The result collection has exceeded the maximum flood control level?

Hi all

When you run a metric on an agent, I get the following message:
The following exception has occurred:
     RTMCollection: exception occurred: java.lang.UnsupportedOperationException: Collection Result Maximum Flood Control Level Exceeded
Someone at - it any information on that?
This measure could go back a few thousand lines in the result, so I added the "LIMIT_TO" in the file default collections:
    <MetricColl NAME="......."> <LimitRows LIMIT_TO="1750"/>  </MetricColl>
However, the error is still happening...

1. someone comments on the flood control message?
2. should what nr of lines I introduce LIMIT_TO?

Any comment is very appreciated!

Thank you
Ed

Flood control settings are different from the concept of Limit_to - the concept of limit affects the output of the metric. flood control settings protect the agent against a metric producing too many lines that could theoretically allow the failure of the agent.

So first of all, I would seriously consider the metric measures reports that more than 10,000 lines are ill-conceived likely metric.

In order to control the parameters of flood control, they can be adjusted if necessary for testing purposes, but I wonder again seriously any metric design requiring a large volume. The parameters are:

/**
flood control data to control the number of rows may result in collection
* keep. from the min, we will open a session but rejects silently new upcoming lines
* in the result set. If we reached the maximum, the assumption is that the
' * ' fetchlet ' is out of control (loop?) and we will report a duration
* statement.
*
* @name CollectionResults.MaximumRowsFloodControlMin
* @type integer
* @unit lines
* @default 5000
*/
private static final ConfigProperty MAXIMUM_ROWS_FLOOD_CONTROL_MIN =
() Config.newIntProperty
"CollectionResults.MaximumRowsFloodControlMin,"
5 000).

/**
flood control data to control the number of rows may result in collection
* keep. from the min, we will open a session but rejects silently new upcoming lines
* in the result set. If we reached the maximum, the assumption is that the
' * ' fetchlet ' is out of control (loop?) and we will report a duration
* statement.
*
* @name CollectionResults.MaximumRowsFloodControlMax
* @type integer
* @unit lines
* @default 10000
*/
private static final ConfigProperty MAXIMUM_ROWS_FLOOD_CONTROL_MAX =
() Config.newIntProperty
"CollectionResults.MaximumRowsFloodControlMax,"
10000);

and can be controlled via:

emctl setproperty agent-allow_new-name-value...

or by the emd.properties implementation and performing an emctl reload.

Tags: Enterprise Manager

Similar Questions

  • Maximum number of pages allowed in the PivotTable has exceeded the configured limit:

    When you try to create element based on PivotTable dynamic section of Page point as Division dim the calculated item is 'All'-> sum * and the customer again the calculated item is ' everything-> sum *. He performed the first calculation (by division), but in the following, it gives the error
    «Maximum number of pages allowed in the PivotTable has exceeded (configured limit: 1000).»

    Try to limit the result set or upgrade [MaxVisiblePages]

    See: http://obiee101.blogspot.com/2008/02/obiee-controling-pivot-view-behavior.html

    concerning

    John
    http://obiee101.blogspot.com

  • Get a Virus message "the maximum number of secrets that may be stored in a single system has been exceeded.

    How to remove "the maximum number of secrets that may be stored in a single system has been exceeded?

    Download and run malwarebytes... see if that helps

    www.Malwarebytes.org

  • How to change the maximum number of specification for the search results

    If there are more than 500 system specifications, system would show 'maximum number of 500 records has been exceeded' when the user is trying to use '%' to find all the specifications. How can I change the maximum number showed the result of research? Thank you!

    Sorry, there is no configuration desinged to change this maximum number.

    But as a temporary workaround (it is not good for your performance), you can config MaxSearchResults property to a specific number of control ctlSpecSearch in Prodika\Code\Web\gsm\BaseForms\default.aspx, such as

    Please relate your performance if you config MaxSearchResults to be more than the default value of 500.

  • When loading, error: field in the data file exceeds the maximum length

    Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

    PL/SQL Release 11.2.0.3.0 - Production

    CORE Production 11.2.0.3.0

    AMT for Solaris: 11.2.0.3.0 - Production Version

    NLSRTL Version 11.2.0.3.0 - Production

    I am trying to load a table, small size (110 lines, 6 columns).  One of the columns, called NOTES is less error when I run the load.  That is to say that the size of the column exceeds the limit max.  As you can see here, the column of the table is equal to 4000 bytes)

    CREATE TABLE NRIS. NRN_REPORT_NOTES

    (

    Sys_guid() NOTES_CN VARCHAR2 (40 BYTE) DEFAULT is NOT NULL.

    REPORT_GROUP VARCHAR2 (100 BYTE) NOT NULL,

    POSTCODE VARCHAR2 (50 BYTE) NOT NULL,

    ROUND NUMBER (3) NOT NULL,

    VARCHAR2 (4000 BYTE) NOTES,

    LAST_UPDATE TIMESTAMP (6) WITH ZONE SCHEDULE systimestamp NOT NULL default

    )

    TABLESPACE USERS

    RESULT_CACHE (DEFAULT MODE)

    PCTUSED 0

    PCTFREE 10

    INITRANS 1

    MAXTRANS 255

    STORAGE)

    80K INITIAL

    ACCORDING TO 1 M

    MINEXTENTS 1

    MAXEXTENTS UNLIMITED

    PCTINCREASE 0

    DEFAULT USER_TABLES

    DEFAULT FLASH_CACHE

    DEFAULT CELL_FLASH_CACHE

    )

    LOGGING

    NOCOMPRESS

    NOCACHE

    NOPARALLEL

    MONITORING;

    I did a little investigating, and it does not match.

    When I run

    Select max (lengthb (notes)) in NRIS. NRN_REPORT_NOTES

    I got a return of

    643

    .

    Which tells me that the larger size of this column is only 643 bytes.  But EACH insert is a failure.

    Here is the header of the file loader and first couple of inserts:

    DOWNLOAD THE DATA

    INFILE *.

    BADFILE '. / NRIS. NRN_REPORT_NOTES. BAD'

    DISCARDFILE '. / NRIS. NRN_REPORT_NOTES. DSC"

    ADD IN THE NRIS TABLE. NRN_REPORT_NOTES

    Fields ended by '; '. Eventually framed by ' |'

    (

    NOTES_CN,

    REPORT_GROUP,

    Zip code

    ALL ABOUT NULLIF (R = 'NULL'),

    NOTES,

    LAST_UPDATE TIMESTAMP WITH TIME ZONE ' MM/DD/YYYY HH24:MI:SS. FF9 TZR' NULLIF (LAST_UPDATE = 'NULL')

    )

    BEGINDATA

    | E2ACF256F01F46A7E0440003BA0F14C2; | | DEMOGRAPHIC DATA |; A01003; | 3 ; | demographic results show that 46% of visits are made by women.  Among racial and ethnic minorities, the most often encountered are native American (4%) and Hispanic / Latino (2%).  The breakdown by age shows that the Bitterroot has a relatively low of children under 16 (14%) proportion in the population of visit.  People over 60 represent about 22% of visits.   Most of the visitation comes from the region.  More than 85% of the visits come from people who live within 50 miles. | ; 29/07/2013 0, 16:09:27.000000000 - 06:00

    | E2ACF256F02046A7E0440003BA0F14C2; | | DESCRIPTION OF THE VISIT; | | A01003; | 3 ; | most visits to the Bitterroot are relatively short.  More than half of the visits last less than 3 hours.  The median duration of visiting sites for the night is about 43 hours, or about 2 days.  The average Wilderness visit lasts only about 6 hours, although more than half of these visits are shorter than the duration of 3 hours.   Most of the visits come from people who are frequent visitors.  Over thirty percent are made by people who visit between 40 and 100 times a year.  Another 8% of visits from people who say they visit more than 100 times a year. | ; 29/07/2013 0, 16:09:27.000000000 - 06:00

    | E2ACF256F02146A7E0440003BA0F14C2; | | ACTIVITIES |. A01003; | 3 ; | most often reported the main activity is hiking (42%), followed by alpine skiing (12%) and hunting (8%).  More than half of the report visits participating in the relaxation and the display landscape. | ; 29/07/2013 0, 16:09:27.000000000 - 06:00

    Here's the full start of log loader, ending after the return of the first row.  (They ALL say the same error)

    SQL * Loader: Release 10.2.0.4.0 - Production Thu Aug 22 12:09:07 2013

    Copyright (c) 1982, 2007, Oracle.  All rights reserved.

    Control file: NRIS. NRN_REPORT_NOTES. CTL

    Data file: NRIS. NRN_REPORT_NOTES. CTL

    Bad File:. / NRIS. NRN_REPORT_NOTES. BAD

    Discard File:. / NRIS. NRN_REPORT_NOTES. DSC

    (Allow all releases)

    Number of loading: ALL

    Number of jump: 0

    Authorized errors: 50

    Link table: 64 lines, maximum of 256000 bytes

    Continuation of the debate: none is specified

    Path used: classics

    NRIS table. NRN_REPORT_NOTES, loaded from every logical record.

    Insert the option in effect for this table: APPEND

    Column Position Len term Encl. Datatype name

    ------------------------------ ---------- ----- ---- ---- ---------------------

    FIRST NOTES_CN *;  O (|) CHARACTER

    REPORT_GROUP NEXT *;  O (|) CHARACTER

    AREA CODE FOLLOWING *;  O (|) CHARACTER

    ROUND                                NEXT     *   ;  O (|) CHARACTER

    NULL if r = 0X4e554c4c ('NULL' character)

    NOTES                                NEXT     *   ;  O (|) CHARACTER

    LAST_UPDATE NEXT *;  O (|) DATETIME MM/DD/YYYY HH24:MI:SS. FF9 TZR

    NULL if LAST_UPDATE = 0X4e554c4c ('NULL' character)

    Sheet 1: Rejected - error in NRIS table. NRN_REPORT_NOTES, information ABOUT the column.

    Field in the data file exceeds the maximum length.

    I don't see why this should be failed.

    Hello

    the problem is bounded by default, char (255) data... Very useful, I know...

    you need two, IE sqlldr Hat data is longer than this.

    so change notes to notes char (4000) you control file and it should work.

    see you soon,

    Harry

  • OGG-00241 error on MyKey3, Keyvalue key name exceeds the maximum length.

    Hello
    I test le GG encryption option.
    My the environment is extract (Windows) et Linux Replicat .
    J’ai set up a key encryptación 256 with KEYGEN utility in ENCKEYS file. Then extract le file I defined the option EncryptTrail Aes256 Mykey3 keyName .
    Le extraction process works well .
    But the process of replication ABEND with this error:
    ERROR OGG -00241 Error on MyKey3 name of the key , keyValue exceed le maximum length .

    I copy the file to server replicat ENCKEYS and located in the GG root directory.
    My version is:

    Oracle GoldenGate for Oracle delivery

    OGGCORE_11.2.1.0.1_PLATFORMS_120423.0230_FBO version 11.2.1.0.1

    Any idea on this issue?

    Thank you very much

    Arturo

    Hola,

    This problem has been resolved by converting the file ENCKEYS of back to the Linux format.

    Thank you

    Arturo

  • Problem with "resolution and size of the work exceeds the maximum that can be rasterized.

    Hi all

    OK, I've created a document 162,7 "x 90.6" (work plan) for a design I design. The document was created using all the flaws - I think that's where I was wrong. Illustrator is now telling me that "the combination of the size of the work and the resolution exceeds the maximum that can be rasterized" after I opened the document and when I try to add a shadow to what whatever.

    Other than vector graphics, I created in illustrator, I only have 3 180ppi and 4 300 PPI pictures tranfered just behind the camera photograpers.

    I chose:

    1 "print document" in the initial startup window.

    2. I got the size of the artboard, purge and left control the 'pixelation effects' "high (300ppi).

    I think that to let the adjustment effects of pixelization at 300ppi, where is the problem.

    What I need to create a new document or I can fix it already exists?

    Illustrator is 32-bit only and is limited to 3 GB or RAM usage, it is more a limitation to a bug.

    t has a limit to the size of a tiff file that I can export for example and you can have reached this limit.

    Try opening it in Photoshop before you start all over, and then save it in psd or tiff.

  • my iphone 5s has reached the maximum number of account creation free icloud. What should do?

    Guyz. Please help me to create an account and not to give bank details...

    my iphone 5s has reached the maximum number of account creation free icloud. What should do?

    Create a new account using your computer or a device different iOS.

    Once created elsewhere, you will be able to use that newly created

    AppleID to your iPhone.

  • Exceeding the maximum switching voltage

    Hi, I have a quick question (hopefully) on electrical safety and a switch PXI-2536.

    In a series of tests that I am performing, I have one requiring the connection of an output channel of my camera, an entry to a DMM and the positive power of my power supply (via a pull-up resistance) through the switch. The device can run from 12V - 24V and lists of plug switch technique is the maximum switching as voltage +/-12VDC, so I think I should be fine as long as I run at 12V.

    However, I have another test that does not require anything which is connected through the switch, but it affects the output of the power supply 28V to check the power circuit. I can cut the ways of the switch and shut up (by program) during this test, but I don't know if that actually gives him no protection.

    Can someone tell me if I'm in danger of damaging my switch, if I have one of these channels (a column in this case, if it makes a difference) connected to a 28V source, even if it is not open and connection?

    Thank you
    Jon

    JWanklin,

    However, I have another test that does not require anything which is connected through the switch, but it affects the output of the power supply 28V to check the power circuit. I can cut the ways of the switch and shut up (by program) during this test, but I don't know if that actually gives him no protection.

    Which is expected. (The relay will remain open despite the software telling you that it is closed).

    Surge protection is at the hardware level and does not give any feedback on the State of the software. If you try to close the switch, the software and hardware will always try to drive the FET to be closed and will always report as closed relay. The FET used on this specific switch has the feature, where it will open the circuit if it detects that the voltage at the terminals of the switch is greater than 12 volts to the chassis ground.

    Can someone tell me if I'm in danger of damaging my switch, if I have one of these channels (a column in this case, if it makes a difference) connected to a 28V source, even if it is not open and connection?

    In view of the surge protection, you are technically without danger of damage to the switch, but as the Maximum switching voltage is 12 v CC, I wouldn't recommend keeping the 28V on the column, if it is not used. Ideally, you should never have anything related to the switch which is purposfully above the maximum switching voltage.

  • Increase the maximum number of query results

    Hello

    I need to increase the maximum search results, when I'm looking for data with data-> ValueMaxCount

    I'd like to 2000

    I tried tho change it with the help of the property page and the example given.

    The result looks like this:

    Define DataFinder = Navigator.ConnectDataFinder (Navigator.Display.CurrDataFinder.Name)
    Set IndexedFileProperties = DataFinder.GetIndexedProperties (eSearchFile)
    Set IndexedProperty = IndexedFileProperties ("fileName")
    Define ValueList = IndexedProperty.GetValueList
    DataFinder.ValueMaxCount = 2000
    Define ValueList = IndexedProperty.GetValueList

    But the quantity of serach result remains at 200

    I am referring to the wrong object or do I need to increase it to a certain point?

    Concerning

    Janick

    Hi Janick,

    your script increases the number of values that are returned if you ask for all values that are indexed to a specific property (in the BROWSER QueryForm you will receive this list by clicking the... button to the right of the line a condition).

    To increase the maximum number of search results, you would use the MaxCount property for the elements of results.

    DataFinder.Results.MaxCount = 2000' in the search without the GUI

    or

    Navigator.Display.CurrDataFinder.ResultsList.Elements.MaxCount ' in the search with the BROWSER GUI

    What version of DIAdem do you use? 2015 tiara, it is also possible to determine the maximum number of search results in the search method:

    DataFinder.SearchElements (Query, 2000)

    I hope this helps.

    Good day

    Eva

  • NonLinearFitWithWeight do not erturn of error if exceeded the maximum number of iterations

    Hello

    It seems to me that the NonLinearFitWithWeight function does NOT return an error if the maximum number of iterations is reached without achieving a solution – unlike the description in the manual...

    Previously, I had reported a bug related to the NonLinearFitWithMaxIters function that has been fixed in CVI2009 (bug ID 183434). However, since this function nonlinearfitwithweight is new on CVI2009, there could well be a bug too...

    Wolfgang


  • Persistent for the subtraction of the background image collection (how to get the maximum value of each pixel in a series of images IMAQ)

    Hi all

    I have a system of LabVIEW which takes advantage IMAQ tools and features of the Vision Development Module.  A useful feature that I put in place is to be able to take a snapshot of the video stream and then subtract this single image among the subsequent images.

    What I want to do is to collect a series of images instead of one, and then create a unique image of these frameworks is just the maximum value of pixels in each pixel (a bit like a display persistent).

    It would probably be very easy to be implemented by converting the image to a table and then by doing math number on the table and then turning into an image, but I hope that someone here may know how to use the IMAQ/VDM tools to do this in a way more compact.

    Thank you very much

    MK

    How about using Max comparison IMAQ operation?

  • CP_MAIN database has reached the maximum size

    I get this pop up message that I use my computer.  It happens with everything that I use including Internet Explorer.

    "CP_MAIN database has

    reached the maximum size.

    I'm starting this post with my last update.  How can I fix this problem?

    Hi MarcDIGIUSEPPE,

    What version of Vista are you using? You have access on this computer? You are able to do anything on the computer when the message appears? The error message appears when starting the computer in Safe Mode? You can perform a System Restore to an earlier date when the error message appeared.

  • Activation of Windows7 get error 0xc004c020 "the activation server reported that the Multiple Activation key has exceeded its limit."

    I installed Win7 Pro 64 - bit about 4 - 5 times with the same original key on the same computer, but now I have a problem; When I want to activate key, always error has occurred with this 0xC004C020 with description error Code: the activation server reported that the Multiple Activation key has exceeded its limit. How do I fix this problem?

    Hello

    Please find your resolution from this link: http://technet.microsoft.com/en-us/library/ff793399.aspx

    MAKs by design have a limited number of activations. Contact the Microsoft Activation call center.

    Hope that helps.

    Kind regards

    Joel

  • "The activation server reported that the product key has exceeded its limit of unlocking". Error

    Hello

    I recently changed my motherboard and processor because my old card mother and fried CPU. I had Windows 8 Pro (64-bit) installed earlier, an upgrade to Windows 7 (64-bit). As soon as I started first of all, I got a notification asking me to re - activate my Windows but when I try to activate it with my original key, I get this error: "the activation server reported that the product key has exceeded its limit of unlocking".

    I tried to activate by phone, but instead connect to the automated system, I keep to redirect to voicemail after a few rings. Can someone help me to activate my Windows again? I'm in Karachi, Pakistan.

    The report shows that it is been activated previously, but that the material has changed considerably since the activation - hence the request for reactivation.

    Not too surprising if you traded motherboards. :))

    Telephone activation is definitely the way to go - but it's in the lap of the gods (i.. activation e. operator the MS) as to if they will allow it if the original Win7 installation was an OEM.

    My belief is that they will allow him - of some people hold that they will not :)

Maybe you are looking for

  • Why battery loses power when Satellite-A-50 is stopped?

    After a few days the battery of my Satellite-A-50 (two months ago) going from 100% to 4%, while the laptop is turned off. I tried with the start - stop function (windows 8.1) and tried to close by maintaining that the button for 5 seconds and the lap

  • I can installi Windows XP SP2 on Satellite A300-15 has

    I bought the laptop Satellite A300-15 a, where Windows Vista was preinstalled.I want to uninstall Vista and load Windows XP SP2. Can I do this? All the drivers will work once I do this? Thank you Ravi

  • Drivers recongised not?

    My wife bought me a Webcam Driverless 20Mage + Speaker Microphone 3 in 1; It will load the drivers every time that I plug BUT my pc does not overlay them. has a any bypassed this anomaly? The seller said there is a site to download the drivers, but I

  • Lost product key, still have the installation DVD

    Hello, I have a bit of concern. I recently had to reinstall my copy of Windows Vista Home Premium on my computer due to a virus. Unfortunately, during the three years that I had been able to run my computer, I had misplaced my product key. However, I

  • Dell studio one 64-bit operating system

    I have a Dell Studio one operating system 64-bit and need to know if I can install a 32-bit operating system on his computer without any problem.  I have several programs that can only be used on a 32-bit system. Please tell us if this can be done an