The queue from table question

Similar Questions

• print jobs in the queue from the computer to the top, but do not print

  1400 series all-in-one print jobs in the queue from the computer to the top, but do not print. Scan and copy functions are fine. What is the problem?

  chrismcgo wrote:

  I've upgraded to a new computer with windows 7 a month ago. The printer worked fine until last week. I tried the remedy proposed to other Hp users, but the computer will not accept the software provided with the printer, so the printer is always offline. Any other suggestions?

  I suggest the following: disconnect the cable USB, then download the full driver recommended from HP here.  Once the download is complete, run the Setup program.  Do not connect the USB cable until the installation program invites you to do.

• Load the data from table to table index

  Hello

  We need to load index per table to table data. The code below works fine.

  declare
  query varchar2(200);
  Type l_emp is TABLE OF emp%rowtype INDEX BY Binary_Integer;
  rec_1 l_emp;
  
  begin
  query :=' SELECT * FROM emp';
   EXECUTE IMMEDIATE query BULK COLLECT INTO rec_1 ;
  
  For ALL  i   in rec_1 .First .. rec_1 .Last
  Insert Into emp_b
          values rec_1 (i);
  end;
  /
  

  But data from the source table and the target table are dynamic.

  Ex:

  In code, above table emp (source) and target is emp_b are static.

  But for our scenario is dependent on the source table, target would change as below.

  If source is emp target is emp_b

  If source is emp1 target is emp_b1...

  create or replace procedure p(source in varchar2, target in varchar2)
  as
  query varchar2(200);
  source varchar2(200);
  Type l_emp is TABLE OF emp%rowtype INDEX BY Binary_Integer;
  rec_1 l_emp;
  
  begin
  query :=' SELECT * FROM ' || source;
   EXECUTE IMMEDIATE query BULK COLLECT INTO rec_1 ;
  
  For ALL i   in rec_1 .First .. rec_1 .Last
   execute immediate 'INSERT INTO ' || target || ' values ' ||rec_1(i);
  end;
  /
  
  
  

  His throw. How to implement this scenario... Please help with that?

  No particular reason to use to COLLECT EVERYTHING & BULK here? Why not ordinary

  INSERT INTO target
  SELECT * FROM source;
  

  However if that's what you need you need a dynamic PLSQL block, which comes with additional side effects (code SQL injection). Dynamic SQL is not here.

  Kind regards

• Implementation of the shift from table register

  Hi all

  I am a novice in Labview and I'm trying to implement entrelaceur Convolutional.

  I have a problem with the implementation of the shift register using tables.

  Here I use interleaver in channel 4. First bit should go directly to the output. 2nd bit should go in a shift register which is initialized to 0. 0 should go to the exit and entry should replace the registry of offset value.

  Similarly, in the 3rd round, 2 element shift register is present initialized to 0. Here, too, 0 should go to the exit element (0) first should get input should come in the shift register. And in the 4th inning, 3 element shift register will be there.

  I tried to apply this using tables, but I'm not be able to crack. Using loops with disabled automatic indexing is the key to this?

  Your help to solve this will be highly appreciated.

  Thank you

  Try something like this:

  

• Unable to print on a HP printer, documents stuck in the queue

  OK, so I have a HP Deskjet 1000 printer. And I am trying to print a Word from my other computer document, but it does not work. I checked the "see what's printing' for this printer on the computer on which I wanted to print from, and it shows a bunch of documents in the print queue. I tried to cancel or restart them, but nothing happens. I just get "error processing command." I already checked the C:\Windows\System32\Spool\PRINTERS, but there nothing in it. I already deleted the printer and re-inserted and you download the drivers again. Unable to print all right, but I still have computers (I have two). On the computer where the printer is, if I try to print something, nothing happens, no documents in its queue. But the other computer, it just keeps adding more documents in the queue and I can't do anything. I use Windows 7 Home Premium on two of them.

  Edit 1: I was able to successfully complete the queue from here: http://www.online-tech-tips.com/computer-tips/how-

  But now the problem is when I go to MS Word and go to file > print, it says ' Paper Out: 1 document waiting '. I wonder if this is what is causing the problem. I use a HP Deskjet 1000. And then if I try to print something from the computer with the printer, the print job will appear and then disappear quickly.

  Edit 2: Ok, I've solved this by removing the printer from devices and printers. When I added this return, he installed a driver that wasn't there and ended. Then I tried to print something and he actually got the print job. Now the question is when I push the power button and ensuring that it catches the paper, it is not actually print out what I wanted to print. Also, I am trying to install the drivers for the printer, and it says "plug the square end of the USB cable to the back of the printer and the flat end of the cable to a USB port available on this computer. Well, I connected physically, but it's not detect it. The drivers are for Deskjet 1000 J110.

  Hi rumpled103

  Step 1 - Microsoft Support

  1. The following link will help you.
  2. Link 1: Microsoft - Support "diagnose and automatically fix problems printing and printer"
  3. Link 2: Microsoft - Support "solve printer problems"
  4. Download & install fixit and follow the instructions.

  Step 2 - OEM Support

  1. Link to the HP Support page will help you.
  2. Link 1: HP Support - 'Print a Test Page - HP Deskjet 3000 printer learn how to print a test page from the printer HP Deskjet 3000 J310A-, 2000 (J210A), or 1000 (J110A)'
  3. Link 2: HP Support - "automatically resolve problems printing and scanning with the HP print and scan the doctor"
  4. Source: HP Support - "HP Deskjet 1000 printer"

  Note: Please let us know

  1. Please let us know if the problem is solved or not. Please do not hesitate to communicate in response if you need assistance

• Part of the queue

  Hi all

  I am using the queue from the Message of my project implementation.

  Inside of a structure of the event, message from the queue in the queue. The message is selected according to a ring selection menu. a variation there too, so a cluster object is used for the variant of cluster and string and given to the queue.

  When I run the vi, default menu ring, its not working properly. but when I change the menu ring I get an error message. Please see the attachment.

  Everyone please comment on this issue.

  Kind regards

  MFP.

  You get an error on the "enqueu" item 1, because you use a reference to invalid queue. This occurs because you use 'use default if unwired' on the output of the structure of the event. In one (or more) of your structures of event you do not feed a valid reference of queue in this tunnel. LabVIEW out then a default queue (NULL). Since you use a registry to shift to a next iteration, you'll use this invalid reference.

  There are two solutions:

  1. Right-click on the tunnel, then uncheck the box 'use default if unwired' and all references of the tail through the diet
  2. Do not use a shift register, I think it unlikely that you change to a different queue during the runnning this VI.

  Tone

• How to remove the message from the subject of the SIDES in SOA Suite 11.1.1.7

  Hello guys,.

  For waiting message of the subject of SIDES, I configured the foreign server in weblogic server.

  Here are the steps I followed to set up foreign server:

  Configuring WebLogic Data Source-RIBAQJMS_DS - JNDI name: jdbc/RIBAQJMS_DS

  For the connection SOA_Cluster-Pool-> Driver class Name:oracle.jdbc.xa.client.OracleXADataSource

  WLS_JDBC_REMOTE_ENABLED value = "-Dweblogic.jdbc.remoteEnabled = true in the setDomainEnv.sh bounced the server."

  JMS Module: (Services-> messages-> JMS Modules) - Oracle: Configure a JMS - name system Module: AIAJMS_MODULE

  2. objectives: SOA_Cluster

  A foreign server: (Services-> messages-> JMS Modules-> AIAJMS_MODULE

  Oracle: Configure a foreign JMS server

  -> General configuration - JNDI Initial context factory: oracle.jms.AQjmsInitialContextFactory - JNDI properties: datasource = jdbc/RIBAQJMS_DS Configuration-> Destinations-name: RIBAQ - Local JNDI name: jms/RIBAQ

  Remote JNDI name: topics/ETLOCATIONSFROMRIB

  Configuration-> connection factories - name: ForeignTopicCF - Local JNDI Name: aqjms/XATopicConnectionFactory - remote JNDI name: XATopicConnectionFactory

  JMS adapter (deployments-> adapter JMS-> Configuration-> outbound connections Pools) - pool name: eis/AQJMS/RIBTopic

  Properties-> location of standard connection: aqjms/XATopicConnectionFactory

  Topic: true
  

  In JDeveloper used JMS JMS adapter provider chosen Oracle Advanced Queuing,

  Select the queue from the drop-down list: jms/RIBAQ and the connection in common such as: eis/AQJMS/RIBTopic

  After you deploy the composite in the SOA server log there is no error message, to study further I put the oraacle.soa.adapter logging level to finest (32).

  However I can not see the relevant error messages in the log files.

  Can someone please provide any idea, is it need any additional installation in fact?

  Thank you

  B

  I solved the problem by myself, the making of connections which I was referring was equated. This is why the messages were not sent.

  I would be able to base problems by creating a similar scenario of test cases.

  See you soon,.

  B

• Will be the leak memory for the queue when it is used in producer and mode of consumption data acquisition transfer different size table.

  In data acquisition, I use a loop to query the data from the hardware, another loop to receive the data from query sent by queue loop.

  Each time the size of the transferred data matrix is perhaps not the same, so the system can assign different table size and recycle frequently.

  It cost memory leak. Or it will slow down the performance, given that the size of the array is not fixed, so everytime need to create a new array of size.

  Any suggestion or the best method.

  If I understand your description, your DAQ loop acquires data with the parameter of the function of reading-'1 ' for reading at the DAQmx samples. This translates into different picture sizes.

  Passage of these tables directly to a queue is valid and she didn't mind important in performance (at least AFAIK) and it certainly does not leak memory.

  So the question is more or less:

  It is valid that the consumer receives sizes different picture for analysis? How your consumer manages these tables?

  hope this helps,

  Norbert

• Structure of the event does not clear the queue after his release from the Subvi

  OK I'm not sure if this is a stupid question or not...

  I was trying just a few tips and stumbeled on this problem...

  So I created a sample (not exactly)

  In qqq_Main.vi just press PressMe

  (it opens a Subvi qqq.vi)

  There are two buttons to stop "Alt1" and "pylone2".

  To close the Sub - VI press either on "pylone2".

  or press "Alt1", then "pylone2".

  with the latter method of the value of closing change pylone2 is registered outside the while loop and after the closure of the Subvi should not it be erased? (Or should manually clear us it?)

  For this reason not clear, the second time I press 'PressMe' change the value of pylone2 even goes off before you press anything

  I can't look at your code at the moment, but according to your description, it seems that the system works as expected. I guess you do a completely static record of events (open the event configuration dialog box and select the controls and event).

  The first thing to clarify is your use of the term "registered". In this case, it's a problem, because the registration in the context of the protests means asking to receive the event when it happens.

  Now that you know it's important to understand where the recording is happening, because that's what determines which events are stored in the queue. When you use this type of static record, registration happens from the VI the event structure is in run mode (Note: this does not mean that the VI is actually running, but just that it's the of running or reserved for the race) and the cancellation of registration only happens when the VI mode of execution. Who is right for which you get the events in the queue of the previous run of the VI - the VI is still in run mode, then the event is added to the queue and still waiting in the queue until the structure of the event to run again.

  You can work around something like that by switching to dynamic registration of events, where you can unsubscribe to empty the queue at the end of the VI, but requires more code. Also, in 2013 LV there are a few features added to events that could allow to do this statically (I don't study all the additions, so I don't know if this is possible for static recording).

  There is a good presentation on the events of NIWeek 2013 by Jack Dunaway. You can find details of how to download the video here - http://lavag.org/topic/16091-ni-week-2012-videos/

• Printing for Vista Home Premium 32-bit network: Blank document or disappears from the queue

  I'm having trouble printing large format HP DeskJet 1000 c, which is connected via a parallel cable to my Media Center/DVR PC running Windows Vista Home Premium 32 - bit SP2 on my printer. I connected with the success of this printer to two different computers, a desktop PC running Windows Vista Home Premium 64 - bit SP2 and a laptop Mac OS x 10.5.8. I can print from the local computer very well, but when I try and use the printer on the network, one of two things happens depending on what machine I try and print from:

  1. from Vista 64 Desktop: printing the task appears, treats and disappears from the queue to the local printing on PC DVR. Printer advance a sheet of paper as if he were about to print, then waits with a power indicator light flashes. If you send a new job network, the tip sheet of paper is ejected and the process begins again. If you send a new job locally, the tip sheet of paper is ejected and the local job will print normally.

  2. from Mac OS x: printing the task appears, treats and disappears from the queue to the local printing on PC DVR. Printer does nothing.

  Although the process of networking of printers with OS X 10.5 and Vista is a bit more complicated (annoying) it was with XP, I am able to print from the Mac to a printer on the Vista 64 machine very well. Similarly, PC DVR allows you to print to the printer of the Vista 64 computer and a printer connected to my Mac desktop.

  I checked the HP site for drivers and since it is a quite old printer, there is no listed for any operating system newer than Windows 2000 (which a pilot has been included with the operating system). Any ideas as to why the PC DVR will not take of the network print jobs? Unfortunately, this complex printer (3 printers, 4 machines) installation is somewhat needed due to the possibilities of each printer and how my home office is laid out. If they did a multifunction, printer laser color large network format, I could sell my soul for what it... But I'm not aware of such a machine available to mortals.

  There is a difficulty that recently came on the HP Forums for 64-bit Vista:

  http://h30434.www3.HP.com/T5/printer-all-in-one-software-and/DeskJet-710-720-810-820-100-series-printers-patch-for-64-bit/m-p/203377#U203377

  All you have to is to download the mentioned file and replace some dll with those provided.

  The question remains with OS X, but I do not expect that Microsoft will provide no support for this.

• don't print from firefox, file is automatically removed from the queue

  I try to print from the web browser firefox or a pdf document and files will not be not print and are removed from the queue after about 30 seconds. I tried the browser google chrome and they print well from there. This problem just started today.

  Make sure that you do not print in a file selected and the correct printer is selected. You can see these settings in the "native print dialog" window when you do {Ctrl + P}.

• Problem: Build a VI to display a string in the table of the lights. Each letter must be posted in a separate table and letters must move from one table to the other in the direction from left to right.

  Hi all

  Problem: Build a VI to display a string in the table of the lights. Each letter must be posted in a separate table and letters must move from one table to the other in the direction from left to right.

  I did program mentioned above but it does not work. Can you tell me what is the problem?

  There is no error is indicated in the program. If someone knows about it please try to find solutions and help me out of this problem.

  I have attached my program with this message.

  Thank you in advance!

  (1) FOR loops are your friend here.  You can make a slight restructuring using loops, and then you will have less mess to deal with, the inner loop through tunnels of autoindexing to make it even simpler.

  (2) I would only treat the numeric values of the characters.  So go terminal of control of the chain, the capital letters and byte array to before the outer loop.  You can use a size of Board over there to tell how many times the outer loop to iterate.

  (3) the Index table is extensible.  So you only need over the index of the first, and it will increment itself, as it develops.

  (4) you need to finish the lookup table (table 3D)

• Link to information from tables and display the 'best '.

  Hello! I'm totally new to this great software, and the truth is that I lost D:
   
  I try to explain in more detail what I have to do, I hope you can help me please it is urgent T_T

  I do 3 tables must be related to each other, that is to say a table where a username will be manually enter, another where you manually enter the user name and the third which will automatically enter power of each user (for automatic writing, I'll use random data). Each table will have a box number, for example:
   
  Table 1, box 1: Paul
  Table 2, box 1: door
  Table 3, box 1: 3.74
   
  Table 1, box 2: Miguel
  Table 2, box 2: Ramos
  Table 3, zone 2: 4.99
   
  Table 1, box 3: Maelle
  Table 2, area 3: Branco
  Table 3, case 3: 4.98
   
  I mean, I bind the box to one table with the other three. And because the program must compare the data in table 3 (power) and display the data of the user of best (which has the highest power). In this example, the program should appear:
   
  BEST USER:
  NAME: MIGUEL RAMOS
  POWER: 4.99

  (Is not slender record information when I close the program)

  I don't know if I ask you very much, I have a very clear idea in my head of what I have to do, but being a new software for my not know how to implement it.

  Thank you in advance for your quick response and help and ilustrative! xD

  Have you tried something with the basic understanding of your question check if this is what you need?

  -Still not clear what you mean by table? (In my opinion, the table is 2d array of values here, otherwise please let me know.)

  -C' is the reason why I asked you to show your code you did then it will be clearer.

• Photosmart C5180 - impossible to remove from the queue of the printer

  Hello

  I am trying to print something, but I can't delete the first document in the queue (what's more, I want to print). It is frozen on the "remove" status, but nothing happens. I tried restarting both the printer and laptop, but still nothing. Help!

  In addition, the State of the printer on my laptop says ' paper' (but not on my printer) and yet it is not paper. Any help very welcome!

  Hello

  This can help with the paper stuck in the print queue.

  In Control Panel, open administrative tools and select abuse.  Scroll down to the print spooler service, right click and select Properties, then click the Stop button.  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.

  Restart the computer and you should find that the document has been removed from the queue.

  Kind regards

  DP - K

• How to copy the data from the indicator table 1 d to the Clipboard

  Is it possible to copy data from table 1 d indicator to the Clipboard as a text and for more than one cell?

  I use LV8.6.

  Leszek

  Sorry, I wasn't sure if it was available in 8.6, apparently not.

  You could create an indicator of fine print and use 'picture to a worksheet string' to complete. Now, you can just cut & paste the text instead.