The purpose of doing a virus scan after Windows starts in safe mode?

I've heard some suggestions that, in certain circumstances, it is best to do a virus scan after Windows starts in safe mode. So I have two questions:

(1) would what type of circumstances you perform a scan antivirus in safe mode?

(2) what are the advantages or disadvantages?

I have found no reliable info that answers to these questions and would be grateful for any info, or even just a point in the right direction.

Thank you!

Hello

The advantage is that some process and services are not loaded in Mode without failure there is less chance
This malware can load and interfere with the process. The downside is the same if its best
to run the malware checks mode safe and then in Windows. Or run in Windows and as appropriate
difficult to remove malware is detected then run in Mode safe, then in Windows.

If you need search malware here's my recommendations - they will allow you to
scrutiny and the withdrawal without ending up with a load of spyware programs running
resident who can cause as many questions as the malware and may be more difficult to detect as the
cause.

No one program cannot be used to detect and remove any malware. Added that often easy
to detect malicious software often comes with a much harder to detect and remove the payload. Then
its best to be thorough than paying the high price later now too. Check with them to one
extreme overkill point and then run the cleaning only when you are sure that the system is clean.

It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.

TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
It will display all the infections in the report after you run - if it will not run changed the name of
TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
check with the other methods below.
http://support.Kaspersky.com/viruses/solutions?QID=208280684

Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)

Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

Malwarebytes - free
http://www.Malwarebytes.org/

Run the malware removal tool from Microsoft

Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.

Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)

Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

Microsoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

also install Prevx to be sure that it is all gone.

Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
here or use Google to see how to remove.
http://www.prevx.com/   <-->
http://info.prevx.com/downloadcsi.asp  <-->

Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

Try the demo version of Hitman Pro:

Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro

--------------------------------------------------------

If necessary here are some free online scanners to help the

http://www.eset.com/onlinescan/

New Vista and Windows 7 version
http://OneCare.live.com/site/en-us/Center/whatsnew.htm

Original version
http://OneCare.live.com/site/en-us/default.htm

http://www.Kaspersky.com/virusscanner

Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

--------------------------------------------------------

After the removal of malicious programs:

Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
system files.

Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html

-----------------------------------------------------------------------

If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

======================================

If necessary AFTER THAT you are sure that the machine is clean of any malware.

How to do a repair installation to repair Windows 7
http://www.SevenForums.com/tutorials/3413-repair-install.html

I hope this helps.

Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

Tags: Windows

Similar Questions

  • I have windows xp after the installation of service pack 3 I can only start in safe mode

    I have windows XP after the installation of service pack 3 I can only start in safe mode?

    Hello

    ·         You get the error message?

    ·         What happens when you try to start in normal mode?

    Method 1

    Windows XP can in every start Safe Mode by default. Even if you select the option Start Windows normally, it always starts in Mode without failure. IOW, you can't get out of safe mode.

    This happens if the switch/SafeBoot is added to the Boot.ini file. / SafeBoot parameter forces a boot in safe mode by using the specified parameters. The available parameters are:

    (a) minimal

    (b) network

    (c) safeboot: minimal (alternateshell)

    For more information about the boot.ini switches, see visualization and correction of the settings of the boot on x 86 systems

    RESOLUTION

    (a) click Start, run and type MSCONFIG

    (b) click the Boot.ini tab

    (c) If you have a dual-boot system, select the entry that is appropriate under the [operating systems]

    (d) in section downstairs, Startup Options uncheck / hisFEBOOT

    (e) click OK

    (f) restart Windows

    The entry/SafeBoot are removed from the Boot.ini file.

    Method 2:

    If the above method is not the cause, it seems that Service Pack 3 is not installed correctly.

    Step 1: You try to run the system restore from safe mode that will repair return the computer to the point while it was working fine.

    How to restore Windows XP to a previous state

    Step 2:

    I suggest you follow the troubleshooting steps form the article and check if it helps.

     

    How to troubleshoot an installation fails on Windows XP Service Pack 3

    http://support.Microsoft.com/kb/950718

    Note: System requirements to install Windows XP SP3

    Reference: Learn how to install Windows XP Service Pack 3 (SP3)

    Hope the helps of information.

  • Whenever I open Firefox, I find that there is no search engine in the search bar, and I have to reset or start in safe mode to make them reappear. Why?

    There is no EnginSearch search bar in the top right of the page and none appears when I try to restore the default values or manage search engines. To return to the search bar, I usually have to reset Firefox or start in safe mode, but this doesnm looking for a solution to this problem.

    It is a conversion tool - Vixy Freecorder. Not sure if that was the cause, but I uninstalled and not had any problems since.

  • I have win XP SP3, I ran a virus scan and I still can't open anything in the title of the standard account now the admin account does not work no more not even in safe mode what can I do?

    How can I fix the operating system of the issue I'm having with my computer I did a virus scan and now I can't even do anything under the admin account I could do before the scan I can't even do anything in safe mode the standard user account was seen maleware pop ups before I did the scan the admin account had no problem before the scan is carried out I used Mcafee and it did not work it seems to have done worse and windows defender was no use which can make?

    Hello

    • You receive an error message?
    • What exactly are you not able to access?
    "Your question contains all the required information necessary for us to help you. Please re - write your question, this time to ensure that you have included all the information required and we will try to help. »
    Refer to this link for more information on: How to ask a question
     
    In the meantime, you can try a full system scan just to be sure.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  • Since my computer downloaded the auto update: hotfix for windows XP (KB2570791), it does not start in place... the screen goes all black. I can only start in safe mode.

    I restored the computer to a previous point, but as soon as I stop and restart, the same thing happens. ??

    Hello

    You can try the steps listed in the link: after the Windows Logo appears, or after you log on Windows, a Windows XP computer can display the wallpaper, a black screen or a blue screen: http://support.microsoft.com/kb/318027

  • Cannot plan the virus scan in Windows Defender (Win8) in the settings tab / advanced. Please notify

    Hello!

    Please tell us how I can program a weekly virus scan in Windows Defender on my laptop of Win8. I can do in MSE on my Win7 laptop!

    Plan it in Task Scheduler. Hope this helps and if you need any additional aid station and we will be happy to help you

    The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of the forum.

    "When we try to take anything by itself, we find it hitched to everything else in the universe."-John Muir

  • In the course of a defender of virus scan or windows computer scan hangs at a certain file.

    During a virus scan or windows defender analysis the computer freezes at a particular file: C:\windows\system32\driverstore\filerepository\lxbzw2k.inf_4430bd8c\hebrew\lexlmpm.dll

    I tried:

    McAfee Virus scan several times

    Windows Defender

    Disk Defrag

    Disk Cleanup

    Cleared browser history

    Cleared Temp files and Cookies

    Thanks for your help.

    Please start the command prompt (cmd.exe) with admin rights [1] and run sfc [2]:

    sfc.exe/scannow

    He is able to find and repair broken files?

    Also try to run chkdsk /f /r to fix HARD drive problems.

    Best regards
    André

    [1] http://windows.microsoft.com/en-US/windows7/How-do-I-run-an-application-once-with-a-full-administrator-access-token
    [2] http://support.microsoft.com/kb/929833

    "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

  • Removal of slow mail returned after a reboot in safe mode. Scan virus disabled Norton/out e-mail without help. (win10)

    Removal of slow mail returned after a reboot in safe mode. Norton Anti-Virus analyzes e-mails to off, no help. After restarting in safe mode, it worked for about 2 days.

    Let windows search not verified. However, I noticed many filters put in place by me to eliminate the unacceptable emails. Given that I erased these filters, it seems to work better. Sometimes slow, but for the most part better.

  • Downloaded and paid of Minecraft and having problems with Java, Anti Virus Scan and Windows Update - error code 800F081F

    Downloaded and paid of Minecraft and having problems with Java, Anti Virus Scan and Windows Update - error code 800F081F

    Would you advice, thank you.

    Hi Hugo,.

    1. what anti-virus software you have installed in the computer?

    2. What is the full error message/code?

    3. the issue occurred after you install Minecraft?

    4. are you able to play Minecraft without any problem?

    5. what happens with Antivirus and Java?

    Windows Update can occur if one or more of the following conditions are met:

    1. the Windows Update database is damaged.

    2. antivirus software is configured to scan the %Windir%\SoftwareDistribution folder.

    3. the service (BITS) Background Intelligent Transfer Service does not receive a content link header.

    4. a required system file is incorrectly registered.

    5. Windows Installer has encountered an error.

    6. the manifesto of component maintenance (EC) is damaged.

    7. the Windows Update service has stopped during the installation.

    8. a version of the file conflict exists with Windows Update agent files.

    Please follow the steps described in the methods to solve the problem:

    Method 1: We will try the steps from the following link and check the result:

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058?WA=wsignin1.0

    Method 2:

    To correct the errors that occur when you use Windows Update, install, and run the system update readiness tool. The tool analyzes inconsistencies on your computer and fixes as its current installation.

    You can view the following link to download the system update readiness tool and check:

    System tool update that corrects problems of Windows Update is available for Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

    http://support.Microsoft.com/kb/947821

    Details of the event log to find what caused the Antivirus and Java to fail:

    What are the information contained in the logs of the event (Event Viewer)?

    http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

    Hope that the information provided is useful.

    For any help related to this problem or any question of Windows, you can still display in the Microsoft Community Forum!

  • Firefox does not, as soon as I open the window solutions, may NOT START in safe MODE?

    Recently, I accidentally begain download some unwanted addons - but I cancelled the download before being finished and quickly removed the programs by uninstalling program files issues. Firefox worked pretty well at the time, but later he started to become less sensitive. I did some cleaning (clear the cache, etc.) and done a virus scan. Has not made a difference.
    Eventually he started to get like some that I open a firefox browser - becomes inadmissible. The first two times, disconnection and reconnection to my connection int fixed. But now is not working and even after uninstalling and reinstalling firefox, it is inadmissible. I should have the version 6.0.2
    Finally, there is no way I can run firefox in SafeMode because as soon as I open the browser it is inadmissible, which means that I can not even access toolbars.

    -> Close Firefox

    • Click the Firefox button, and then click exit
    • NOW press CTRL + SHIFT + ESC keys to open the--> Task Manager process tab-> click right firefox.exe and click end process tree -> close the Task Manager

    -> Start Firefox in Mode safe by holding down the SHIFT key when you start Firefox

    • As alternative method, use the Win + R key combination and enter one of the following values in the box run Windows:

      • Firefox-safe-mode
      • "C:\Program Files\Mozilla Firefox\firefox.exe"-safe-mode
      • "C:\Program Files (x 86) \Mozilla"-safe-mode

    -> Safe mode of Firefox window will appear-> don't SELECT ANY OPTIONS, just click continue in Safe Mode

    Check and tell if its work while you use Firefox Mode without failure.

    -> Themes and extensions troubleshooting

  • My 8 victory... infected with the virus cannot start in safe mode...

    recently, my computer of windows 8 has a virus... (miss click an ad pop up and it's on the computer)

    I already got Malewarebytes Anti Maleware and installed AVG, but this virus that bypassed and infected my computer. I tried the standard F8 during startup to go into safe mode and run my anti virus scanners, but apparently it does not work in windows 8. Some say SHIFT F8, that does not work either. Also any other method of setting up safe menu starting boot or mode does not work as it should connect on the desktop to go threw the settings and activate it for the next boot upward. This does not work for me since the virus I have apprently made my fall display driver, after I get my user password to start the desktop computer, so I don't see anything but the pointer of the mouse, everything is black. Y at - it another way to start in safe mode or trigger a recovery system or restore without actually being on the desktop?

    Why windows might change?

    I already ordered a recovery disk as that seemed to be my only option. But the works of windows 8 way I will NEVER buy a computer with it again. Cannot start in safe mode and can't do the simplest task without being a great test. It's crazy. I thought that windows 8 was supposed to be simple and easy to use!

    Please reset your PC. The procedure is given in the link below:

    http://support.HP.com/us-en/document/c03546603

    If this does not help, recovery of the system to the factory settings. Consult the following document:

    http://support.HP.com/us-en/document/c03489643

  • After having upgraded to Firefox 24 it now won't start at all after clicking on the icon. My OS is Windows Vista premium. It will start in safe mode.

    Upgrade to Firefox 24 and now nothing works at all despite uninstall it and reinstall several times and lose all my favorites etc. However, it does not start in safe mode. At first, I thought it was my Norton 360 Security, but after 2 hours in contact with them, I'm still in the same position. When I double click on the Firefox icon I see the moment where the cursor and then it disappears and nothing loads.

    My OS is Windows Vista Premium and I use Windows internet explore for the time.

    HELP Please!

    Thank you nellus91.

    I used the Microsoft Safety Scanner first, and it found nothing. I then used TDSSkiller and he found the problem.

    Problem solved.

    Thank you.

  • Vista 64-bit Black Screen of Death, with just a mobile available slider, the system does not start in safe mode.

    My system worked properly on 25 April and then something happened and now the machine comes back with "Start menu options" but will not start in one of the listed options, modes result in the same outcome.  System also starts on the Vista CD.

    System begins to boot normally, shows the tracer Green Windows at the bottom of the screen, then the mouse pointer appears and moves but the rest of the screen remains black.

    That's it, that's all what he will do.  I checked the settings of the computer and ran the diagnostic tests available and everything seems to go fine and passes all the tests.

    I worked on my own computers for over 20 years and never been stumped before, but I must say this is a first, and I have no idea what to try to do it now.

    Help or direction is appreciated.

    original title: Vista 64-bit Black Screen of Death, with just a mobile available slider, the system does not start in safe mode.

    See if there is a way to tecover clean your data before doing a restore to conditions of factory that will wipe the drive of all.  You can use Knoppix http://www.knopper.net/knoppix/index-en.html with a good ISO as Copier: http://isorecorder.alexfeinman.com/isorecorder.htm as well as a blank CD (which you will need to do on another computer).  Starting on this disc and lla should give you enough access to the system (if you do not have any other means) to backup your important data.

    So since you seem to have no other alernatives, you can try retoring the original factory computer options. However, if it is a hardware problem as could very well be the case, you can still encounter problems after even this drastic step.  Then you will need to consider in a reputable computer repair shop (NOT Geek Squad or or a any of these big store centers) or maybe even go back to the manufacturer for repair.   Check out several options and compare the costs, quality and guaranteed and then make your best decision.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Windows XP Professional starts in safe mode after the service pack 2 update

    I have an older version of Windows XP version 1.0 on a computer in November 2001 of the gateway that I have updated all offers updates of material such as BIOS and motherboard.  Then to the service pack 2 update so I can load an antivirus software which does not load unless you have SP2 or later version.  It loads like a champ and restarts, but Windows does not start normally, I have to start in safe mode and remove SP2.  Is there a driver error that I need to find?  Or is there an other update I need before SP2 for such an old version of windows? (He also did the same thing with SP3).  Help!  I tried to reload Windows with the repair feature, but was lost when he gave me a prompt C:\.

    Hello Doug12345,

    Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Windows XP and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

    http://social.technet.Microsoft.com/forums/en/categories/

    Thank you

    Input jack
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Phone constantly optimize the applications and does not start in safe mode.

    Hello, I restarted my phone yesterday morning and it has been "Optimizing apps" since then, I have no access to a pc that I work away from home, I reset hard it loads of times and tried to start in safe mode by using low volume and power (it does not restart the phone the sony screen over and over) is here something I can do to get the z3 works again? Any help is appreciated!

    @Mav0095

    You will need a computer to use the CCP or bridge

    PC Companion (CCP)

    Bridge (for Mac)

    Xperia Companion (XC)

    Software repair Guide

    Alternatives on how to backup Xperias

    http://talk.sonymobile.com/thread/36355

Maybe you are looking for