The R7000 there Quantenna 5 GHz battery drain issue or has it been fixed?

Hi, I'm looking to upgrade my WiFi router and I considered the R7000, but do want to not buy a router that drains the battery of my phone when it is connected to the 5 GHz channel and can't see any point in the upgrade if I end up having to stick to the 2.4 GHz I already have.

I have known the issue recently, when connected to new TalkTalks router (from Huawai) and got tired of waking up to a phone dead every morning.

I did a little research on Google and found that pilots Quantenna lacked support for negotaition powersaving to 5 GHz if this problem has been fixed. So far, I only found a reference to the R7500 having this problem. If anyone knows if the firmware has been updated to fix the powersaving?

Thank you

The R7000 relies entirely on the Broadcom and don't use all Quantenna chips.

Tags: Netgear

Similar Questions

  • Is there a reason that my history of editing has apparently been deleted?

    I went to windows update to search for updates there were two more "important." I chose "install". By day, I clicked on troubleshooting in windows update (because, I guess in my mind that he did not go enough fast? I don't know.) Anyway, it was suggested that it would be more prosperous troubleshooting with administrator permissions. So, I did. I troubleshoot-done as an administrator. Then all updates which have already passed or failed that were already installed on this computer has disappeared from the history of the update. All of a sudden my computer has never been updated, there was ever a check of updates. Following the advice of my local computer repair shop, I did a system restore to yesterday. Restarting the computer itself and everything seemed to proceed as planned. But when I finally reached the home screen (I don't know what else to call it, the screen where the icons of applications are, including the place of the office) and entered the office and nothing. I then turned off again and everything seems back to normal. Two updates installed successfully. But they are the only updates that exist in history. The system restore has nothing... apparently. I just want to know if I messed up. Is it normal that there no update in the history of the update, other than those installed today, as they now seem to install automatically? Is there a reason that my history of editing has apparently been deleted? I'm really sorry if it's super confusing. I'm not good at summarizing. Thanks for any help.

    Original title: I don't know what I did

    Hello

    If Windows Update Troubleshooter reset components Windows Update or run the preparation tool update of the system during the process it would be empty folder of Distribution of software which causes the update history disappear.  There is nothing wrong with the system, and as long as the updates are installed I wouldn't worry on this subject.

  • Since iOS recent upgrade to my 5s my battery drains too quickly.  How to fix this problem?

    I recently downloaded version 10.0.2 Apple software update on my 5 and the battery drains too quickly.  It never happened until this update.  How to fix this problem?

    Hello kellyfromrexford,

    I understand that you are having a singing of fast draining of the battery you upgraded to iOS 10 on your iPhone 5s.  To determine what application or process affect the life of your battery, take a look at the information in these resources:

    On the use of the battery on your iPhone, iPad and iPod touch

    Maximize the life of the battery and battery life

    Take care.

  • iOS 9.3.2 battery drain issue on iPhone 6

    iPhone 6 upgrade to iOS 9.3.2 recently but having problems with the battery draining quickly, tried the reset and restore but didn't worked, everything advises difficulty?

    erictay2000 wrote:

    iPhone 6 upgrade to iOS 9.3.2 recently but having problems with the battery draining quickly, tried the reset and restore but didn't worked, everything advises difficulty?

    Restore from a backup or news?  Try restoring as a new phone and see if the battery still drains quickly.

    http://www.Apple.com/batteries/maximizing-performance/

  • When Apple will fix 9.3 battery drain issue?

    It's crazy and I want to know when to expect Apple to solve the problem of life 9.3 battery? Once set, how will I be able to "apply" the changes to my phone, since I have already installed? Am I too late? What I should expect 9.3.2? Or what is planned? I just want to know how much time I have to deal with that and how do I get the changes 'fixed' to 9.3 on my phone since I have already installed. Thank you. Please, I beg you! I really need help.

    There is no problem of battery life in iOS 9.3. While you might have a problem with your individual device, it is not a systemic problem with iOS. Since you don't specify what your problem is, what would you say to detail what you are experiencing and what troubleshooting you have tried to solve your problem. When did start? Have you checked in the settings > farm to see which application uses the highest percentage of your battery?

  • the settings does not appear on my iphone 5, it has already been

    Settings does not appear on my phone, it has already been

    Hello

    The application of parameters cannot be deleted or hidden.

    You may have moved to an another home screen or in a folder.

    To search for the settings app, when you view the home screen on your iPhone:

    -Drag down on the center of the screen > in the search at the top of the screen box, type 'settings' > will display the application icon (you can open it from there) with any folder name, shown to the right of the icon.

  • Volume control does not appear on the screen when I try to activate it. This has never been a problem until now. How can I get this working again?

    The volume control is located at the bottom right of my sidebar it me has not given any problems so far. Now, he just will not appear on the screen when I try to call. This has never been a problem before. I really did something to screw things up (again!) today. This is the first time I had this problem.

    Next time please indicate what opersting system you first use before describe you your problem.

    You can start by doing a system restore. Choose a date on which your Volume icon in the taskbar.
    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

    If for some reason it does not restore the Volume icon, then...

    For Vista, use this tutorial:

    http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

    You can try a method first. If the Volume box is grayed out (is usually), go to method 3.

    2. for the Volume icon

    To activate the Volume - icon Enable_Volume.reg< click="" to="">
    Then, follow the instructions from #5 to #9.
    Make sure that you restart the computer to complete the process.

    For Windows 7, use this tutorial:
    http://www.SevenForums.com/tutorials/19085-system-icons-enable-disable.html

    Go directly to the Option two

    9. to activate the Volume icon

    (A) click on the download button below to download the file below.

    Enable_Volume_Notification_Icon.reg

    then follow the instructions from #11 to #15.

    Make sure that you restart the computer to complete the process.

  • Battery drain issue

    I have the latest version of the software on my iPhone and watch. Lately my watch started acting really weird, battery in 11 hours completely, even if the watch is not used. If you check the use in the app Apple Watch, he told me that most of the time the watch have been used.

    After re-pairing/restore watch battery works very well (> 2 days standby), until what I put in place of the dials / install apps etc (battery sinks again less than 9-10 hours).

    AS long as I have re-pair/restoration shows they work very well, but I can't do that all the time. Is there a way to solve this problem, until the next version of watch OS comes out? I did not all apps fitness on them, and yes I tried to reboot devices 1 million times.

    Hello

    It can help to identify the cause, if you initially delete all third-party applications on your watch and then monitor the performance of battery after adding them back one by one.

    It is the same regarding complications of watch face.

  • 10 IOS on iPhone 6s - battery drain issue

    Hi all!

    I've updated the IOS official 10 OTA on my iPhone 6 s, here are the initial impressions, I felt very refreshing on IOS10, but one thing (the major) little to care about me, someone at found that battery faster? In the morning around 08:30 it was 89 percent after I did the update, currently it is 56% (89% to 56% directly), I hardly used for mobile on 40mins calls, Whatsapp 20mins and other activities of the internet misc 30 minutes or more, this was not the case with IOS9.3.5 and occasionally the screen on an aggregate used to 4 h 30 min or slightly above I was seriously expecting the better battery life.

    Thank you

    Sunil

    Hello, check these http://www.apple.com/batteries/maximizing-performance/ steps, they will help you maximize the life of your iPhone.

  • 9.3.3 update battery drain issue

    Hi, 2 days back I have updated to IOS 9.3.3 since the time my iphone 6s battery empties very fast and today I had left with 10% battery and mobile sank itself.

    When will this problem be resolved?

    I have seen no report unusual here on the battery problems with 9.3.3. This article can help.

    http://www.Apple.com/batteries/maximizing-performance/

  • Treo pro complete battery drain issue of recharge recovery

    Hello

    I forgot to charge my Treo Pro for some time and now its completely off fees. has started to charge with the AC adapter / CC, but his does not work. Tried the cable charge USB, his work, but for every 10 minutes his light when loading and closing saying 0% charge. How do to get out the phone and fully charge and then start?

    How to break this load 10 min-> wakeup-> shutdown 0% surcharge?

    I saw the similar problem and a patch in 800w phone but my phone turns any upgrade also... Is it possible to Activ phone alone charge mode?

    My req I need to charge my phone, usb charge her turning on for every 10 minutes with light load, how to avoid it and leave the full load device.

    Hello

    I could Tweak, have inserted a small piece of paper that covers the Center 2 pins 4 pin contacting the charge battery. After keeping it loads for about 30 min, I got 15% of costs, and the device is now on and load...

    I don't exactly know I did, but masking Center two pins allows load but disables boot... I think that its useful for anyone screwed to the top device...

    Thank you best regards &,.

    Stéphane Inguva Kumar.

  • How can I find the product key for a copy of Windows Vista, which has since been upgraded to Windows 7?

    Get a product key lost

    I have Vista Ultimate, upgraded to Windows 7 Home.

    Unfortunately, I lost the product key for Vista installation underlying.
    I used the Belarc, but this shows that the key to upgrade (which I have NOT lost!)
    Is all the same to recover the underlying key to Vista? I bought Vista Home MS directly and they sent the key to a few years back, unfortunately, I have more e-mail either. MS draw their email or pick up the transaction?
    I wan to do a fresh install / clean to a new SSD and this issue is currently prevents me to do.
    see you soon
    Ricky

    Hello

    Unfortunately, the answer does not address the issue.

    Fortunately, MS were able to trace the original transaction and provide me with the key. (The original key has been provided directly by MS by e-mail.)

    concerning

  • Digitally sign is gray in CD player unless the document has been saved with Reader Extended PDF - option activate more tools in Acrobat. Is the feature to sign without options Reader Extended broken or has it been removed?

    If we just save a PDF document, users with CD Player cannot sign because the option "digitally sign" in the upper part of the certificates bar is grayed out. According to other information that I read, the ability to sign with earlier versions of the player requires the PDF file to be registered as a Reader Extended PDF with the option enable the tools more. If I save the document in this way, our DC users can sign it. We took the latest version (2015.008.20082). This feature - the ability to fill/sign a regular document (no Reader Extended PDF) - has been removed in later versions, or is it a bug that was not shown or even fixed?

    You can use fill & sign on documents without the form fields.

  • IPad Air battery drain after 9.2.1 Update :(

    Since the update to 9.2.-, the battery life of my faithful Air iPad seems to be screwed.

    I think I was on IOS 8 or something before, when they were still on the right, instead of being now on the left, as they used to be with my first iPad. Battery drain is ridiculous now.

    I looked for solutions and made the thing to hard reboot (power button / stop and the home, flamed Maple logo button, restart, etc.) more times than I can count and have asked the entire farm advice I can find to save ((change of email to extraction, manual instead of push, turning off the motion auto-updates off (, the app update, etc.) without success

    What bothers me most is that even when it is plugged in and over, if I use it, the battery is still visibly draining.

    Reluctant to a backup of a computer and a complete reset from zero, last resort, obvs.

    If anyone has the answer? Or are we supposed to expect that Apple to orovide another patch to sort?

    Advice or suggestions received with gratitude, I don't want to take the risk of roll back to IOS 9 or 9.1 either - from what I've seen online, there was too much battery drain issues with those, too.

    Come on, Apple! It is simply not good enough!  My iPad has lost 3% just to write this! While that plugged!

    According to the useage thing battery in parameters, 85% of it is down to Safari. My use of Safari has not changed at all.

    Impossible to find a suitable place really that Apple give me an option after that, so stick under the Safari option as all the rest has nothing to do with my question bsttery, he had nothing remotely applicable under 'software update' - which was on windows! If someone can tell me a better place to put this, I would be grateful. Newbie on this forum :/

    Thanks for reading,

    Angel153

    Some iOS processes tend to run constantly in the background.

    Make sure that you don't have a lot of applications running in the background in the app selector (less than say 8 apps).

    Keep the screen brightness down to somewhere between the two allows 40-60% or more with the longevity of the battery.

    You can try my list of suggestions to see id that this helps with both performance AND battery life.

    Some of these may be superfluous, so try the ones you haven't tried.

    Try to reset all the settings in the settings under general app and in the right column under restore.

    Try stories reset and delete/reset the caches in all web browsers you use.

    If you use Safari, these features may be in the application settings under Safari.

    Other browsers have their settings inside the running application itself.

    If your iPad has been activated for iCloud, in the application settings under iCloud, to the right, under iCloud Drive, type in iCloud drive and make sure that Safari is off to save data from Safari to iCloud by car.

    Also, under iCloud in the application settings, in iCloud Drive, turn the feature off saving for all other desired apps DO NOT the data automatically on iCloud drive.

    In the application settings tab general, right under the spotlight sesrch, try disable the search under the applications who really don't need a research, as some games, remote controls, apps that are really useless to be searched, etc., in order to reduce the list to Spotlight search.

    Try to turn the reduced movement.

    This is found in the application of settings in the general tab, in the left panel.

    In the right panel, look under accessibility, look to reduce the Motion and turn this feature "On".

    You should see a significant performance increase on all models of iPad 2, 3 and 4.

    In the application settings under the general tab, in the right column, search background App update and enable this setting to "off".

    If you are willing to do (I, personally, would not recommend this), some users have reported that turn off find my phone/iPad, in the settings app in iCloud, has improved the performance of iOS, although I have no how this feature could be the cause of such a slowdown in execution, unless it's a bug in the iOS which only affects some iPad users.

    Try an another hard reset of your iPad by simultaneously pressing buttons Home and sleep/wake button until your iPad goes to the dark and restarts with the Apple logo, then release the buttons.

    Good luck!

  • BlackBerry Smartphones battery drain with High CPU (v6.0 Bundle 3049) because of the net.rim.io.impl module

    Hello

    .

    I have improved my Torch (9800) a week ago and have been noticiing battery drain issues.  The problem is NOT persistent, but is most of the time that goes well.  I am currently on OS v6.0 bundle 3049 (v6.0.0.706, Devils 6.6.0.246).  My Wifi and Bluetooth are always TURNED off.  Only by using the Bell network, for which I have all 5 bars available.

    .

    I investigated further and found that the Blackberry system software was running with more than the processor - usually in the 1970s high, 90 same high.  And this corresponded over the hours until the battery was dead.  I have since deleted all the apps I have suspecpected - such as the Office of Nice and LinkedIn.  But the problem persists.

    .

    Battery pull was made several times, as I checked and there is no update of the OS.

    .

    Now, currently, only the Basic apps are loaded (Alt-Back): home, BBM, phone, Messages, Borwser.  All other applications are closed or exit.

    .

    Further study in the modules of the system software of BB, I found that the net_rim_io_impl, is her consuming ALL the CPU.  I don't know where/what this module does - so I'm not clear on this service within the BB I can disable (OFF) to get rid of the issue.

    .

    Please see the following screenshots, the CPU for the system a little, drops as Options use a part, otherwise it goes back 90 years, if left alone: -.

    And in the system software of BB: -.

    .

    Please help and guide, with either a fix to the module, or via a workaround solution, in which some service can be stopped or a setting can be changed to avoid this battery drain.

    .

    Thank you!

    I think it could have been resolved in a second thread.

    http://supportforums.BlackBerry.com/T5/BlackBerry-torch/pls-help-100-high-CPU-utilization-V6-0-bundl...

Maybe you are looking for

  • iTunes re-download-file dmg not recognized!

    I deleted iTunes from my mac that I had an entirely different matter - unable to subscribe to or download podcasts - and several people suggested to re install. However, I am unable to re - install all versions, as the download will still for a while

  • Tecra S11 - 11 H - stop with the fan turns

    Tecra S11 - 11 H stops - seems ok, but when the screen is off, after 3 seconds, CPU-fan begins to operate.Pressing the power button / stop a few seconds turns off the machine and shut the fan. Support put me to upgrade to the latest version of the pr

  • Error Code937001 with the receiving system update tool

    I have a laptop two months old that is preinstalled with Windows 7.  There is a windows update that keeps do not install the code 937001 error updating 'tools of preparation of the system for Windows 7 64 x based systems (KB947821) April 2010 updates

  • Simulator of BB and calendar applications

    What is the best way to send me an invitation of calendar for the BB Simulator? I have one, but I'm trying to track down WRT calendar applications, but I don't know how I would go about the test...

  • BlackBerry smartphone Message new reset icon - stuck on 6 messages

    I've lived all my boxes in and used short cut 'u' to search for unread messages.  There are not.  My new alert message icon on the main screen just left of time will not return to zero.  It will go no lower than 6.  However, when new messages arrive