does not work with this edition of Windows 7", but I have not changed anything

  Suddenly this week 7 Windows has stopped working and the error message said I might have a non-genuine copy, etc.   I checked the product key by using the Start/computer/properties menu. The product key was not the same as on my PC, so I tried to get the right version. Then I got the error message that you have entered the product key will not work with this edition of Windows 7, and I want to run Windows 7 set up or enter a professional product key.

  I saw that someone else had been advised to run MGADiag.exe so I've already did but am puzzled by the report.  And I'm worried, why me nice Acer desktop PC suddenly did that, when he had worked happily with normal updates etc.  The report shows a different product to the label of my PC key.

  Can someone help, please

  Thank you

  Andrea

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 50
  Code of Validation caching online: 0xc004c4a2
  Windows product key: *-* - FCTV3 - P9RTC-F9C3D
  The Windows Product Key hash: G7PayGi + xFabXK4wlLkFbNDozpA =
  Windows product ID: 00371-619-5427791-85058
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {AC5B74A9-0098-41DC-ACF4-BD8449D66609} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.140706 - 1506
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: B4D0AA8B-604-645_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: allowed
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {AC5B74A9-0098-41DC-ACF4-BD8449D66609}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-F9C3D00371-619-5427791-850585S-1-5-21-1356999665-2362789505-4127209914AcerAspire X 3812FRIENDP01-A020090816000000.000000 + 0007A043C07018400F808090409GMT Standard Time(GMT+00:00)03ACRSYSACRPRDCT109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, retail channel
  Activation ID: e838d943-63ed-4a0b-9fb1-47152908acc9
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00170-619-542779-01-2057-7601.0000-2042014
  Installation ID: 007595347832785135952380495674625140911753099524272431
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: F9C3D
  License status: Notification
  Reason for the notification: 0xC004F200 (non-genuine).
  Remaining Windows rearm count: 3
  Trust time: 02/11/2014-18:36:20

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0xC004C4A2
  Beyond: 0 x 0000000000000000
  Event timestamp: 11:1:2014 20:45
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: LAAAAAEAAQABAAIAAAABAAAAAQABAAEA6GEkRoSxVFESavzCioZogPYoTFg =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC1457 APIC 081609
  FACP 081609 FACP1457
  HPET OEMHPET 081609
  MCFG 081609 OEMMCFG
  SLIC ACRSYS ACRPRDCT
  081609 OEMB1457 LASRYVITRAGE
  GSCI 081609 GMCHSCI
  AWMI 081609 OEMB1457
  SSDT DpgPmm CpuPm

  Moved from programs for Windows 7 Forum.

  Code of Validation caching online: 0xc004c4a2

  Your product key is blocked. suggest you try to activate by phone, they may be able to help you enter the product key on your sticker or say why it is blocked.

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) to select your "country" you are in the drop-down list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  J W Stuart: http://www.pagestart.com

• The product key you entered will not work with this version of windows

  I have a product key for windows 7 Professional n but I used a professional installation usually windows disc 7 and now my windows 7 wont turn on I get the message "the product key you entered will not work with this version of windows. Any ideas how to solve this problem?

  Seanhough

  You may be stuck re - install the version you have the key for or by purchasing a key for the version that you have installed.

• network variable will not work with VBAI 2010 and windows 7

  Hello

  In fact, I have a problem with 2 EVS-1464 (windows 7) and VBAI 2010.

  I have to use network variables to allow the communication between two electric vehicles, but I can't use it. My network is ok (I can ping between the two facilities) but I can't (t access the network variable.

  I did a test with VBAI2011 EVS / VBAI2010 PC windows XP--> it works. (but I don't want to use VBAI 2011).

  You have solutions to solve my problem?

  Thank you

  Ulysses

  Hello

  Here are several documents that might be useful for you:

  Using the LabVIEW shared Variable

  Troubleshooting network-published static Variables

  How can I use shared Variables to transfer data from Vision Builder for Automated Inspection (VBAI)...

  You can also try something. To do this, you must go to the EXE VBAI here:

  For 32-bit machines:
  C:\Program NIUninstaller Instruments\Vision 20XX\ VBAI

  For 64-bit machines:
  C:\Program Files (x 86) \National Instruments\Vision VBAI 20XX\

  Right-click on "Vision Builder.exe", and then select Properties.  Make sure "run this program as an administrator" is checked.

  Click OK, and then try to rerun VBAI. You may need to redeploy the variables in the variable Manager until they work properly.

  Kind regards

• The tablet of Microsoft Surface will not work with my printer HP Photosmart 5510 current wireless?

  I need to get a new laptop as my only current becomes slow and unresponsive, so I thought I'd do a Microsoft Surface tablet when they become available. I only bought my printer a couple of months, and it would really be a guy, if it was not compatible with the Surface.

  Also, I downloaded the Windows 8 Preview of consumers, and in trying to connect my printer, it wouldn't install because it did not support the operating system, telling me to make sure I was using XP or Win 7. After a few weeks, I returned to windows 7. Does this mean that my printer will not work with any version of Windows 8, either on a tablet or PC?
  I thank in advance.

  HP alone are responsible for the support of pilot and he will be at their discretion. If it is a very recent model, HP will probably out drivers more or less at the same time as Windows 8 in fact for the shelves of stores...

• Windows xp oem product key will not work with a generic copy of xp family. How can I make it work?

  This HP model is: Pavilion a530e.  It crashed and the original CD is not on this earth.  I installed a generic copy of Windows XP Edition family (the same as the original OS, but different SP level).  I left the empty product key because it would not of him who is on the side of the CPU!  How to fix this?  I have access to the internet and to do automatic updates, but the Microsoft Authentication in Windows Update Web site has not been made.  Help, please!

  The OEM key on the side of your Tower will not work with the XP cd to retail. You need a manufacturer OEM copy such as comes with some Dell, gateway machines.

  You can get the recovery disks that don't require any key to activate it. HP can carry is no longer, but they are available here. Just put your model number in the search:

  http://www.computersurgeons.com/

• New version will not work with the yahoo toolbar. How can I solve this problem?

  I downloaded the new version of Firefox, and it will not work with my yahoo toolbar more. It worked fine until I updated to the new version. I went back to the old version 16.0 and now he repeats to me my version is obsolete. How can I solve this problem and get the new version to work with my yahoo toolbar?

  To start, make sure you have the latest Yahoo toolbar.
  http://help.Yahoo.com/kb/index?page=content & y = PROD_TOOL & local = en_CA & ID = SLN5044 & print = false

• Message "this application will not work in this operating system" at the start.

  Original title: this application will not work in this operating system

  After starting, I get this error message:

  Stop: this application will not work in this operating system

  What application is this? How can I fix? I am running XP SP3

  CZFMDXPK c:\program files\fdd + fever disease combo reader\czfmdxpk.exe a the culpit. The problem is resolved and no Malware found. eventvwr helped me identify other problems, and now I'm curious on how to disable the stubborn programs in msconfig. I'll get.

  You did a great job and thank you very much. Have a beautiful weekend. Rainer

• Microsoft LifeChat LX-3000 will not work with the yahoo chat

  Microsoft LifeChat LX-3000 will not work with the chat of yahoo, but works very well for the team talk and evacuate the systems of conversation, but for some reason he saus that's compatible with windows Word 7 and he rejects as a microphone?

  "Wyodragon" wrote in message News: * e-mail address is removed from the privacy *...

  Microsoft LifeChat LX-3000 will not work with the chat of yahoo, but works very well for the team talk and evacuate the systems of conversation, but for some reason he saus that's compatible with windows Word 7 and he rejects as a microphone?

  The LX-3000 is compatible Windows 7... get the driver from the website of Microsoft Hardware...
   
  http://www.Microsoft.com/hardware/
   
  When you have installed the drivers, open Yahoo Messenger, go to help > configure video and voice...
  
  --

  Mike Hall
  http://msmvps.com/blogs/mikehall/

  Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

• 13 elements will not work with the new camera, it will not be updated raw 8.7.1

  13 elements will not work with the new camera, it will not be updated raw 8.7.1. I downloaded the patch, installed, but the old version is it in elements. Thank you, esther

  Try again a little later. Sometimes the Adobe servers are busy. If you get the same answer, you may need to uninstall and reinstall. Try an alternative link, then confirm with your 24-digit serial number - click here to download PES

• Photoshop CS2 will not work with RAW images in the Minolta DimAge A2.  It allows to work properly

  I used Photoshop CS 2 with my DimAge A2 for 5 years in the RAW format.  Now it will not work with RAW with my camera.  I'm using Vista 64.eu all the answers?  Thank you

  It seems to me that you probably had to reinstall Photoshop CS 2.  If this is the case, then, you must download and install Camera Raw 3.7.  The version that was on your installation disc has been updated several times.  And one of these probably included updates support for your camera.  Install RTAs 3.7 and see if that helps.

• have the latest version of Firefox and I like the new tab feature will not work with my version 13.0. 1

  I recently upgraded to Firefox 13.0.1 and received the email touting the new thumbnail feature of the tab, the only problem is when I try to download the new feature, I get an error message indicating that my version of Firefox is outdated and the thumbnail of the tab will not work with her and to upgrade.

  Each as indicated, but it only opened a new tab with no thumbnails again.
  So I'm puzzled as to why it does not work and my Firefox does not show Windows or Firefox 13 in the right sidebar below.

• FN F6 and F7 for less bright and shiny LCD will not work with XP on A305-S6845

  modules common to xp... not on this model...

  added value for xp... not on this model...

  FN F6 and F7 for less bright and shiny LCD will not work with XP on A305-S6845

  C2D t8100, chipset intel, no normal fn keys FN + F5 doesn't seem to operate 'naturally', as do some others that I don't use, but the idea that I spent 8 hours to find all the xp drivers for this thing and can NOT dim my lcd...! ******ed...!!!

  The Toshiba REAL will raise your hand... Please?

  you KNOW millions are without downgrading from vista to xp, GIVE US THE DRIVERS...!

  I had to just to get the rest, scout intel boooted to viata while just to get the wifi, then start on xp, install the wifi, then had to get drivermax (amazing) to find all the drivers

  but no one knows where the FN drivers (no pun intended...)!

  None of the drivers Vista FN will get them to work with XP

  XP drivers for other models will not be installed on this model

  It comes from * ed

  1200 for a machine that cannot dim the lcd...!

  It is unlinke toshiba, how long could possibly take something for xp on to the A305 recompile!

  If someone has an A305 with c2d, get drivermax, they have now all other drivers of my job of paving 99.999% perfect...

  I will also publish on 4shared.com in a massive zip...

  Ok

  Send me a fix...!

  (too late for a refund...!)

  TOSHIBA! everything I own is TOSHIBA... !!! three laptops from toshiba... just give my xp for my A305 drivers...!

  If you come from the United States, I'm afraid, you're on the wrong place. Try to post the same thing on http://community.compuserve.com/n/pfx/forum.aspx?webtag=ws-laptop&redirCnt=1 it's US forum.

  Here are mostly from Europe and Toshiba Europe has nothing to do with Toshiba WE. The company, but may be different marketing strategy and support.
  Maybe you'll find people with the same opinion.

  > 1200 for a machine that cannot dim the lcd...!
  I take you seriously with your opinion, but after reading this, I think that this comment has nothing to do with reality. Recovery of installation image and you'll have the complete functionality for laptop. You have the stick of Windows Vista on your laptop?