The range presets & comparison of low numbers

Similar Questions

• Equal a comparison on DBL post in the range and force?

  Can I make and equal comparison between double when I use the upper or lower limit compared to the exit forced when the input value is not in the range? (Line and force function)

  I tried a little experiment with this idea and it seems to work very well, but... Although I like and respect Ben I really want to have to find a way to contribute a nickel to his pension fund.

  As far as I know, primitive equality simply compares the bits and since the antiderivative of coercion is officially (assuming that I understand the documentation) supposed to force up to the limit you specify, I guess this should always work (assuming you're really out of reach, of course). The question is what's the point?

• After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• How to change the default preset list of radio stations IP Journe air 1000

  I just bought a Journe air 1000.
  I bought this product in order to listen to radio IP in addition to visualize the sideshows.

  In the manual it says that there is no Mode for Radio IP (access to the SHOUTcast Protocol, with the default channels 30-50)

  Although these default channels 30 to 50 is not bud, I was wondering how to set other radio stations that are broadcast through SHOUTcast radio in the pre-defined list and delete some of the existing presets.
  I think that this should be possible, otherwise support toshiba would not give a range of channels, but rather a fixed number of presets. Unless they expect that 40% of the presets will cease broadcasting in the future.

  I tried to use the search function, but it seems to look among the preset radio stations. In addition, this search operation is not very practical. I can't imagine doing this whenever I want to hear my favorite stations.

  To this end, I would like to save my own presets from 2-3 and clear the rest.

  There someone now how to set its own presets?

  Another question would be:
  Anyone know what operating system uses this framework. I am interested in tweaking, and this information would help me look in the appropriate bodies on how to do it.

  Hello amosxo,

  to set your favorite radio stations, you must do the following:
  1 make a Wifi connection to the Air1000
  2. choose 'Radio '.
  3. Press 'OK'--> the keyboard is displayed
  4 type the name of the radio channel you want to record
  5. choose the right channel in the list by going down with the cursor
  6. press on the symbol of the heart - set the radio channel in the folder 'My Favorites '.

  I think that it is not possible to remove the default radio channels.

  I Don t know what operating system is used in the Air1000.

  hope this helps you

  Best regards

• Write only the range specified 2D table data to a string worksheet?

  Hi all

  My problem today is a simple, but for the life of me, I can't find an answer using search. I have a table of 2D data points (values of Y) with their corresponding index numbers. When I start my VI, I retrieve a table of 10's of thousands of values, but I want to be able to extract only a few hundred values (specifically, one or two periods of a periodic sound of the waves) at the most to display in a string of spreadsheet for further calculations in Excel.

  I managed to get the data written to the string of spreadsheet easily, but I'm stumped on how to specify the range (using the index values) to allow to write in the worksheet line. I tried "delete table", but I must be missing some functionality, because I can't seem to remove all values above one index max and min specified index below (in order to simply get the values between max and min).

  Help a beginner?

  Appreciated.

  Use the subset of the table?

• How to activate the range high voltage E364Xa power adapter

  I use E364Xa power supplier code example downloaded with the driver E364Xa the Web site of NOR. I need the output in the range of high voltage voltage. Please see attachment tha. But the example code has been an error when the output voltage is greater than the range of low voltage. The default setting for the equipment is low voltage range. Does anyone know how to activate the range high voltage before you configure the output voltage?

  Problem solved. I found the order of output range VI.

• programmatically change the range structure case

  I think I already know the answer to that, but I'll ask anyway. In the attached picture, is it possible to programmatically change the range of numbers used by the case?

  Tay

  I probably would solve the problem by program, for example as follows.

  Start by Ravens idea above and use a picture of the limits of the range, for example as described here.

• Saving the effects Rack and the range markers

  I am currently working on the best way to change the non-destructive comment. But there are problems. I did this:

  1. The comment opening as a waveform.
  2. Break into segments (sentences), marking the beginning and the end of each sentence, and then convert to a range and naming.
  3. Save the beaches via menu markers.

  I find myself with audio files separate for every sentence that I can import and move first. However, if I apply effects using the effects Rack, the basket is not saved. To resolve this problem, I read in another post that I should use multitrack. I tried, but I don't know how to import/transfer/copy him varies from the already marked waveform file for the new multitrack version. The markers are there, but they do not appear in the markers Panel.

  How to import a multitrack file ranges from a waveform file?

  A common hurdle for new people to the hearing is our two different environments of editing: multitrack is a non-destructive environment for mixing different audio files to create a new work, where the waveform is a file audio single destructive Editor.  In waveform display, there is no 'projects' where a file is saved with non-destructive effects, as there is currently no standard that would allow these files to be taken over in other applications.

  Multitrack would be a much simpler method to work as your effect settings will remain in the session file, and you will not need to follow 100 separate files.  Since you already have the ranges given in your source clips, it looks like you were near.  In the markers Panel, there is a button that toggles show markers for the assets of the file of the markers of GOLD for all open files.  It is located at the upper right of the markers Panel and looks like a "Marker" icon with two lines to the right of it:

  

  When this is NOT toggled on, you would see only markers for the session file, not the assets to the breast.  By clicking on that should show all markers and you should be able to select a range of marker and drag it to an audio track.  Drag the next marker range and drop it to the right of the first element.  Soon, you should have an arrangement that looks something like:

  

  Now, hearing has two ways to add non-destructive effects in the multitrack environment: focused on the track or on clips.  Focus on the track is best if you need to apply the same effect to all of the content on the track, such as reduction of hiss or compression, although only focused on the Clip is ideal for an effect that is only required on this clip itself, as a dramatic echo or an equalizer to help a further record matches a previous.  You can add in the effects Rack Panel, or toggle the display of the mini track by clicking the fx button second from left to right, above track Panel controls:

  

  Here you can see that, while I select the effects in the 'mini' follow the advice, the selections are reflected in the biggest effects Rack Panel itself.

  If you have saved your effects of configuration you used before as a Rack Preset (the next arrow button of the "Presets:" drop-down list)

  You can find that the screening and load it into the Rack of effects for your audio track.    Each of your clips can be resized and overlap slightly in the track to create automatic crossfades to blend smoothly from one to the other with no pop.

  When you are satisfied with the edition, you can create a mixing final audio file in a standard format such as WAV or MP3 by selecting file > export > multitrack mixer > throughout the Session.  (You can also use the multitrack > Mixdown Session for the new file to quickly create a mix, but Preview menu item before the Save to disk.)

  I hope it's useful.

  Durin

• Determine the range start and stop for a partition partition

  Hello
  
  Using oracle 11.2.0.3
  
  We use the interval of separation and the partition Lems auto-generated variety. intervbal (range-hash) 1 month
  
  So what can you manually check the table and see Beach start and end of the partition is it possible to request to see data dictionary
  the range satrt and stop wishing to have script to automatically rename the generated system partitions based on the involved for example range if the generated partition has max date value
  
  waoul 3062013 want PART_201306
  
  Thank you

  >
  Checked user_tab_partitions as have sql geneerator can get the names of partition, but does not see the partition a dstop ranges.
  >
  Range of scores have NO ranges 'start and stop '. They have a high value and identification of the position.

  Data with partition key values< the="" high="" value="" and="" greater="" than="" or="" equal="" to="" the="" 'high="" value'="" of="" the="" partition="" with="" the="" next="" lower="" 'position="" id'="" goes="" into="" that="">

  You have not yet described what you need 'start' and 'stop' for.

• Flattening of the ranges that overlap

  I have data that looks like this:
  

  (SKU, from_day, to_day)
  (1, 1, 3)
  (1, 2, 8)
  (1, 7, 9)
  (2, 2, 4)
  (2, 6, 8)

  I need to reduce it to the range for each category:
  

  (1, 1, 9)
  (2, 2, 4)
  (2, 6, 8)

  There may be many more records for each category, but this should be sufficient to illustrate the problem.
  
  I have three SKU 1 positions that were in place for a range of dates. The first element was there from day 1 to 3; the second days 2 to 8; the third days 7 to 9. These days this overlap, I would like to report on the maximum range of days that overlap - that is to say, that I had an element of SKU 1 present of the day 1 to day 9.
  
  I have two SKU 2 elements that were present in the location for the date interval. The first element was there for days 2 to 4; the second from 6 to 8 days. Given that these days do not overlap, I need to report separately.
  
  Can someone help me to write SQL that will accomplish this? It seems that I could use the syntax to CONNECT BY PRIOR, but I don't see how.

  Hello

  Here's one way:

  WITH     got_grp_start     AS
  (
       SELECT     sku, from_day, to_day
       ,     CASE
                WHEN from_day <= MAX (to_day) OVER ( PARTITION BY  sku
                                                     ORDER BY      from_day
                                      RANGE BETWEEN UNBOUNDED PRECEDING
                                            AND     1      PRECEDING
                                       )
                THEN 0
                ELSE 1
            END          AS grp_start
       FROM     table_x
  )
  ,     got_grp          AS
  (
       SELECT     sku, from_day, to_day
       ,     SUM (grp_start) OVER ( PARTITION BY  sku
                                 ORDER BY          from_day
                           ) AS grp
       FROM    got_grp_start
  )
  SELECT       sku
  ,       MIN (from_day)     AS grp_from_day
  ,       MAX (to_day)          AS grp_to_day
  FROM       got_grp
  GROUP BY  sku
  ,            grp
  ORDER BY  sku
  ,            grp_from_day
  ;
  

  This is an example of a problem of the English Channel , where consecutive lines (here, means consecutive in order of from_day) into groups, but there is nothing in any individual line which indicates which group belongs to this line; We must compare each row of other rows in the same score to determine if a new group (a ' handle') started this line or not. It's a little trickier than most other neck problems, because we had (I assume) data like this:

  INSERT INTO table_x (sku, from_day, to_day) VALUES (9, 1, 5);
  INSERT INTO table_x (sku, from_day, to_day) VALUES (9, 2, 3);
  INSERT INTO table_x (sku, from_day, to_day) VALUES (9, 4, 6);
  

  When deciding if a round begins with the 3rd rank, we cannot just look at the previous 1 row; To watch all the previous lines.

  After that we have determined where each round begins, we use the analytical SUM function to see how many innings have already started, i.e. to which group each line belongs. Once we have the number of group, getting high and low group limits is just a matter of using MIN and MAX.

  Published by: Frank Kulash, October 3, 2012 18:08
  Additional explanation

• Color picker out of gamut diferent alert warning of the range image? (CS5)

  I'm confused...

  I'm editing an sRGB image.  My custom proof condition is set to sRGB IEC, preserve numbers not controlled, BY intention or RC, PCBS. The range warning is enabled.

  I add some text and color using the text color picker tool. I have activate WARNING range in that and choose a color of the range e.g. #ff0000 off. I go back to the image and the text is * no * reported as being out-of-gamut.

  In fact * no. * color marked as OOG in the selector seems to be considered OOG, once I go back to the image with sRGB IEC selected, if they are when I select other devices to simulate.

  Why the disparity between the OOG WARNING image as well as the selector tool?  The tool uses another simulation device that I have chosen?  Who should I believe?

  Ian

  I guess the warning of the range Color Picker is against your workspace CMYK in the color settings.

• Create records of the range

  Hello world:
  
  I'm trying to create new records at the base on the range of numbers available. For example, the following numbers are available:
  100
  101
  102
  103
  109
  110
  111
  202
  
  A selection list to submit, if I select '100' to the starting number, I want my ending number selection list to show only the following numbers: 101, 102 and 103. I don't want to give users that they expect to create 100-202 records (if they choose for the ending number 202) hopes. Currently, if the user selects 100 for the starting number and 202 to the end, 8 files will be created by giving this example.
  
  Any help will be greatly appreciated!
  
  Bino-

  Hi Bino,

  Try this:

  select * from
     (
        select v, lag(v,1) over (order by v) p
        from t
        where v >= 
     )
    where v  = p + 1
     and v <
     (select min(v0) from
       ( select
            case
             when (v - lag(v,1) over (order by v)) > 1 then v
             else 0
            end v0
          from t
            where  v > 
       ) tt where  v0 > 1
     )
  

  I don't think that he could be executed effectively, but it should work

  Kind regards
  Lev

• On the partition of the range

  Dear friends,
  
  I use Oracle10g. I need to create a range partition as below:
  
  
  CREATE TABLE EMP
  (
  EMPNO NUMBER 4,
  ENAME VARCHAR2 (10 BYTE),
  USE VARCHAR2 (BYTE 9),
  MGR NUMBER 4,
  HIREDATE DATE,
  SAL NUMBER (7.2).
  NUMBER (7.2), COMM.
  DEPTNO NUMBER (2)
  )
  
  PARTITION OF RANGE (hiredate)
  (
  PARTITION emp_1980 VALUES LESS THAN (TO_DATE('31/12/1980','DD/MM/YYYY')) TABLESPACE USERS,
  PARTITION emp_1981 VALUES LESS THAN (TO_DATE('31/12/1981','DD/MM/YYYY')) TABLESPACE USERS,
  PARTITION emp_1982 VALUES LESS THAN (TO_DATE('31/12/1982','DD/MM/YYYY')) TABLESPACE USERS,
  PARTITION emp_1987 VALUES LESS THAN (TO_DATE('31/12/1987','DD/MM/YYYY')) TABLESPACE USERS
  );
  
  But the problem is:
  
  (1) If no data entry is not match with the criteria above, then where he's going? I mean, not the data that don't follow the rule above which partition it will? is it possible to put the option DEFAULT partition in the partition of the range?
  I find that the DEFAULT option in the partition from the LIST
  
  (2) except that, when I add a new partition with what above, then it shows the error below:
  
  change the emp table add partition emp.emp_1988 VALUES LESS THAN (TO_DATE('31/12/1988','DD/MM/YYYY')) USERS TABLESPACE
  
  
  Error:
  "ORA-14020: this physical attribute may not be specified for the partition table."
  
  
  
  Someone could help me please, how can I solve the above problems?

  Range partitioning provides a range of values. Therefore, any value greater than the maximum value in your definitions of partition would fail. Thus, for example, 01/01/1988 and would especially error. That's why the range partitioning allows you to specify a 'best' possible values where you say 'lower values (MAXVALUE) '. Therefore, if you had included a partition "emp_maxvalue" by 'lower values (MAXVALUE)' after the partition of 'emp_1987', any value of 1988 or higher would go in the emp_maxvalue partition.

  {Because there is no minvalue specified, a value of, say, 06/01/1979 would go in the score of "emp_1980" as it is "(01/01/1980) below"!}

  Yet once, as the partitioning is a date range, you cannot Add a partition. You need to DIVIDE a partition. For example, if you had a present "emp_maxvalue" partition, in order to create the partition of emp_1988, you would be SPLIT "emp_maxvalue" into two partitions: emp_1988 and emp_maxvalue.

  Please read the documentation on the Partition maintenance in the Administrator's Guide.

  Hemant K Collette
  http://hemantoracledba.blogspot.com

• Does anyone else have a problem with the left speaker is much lower than the right?

  Any source that I use the left speaker is much lower than the left. If I put my finger on the right I can feel the pressure of air pushed but not by the left. Is it an iPhone defective 7?

  Hello, TopDog16!

  Welcome to congratulations on getting a new iPhone and Apple support communities 7.  From what I see in your post, you have any questions on the stereo speakers in your new iPhone.  I would be happy to help you with that!

  Indeed, your iPhone has holes on both right and left sides on the lower edge (on each side of the connector of the Lightning).  The holes on the right are only speaker on this edge of the phone, however.  The other speaker in the pair is at the top of the phone, where the cut is, just above the screen.  Check here to see if sound comes out.

  This page has a large diagram of the iPhone of 7 speakers (in the section entitled "Buttons and external connectors"): iPhone 7 - technical specifications

  Have a great rest of your week!

• is it possible to export each chapter in FCPX like a movie without using the tool of the range separated

  I have a movie I created with 26 chapters in there.  I want to export all the individual chapters as separate movies.   I know it's possible by making each chapter using the tool of the range and export everything that is selected.  But, I'm looking to win time by selecting all the chapters may export both.   Is this possible?

  Thanks for any help you can give me.

  NO you must do them sequentially, even if you don't have to wait for it to finish before you can start the next. Stack them just to export in a sequential manner.