The RAM lot shown on Sys. Info. but the correct amount of shows mycomp/properties, black screen was crashing...

Similar Questions

• Blue screen, files lost, so did the system restore to an earlier date & now will not boot to the top. I tried nearly every program start after the start menu, it will just a black screen. Can anyone help?

  Starting from Dos programs, I found the info/Bios info. Version: not found/Dummy Bios detected / no. DC - 3 X 5 pci scsi contrller series can be found / Windows info: not found / ECC:disabled / ACD: Frozen / HDD:O. K / Processor: o.k.

  I was online, so I think it was the threat detected. Thanks for repying but since I used Microsoft XP repair CD, I tried to fix it but 1 still would not start I used remove them and reinstall the installation on CD repair and then typed in the sticker of PC product key and it worked so I ' ve go my PC now, but I am still a few problems to read the 2 last Qs I put in. " I would be grateful if you can help with thoughs, although they are not serious here yet annoying especially the keyboard Q. thank you, best regards, Darren.

• Replaced the G550 motherboard. Won't boot black screen and high.

  I replaced the motherboard in my Lenovo G550 laptop cause the old one was fried. It's the exact same model of the motherboard with a new processor. I carefully put it back together and double checked all the connections. Now when I turn it on, it made all the right noises, I hear the fan and hard drive starts, but after 2-3 seconds, the HARD drive and fan go quiet and the hard drive light turns off. The laptop stays just slowed after this point and the screen is completely black, no display at all. Any help much appreciated.

  Thank you

  THE FIXED! .. After leaving the laptop running for about five minutes, I noticed that the right part of the palmrest botton was really hot. That's where the USB slot Council separte connected to the motherboard. So I opened the laptop again once disconnected the cable flex of the USB card, turned on again and it starts without any problem. Everything works perfect now just need to find a replacement USB Board now on this side. Can't believe that the USB Board was causing the problem.

• Why after the execution of my dev C++ programming black screen may not appear?

  I complete the same program I write it and when I run it to another computer it works fine, but for mine it cannot work I want to know what problems does my pc has or something wrong in the settings?

  Hello

  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in Visual C++ Forums.

  http://social.msdn.Microsoft.com/forums/da-DK/vcgeneral/threads

• PSE10: how to create the white text box with text in black? [was: question]

  trying to create a white text box in photo shop element 10 and black text, so write pop can not understand

  Open your photo in the complete edition

  In the top menu click Layer > New > layer & OK

  Select the rectangle Selection tool

  Drag a box on the top you photo where you want to place the text

  Ensure that the chip of high color at the bottom of the tool palette is set to white or press D to default to black & white, and click the rotation arrow to move the black chip behind the white chip

  Select the paint bucket tool and click in the middle of your rectangle to fill with white

  Go to the layers palette (window > layers) and put highlight the top layer then lower the opacity to around 50% slider

  Select the T tool and type in black, then save.

• Hello, I have a problem, after the effects of the charges or starts with a full black screen. Help, please.

  after effects 5.5, mac pro

  After starting with a full black screen-edge. Then I have to force quit. Thank you

• ACPI.sys corrupted at startup disk on the black screen windows

  When I start my computer normally all I get is a black screen with my cursor on it before I reach the log on screen (but after normal of the windows startup process).  I tried Ctrl alt del and nothing happens, there is no beep or anything along those lines is.  I tried safe mode, but exactly the same thing happens, I get a black screen with white inscription around the edges, telling me that I'm in safe mode and my slider is still there and moves, but other then that is all black screen.  Ctrl alt delete doesn't work or any other key press on that I skipped.  I put in my windows XP CD and he would try to repair or reinstall the operating system but when I boot on the CD, it starts to load normally and then stops and gives me the error message "the acpi.sys file is corrupted.  Press a key to continue' when I press any button it goes upwards and brings back me to the black screen with the cursor.  I tried to go into the BIOS and turn off acpi but the loading and the startup disk produce the exact same results any bios settings I try.  Any help would be appreciated, either for obtaining windows at startup after the black screen without the startup disk or get me to the point where I can still use the CD (which I should mention that I have used before and it worked well, is the one responsible for my windows XP in the first place and who is clean and scratch free).  Thank you for any help or advice.  Oh, and I must add that I have installed any new software or whatever it is like in the last month or two, so I don't think it is something like that.

  Hello usernamerandom,

  Take a look at the sticky thread depending on which was released 21:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/why-do-i-have-a-black-screen-when-i-start-Windows/ddf978da-4ba1-49dc-8844-2407c3fc1c82

  Best regards

  Matthew_Ha

• FavIcons not showing correctly in the file Explorer, but display correctly in Internet Explorer.

  Please note: this is the opposite of what people usually describe their problem in.

  I have Windows 7 Pro 64 bit.

  My favicon display correctly in the Explorer of files (file mode) but display correctly in Internet Explorer. This intrigues me. When I open the Internet Explorer, icons for Favorites OK show to the left of the name of the shortcut file in the Favorites bar and the Favorites bar. However, when I open Windows File Explorer and check out my favorites and folders, the FavIcons are the generic icons globe, not specific icons to websites that shortcuts point to. The links work well. It's just that the FavIcons are generic globes. (Not all, but many). I want the correct FavIcons to show in the view of Windows File Explorer.

  I tried to revisit web sites and dragging the URL (and favicon) of the bar of address of IE in the "Favorites" folder again. Who has not solved the problem. I tried to go to the page of the site and to type the favicon.ico extension and save it, but windows won't let me save it. (Where can they be saved? And how would be attributed to the shortcut in the file Explorer file? Or is it not the way to solve the problem?)

  Is there a way to fix this without having to download an app/program? Is there a way to solve this problem without changing the registry? Or is the simple registry change?

  I want the correct Favicons to display in the file Explorer, and Internet Explorer.

  Please answer in plain English, not in words irritable. If you propose a procedure, please explain where everything is (how to find things click on what you recommend.)

  Thanks in advance for the help.

  IT IS THE ANSWER. A MODERATOR WOULD MARK IT AS THE ANSWER, OR REPLY TO IT, SO I CAN MARK THE ANSWER. IT SEEMS ABSURD THAT WE ARE UNABLE TO POST AN ANSWER TO OUR QUESTION AND POWER OF THE BRAND AS THE ANSWER. Thank you.

  I searched and found the answer. Also, I realized I had encountered this problem about two years ago and had saved the info of the solution in a Notepad file. On the site, the answer given by Chris H is the solution. It is to delete the icon cache of .db database and allowing windows to create a new. My problem was that the favicons for several favorite shortcuts of IE showed the purple globe (ugly) credits. After that I deleted the icon cache database file, a new file has been created and my favicons are correct for each shortcut.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/some-desktop-icons-appear-as-broken-icons/05abcead-adb1-43ba-9BB7-e308d0cc83a4

  (Both methods are given in the he.) I list the instructions for the first method, which worked for me. You can click on this page for more information).

  There are a few things you can try:

  First: (icon Cache regeneration)

  1. open Folder Options to select (round) display the hidden files and folders.
  2. open a Windows Explorer window.
  3. go to C:\Users\(User Name) \AppData\Local
  4. right click on IconCache.db and click on delete.
  5. click on Yes to confirm the deletion.
  NOTE: This deletes the file to the trash. It is safe to empty the trash when you are done.
  6. close the window.
  7 empty the trash.
  8 restart the computer.
  9. When you return, you'll notice the size of the file IconCache.db is reduced, and the update is now the current date.
  NOTE: If for some reason any IconCache.db isn't there or the size has not changed much, then just restart the computer again. You may need to restart a few times in some cases.
  10. the icon cache has been rebuilt.
  11. Open Folder Options to select (round) do not show the hidden files and folders.

  Similar instructions can be found here:

  http://superuser.com/questions/62508/what-causes-icon-corruption-in-Windows-7

• Start the computer to the top, but before the office back I get a black screen for 5 to 15 minutes long.

  Basically what the title says, "computer starts up, but before the office is up I get a black screen for 5-15 minutes long."

  I don't know the problem, looking it up and this is an annoying problem.

  Hi InterestedLearner,
   
  -Have you done recent changes made to your computer before this problem occurred?
   
  Updated the graphics driver and check if it helps fix the problem.
   
  Visit the manufacturer's Web site to do the same.
   
  Take a look at these items as well for more information on updating a driver:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

• Watch is not the right amount of RAM

  When I look at the system information, it displays the correct amount. When I look at the Task Manager, it shows only 2.3 GB on my 4 GB. And Yes, the information system shows the 4 GB for some reason any. My problem is less than 3/4 GB barrier and more that I know I should get 3 and not 2.3 instead.

  It was OK. Do you see the 1.7 GB? 4.0 - 1, 7 = 2.3 GB you see in a 32-bit Windows. So to learn more, use the Vista 64-bit. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• my player windows media apart when I try to play the video the sound works but there is no picture just a black screen and all my music files are there and play very well sound just video that gives trouble?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: my Media Player does not work when I play video all I get is the sound, the screen is just black hear any picturedoesn can't if it's a DVD or a download on the internet its just sound and a black screen?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem
  Hello
  
  1. have you made changes on the computer recently?
  
  Method 1.
  Change hardware acceleration
  You can try to change the hardware acceleration in the middle and check (you can try another level too.)
  a. right click on a space empty on the desktop.
  b. go to the resolution of the screen.
  c. click Advanced settings, and then click the "troubleshooting."
  d. set the hardware acceleration in the middle. (here you'll get the only option your video card sound support).
   
   
  Method 2.
  a. you can also check that Windows is up-to-date to check updates for your hardware.
  You can also run the difficulty below that diagnoses and identify codecs that can cause windows to become unstable or stop responding.
  http://support.Microsoft.com/GP/video_freezes_or_crashes
   
  b. if the problem persists, you can check the latest video card driver provided by the manufacturer of the PC that is compatible with Windows Vista is installed.
  You can also check out the article below which explains to update hardware drivers.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  
   

   

   

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Envy 17-j130ea: HP Envy 17-j130ea do not have access to the BIOS recovery and black screen

  Hi people,

  The laptop was waking up alone, so I decided to try to update the BIOS. Bis error. The tool has been run on 64 Win10

  The HP tool left me with a black screen and after that I tried to hold the low win + B and the power to access the Bios recovery, but there is no nothing. Tone flashing, nothing.

  I don't know if creating a flash drive with the bios will help as I don't have admin rights in another machine to create the flash drive using HP tool.

  Any ideas? Flash player won't work if BIOS recovery is not pulled up?

  All ideas are welcome.

  See you soon

  Well, I managed to solve the problem overnight without having to wait three days for anyone to answer that after the end of the week, with the following steps:

  1. I had to create a USB key with the bios by using the executable auto HP. It did not help that for some reason any that you have to have the administrator rights on a windows machine. Why aren't files available as well in a simple zip file? It would have helped a lot! Please stop HP right now provide only Autorun... it only compliates things. It took me an extra day just because I couldn't access a machine windows with administrator rights to install the executable file.

  2 - Insert the memory stick with the bios in the dead computer.

  3 - Press the Win + B and press the power button. The machine didn't do any beep or noise that all the guides say. I just kept pressing the key B + Win until I saw a recovery of the Bios screen, finally. Without the memory following stick this same step has not shown, nor does the computer make a noise or show any display, just died.

  4 - wait for the update at the end.

  My Advisor. Do not update windows, it all messed up. It is very reliable to get the memory stick. Too many windows things can interfere in the process, just don't do it from Windows, or at least create the memory stick first while you still can.

• Vista Home Prem (64-bit) - black screen with cursor in the top left

  Hello

  When I turn on the laptop, all I get is a black screen after screen of the bios at startup. Never done anywhere. He won't let me go in safe mode, it will not go to any login screen. I tried Startup Repair with Vista disc, and he says that it's been fixed, but still does not start. I've done it many times. I tried to let the part installation that moves the windows to the windows.old and creates a new copy of windows, and this did not fix it. I tried hitting CTRL-ALT-DEL in the black screen and this causing the laptop to reboot.

  If anyone has any ideas, maybe something, I may have missed. I tried almost everything people have posted here. I wouldn't completely re - install if I have to.

  Thank you for your time.

  Here is the information on the computer. Save time of requested specifications.

  Gateway MD7818u 15.6 "720 p HD for laptop computer - Intel Core 2 Duo T6400 (2.0 GHz, 800 MHz FSB, 2 MB L2 Cache) - 4096 MB 667 MHz DDR2 RAM - 500 GB HD - 802.11a/g/Draft-N - 8-Cell Lithium Ion battery - Intel GMA 4500MHD - HDMI - Ethernet Gigabit LAN - 8 x DVD - RW - 1.3MP Webcam - Vista Home Prem (64-bit).

  Hello

  Because it is a windows.old the re - install should be fixed if possible. Since then, there is not your
  the choices are a clean installation, which seems to work since the new installation of drive has done, or is a hard-
  problem of dishes with the old drive.

  Black screens are very difficult to manage. You can put the drive in another computer or in a
  external USB box and saving the data on removable media. Then put the reader in the
  computer and do a clean install.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Black screen with the white underscore

  Hello
  I started most recently problems with my PC. It's an Hp pavilion slimline s7713w. The problem is that I get a black screen with the white underscore once he gets past the start screen for Hp. I have recently updated my RAM and my monitor but I need to download the video driver. I do not have the chance to update.

  Oh don't worry, I just went out and bought another computer, but I thank very you much for your help.

• Windows 8 black screen after Login or the wake from sleep / hibernate and flickering screen

  Hello

  I have something of a nightmare with my desktop computer running Windows 8 x 64.

  I did a bit of cleaning, unplug all cables, etc. and then reconnected everything later.

  Since then, I've known the following questions: -.

  After starting and going through the connection, I am faced with a black screen.  The monitor turns on, but there is no pointer.  However, if I clicked at random, it would open a Windows App out of the splash screen, which would then become visible.  If I moved the mouse to the bottom left, to get the splash screen, he would immediately go black screen on me.  He seemed to be refusing to display the splash screen.

  With "display" black screen, I found I could get the Task Manager (Ctrl, Alt, Del) upward and there could access the desktop.  It would then execute as usual, but if I let it go into hibernation or even just having the power of the screen down, it would be black screen again, and I have to use the 'trick' Task Manager to retrieve the desktop computer.

  Sometimes, using the Manager tasks does not always, because he'll sweep between the black screen and the desktop, alternating every 5-6 seconds.  I found through the process from the Task Manager, it stops doing this.

  Now, I did a Windows 8 regenerate, without any change in the problems.  I made sure the AMD drivers have been completely updated (they were) and also physically checked all cables and cables are properly connected and the GPU / RAM etc are properly placed.

  There is no error message displayed at any time. I have also disabled Fast Boot, nothing helps.

  I examined a faulty monitor, but it worked fine for an hour or two at a time, until I got let go sleep or put into hibernation, and I'm at square one.  It would of course be a faulty GPU, or even a PSU failure, but I'm not convinced the symptoms are pointing to them.

  For me, the fact it does not display the Windows 8 start screen after that Login or Wake Up is important.  It makes me think that Windows may interfere with the display in some way?

  I can, if necessary, provide DXDIAG etc, and I "m hoping someone will have an idea of what goes wrong.  I have spent ages going through Google and others, but cannot find a solution to my problem.

  Thanks for any help or suggestion you may have.

  Conrad.

  It solved!  Traded my monitor cable and all problems solved.  Guess he had a break or something in one of the lines.

  Thanks anyway.