The requested flight file corrupt error flight simulator program could not start or cannot be found.
When I go to start the flight sim (Fs9) program I get this error Message requested flight file corrupted or cannot be found.
OT: File corrupted
Hello
I suggest you try the steps from the following link:
Game hangs or quits unexpectedly
http://support.Microsoft.com/kb/303032
Note: Make sure that you reset the computer in normal mode once you perform the clean boot.
If the problem persists, then I suggest you to the post office.
http://www.Microsoft.com/games/flightsimulatorx/
http://www.Microsoft.com/products/games/FSInsider/community/pages/default.aspx
http://support.Microsoft.com/GP/games-for-Windows
Tags: Windows
Similar Questions
-
original title: Remote Assistance does not work
Win XP PRO SP3
Question #1:
When you try to send an invitation to support remote I get an error message "a program could not start. Please try again. »
This error pops up before even the invitation is created, so the problem is with the creation of the invitation and not with problems of subsequent connection between the computers. The invitation is never created. This happens on several computers I own or maintain.
The event log records all errors when this happens.
I searched for hours all over the Internet and a lot of people seem to have this problem. Some it is resolved, for the most part, they needed to start a service, but the cause of their problem is not the same as mine.
After restarting the computer, sometimes the invitation creation works fine.
Other DIY suggests when the problem appears it can be corrected by running the command 'sessmgr-service' in a command line window. After executing this line it seems that the problem is resolved.
What I find disconcerting is that Sessmgr.exe is the service Remote Desktop Help Session Manager that was already running, but for some unknown reason runs this line made work again right. I'll have to experiment more.
Is it possible to debug and fix this?
Question #2:
When I can finally send an invitation it will work on the local network but not on the Internet. I can't connect to the Internet.
I'm looking at the structure and the content of the invitation to http://msdn.microsoft.com/en-us/library/cc240167(v=prot.10).aspx
In the example given here, as in the generated invitations in my experiences, the invitation contains only the LAN IP addresses (with port number) but no global address.
RCTICKET =... 192.168.1.65:3389; Jeff: 3389How the computer expert is supposed to understand the global address to which it should connect is a mystery to me.
How can I get Remote Assistance to work on the Internet?
Hello
The issue of Windows XP, you have posted is better suited for the IT Pro TechNet public. Please ask your question in the TechNet forums for assistance.
Hope the helps of information.
-
Update CPU which proved later to be bad. Replaced by original CPU. Re-installed Windows XP Home using a slipstreamed CD that I burned the original non - OEM drive that has Service Pack 2. Integrated Service Pack 3 which I got from the MS. site Everything works well except for Windows Update. The setting seem to be correct in Administrative Tools/Services. The status of the Service is "stopped". When I try to start the automatic updates from Administrative Tools/Services I receive "error 127: the specified procedure could not be found." Also "error 0 x 80240036: could not start the service automatic updates on local computer» Used the range of anti-virus and malware and found nothing. Currently using Avast 7.0.1426. I also used various tools of Fix - It MS nothing helps. Any help would be greatly appreciated. Thank you.
Hello
1. what application or antivirus security suite is installed and your current subscription?
2 Norton (another) or a McAfee application ever installed on this machine?
3. What are the fix applications that you used so far to try to fix this problem?
Try the next method and check if that helps you with the question of the 127 error you receive.
Method 1: Rdding the DLL file by doing the following:
1. Click Start and click Run, in the search box type CMD and press to enter.
2. right click on CMD in the list and click "Run as Administrator".
3. type the following command and press ENTER. Regsvr32 msvcp71.dll
4. close the command prompt window.Method 2: run the file system (CFS) Checker:
(Note: you need an XP installation disk to start the System File Checker search.)
The SFC command is used to detect and resolve problems with the files on Windows XP and Windows Vista computers. This command allows you to launch the Windows File Protection Service and allows you to analyze all integrity-protected Windows files and replace all problematic files identified.
1. click on start, and in the box to start, search type CMD
2. right click on CMD in the list and click "Run as Administrator"
3. type the following command and press ENTER. Sfc/scannow
4. close the command prompt window.For more information on scan SFC (System File Checker), please look in the link mentioned below.
http://support.Microsoft.com/kb/310747
I hope this helps.
-
Hello
Any help step by step to address this issue would be welcome
On a Fujitsu laptop running Vista and MS office 2010, when I try to access word, excel, or one of the other programs, I get the following error message - "this application could not start because the configuration - side by side - is incorrect." see the applications for more information event log"
Thank you in anticipation
Hi BackrowSteve,
1. did you of recent changes on the computer?
Method 1:
If you are facing the issue only with the Office programs, you can read the following article and check if that helps:
Method 2:
If not, then you can uninstall all existing versions of Microsoft Visual C++ Redistributable Package and install the latest version of Microsoft Visual C++ 2010 redistributable and check if it helps.
Step 1: To uninstall the package:
a. open programs and features.
b. in the list, find the Package redistributable Microsoft Visual C++ and click on it.
c. click on uninstall at the top of the list.
Step 2: Download and install the latest package depending on the version of Windows Vista, you use and see if it helps.
Package redistributable Microsoft Visual C++ 2010 (x 86)
Package redistributable Microsoft Visual C++ 2010 (x 64)
Hope this information is useful.
-
Windows error recovery. Windows could not start... _
My Dell laptop I have from 10th July indicates the following:
Windows error recovery
Windows could not start. A recent hardware or software change might be the cause.
If windows files have been damaged or misconfigured, Startup Repair can help diagnose and fix the problem. If the power was interrupted during startup, chose to start windows normall7
Start the reboot system (recommended)
Start Windows normally
The two options to return to the same screen.
I tried the menu under the F keys, but all options listed do not seem to do anything. I talked to Dell who ran a diagnostic test on the portable equipment and everything was ok. They wanted then £70 the issue above which I am unhappy that have not had the laptop for a year yet!
I would be very grateful if you could help!
Thank you
Mark
Hello mtb123,
1. have you tried the steps suggested by Srinivas R in the previous post to make a startup on your computer repair using the Windows installation disc?
2. you remember what changes you made to the computer before you start this error?
I suggest that you access the system recovery options using a Windows Vista installation disc and do a startup repair and if this fails, you can do a restore of the system from the Windows recovery environment.
You can see the previous post of Srinivas R to verify the information on the system restore.
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7
Thank you
Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think. -
"The missing config file corrupt" error message appears
When I start my laptop, I get the "Missing config file corrupt" message and I can't start windows, it falls needs the original installation cd-rom!
It seems that I do not have this cd? That I should?
I don't want to just do a restore from the hard drive that I'll lose everything.
Any ideas?
Please, I beg you!
Hello
Have you tried booting in safe mode?
If it is possible, then you can try to use the System Restore tool under Programs Accessories System Tools, you should find.Try to roll back the OS to the beginning. Well, if this procedure doesn't help then as said jmatthews you save files on the other computer and reinstall the operating system.
-
I'm testing paths to upgrade to vSphere ESX 3.5 update 4 on an IBM BladeCenter with 2 hs21 xm Server blades; I am going through several problems, and the last is the one mentioned in the subject of this thread.
In this scenario, I've upgraded successfully vCenter then I took all the virtual machines on a single host esx 3.5, I removed the other host in the cluster, and then vcenter, then I did a new install of vSphere, I reconnected it the host to the cluster then I did all the procedure with the second node. In the end, I have two installed vSphere hosts but I had to disable my cluster HA always been, I get this error when I try to configure HA agents on the hosts, but I must say that the DRS ok works.
In the release notes for vSphere, in the section known issues, I can read:
"Upgrade of an ESX/ESXi 3.x host an ESX/ESXi 4.0 host results in a successful upgrade, but VMware HA reconfiguration may fail.
When using vCenter Update Manager 4.0 to upgrade an ESX/ESXi 3.x ESX/ESXi 4.0 host, if the host part of an AP or DRS cluster, the update succeeds and the host is reconnected to vCenter Server, but HA reconfiguration may fail. The following error message in the summary of the host tab: HA agent has an error: cmd addnode failed for the main node: internal error of AAM - agent could not be started. : HA unknown error.
Solution: manually reconfigure HA by right-clicking on the host and select Reconfigure for VMware HA. »
The problem is that of workaround does not work for me, so I was wondering if someone, is once again able to help me with this problem.
Thanks in advance for your support.
Hi Caddo,
I had the same problem with one of my hosts. It was resolved after disabling HA on the cluster and enabling again.
Mirko
-
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Hello
Welcome to the community of Windows Vista answers.
First of all, we will try if we can start in safe mode.
Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.
Steps to start your computer in safe mode with networking
1. to start mode safe mode with networking, restart the computer and press the F8 key for about four to five times. You will see "Safe Mode with network" listed in the advanced options of Windows.2. Select "Safe Mode with network" and then press ENTER.
Access the link below for more information on how to start in "Safe Mode with Networking":
http://windowshelp.Microsoft.com/Windows/en-us/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspxThe system restore.
http://support.Microsoft.com/kb/936212Method 1:
The restore of the system of Windows Recovery Environment (WinRE)(a) Insert Vista DVD and boot from the DVD.
(b) that you want to start the computer from the Windows Vista DVD, you press a key, your keyboard when you see the prompt. You should now see a black screen with a white status bar at the bottom indicating that Windows is loading files... After some time, the status bar becomes completely white and you will see a screen indicating that Windows is loading. The environment of the installation of Windows continues to load and when finished you will be presented with a screen that prompts you for information about your location and language.
(c) in this screen, you must configure the language to install, time and currency format and keyboard or options for method of entry so that they are well positioned. When done, press the next button. You will now be at the main Windows Vista Setup screen where you would normally install Vista on a computer.
(d) because we want to repair the computer, you must click on repair your computer option. This will bring you to a new screen where the repair process get all facilities of Windows Vista on your computer. When finished, you will be presented with the System Recovery Options dialog box
(e) select the Vista installation you want to repair.
(f) in the system recovery options, click on system restore to restore the system.
Method 2:
Run the disk check Windows recovery environment to correct the bad sector on your hard drive
(a) Insert Vista DVD and boot from the DVD.
(b) that you want to start the computer from the Windows Vista DVD, you press a key, your keyboard when you see the prompt. You should now see a black screen with a white status bar at the bottom indicating that Windows is loading files... After some time, the status bar becomes completely white and you will see a screen indicating that Windows is loading. The environment of the installation of Windows continues to load and when finished you will be presented with a screen that prompts you for information about your location and language.
(c) in this screen, you must configure the language to install, time and currency format and keyboard or options for method of entry so that they are well positioned. When done, press the next button. You will now be at the main Windows Vista Setup screen where you would normally install Vista on a computer.
(d) because we want to repair the computer, you must click on repair your computer option. This will bring you to a new screen where the repair process get all facilities of Windows Vista on your computer. When finished, you will be presented with the System Recovery Options dialog box
(e) select the Vista installation you want to repair
(f) in the system recovery options, select command line and enter the command chkdsk/r.
For the above two steps, you can see the link below.
http://windowshelp.Microsoft.com/Windows/en-us/help/95b4c03a-ac42-49a4-a90d-8f3736a995271033.mspxOnce you perform the restoration of the system, download the updates and install them manually one by one, this should help you knowing what update causes this problem.
Concerning
Amrihta. -
Flight Simulator 9 does not start
I just installed the "Century of Flight" edition of Flight Simulator, but now it does not work the program - included flight instructor. Something is causing the software itself to hang, but I don't know what. I have no viruses, spyware, etc. on this computer. It's a PC brand new (built this last Christmas) that can run Crysis at high heat, is not a graphics issue. I am running Windows XP Media Center Edition ' 05.
All ideas, which could be suspended the game?
Hello Raze0509,
Thank you for using the Microsoft answers Forum.
Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Windows XP and would be better suited to the Windows XP community. Please visit the link below to find a community that will provide the support you want.
http://www.Microsoft.com/windowsxp/expertzone/default.mspxDave D
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Hello
It's George who has just encountered a problem with my Sony Vaio laptop last night. My priority is to find the superior application test which is located in the desktop of the computer.
The computer has had problems with a google redirect virus which all the analysis programs antivirus could not detect, and last night, the computer stops after a power failure and was not able to start the windows program.
The computer will start, but he's going to ask me directly with a message to choose three operating systems which is the Recovery Console, "not to select this [active debugger], and Windows xp home edition.
Nothing in the menu advanced options of windows would work even safe mode. I was fooling around in the recovery mode, and I have reason to believe that the system registry is corrupted for windows.
I have trie offered to the http://support.microsoft.com/default.aspx?scid=kb;en-us;30754 method
How do I recover from a corrupted registry that prevents Windows XP startup
This article was previously published under Q307545, but I don't have a windows boot cd, so I couldn't continue.
I'm looking for more help from the world wide web.
My superior applications are due within a week and help would be greatly appreciated.
Thank you for your time
sincerely
George
If you want to, you can also do another type of bootable CD, and usually, you will be able to simply copy your important files on a USB key, and then on another system.
Here's an idea:
Do you have a Hiren BootCD you can download here:
http://www.hirensbootcd.org/download.html
On the left, click on download, scroll down, choose the most recent version the download link is a little hard to see and they sometimes change the location of the download link, then you might have to look around her. Today, it is at the bottom of the page, above the drop for older versions and looks like this:
Hirens.BootCD.13.0.zip
Beware of the other links on the page to other types of downloads for other types of CD - be sure that eventually you will download the latest version which is now a file called:
Hirens.BootCD.13.0.zip
The ZIP file is large, so the download will take probably some time to complete. Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.
Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD. You must use software that includes how to burn a. ISO to a CD to create a bootable CD.
File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it. The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner. You can also use your own burning software as long as your software is able to create a bootable CD. ISO file. More modern burning programs can create a bootable CD. ISO image. Create a CD from an ISO image bootable is not the same as just the file on a CD burning.
If you need a simple and CD burning, this is a free software popular software:
Here are some instructions for ImgBurn:
http://Forum.ImgBurn.com/index.php?showtopic=61
It would be a good idea to test your new bootable CD on a computer running.
You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.
These adjustments are made before Windows tries to load. If you miss it, you will need to restart the system again.
When starting on the Hiren's CD, you will see a menu of options. Choose Mini XP. It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.
Using the Mini XP, you can access Internet, maneuvering around your system, search for files, copy files, replace the files and run the scans for malware, edit the text files (like the c:\boot.ini) etc.
There are dozens of free and useful tools included in the CD that can be used to repair your system or copy your important personal files on another device (like a USB device or an external drive) in the case where you just give up and decide to reinstall your XP (I hope that you will not make this decision).
Do, or do not. There is no test.
I decided to implement the points for a new puppy instead of a pony!
-
Design:
2 vCenter VMs version 5.5 on new W2k12. x. related and the same use facilities key SSO (default installation)
2 x fresh install of the SRM VMs version 5.5
20 + hosts vSphere 5.5 with DR/HA configured and working. Two dvSwitches (one per site) configured with the groups of port / VLAN work
Question:
Installation goes well until I needed to activate the Plugin SRM in vCenter. Plugin called "Plug-ins available" and I click on the link 'download and install '.
I had two separate fouls on both servers vCenter, both with same errors if it is compatible.
Errors:
(attached file viclient-3 - 000.log)
The request has been aborted: could not create SSL/TLS secure channel.
(attached file viclient-3 - 000.log)
The remote server returned an error: (503) server unavailable
I guess that the two are linked and probably something with SSO. Post installation on each server vCenter vCenter, at the level of the vCenter, I added the "Domain Admins" AD Group with all permissions and then properly connected and built the group with this set of credentials.
I need help to debug this further.
Thank you
************
< < Updated > >
Seems the features and functions are NOT present so you don't not sign in as '[email protected]' (SSO account by default for this "basic" configuration)
But even with this connection, I have noticed that there is NO option in the webclient service, to perform the installation of a vCenter plug-in. It does not appear in the vSphere Client (see images).
I also found it weird that the web client to vCenter illustrates SRM roles but the traditional client does not work.
Maybe it's a clue to the root cause of...
Post edited by: ArrowSIVAC 2013-10-07 to provide more details and attachments
Post edited by: ArrowSIVAC, this is related to the case of support for vmware 13384832210 This problem is solved. Several pieces here. (1) vCenters were installed secretly with local account as own databases, and this is how I usually do things (2) MRS. servers were built as separate virtual machines, VMWare vs guides guess and documents in anticipation of your SRM installation on the same server as vCenter Documentation / Installer is not clarified that you MUST use domain for MRS accounts in the multiplayer linked site facilities and if you do not, the installation is completed without error, but resources will not work. Errors have for client plugin does not work. It was the symptom, the reason was that the SRM service did not work. The service would not start and only an error in the Windows event log is 'vmware-dr stopped service' is because the connectivity issue of MRS to vCenter hosted the new SQL instance database SRM. The SRM database has been installed on the instance of vCenter server as vCenter database. And just like the installation of default vCenter I chose localhost\administrator for database owner. The database was filled with tables, but SRM has connectivity problems. The fix for this was to add "domain\user" (called mine SRMAdmin and added as a member of domain admin), add this user in SQL in the list of database users and then promoted as the owner of SRM database and define the rights on DBO. This fixed the first issue. Second issue was that SRM installation set the DSN system identification information, but does not specify that they must also be domain based accounts. The installation program is not not clear here and should only allow user domain\username when installing. After several attempts because of the root and installation methods different tried, how to get the installation complete and properly configure was to log on to the system AS the example domain account: domain\srmadmin = > Configuration System DSN by selecting "How should SQL Server verify the authenticity of the login ID?" "with integrated Windows authentication', and then the installation of SRM to the"Enter Database user credentials"value"domain\srmadmin ". Then and communication services to the vCenter SRM hosted DB database will work correctly. < See images attached benchmarks >
attached files
-
When I pass my computer on a message informing you that windows didn't start because a file is manquant-windowsroot7\system32\ntoskrnl.exe, can you help me?
* original title - computer error! *
Hi shortie083,
You did it of any material changes or software on the computer before this problem?
You can follow this link & check if the problem persists.
Hope the helps of information.
Please post back and we do know. -
1053 error Code Print spooler could not start
My print spooler does not start and I get the error code 1053
Hi troy,
I've personally encountered this error and had to reinstall my system, but try this:
- Simultaneously press the keys Ctrl + Win and should bring up a run dialog box
- Type C:\System32\Spool\Printers in the Run dialog box and a windows Explorer should appear
- In the folder, delete all the files in the folder
This will delete the documents you have sent to the printer. Then, you start the "Print spooler" service in this way:
- Simultaneously press the keys Ctrl + Win and should bring up a run dialog box
- Type net start "print spooler".
Try this and let me know how it goes.
-
On startup, I get a pop up saying that program could not start the mfc90.dll missing
How can I get rid of this error (mfc90.dll) code that opens upward at the beginning and I out X and his party? It started when I connected my phone to the computer, so I uninstalled the phone download and it still appears each time you start. Thank you MS
Original title: MS
Moved to Virus & Malware
My question was not answered and I solved the problem myself Mark SchusterRx
-
ERROR ORA-12514: TNS: could not start the extraction process
Hi Experts,
I have installed Oracle Golden Gate in the slot environment. But failed to start the extraction process
Main site (source): it is production DB up and running.
RAC 2 nodes
Oracle RAC 11.2.0.1.0
ASM
Oracle GoldenGate 11g Release 1 (11.1.1.0.0)
Enterprise Linux Server version 5.5 (Carthage)
X 64 processor type
64-bit operating system
target Site (destination):
Single stand-alone server - no CARS
Version 11.2.0.1.0 Oracle
ASM
Oracle GoldenGate 11g Release 1 (11.1.1.0.0)
Enterprise Linux Server version 5.5 (Carthage)
X 64 processor type
64-bit operating system
Getting error in newspapers below while starting the extraction process:
[oracle @ ggate] $RECOVERY: reset to initial or altered checkpoint. 2012-08-05 10:34:10 ERROR OGG-00868 Oracle GoldenGate Capture for Oracle, aaa.prm: Attaching to ASM server asm: (12514) ORA-12514: TNS:listener does not currently know of service requested in connect descriptor. 2012-08-05 10:34:10 ERROR OGG-01668 Oracle GoldenGate Capture for Oracle, aaa.prm: PROCESS ABENDING.
Getting error below when connecting with the instance asm directly:
AMT Ping utility for Linux: Version 11.2.0.1.0 - Production on August 5, 2012 11:55[oracle@ admin]$ sqlplus sys@asm as sysasm SQL*Plus: Release 11.2.0.1.0 Production on Sun Aug 5 11:16:11 2012 Copyright (c) 1982, 2009, Oracle. All rights reserved. Enter password: ERROR: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor [oracle@ ~]$ tnsping asm
: 42
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Use settings files:
TNSNAMES adapter used to resolve the alias
Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = xxx-
Scan) (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = ASM) (I
NSTANCE_NAME = + ASM1)))
OK (0 msec)Any help Please ? Regards LazyDBA Edited by: LazyDBA11g on Aug 5, 2012 12:14 AM Edited by: LazyDBA11g on Aug 5, 2012 11:25 PM Edited by: LazyDBA11g on Aug 12, 2012 4:36 AM
It should help you to TRANLOGOPTIONS ASMUSER
http://oracleabout.blogspot.com/2012/06/GoldenGate-on-ASM-GoldenGate-on-RAC.html
Maybe you are looking for
-
What shortcut keys to switch between tabs, as in previous FF pay?
In older versions of Firefox, I could pass the current and previous tab tab (not before) with the shortcut Ctrl-Tab.I can't find a shortcut for it in Version 34. Tab utilities addon is no help, either, when activated.
-
Is the 15 "Macbook Pro is really worth?
Hello everyone. New MacBook here. In my previous thread, I mentioned that I opted to get the Macbook Air 13 "as my first MB, as well as the Protection Plan AppleCare 3 years. This new discussion I start has nothing to do with the MBA. If I write this
-
Satellite C660/C660D - Webcam does not work
I recently got the Toshiba satellite c660/c660D laptop for my 21st birthday in July. It is said there is a built-in webcam, but I can't see it or find it. Also when I try to use videoconferencing on Skype, he said that it is not important which web c
-
Is there a way to turn the option to time travel?
Honestly I'm a little inoyed with the option of travel time for the iwatch you tap the scroll circle and it changes your time and you need to re adjist it every time.
-
on my Dell Inspiron XP1150 ost rycycle bin
Old Dell Inspirion lost rycycle bin-impossible to find / how to recover?