the program cannot start because AegisE2.dll appears during startup

Similar Questions

• test of strength of dirt the program cannot start because OpenAL32.dll is missing

  test of strength of dirt the program cannot start because OpenAL32.dll is missing

  Hello

  Did you change your computer before this problem?

  You can follow the suggestions and check out them.

  Method 1

  Check to see if the problem exists in a clean boot state.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: after you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  a.Click Startand then click run.

  b.Type msconfig and then click OK.
  The System Configuration utility dialog box appears.

  c the general tab, click Normal Startup - load all device drivers and services, and then click OK.

  d.When you are prompted, click restart to restart the computer.

  Method 2

  If the problem exists, you can uninstall and reinstall the program.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Note: Make sure you have the installationd disk before you uninstall the program

  See also:

  How to manually remove programs from the add tool / remove programs

  http://support.Microsoft.com/kb/314481

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

• The program cannot start because MSVCR110.dll is missing on your computer.

  HP Pavilion g7-2235 dx notebook PC.

  USB ports not working do not.

  Not installed Adobe Reader.

  The program cannot start because MSVCR110.dll is missing on your computer.

  Try reinstalling to resolve this problem.

  Reinstallation does not work.

  Any ideas anyone?

  Thank you.

  There are three files to download.

  vcredist_arm.exe

  Vcredist_x86.exe

  VCRedist_x64.exe

  Should I try any or all of them?

  Thanks a lot again.

• The program cannot start because MSVCR80.dll is missing on your computer. Try reinstalling the program to fix this problem. Where can I get this program?

  Pop Up-

  The program cannot start because MSVCR80.dll is missing on your computer.

  Your response-
  Try reinstalling the program to fix this problem.
  Question-
  Where can I get this program to download?

  Hello

  If the problem is with iTunes, uninstall everything according to the instructions from Apple:

  «Remove and reinstall iTunes, QuickTime, and other software components for XP»

  http://support.Apple.com/kb/ht1925

  It is also the same list of what to remove what is in the link above from Apple:

  http://pcsupport.about.com/od/findbyerrormessage/a/MSVCR80-DLL-not-found-missing-error.htm

  Or try this program to remove it:

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  "Resolution of problems with iTunes for Windows Update"

  https://discussions.Apple.com/docs/doc-6562

  If the advice already given does not, please contact Apple for assistance.

  "Not to install iTunes or QuickTime for Windows"

  http://support.Apple.com/kb/HT1926

  "iTunes support-how to use iTunes.

  http://www.Apple.com/support/iTunes/

  "Contact iTunes Support.

  http://www.Apple.com/support/iTunes/contact/

  Or ask in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

  ____________________________________________

  If the problem is not with iTunes, there is other information about this error on the link pcsupport.

  See you soon.

• [Trying to open the computer management] The program cannot start because MSVCR100.dll is missing from your computer. Try reinstalling the program to fix this problem.

  The program cannot start because MSVCR100.dll is missing from your computer. Try reinstalling the program to fix this problem.

  I get following error when I try to open the computer management in windows 7, the error is as follows.

  The program cannot start because MSVCR100.dll is missing from your computer. Try reinstalling the program to fix this problem.

  Where can I find this dll file and help me to download and install.

  I'd install the Microsoft Visual C++ Redistributable dll, which is necessary for the projects generated with Visual Studio 2010.

  Download the files below according to your operating system version. I would setup versions because they may be needed for different programs. Check in programs and features, you show that you have installed Microsoft Visual C++ 2005 Redistributable and Microsoft Visual C++ 2008 Redistributable? If this is not the case, download the links here.
   
  Package redistributable Visual C++ 2005 (X 86)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=32BC1BEE-A3F9-4C13-9C99-220B62A191EE&displaylang=en
   
  Visual C++ 2005 (x 64) redistributable package manager
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=eb4ebe2d-33c0-4A47-9dd4-b9a6d7bd44da&displaylang=en

  Package redistributable Microsoft Visual C++ 2008 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=en

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 64)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

  Package redistributable Microsoft Visual C++ 2010 (x 86)
  http://www.Microsoft.com/download/en/details.aspx?ID=5555

  Package redistributable Microsoft Visual C++ 2010 (x 64)
  http://www.Microsoft.com/download/en/details.aspx?ID=14632

  Thank you

  Marilyn

• HP Photosamart Premium: the program cannot start because hpqcutil.dll is missing

  I've had my printer for quite awhile.  Recently I had to download as because wireless USB port would not work.  I've used it since, but yesterday, I changed two cartridges.  Once I tried scanning photo and save it I got the message: the program cannot start because hpqcutil.dll is missing from the computer.  Try reinstalling the program to fix the problem.

  I reinstalled again today and still get the same message.  How do I now please?

  HP Photosmart Premium 309

  Lyn

  PS my system is Windows 7.  32-bit.

  You don't need the installation disc at all. Discover the second option in my last post, where you can download the airline pilot, I posted for you as well. Once the download is complete, installation begins, for now, cancel the installation and start following the steps in the second part of my last post, and that will help you perform the uninstall of level 3.

  Good luck

• The program cannot start because MSVCR80.dll is missing on your computer. Try reinstalling the program to fix the problem.

  This came after I installed an iTunes update and wouldn't let me open iTunes.

  This comes first when I clicked to open iTunes:

  The program cannot start because MSVCR80.dll is missing on your computer. Try reinstalling the program to fix the problem.

  Then this happens after I crossed the first window that displays the above message.

  iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126).

  What does that mean? Why is he doing this? How can I solve this problem? I almost lost all my music, so can't do nothing about it, but why iTunes no longer works?

  Hello Geordie,

  This is probably due to a bad iTunes update. I recommend you to please refer to the http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/error-message-missing-msvcr80dll-when-trying-to/c8b05024-c4bc-4d14-87ef-4dcbb51c8c97?page=1&tm=1390761398091 thread and an update on the status of the issue.

• The program cannot start because LibMySQL.dll is missing on your computer, try reinstalling the program to fix this problem, it is displayed as error on my desk.

  Original title: Mysql Libmysql Dll error correction

  The program cannot start because LibMySQL. dll is missing from your computer, try reinstalling the program to fix this problem, it is displayed as error on my desk. LibMySQL. dll is C:\Windows\System32, but I can't run the .exe file, I want to run, I can to do, how to fix this problem automatically, I have Windows7 64-bit machine, computer laptop lenovo T530

  Thank you!

  I solved this problem, I put this file LibMySQL. dll to the folder where the .exe file is, I want to run. Exe file, I want to run, cannot call LibMySQL. DLL in C:\Windows\System32,that is the question, I found on a forum suggestion what I have to do

• When I turn on my computer, he told me that the program cannot start because ash.dll base is not available in my PC.how I can solve it this issue.

  Thank you for allowing me to ask my question.

  My question is about the message poster on my PC window indicating that the program cannot start because ash.dll base is missing in my PC.

  So how I can solve this issue.

  This program is for AVAST ANTIVIRUS

  Ash.dll is usually associated with an infection.

  Install/run these two free utilities

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  http://www.Malwarebytes.org/products/malwarebytes_free/

  It could also be the case that Avast detected & removed the infection but left a remnent, this being the case closely check the entries in the msconfig Startup tab

• The program cannot start because d3dx9_26.dll is missing on your computer. Try reinstalling the program to fix this problem.

  exe. No installation program/game type laptop problem opening bed following error message in the title - the program cannot start because d3dx9_26.dll is missing on your computer. Try reinstalling the program to fix this problem. WHAT CAN I DO TO GET THIS WORKING ON MY PROGRAM WINDOWS 7! Help, please?

  Install the latest DirectX Runtime:

  End-user Runtime Web install DirectX

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=2da43d38-DB71-4C1B-bc6a-9b6652cd92a3&displaylang=en

  Use DirectX Runtimes (June 2010)

  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=3b170b25-ABAB-4BC3-ae91-50ceb6d8fa8d

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• The program cannot start because d3dx9_24.dll is missing on your computer. Try reinstalling the program to fix this problem

  Game.exe - system error
  The program cannot start because d3dx9_24.dll is missing on your computer. Try reinstalling the program to fix this problem.

  Download and install DX9:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=35

• Error of World Of Tanks: the program cannot start because d3dx9_43.dll is missing on your computer.

  Original title:

  After the download problem

  I tried to play on World Of Tanks on my laptop Windows 8 and he says: the program cannot start because d3dx9_43.dll is missing on your computer.

  So I did some research, and Microsoft told me that I had to install the DirectX program. After I installed the DirectX software and tried to run, he gave me the following message is displayed: a necessary .cab file for installation is not reliable. Please check Cryptographic Services are enabled and the certificate file is valid.

  I don't know what to do to solve this problem.

  Hello Joseph,.

  Thanks for posting your query in Microsoft Community.

  I understand that you have any questions, by playing the game World of Tanks in Windows 8. We will certainly help you with the same.

  You can read the steps below for the game of automatic encryption Services Cryptography on AutoServices and then try to install the program again. To set the cryptographic on AutoServices, follow these steps:

  1. Start the Administrative Tools utility in control Panel.
  2. Double-click Services.
  3. Click Cryptographic Services, and then click Properties.
  4. Click Automatic for Startup type, and then click Start.

  Then install the latest version of DirectX for Windows 8 and see if that helps.

  How to install the latest version of DirectX

  http://support.Microsoft.com/kb/179113

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

• The program cannot start because msvcr110.dll is missing

  This error message on the picture continues to show up on my computer. Once I hit OK, I can't continue to work. I've worked the steps detailed here:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-Winapps/the-program-cant-start-because-msvcr110dll-is/f052d325-3af9-4ae5-990b-b080799724db

  by installing Microsoft Visual C++ Redistributable 2012 but I still get the pop up error.

  Make sure you have the right number of bits: 32 or 64.

  If you have a 64 bit system, 32 or 64 redistributable may be required.

  If you have a 32-bit system, only the 32-bit redistributable work.

  Visual C++ Redistributable for Visual Studio 2012 update 4

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30679

  Visual C++ Redistributable for Visual Studio 2015

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=48145

  See also:

  The most recent support for Visual C++ downloads

  http://support.Microsoft.com/en-us/KB/2977003

• The program cannot start because MSVCR110.dll is missing on your computer. Try reinstalling the program to fix this problem - Windows 7

  Hello

  I installed a program in Windows 7 and I can't start it because it appears: "the program can't start because MSVCR110.dll is missing on your computer. Try reinstalling the program to fix this problem. I looked for answers and I found that I can install this http://www.microsoft.com/en-us/download/details.aspx?id=30679# (Visual C++ Redistributable Packages). In this connection, there are 3 files to download: VSU_4\vcredist_x64.exe, VSU_4\vcredist_x86.exe and VSU4\vcredist_arm.exe. My question is which file should I download or if I have to download each of them. How can I know which one I need to upload?

  Can someone help me please?

  Thank you

  Sebastian.

  VCRedist_x64 is for 64-bit systems.

  Vcredist_x86 is for 32-bit systems.

  If you are running Windows 7 32 bit, just install the x 86 version.  If you have Windows 7 64-bit, you may need to install the x 64 and x 86 version. First try the x 64. I f it does not work, install the x 86 version as well.

  vcredist_arm.exe is for devices using ARM processors which are compressed as the Microsoft Surface.

• Error - the program cannot start because MF.dll is missing on your computer in Windows Live Movie Maker.

  Original title: problems with Windows Live Movie Maker.

  I've had my laptop recently wiped and I installed all the drivers needed and antivirus. I have Windows Live Movie Maker on my laptop previously. But when I tried to download Windows Live Movie Maker it does not work. (about 7 times now.) Works fine Windows Live Photo Gallery PERFECTLY every time. but the Windows Live Movie Maker does not work.
  He used to have the error
  "Director of Windows cannot start because WMVCORE." DLL is missing from your computer. »

  I recently fixed this error. Now, he's saying,
  "The program can't start because MF.dll is missing on your computer."

  I've tried EVERYTHING.
  Download updates windows, reinstall (several times over a period of a long week.) and the package of refreshment, that NEVER ends and just said that it cannot continue. (He said it'll take 15 hours to install in the first place)

  Is there something that I am missing?
  Please help me. I need it for my business.

  Hi BrookeSmith,

  When you face issue in Windows Live Movie Maker, I recommend that you post your question in Windows Live Solution Center for assistance.

  http://www.windowslivehelp.com/

  Hope the helps of information.