the remote device or resource does not accept the connection - CIMC

Similar Questions

• Connection problem diagnosis - "the remote device or resource does not accept the connection detected.

  My computer is a Windows Vista Home Premium 32-bit. The problem occurred about 2 months ago, while he was still in Vista, but please note that I've upgraded to Windows 7 last night and the problem is always the same.

  My Internet Explorer, updates to the computer, iTunes and everything, EXCEPT my AOL, does not work. My connection says 'excellent '. (Hang everything on my laptop to my wireless are works fine, that my office is having this problem)
  When I click on Internet Explorer, it says "Internet Explorer cannot display the webpage", and when I click on "analyze the connection problem" said "problems discovered - the remote device or resource does not accept the connection detected.
  I talked to my internet provider Comcast all morning this problem: she said that his side internet connections work properly. She walked through me steps including reconnected the router cords, control the way in which the Internet is put in place and other things, but everything was how it was supposed to be. She suggested that maybe AOL could be the problem and to remove it because I used it, so I did, but nothing has changed. So then she told me to contact Windows... (not sure how to call technical Windows supports without having to pay $59?, but found this forum)
  Is anyone familiar with this problem and could you please help or at least point me in the right direction?
  In addition, please let me know if you need any other information on the problem.
  Thank you
  Lily

  Hello

  Try the steps from the following link

  http://support.Microsoft.com/default.aspx/KB/956196

• The remote device or resource does not accept the connection

  I have a desktop computer Windows 7 connected to my router via an ethernet cable, but when I try to go to a website on Google Chrome as Google.ca, loading the page forever without even showing the page. Finally after a long wait, it finally says that the Web page is not available. I tried to go to the Web sites by using Internet Explorer, but occurs the same result. I tried to troubleshoot the problem and it "the remote device or resource does not accept the connection" is detected, but does not set automatically. I have a wireless printer connected to my router which is online and works very well. I can even connect to my router page. But still no access to Web pages don't like my outlook.com and etc. Sometimes a go open the network and sharing Center to change the settings of the card and disable the wired ethernet only to activate it again. It works only a few times, and it's really frustrating, because it is the only computer that does not connect to the internet, even with a ethernet cable. Please find a solution as soon as possible. Thank you.

  Hello Kyle,.

  Your computer is connected to a domain network?

  If your computer is connected to a domain network, then, I suggest you follow the link below to post your query in the TechNet forums, because they have more expertise on this issue.

  Forums TechNet for Windows 7
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Otherwise, try to follow the following suggestions to solve the problem.

  "Internet Explorer cannot display the webpage" error

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.

  Also refer to:

  The remote device or resource does not accept the connection

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• IE9 "the remote device or resource does not accept the connection.

  IE9, "the remote device or resource does not accept the connection" appears when you try to open any website. My office to tell me that it is connected but cannot access any www. Meanwhile, my laptop connects fine. I have reset the settings in the internet options does not. I downloaded 'team' to connect (or similar) and asked for a connection and I thought that suspicious so uninstall this program... leaving me without access to the internet... * sigh * please can someone help me?

  Hello

  
  Method 1:
   
  Step 1:
   
  Run the network troubleshooter and see if that diagnoses the problem.
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
   
  Step 2:
   
  Reference:
   
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  See also:
  How can I troubleshoot network card?
  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems
   
  Method 2:
   
  Temporarily disable antivirus programs and firewalls.

  Disable the anti-virus software

  
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Windows Firewall
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Firewall

  http://Windows.Microsoft.com/en-us/Windows7/firewall-frequently-asked-questions

  Note: make sure that you enable the antivirus software, other security and firewall after the test programs.

  Warning:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   
  Display the results.

• The remote device or resource does not accept the connection detected

  I have a computer that cannot connect to the internet. It is connected to a LAN line through a switch that has another computer on it. The other computer works fine. The computer in question says it is connected but when I try to open IE I get the unable to load the page.  Outlook also connects and the computer does not connect to our domain controller. When I run the windows diognostic, I get the error "the remote device or resource accepts the connection detected.  I was looking on the forums and tried everything I found. I have reset the settings of Internet Explorer and unchecked the proxy server box.  I tried to replace the switch and the CAT5, even if the other computer on the switch works fine, so it isn't a problem with the hardware. I'm out of ideas.

  The computer is running windows 7 and IE 9.

  Hello

  -Is your computer connected to the domain environment?
  -You are aware of any changes made on the computer before this problem?
   
  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads
   
  Hope this information helps.

• VMware 2.0 error: the remote device or resource does not accept the connection

  Hello

  I'm new to VMWare and have not installed any softaware in a few years.

  I downloaded and installed VMware 2.0 on my laptop that runs Windows 7 Enterprise.

  The installation completed successfully and rebooted without problems.

  When I click on the icon to go to the homepage of the VMware Server I get the following error, which I can not solve: -.

  The device or resource (mw7sisuox4hwzy) is not configured to accept connections on port "8333" (where mw7sisuox4hwzy is my host name).

  Can someone help me.

  Thank you

  your local administrator username and the password will be able to access.

  iDLE-jAM | SC 2, SC 3 & VCP 4

  If you have found this device or any other answer useful please consider useful or correct buttons using attribute points

• Error message: the remote device or resource does not accept the detected connection

  I had this problem for months at this point. The common way with that I solve is to restore to a previous point. Once restored, but I can't stop or restart the PC without the same problem occurs. For this reason I only turn sleep mode and then the connection is working. But by mistake an update made me restart automatically and now I'm back to the previous question. I downloaded and saved a substantial amount of data from my last restore, so I was wondering if there is a practical solution to this problem?

  Original title: perfect connection, but can not use the web or programs that require connections

  Hello

  Thanks for posting your question on the Microsoft community.

  Who are you referring when you say, "web or programs that require connections"?

  It seems that your antivirus software is blocking the connection internet or computer is infected with a malware or a virus.

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the network troubleshooter

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If this does not help, then use method 2.

  Method 2:

  You can disable your antivirus and check if it helps.

  Reference:

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows/disable-antivirus-software#1TC=Windows-7

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  If the problem persists, use method 3.

  Method 3:

  I also suggest you use Microsoft security to check the virus or malware scanner.

  Refer to this article:

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Windows 8 is unable to connect to the internet message: "the remote device or resource does not accept the connection.

  Hello! I'm hoping to get clarification on the issue, I'll have.

  So, I restored my Toshiba PC to its factory for another question settings, I tried to solve. Now when I connect to my network (which is fully functional on other computers, you mind) it says it is connected, but every time I try to go to a browser through the wireless, it says "this page cannot be displayed", the URL has no importance. I searched for hours all the different suggestions and none of them does not seem to work. When I plug the Ethernet cable, it does not work.

  Can someone help me?

  Thank you

  Pete

  Hi Peter,.

  What web browser you use to access the Internet?

  If you use Internet Explorer, then I suggest you to try the steps from the following link:

  http://support.Microsoft.com/kb/923737

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Take a look at this link and change the proxy settings.

  http://Windows.Microsoft.com/en-GB/Windows/change-Internet-Explorer-proxy-server-settings#1TC=Windows-7

  Applies to Windows 8.

  Come back and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Error: 0: the database does not accept a connection

  Hello

  We have EMP 11.1.2.1 and EAS worked very well. We applied successfully patches of SAE 13904635 and 13904640.

  However, after you apply the patch, we received the error

  Error: 0: the database does not accept a connection

  For example, when connect us to EAS and click the EssbaseCluster1 under "Essbase Server" node we don't get something, like the list of application as such. We just get the error log.

  What could be the problem, is there anything, we had to do after you apply the hotfix?

  The essbase server seems to be running so we can pull the reports in the workspace and all.

  Thanks for all the answers.

  Have a read of the following Oracle Support doc - "impossible to add or connect to an Essbase server in Essbase Administration Services (EAS):" error: 0 in Essbase Administration Services: the database does not accept a connection "or" "error: 105: Login with token at MaxlJni" "(Doc ID 1469492.1).

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• My pc says: the remote control or resources do not accept the connection

  I have Windows 7 can download 360 total security and I did the scan and clean almost everything in the program and then you open the browser, but it does not connect to Internet and it gave me the same message, the remote or resources want except except the connection so I tried all the solutions, but it seemed that my problem is a little different from all the solutions on the Internet and someone says had an idea about my problem please come out and help me.

  Have you tried to remove total security 360?

• I'm implementing the TB on W10, but it does not accept my connection information to the blank e-mail

  I used the same settings that I use on XP no problem but it get the message "configuration could not be verified - is the name of user or wrong password? Is this a problem with Windows 10?

  Thank you. I have added the account that uses the user and the password with which I access my webmail on Virgin.
  I have manually inserted the imap Protocol. and smtp. before the names of the servers that I thought already happened automatically.
  Problem seems to be resolved.

• I can't update to of things - like iTunes, flashplayer or any error games resource or the remote device does not accept the connection

  Hi as I said in the title, whenever I have troubleshoot my connection says the remote device or resource does not accept the connection. I have a race a portable CAREB on windows 7. I can internet eyebrows and watch videos online and things like that, but I can't update things like iTunes, flashplayer or any what games that I run on my laptop. everytime I try I get a message of program control connection what ever I am updating. I checked the other computers in my house and they are all very well, as well as in home game consoles have no problem connecting to the internet and update. someone help me please

  Original title: Troubleshooting my my wireless conecction and it say the remote device or resource does not accept the connection

  Hello

  Thanks for posting in the Microsoft Community. This problem can occur because of incorrect settings of Internet Explorer. Initially, make sure you have Internet Explorer as web browser by default on the computer, refer to this link: http://windows.microsoft.com/en-us/windows/change-default-programs#1TC=windows-7

  Research I found that this problem can be solved by resetting the Internet Explorer settings. Try the following steps:

  1. Press the logo Windows + R to open the Run dialog box.

  2. Type inetcpl.cpl in the Run dialog box, press enter.

  3. Now click on the Advanced tab , and then click reset.

  4. Click apply , then ok.

   

  Note: Resetting Internet Explorer settings is not reversible. After a reset, all previous settings are lost and cannot be recovered.

  Please refer to this same thread http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/connection-problem-troubleshooting-the-remote/24bfdbf3-4914-45a8-ae45-38243b59be1c?page=1, he is older but he helped a lot of users.

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Remote device does not accept the connection since W7 re - install.

  Since then reinstall it W7 Pro, I'm now no longer able to map a network drive on a NAS on the network. The NAS device is visible to all other domestic uses (Sonos, Internet TV, etc) and can be accessed via the front view in a web browser without any problem. I can PING the device and don't get a response, so no problems with the device itself (which was untouched before, during or after re-setup of W7).

  Just cannot map a network drive!

  Tried to disable the firewall etc, but still no luck. Also checked that all relevant services are running.

  Someone has ideas that more I can do to get my laptop to talk to it as a network drive?

  When I enter the ip address of the NAS and click 'Finish' to the card, I get the following dialogue:

  The remote device or resource does not accept the connection
  The device or resource to 192.168.x.xxx is not configured to accept connections on port 'file sharing and printers (SMB).

  any help would be greatly appreciated.
  Thanks in advance.

  Hi Stuart,

  The question you posted would be better suited to the TechNet community. See the link.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope this information helps.

• remote device does not accept the connection___

  Windows 7 does not accept the connection for my site, but Xp will be, what is different about 7?

  Hello alanep,

  ·         Could you please tell us what is the remote device you are trying to access?

  ·         What version of Windows 7 is installed on your computer?

  ·         You try to connect to a remote device with Internet Explorer?

  ·         What happens when you try to connect to the remote device, you get errors?

  You can check if you have the same behavior in mode no. Add-on.

  1. click on tools on the toolbar Internet Explorer and then click on Manage Add-ons.

  2. click the name of the add-on at the top of the list of the toolbars and Extensions, and then click on disable.

  3. click on close and then test Internet Explorer.

  4. If the problem persists, open Manage Add-ons, enable the add-on that you disabled in step 2 and repeat the steps 1 to 3 for the next add-on in the list toolbars and Extensions.

  5. Repeat steps 1 through 3 until the problem is resolved or until all modules have been tested.

  Thank you

  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Error: This page cannot be displayed - the remote device and does not accept the connection. (! found)

  * Original title: this page cannot be display the remote or unit does not accept the connection. (! found)

  My internet connection works very well, I'm trying to access a page of my gate of the school we use to complete missions. I can access my web page of schools, I can access my e-mail from the school, but I can't get the e-portfolio page. It says cannot display this page - the remote device and does not accept the connection - (! found). He said to ensure that the TSL and SSL in the advanced internet options security part turned on who they are, my better protected as well the mode. I've never had a problem accessing this page before. It is only this page! Help!

  Hello Teresa,.

  The probable cause of this problem could be due to wrong settings for internet explore.

  Please see the link below, Windows 8, follow the steps to check the Proxy and DNS settings
  http://support.Microsoft.com/kb/956196/en-us

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Hope this helps, please answer with the results for assistance.