The reader Installer

Similar Questions

• Most of the apps I tried to download read "Installation failed".

  Most of the apps I tried to download read "Installation failed".  They stop at about 42 percent. Reads the message, "Installation is complete although some optional components failed to install correctly. (6) why is this, and how to fix it?

  Code 6 & Code 7 http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

• Why Adobe Reader 11.0.12 patch asks for the original installation file?

  We use SCCM 2012 R2 & SCUP to deploy patches Adobe Reader and the month last day with more than 95% of the Adobe Reader 11.0.0 workstations to Adobe Reader 11.0.11 with no problems.  It was the first time we had patched an Adobe product.

  Last week we deployed Adobe Reader 11.0.12 with more than a quarter of the estate do not update the patch is looking for the original installer (AcroRead11.5.msi) in c:\windows\ccmcache\x.  The location of ccmcache is allowed out regularly as it is a location of temporary cache for the application of SCCM and hotfix deployments.

  Why the patch is looking for this temporary location when 11.0.11 didn't needlast month? Have I missed something with the way that Adobe offers its patches?

  Thank you

  For what it's worth, this might help someone else...

  Subsequently found this on the site of Adobe http://www.adobe.com/devnet-docs/acrobatetk/tools/AdminGuide/aip.html

  We do not all Applications within our workstation image, they are all applied after compilation.  Why this article applies to our situation.

• Successful installation of the reader is not successful

  Yesterday, I got Reader X on my PC and it worked fine.  When I tried to upgrade to reader XI, I downloaded it on my computer, and at the end I was told that the installation was successful, but the XI player don't show up anywhere.  This has happened 3 times.  So, I removed the drive X and tried to redownload the XI player.

  I downloaded Adobe Reader from the Internet, backup and run the exe file. In the end, I was told that the installation was successful.  However, the drive is not on my computer.  There is no drive on my desktop icon.  When I try to open a PDF document, drive is not listed as an option to open the document.

  Adobe Reader isn't in my downloads folder, even if I recorded it (when I downloaded it) and headed the exe file.

  I have a Compaq Windows XP desktop PC.

  How to properly install Reader on my PC?

  Try if you have better luck with the MSI installer: http://ardownload.adobe.com/pub/adobe/reader/win/11.x/11.0.00/en_US/AdbeRdr11000_en_US.msi

• After installation of creative suite, all the desktop icons change the reader. Thank you

  After installation of creative suite, all the desktop icons change the reader. Double-click the icons, launch reader.

  http://helpx.Adobe.com/Acrobat/KB/application-file-icons-change-Acrobat.html

• DVD drive does not appear on the screen of the reader 'computer '.

  I lost access to the DVD drive. It does not appear on the screen of the reader 'computer '.
  It starts with a disc inserted, but stops after about 20 seconds without opening all files.
  The DVD comes on when it starts first and then turns off after a few seconds.
  I have re-installed the driver of Toshiba and still no access.

  I think it all started when I installed a new WD 1 TB external hard drive which its virtual CD drive on the E: drive, which was used by the installation DVD player. I moved the external hard drive G: and drive E: letter has left vacant, but still does not work.

  Any ideas how I can fix this problem? It would be greatly appreciated.

  Optical disc drive is listed correctly in the Device Manager?

• Satellite P100 - 160 PSPAAE: Question on the driver installation instructions

  Hello.

  I recently bought a P100-160 model PSPAAE with Vista pre-installed. Like many others, I had no choice with the OS and my experience so far has left me wanting to go back to XP.

  I found the page of appropriate support for the drivers (I guess I have to use the drivers for the PSPAA) and read the instruction sheet that comes with them. There are some questions I want answered before I start on this particular cliff.

  The guidelines mention the SD card Format utility, but I see no mention of one in the list of drivers. It is included in one of the other drivers or is it not found elsewhere?

  Why the Sun Java Runtime Environment is necessary?

  I guess if my machine has no Bluetooth or Infra-red that I didn't need to load the drivers.

  Thanks in advance if anyone is able to help.

  Kind regards

  John

  Hi John, I recently went through the same process and after a few attempts, settled on the following as a reasonable XP installation (I don't need all that other stuff):

  Satellite Pro P100 (PSPAEA)

  Chipset: Mobile Intel (r) 945 PM Express Chipset
  Memory controller: 82945 PM
  I/o Controller: Intel (r) 82801GBM i/o controller hub (ICH7M)

  What I installed...

  03 - display Driver
  04 chipset Driver
  05 - network - upgrade Ethernet driver
  06 - network wireless driver
  09 - sound Driver
  10 - driver CardBus controller with UltraMedia
  12 - modem Driver
  13 - modem region Select utility
  14 Bluetooth Stack
  15 - Bluetooth monitor
  17 Hotkey Utility
  21 - SD Secure Module
  22 - SD memory card format
  28. DVD-RAM driver software
  33 user manual
  TOSHIBA fingerprint digital-software (from Vista drivers)
  TOSHIBA-disk-Creater (from Vista drivers)

  What I do not installed...

  01 - Microsoft Updates (I used Windows Update to do this)
  02. Sun Java Runtime Environment
  07. customer Intel utility
  08 Atheros Client Utility
  11 - touch pad Driver
  16 - C - infrared driver
  18 YPP/power button Utility
  19 utilities
  20 - buttons
  23 - assist
  24 - ConfigFree
  25 - zoom utility
  26 PC Diagnostic Tool
  27 CD/DVD Drive Acoustic Silencer
  29 WinDVD Creator
  30 - RecordNow
  31 DLA
  32 - DVD player

  Note: for 05 - pilot network to install correctly, I had to upgrade the Device Manager ethernet controller.

  The numbers relate to roughly the original installation instructions. I do not pretend that it's the perfect installation, only one who appears to be stable and suitable for my purposes...

  With respect to the SD memory card Format driver, I found it somewhere, but I don't remember where (sorry). It has the following file name, even if once extracted (ToshibaSDMemoryCardFormat_v2100A.exe).

  Hope this helps and please post your results as it is good to share their experiences.

  Regards, Rob

  PS one of the biggest advantage I found was much better video support nVidia for Vista drivers were not very good and assured por.

• Envy 17 j120na: 10 Windows will not start because of the driver installation failed

  History:

  I have a computer laptop j120na Envy 17 that came with windows 8.1.

  I did the free upgride for windows 10 the 18th of this month with success, but because I was not able to decrease or increase the brightness of my computer, or put it to sleep, I realized that I still had to download/update drivers. First I updated the driver GeForce since my SWsetup folder but for the other, I searched online for her, then I saw the driver download progress bar but no progress has been made. I closed the dialog close and there you go, laptop does not start, I just saw a spark between the mouse pointer and the circular blue contraption. Sometimes he shows me a BSOD with lock core auto boost with irql higher acquisition.

  Question:

  Is this a problem with the driver installation? And if so, how do I return it?

  P.s: System Restore is not an option, I restore point.

  Hi there @Aj1baba,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and assistance of HP and the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that you are receiving an error message that says "acquisition of lock core auto boost with irql high ' on your HP ENVY 17-j120na Notebook PC.

  The question could be deemed to occur by downloading the update. It is difficult to say at this stage. As to return to it, your best bet would have been the restoration of the system, but you mentioned only that a system restore does not work because you do not have restore points.

  Have you tried to go into Safe Mode?

  You have media or recovery disk?

  Have you tried to do a Reset BIOS?

  Have you tried perform a hard reset?

  You have beep codes or flashing LEDs?

  Please ensure that all Bluetooth device that you use with the laptop is disabled (including mobile phone).

  Please note: delete all USB/Bluetooth devices. Disconnect all devices of non-essential, as these can cause some problems.

  You can update all your drivers by going to the Web site the driver HP or by using the HP Support Assistant. If you enter Safe Mode, I suggest trying to erase the driver that you have downloaded your downloads (or the folder that you saved it in), so I suggest to make updates using updates of Windows or HP Support Assistant for now.

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

  Have a great day!

• Error loading operating system message is displayed after the partial installation of Windows XP

  Hello all, I was doing a clean install of Windows XP from the CD on my desktop PC.  I had reached the point where I had deleted the existing system partition and created a new system partition and had begun to load data from system to system on the CD when I accidentally stop the surge protector, shutting off the power to the computer, the screen of the monitor, etc.  After that I restored power, I turned on the PC without the XP installation CD in the CD/DVD drive.  The system posted successfully and start the CD line appeared IMMEDIATELY followed by the message "error loading operating system" on a new line.  I tried to start with the installation of XP in the drive disc, as well as with the "Ultimate Boot CD" in the player - the "Error loading operating system" message appeared in both cases.  Thanks for any help you can provide!

  The desktop PC has had a full legal work Windows XP with SP3, but I chose to reinstall from scratch, because I had problems with corrupted data in the Zone Alarm and card ATI graphics card software that caused random outages, lead to situations of re - start.  I couldn't fix the files for these 2 applications that I had this desktop PC in stock for more than 18 months and I couldn't remember the administrator password I had used.

  Once more, these error messages tell me you dΘmarrez the hard disk and no CD-ROM drive.  The message "NTLDR is missing" is read the boot sector, on most of the installations of Windows, the boot sector is usually the absolute sector 63 on the disc, using DiskProbe you will see the text of the message to the given sector.

  Your drive is perhaps at fault... or it may be absolutely nothing wrong with it!  You may need to press a key to boot from the CD, often you see a message like «Press any key to boot from CD...» "or some thing in this sense, maybe you're not a touch and the BIOS ignores the boot from CD-ROM and goes to the next boot device (hard drive).

  John

• The software installation will not see a Media Hub on XP but on Vista.

  When I run the installation software on my desktop running XP, the software says that it cannot find the media center.  Gives error 107 but I can type the IP address and the browser will find and connect to it.  When I run the software on my laptop, running on Vista, it immediately finds the Media Hub and install the software.

  I've updated the Media Hub for the latest firmware, but that did not help.  Any advice on how I can get the software to install on my desktop?

  Summer reading another post in this Ant and found my answer.

  Another question...

  Hello

  I tried to run the installation and add another PC using the installation CD every time and regardless of the operating system PC and other settings of disabled security software can't find the device even if the device has one IP address and I can browse on it.

  I configured the device with out the CD installation and everything works fine, the only problem I have is the backup and media import software install because the software cannot find the device. Is there anyway that these applications can be installed individiually with using the CD? Linksys may provide for these applications separately?

  Thank you

  Answer...

  Yes you can. On the installation for the NMH CD, locate the file installation. RES (should be about 120 MB). You can extract this file using WINRAR, and once extracted, there will be some applications that you can install on your computer manually. Two of them are the backup tool (file name is backuptool.exe) and the Import tool (file name is LinksysTools.exe)

  You can try to do this method if you do not have the hub of media with you.

  Thank you Mared1784 for this...

• Impossible to get updates, get the error "The Windows Installer Service could access."

  I use window Vista Home Basic. A few months I get the message "the Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. I could not get updates for windows or my adding free avg. My windows Defender does not turn. Can you please advise me in what we can do

  Original title: the Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team.

  System Mechanic is your troublemaker here and you're not alone! See these recent discussions:

  .

  Contact System Mechanic (iolo.com) support if necessary.

  TIP: If you still think again your registry database must be cleaned, repaired, amplified, to the point, healed, twisted, fixed, enlarged, "swept" or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions. See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

• Since the L7680 installation my usb ports are not detected...

  It seems that something in the registry has been changed.  My Western Digital Passport (mass storage device) is not detected is not my SanDisk Micro (2G).  Western Digital will work in the USB from the printer, but don't the SanDisk.  I've lost the use of all of my USB ports on my computer processor and montor.  They used to work before installation.  I uninstalled and reinstalled, I check startup items in MSCONFIG.

  I read on the Microsoft support page which the hkey_local_machine\system\currentControlSet\Control...

  should be set to activate, but I do not have this folder in XP.

  Western Digital does not know what is happening, or not SanDisk.  HP really gave me the run around way to uninstall and reinstall, but I didn't get an answer that solves the problem.

  It seems to me that since it was drivers from HP which caused my other unit to pass unnoticed, HP should be able to tell me how to solve this problem.  I do too much research for a new product.  I know I'm very frustrated, and since this is a new printer I still have time to take it for something that's going to work.  I had a Dell that has worked well, I wanted to just an upgrade.  I guess I could have updated by Dell.

  Just about the evacuation, someone has an idea what the fix is for my USB not detected ports that have been replaced by the reader on this printer?

  I added a new HP printer to my set all my ports no longer works. None of my flash drives or removable hard disks worked. I tried everything and then read "ports must be updated". My computer is older than three years and the ports of origin are 1.1 and are of most new USB 2.0 devices. Long story short, I went to microcenter and bought new ports ($11.00) and add them to my computer. All ports are now functional.

• How can I get the age of Mythology to work on Windows Vista, every time I put the disc in the computer installation screen dosnt pop up and nothing happens

  Moose title: How can I get the age of Mythology to work on windows vista

  every time I put the disc in the computer installation screen dosnt pop up and nothing happens the disc passes just for a bit and stops, and the cursor hangs a bit and I can't get the disk to the computer unless I restart the computer

  Hi rew55545,

  (1) is this problem limited only to the age of Mythology disc?

  (2) what version of the game you are trying to install?

  Method 1: Run the fixit available in the link below and check if that makes a difference

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  
  Method 2: run the fixit available in the link below to resolve any problems with DVD player.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 3:  Select the boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• vISTA can NOT DETECT THE READER of CD/DVD,

  WINDOWS VISTA cannot DETECT THE CD PLAYER, ONCE CHECK IN DEVICE MANAGER, the PROPERTIES THE SHOWS "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ». How can I get the DIFFICULTY of THIS PROBLEM?

  Thank you

  Hello

  Code 39 means that the driver is corrupted or missing.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• The reader of CD/DVD reading CD and DVD incerted incerted, no clue don't read do not?

  CD/DVD read/write driver reads CDs but is unable to read the DVDs. suggest, if there is no solution for the problem.

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.