Similar Questions

• OfficeJet Pro X451dw (CN463A): updated the Firmware says X451dw "EC Firmware Updater does not contain updates for your device."

  I'm trying to update the firmware on my HP Officejet Pro X451dw (CN463A), but the firmware update fails with the error "This Firmware Updater does not contain updates for your device." More precisely:

  1. With the help of EWS, I confirmed that my current firmware is very old (it lists the firmware version of BWP1CN1315FR, which means 1315FR, right?, dating almost the time I bought the printer about 3 years ago).
  2. I downloaded the firmware ("OJP_X451dw_R1640A_updated.dmg") was last updated, copied 'HP Firmware Updater' in /Applications and then he ran.
  3. It shows my printer in the Device Discovery list. I selected and clicked on continue.
  4. He thinks for a while, displaying "recovery information...". »
  5. After a wait of 30 seconds (approx.), it displays "EC Firmware Updater does not contain updates for your device."

  Any suggestions?

  You're welcome @justkwin.

  Here is the utility of a Mac computer:

  FTP://g4u0180.Houston.HP.com/FTP4/pub/softlib/software13/printers/pentane/OJP_X451dw_R1548A.dmg

  Kind regards

  Shlomi

• The service "wuauserv" (automatic updates) does not work correctly

  The service 'wuauserv' uses constantly between 88 and 95% of my CPU, slowing down my computer to the point that it is almost unusable, so I've been suspending or disabling the process 'wuauserv' every time I use my computer.

  In addition, Windows Update does not, if "wuauserv" is suspended or not.
  It prevents just check the latest updates and never stops to do that no matter how long wait.

  Well, I managed to solve the problem.

  I followed the instructions on this page: http://workingscripts.blogspot.com/2008/05/windows-update-high-cpu-usage-fix.html

  Immediately after that, Windows Update and the automatic updates service finally started working again. It has been almost two weeks since I fixed it and have not had a problem since.

  I didn't format the hard drive and do a clean install of Windows XP for this problem - I have never done this because it does not seem necessary.

  And I do not see how this relatively recent automatic updates problem never touched my other problem Installation of Internet Explorer years discussed in my other thread.

• Device not recognized - the firmware update does not work

  I opened my package and am trying to get up and running.

  I have a 5 or 6 year, PC - computer Dell Pentium 1.8 ghz running Windows XP - SP 3 and Windows Media Player version 11.

  Plug in my Fuze v02.01.09A - I get a peripheral grateful error

  When I in MSC - my computer does not recognize device

  If I try to run the Sansa update - I get an error message

  "' The following error has occurred: *.

  Your device is in MTP mode (which is not the case).  It can only be updated in MSC mode.  Please disconnect your device and switch to MSC mode if you want to check the updates.

  *****************************************************

  If I go to device MTP - my computer recognizes that I have material foundNew and wants to use the hardware installation CD.  I put in the Rapsody CD that came with my computer and ask Windows to search for the installation of the equipment.  Install a window of Wizzard opens looking software flashing I have an MTP device is plugged in and I see the files to move via photo of 2 folders with files to move files from one folder to another.

  Followed by an error message

  that there was a problem installing this hardware.

  MTP device

  Teh device cannot start - (Code 10)

  Click Finish to launch a troubleshooting tool that can help you solve the problem

  *******

  Next, I get a window all over again.

  This day - the only thing I could do is get a few FM stations with a fairly weak signal.  The sound quality is good - but right now I have a $80.00 hockey puck who isn't even the right shape.

  -In addition, the unit had a load of 3/4 out of the box - and I've not been able to get the charge up at all - after be plugged for 2 hours to a USB port on the back of the computer.  I saw the bar to drop slightly to 10 minutes of FM radio listening.

  You have access to another computer? Try it may be your USB media. Try changing the USB ports on your pc. If its 5-6 years, you can have a port goes wrong.

• E260 keeps restarting, firmware update does not help

  Hey everybody

  So I'm trying to fix my Sansa e260 friends and I'll get in trouble. When you turn it on, it just continuously restarts itself, I've included a video of what he does. http://Tinypic.com/r/2wq78jp/6

  I have already searched through this forum and tried the firmware update, after the update exactly the same thing just keep to themselves. I don't know where to go from here, any help would be appreciated. Thank you!

  Formatting the device using the Recovery Mode.  This erases all the materials for the device, but it's locked up in any case.

  For this procedure, first of all we have this word from our sponsor:

  In Recovery Mode, do not USE NOT THE COMMAND FORMAT WINDOWS ON THE PARTITION RESERVED.  Use the trick of ONLY sansa.fmt folder!

  Well, here are the steps (features of version 1 only):

  • Start with your OFF e200.
  • Slide the HOLD switch to the right (orange list).
  • Open a Windows Explorer on your PC.  Use my computer or [Windows key] + E.
  • Press and hold the REC button on your e200 while plugging in the USB cable.
  • The Sansa will specify "Welcome to Recovery Mode, type MSD."
  • On the PC, you will see a new device labeled 16 MB FORMAT.
  • Double-click this icon to open the reserved partition.  Yet once, DO NOT format using the available Windows command!
  • Right-click in this partition and select new folder.
  • Rename it sansa.fmt folder and you're ready!
  • With the help of remove it safely function (icon at the bottom of your screen in the taskbar), eject the Sansa.
  • Slide the HOLD switch to the left.
  • Try turning your restored e200 once she gets in shape automatically.

  Let us know how it goes!

  Bob

• WRT350N firmware update does not

  Hi, I just got a unused WRT350N router.

  I had a few problems getting the installer on my MAC (OSX 10.5.6), but it turns out that they have problems using Firefox have been resolved when I started using Safari. However, I still have a problem unsettled with the upgrade of the firmware...

  I want to upgrade the firmware the 2.0.10 original to the most recent available from 2.0.19. I downloaded this on the support page, which gives me a text from the Readme file and a. IMG file which I assume is the firmware file (all the instructions I found imply there should be one.) BIN file)

  I connected my router to the MAC using a wired connection and followed the instructions to upgrade the firmware (using the.) IMG file), followed the steps of rest (including using the hardware reset button and the option of software factory default values), but when the router comes back to the top still says its firmware 2.0.10.

  I don't get any error message and have noticed that at the end of the upgrade it does NOT display the «update is successful, restart...» "message.

  I have lived this several times with the same results. Any ideas please?

  I thank in advance.

  Don't worry have solved it myself!

  I printed off manual and found an obscure reference to Web pages only work with IE and Netscape and so given my previous issues with Firefox I looked up an old install of Netscape and hey presto the update worked first - didn't even have to reset the router! :-)

  I hope can be useful to someone else at somepoint.

  PS. I know this is a 'reasonably' old router by today's standards, but I question what type of programming is sitting behind the pages that it only works with IE & Netscape! I realize that you cannot predict what are the browsers will be used in the future, but come on!

• Thunderbolt Display Firmware update could not complete.

  Hello.

  Am myself a brand new Mac Pro recently and I'm loving it. Hooked up to my old TB screen which is unused to cause a few months the all-in-one cable is broken. Not much, I bought a cable TB, and used only to plug it in and it works fine.

  That is, until I went in the App Store and noticed a firmware update for display among all other system updated. I do not think that anything of it in time and just continued to download and install all updates in bulk. Well, after all has been said and done I got the popup saying he could not apply the on-screen since it must route the cable all-in-one to do. Not a problem, I thought, it's not that important to me it is installed. But now after whenever I restart the machine, I get the annoying popup even in my face, no matter what I try to do to remove it. I'm fine with not getting updated, I just want this bitch popup go away!

  I am a very advanced user, so I am not against the orders of terminals and/or editing plists performer or that you have to solve this problem. I don't know where to look and I thought this would be my last ditch effort fixing before you say screw it, wipe the system and start over. If no preview of this would be useful. Thank you.

  Apple doc:

  Thunderbolt Firmware Update 1.2: continues to reappear and Thunderbolt ports and target Display Mode may not work

  After the installation of Thunderbolt Firmware Update 1.2:

  • The Thunderbolt ports may not work.
  • Target display mode may not work.
  • The update can keep reappearing as available for download.

  This happens when one Thunderbolt self-powered (other than one directly connected Thunderbolt display) device is connected to a Thunderbolt port during the installation of the update. To resolve this problem:

  1. Shut down your computer.
  2. Disconnect all devices Thunderbolt.
  3. Wait for 10 seconds.
  4. If you use a Mac mini with a Thunderbolt screen, reconnect the Thunderbolt display directly to your computer via the Thunderbolt port. Do not connect other devices Thunderbolt at the moment.
  5. Restart your computer.
  6. If sight Firmware 1.2 update is available, download and install and restart your computer when asked. If the update of Thunderbolt is not available, the update has been successfully installed.
  7. Reconnect all devices Thunderbolt.

• HP P2055dn Laser printer. Firmware update does not work.

  HP P2055dn Laser printer. Win 7-64. USB is connected. Download the appropriate firmware update, ljp2055dn_FW_Update_20120131.exe. Running the file. Select the printer in the dialog box. Printer has been powered up and ready. Bar showed progress update was sent to the printer and concluded successfully, with a smiling face in the dialog box. However, printer doesn't react at all, just keep to indicate loan. When the Self Test / Configuration page, it always shows firmware like 20111214.

  Printer works fine. The update is supposed to fix a security hole.

  Found the answer on the support page for businesses. Buried in the Menu of configuration, to the terms of Service, the last menu item is RFU. This determines if the firmware can be updated. The default value is OFF and LOCKED. It must be put on updating the firmware. After update, it will automatically return to CLOSED and LOCKED.

  It would have been nice if HP put it in the manual, rather than trying to pay $35 for the support of something that should have been documented. Must be a secret or maybe I'm the only person who didn't know what that meant the RFU.

• Windows 8 update does not complete

  I just opened this machine with Win8 and wanted to update 8.1, but was invited to update Windows Update first.

  I ran the update, which asked me to restart the laptop. I restarted the first time, I went back to the Windows Update screen that asked another reboot. Now around 20 restarts later, I'm looking at the prompt still asking me to restart.

  What is the problem with that? What can I do to fix it please?

  Hi Aditya,

  I understand that you can not upgrade to 8.1 Windows as you cannot install Windows updates.

  As you mentioned that you got the restart option which indicates that updates have been downloaded successfully and then you tried to restart the computer and the option restart Vienna once again.

  It indicates that Windows updates is not installing on the computer.

  To better understand the issue, please send us the following information:

  1. What is the brand and model of the computer?
  2. You get the error message during the installation of Windows updates?

  I suggest you follow the steps below and see if there are updates failed:

  1. Press the Windows key + R
  2. Type wuapp
  3. Click view update history

  You can also see the article below for the resolution of the issues related to Windows update:

  http://Windows.Microsoft.com/en-us/Windows-8/how-solve-connection-problems-Windows-Update

  Hope this helps, get back to us if you need further assistance for Windows.

• Help! Try to update the values of Member - but does not (completely).

  We are trying to resolve a calculation in the middle of the update of business cycle. There is a push to update existing values for an account specific forecast time scenario.

  Essentially, we want to update the value of forecast current account 56400 to 0.33 * ("56100" + "56110" + "56300" + "56310" + "56320").

  The solution is to make sure only rest of the current year, Apr - Dec, updated forecasts to date.

  Currently the rule runs, but handful of values is never get updates - I'm not doing correctly?

  relatively small cube BSO, Account (dense).

  Here is the rule of this task running

  SET CACHE HIGH;

  FIX (& those 'Forecasts', 'the current iteration","F_00000");

  "56400")

  IF (@ISMBR (& NextMonth: "Dec"));

  0.33 * ("56100" + "56110" + "56300" + "56310" + "56320");

  ENDIF ;)

  ENDFIX;

  -followed by a calc all

  I expect to update all occurrences 56400 in the fix above...

  Thanks in advance!

  Himanshu-

  You probably need...

  UPDATECALC OFF SET;

  .. Smart calc or .in there will prevent 'own' blocks to be recalculated.

• The F65 firmware update does not start

  Hey everybody,

  We have tried to update the F65 the last built (2.20) the other day, but without success.

  We had it before on another version (before v2); but now the camera would not recognize the update on the sd card. No matter how we tried (to extract the contents of the folder 'media' at the root of the sd card).

  We tried formating the card in the f65, copy the files on a mac. without success; formatting the card in the f65, copy the files on a windows machine. without success.

  Is there a backup how-to guide somewhere?

  Thank you

  Sam

  Well, everyone - forge on the F65 SD cards.

  I put the hand on a 1 GB Pro DUO Mark2 Memeorystick which instantly worked...

• Firmware update does not stick

  I have 2 450 GB Seagate drives (model ST3450857SS) in a server PowerEdge 2950 running Windows 2008 R2 with a PERC5 raid card.  2 disks are configured in Raid 1 and are in optimal condition.  I run the update package Drive_Firmware_V38WK_WN32_ES68_A07. EXE to update the firmware on the disks of ES02 ES68.  I get the message "The update completed successfully" and restart the computer.  Unfortunately, the readers are always the ES02 version.  What I am doing wrong?

  I found an alternative solution.

  I was able to update the firmware using the Dell Nautilus.  At the time of this post, the latest version is at

  http://www.Dell.com/support/drivers/us/en/04/DriverDetails?driverId=CVM50&FILEID=3156368750

  I have downloaded the exe file, extract the content, burned the ISO image to a CD and then used the CD to start the utility on my server.

• Windows 7 update does not complete!

  Until about two days ago, all updates of Windows 7 is complete.  Now, whenever I stop, I get the small shield with the exclamation point, which means that there is some new updates.  He is stuck in a loop!  I have the same problem with a laptop with Vista but it is a spare, and I just don't care about it that much, but it's always a problem.

  However, my year old charge laptop Lenovo with a legal copy of Windows 7 is having this problem.  I want if possible a response directly from Microsoft. I don't have to do web searches and read the forums and it must go into the registry and all these things that I know nothing.  I don't download strange software.  I just run Microsoft software - like office and I have Adobe PDF, and that's it - no exotic things.  I want to add that my anti-virus is Microsoft Essentials!
  Really, please get some help!  I pay so much money for my equipment a legal licenses of Windows and this is the thanks that I get for it!
  Yet once again, a little guy like me shouldn't be looking everywhere for this answer.  Microsoft should take responsibility and help us solve this problem, perhaps even offering live assistance, especially for those of us who do not know where to look, what files to enter, etc..  I see that others seem to have similar problems, and it is not fair that Microsoft expects us to rely on user forums to find solutions or workarounds for the updates that are preparing! Help!

  Hi MarkSchwartz,

  ·         How long have you been faced with this problem?

  ·         You did it last changes before the show?

  ·         You receive an error message?

  You can check the updates failed and the error message in the history of the update

  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  Method 1: I suggest to run the troubleshooter and check if that helps.

  Open the Windows Update troubleshooting tool

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  For more information, you can also consult:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  Method 2: If the method above is not enough, you can place your computer in a clean boot state and then try to install these updates failed.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  I hope this helps.

• RAW files will not open of d610 in cs6 once installation on new laptop need the .dng 8.3 update does not work either

  I installed cs6 on a new computer, but I can not open my raw even files with the dng converter have the 8.3 update raw file?  You pay over $ 600 for a program, it looks that the software company would keep all updates online.  Is that I can copy the folders on my another computer in the folder of adobe on the new cs6?

  You don't need the DNG Converter. CS6 is compatible with Camera Raw up to version 9.1.1 (the latest version with CS6 is compatible).

  Update Camera Raw to 9.1.1 via help > updates in Photoshop or download the 9.1.1 zip file of

  Camera Raw installation of Adobe Photoshop CC and CS6 program

  Once you have completed the installation 9.1.1, you will be able to open files Raw D610 in CS6.

• The windows are empty; Update does not work

  Firefox has attempted to update 06/03/2015, but he didn't finish. Each window, except for the Mozilla Web site is empty. I have a laptop running Windows 8.

  • 1 Download Firefox full installation for all languages and systems {web link}
  • 2 Uninstall Firefox on your computer {web link}
    DO NOT REMOVE your profiles.
  • 3 after that, restart the computer. Then, run the full installer.