The results of contourc in MathScript does not match

I have a simple ".m" file which I'm trying to convert labview code by using the Mathscript node.

The matlab code is simple as follows

% Read image

IM = double (imread (image_path));

C = contourc (im, [0.8 0.8]);

I checked the latest Mathscript node. The 'imread' and 'contourc' are built-in functions supported. So far so good. So I put the code in the node (for contours in MathScript functions, I had three options: outline, outlines, contouris.) One contour is supported by the runtime, so I chose "contour").

BUT the result of Mathscript is inconsistent from Matlab. From Matlab, it is a matrix 2 X 126, while since Mathscript, it is a 2 X 200 matrix. I tried others two strokes and contouris as well, same result.

SO what is happening here. How should match the original matlab code with a function "contourc" in there? Thank you.


Tags: NI Software

Similar Questions

  • Certificate error "the name on the security certificate is invalid or does not match the site name.

    When my computer after starting the antivirus and Skype loaded,.

    I recently started to get warning of security box appear. The attachments show you what I see.

    I am told "the name on the security certificate is invalid or does not match the name of the site"

    Whether I click Yes to "do you want to proceed", nothing happens.

    How to make this security alert disappear from the start-up procedure?

    Thanks for your advice

    Marty783

    Thank you PML

    Problem is now solved.
    Was a corrupted version of IE6, which, when updated to IE8, fixed the problem.

  • DCP fails the test of Waimea - image format does not match file CPL.

    I made my film using the preset Wraptor DCP in first Pro CC for a DCP CRU drive kit. The film was sent to Deluxe/Technicolor for QC before sending it to my dealer and returned with an error report. The detailed error report is sent to me tomorrow, but the short message for me was that the aspect ratio does not match on the CPL file and therefore failed a critical review of Waimea.

    Any ideas on why this error happen?

    Waimea | D-cinema key management server. CineCert

    Yes, the STC is all square pixels. the dimensions determine the proportions for matting

    Here is a cheat for all acceptable resolutions sheet.

    Resolution / Aspect Cheat sheet report | CHAMELEON DG Creative & Design Agency BLOG

  • States of the seller that my IP address does not match my physical location of the MSN homepage

    a seller shows that my IP address does not match my physical location

    * original title - why my MSN homepage showing Bronx NY when I live there? *

    Why aren't you ask MSN? Nothing to do with this forum.

    https://support.MSN.com/default.aspx?&St=1&wfxredirect=1

  • I downloaded a game on the internet, and now my screen does not match my screen. I have two large black areas on each side of my screen. How to resize my screen to fit the screen of my computer? (and yes I tried the button expand) :))

    I have two large black areas on each side of my screen. How to resize my screen to fit the screen of my computer? (and yes I tried the button expand) :))

    Hello val2000, welcome.

    These games is managed inside of Internet Explorer? If this isn't the case, then I suggest contacting the manufacturer of your computer for the latest pgrahics drivers. If installation of those who does not resolve the problem, then try to change your resolution to one of the following values (depending on the size of your screen):

    1024 x 768
    1280 x 800 (wide, common form for laptops)
    1280 x 1024
    1680 x 1050 (widescreen)

    To change your resolution:

    1. click on START
    2. click on "Control Panel."
    3. double click on "display".
    4. click on the tab "settings".
    5. change the resolution on your cursor tab and then click on 'Apply' at the bottom right

    Let us know what happens

    Thank you! Ryan Thieman
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Order of the data rows of Gantt chart does not match the order of the lines in the timeline

    Hello

    I have a project with tasks parent and child gantt chart. It works fine except that the order of the rows in the datagrid control does not always match the order of the lines in the timeline. If it should not match? In addition, in the timeline, in some cases the period of the child does not appear directly under the parent period. Is this a bug or am I missing something? How to get the lines in the correct order?



    Tiina

    Published by: Tiina on 11.11.2010 01:08

    Tiina salvation,

    Thank you update data, which solved one of the questions. Now for the actual order of the elements in the timeline - if you take a look at the order of the data in the XML table, calendar entries are just that reflects the order in which the data was returned by the query. So although I suggested using an ORDER BY ID condition on your request, you are actually better off using a START WITH... CONNECT BY clause for resultset hierarchical of output.

    I created 2 page in your application (a copy of page 1), where you can compare the difference between the paintings pages 1 & 2, in terms of appearance and also the order of the tasks in the XML file.

    I hope this helps.
    Kind regards
    Hilary

  • File name of the Image displayed in PSE 8 does not match the file path name in Windows 7

    I recently got a new computer. I've updated on my computer Windows XP of PSE 5.0 to 8.0 PSE.  Then, I moved my files to the new computer that is running Windows 7, following the instructions that I have received on a previous post.  I copied the catalog file and the image files on the C drive of the old computer to the new computer (file catalog to the specified location in the information system;  images of my images).   Everything seems to have worked beautifully without having to go through a great struggle to reconnect.  The organzer seems to have found all of the images and I can put them in the editor as well.  However, when I look at the properties of a given image displayed full file name is that it was on XP: C:\Documents and Settings\ < username > \My Documents\My Pictures\ < folder name >-< Filename > rather than the path as it is in Windows 7, i.e. C:\Users\ < username > \My Pictures\ < file name >-< Filename >.  I am new to Windows 7 then maybe miss me something unique to Windows 7 but I'd like information.

    You are using the alias of the special folder that Vista and Windows 7 create to maintain backward compatibility (Microsoft continues to change how and where are stored the documents of users).   On Windows 7:

    C:\Documents and Settings\\My Documents\My photos

    is a special type of alias in the file:

    C:\Users\\Pictures

    (AndC:\Users \My Pictures is yet another kind of Windows 7 special alias, a 'library', which includes the folder C:\Users\Pictures.)

    Whenever an application like PES refers to the old location, C:\Documents and Settings\\My Documents\My photos, Windows that automatically converts backstage in C:\Users\\Pictures.   But Windows Explorer is configured to prevent you to access C:\Documents and Settings\ interactively - only programs like PES are able to do.  Microsoft wants users of Windows Explorer to always use the name of 'new', C:\Users\\Pictures.

    In your case, your catalog contained the old paths of XP folder, and Windows is automatically translate on the fly for new paths, unbeknownst to PSE.

    Like most of the backward compatibility hacks, this does not work perfectly.  PSE believe that the old road and new road are two completely different cases.  I'm not positive, but I think that there are opportunities for PSE to get confused by that.   When you import new pictures, they get recorded in the Catalog under the new folder paths.

    In my previous recommendation about how to move to the new computer, I had assumed you would probably change user names and locations of photo and so you would have to make a reconnection, and you would not have met it.  If I thought that you were not have need to reconnect, I would have recommended not not using this method, but rather using Backup/Restore (my first recommended method) - my bad.

    It would be nice if your current catalog and the PES works pretty well.   But there is at least a small risk that the road of PSE will get confused by old and new folder names.  The best way to avoid this would be to start again and use the backup/restore method to move your catalogue, which is more effort on your part.  But because I do not understand the risk, I can't tell you if you should be worried about it.   No doubt do tests: editing, import and edition of new photos, use view > view of the location of the folder, try to rename and move the old photos and the new folders, try the Photo Downloader, etc.

  • The drive letter for the files on my external drive does not match the designated letter MyWindowsApp, after briefly changing pots

    On my Windows 7 laptop, I briefly moved an external hard drive to a USB port to another and then back.

    The reader is referred to as F, as it was originally, but since the temporary move the path for some files now show that E.

    I went to disk management and confirmed that the drive is detected as F.

    This disrupts programs such as Adobe Premiere Elements. It always hurts new information loaded in the disc I load that is in F, but the said path E. The file is clearly on record.

    Hello

    I see that, after changing the port, the drive letter for the external drive has changed. I'll help you with this problem.

    1. What is the brand and model of the computer?

    2. what security software is installed on the computer?

    You can follow these steps to assign a letter to the external drive and check if that helps.

    1 - click on 'Start' button.

    2-right-click on "Computer" in the list that appears.

    Option 3 - Select the 'manage '. If a warning appears asking for your permission to continue, click on the OK"" button.

    4 - Choose "Disk management" in the left column of the computer management window. Find the USB in the list that appears in the gray bottom of the center column.

    5-click right on the part of the screen that represents the USB key, and then click the option "letter of change of road and railways.

    6 button - click on the 'change' in the window that opens.

    7. ensure that the radio button to "assign the following drive letter:" is selected. To the right of the present is a drop-down list with the drive letters currently not assigned to all of the drives on your local system. If you are not on a network, choose the drive letter you want for your USB key and then click on the OK"" button.

    8 - click on the 'yes' button in the confirmation box that appears.

    Refer.

    Change, add, or remove a drive letter: http://windows.microsoft.com/en-US/windows7/Change-add-or-remove-a-drive-letter

    I hope this helps.

  • The settings saved on this computer does not meet the requirements for the network

    My old laptop connects fine but my other not.  When I go to connect to the network, it says "the settings saved on this computer does not match the requirements for the network."

    Hello Tazdmx83,

    Thanks for posting on Microsoft answers Community Forums.

    This problem usually occurs on wireless network connections. I suggest that you turn off any wireless security feature by following the steps below.

    1. click on start and control access panel.

    2. double-click on network connections

    3. right click on the wireless adapter and select Properties.

    4. Select wireless networks, click the name of your wireless network and choose Properties.

    5. in network authentication, select open to disable wireless security.

    6. Please try to connect.

    If the problem persists, I suggest that you remove the connection and re-create the wireless network connections. The following Web site can help you on the creation of the wireless connection.

    http://windowshelp.Microsoft.com/Windows/en-us/help/297fa2dc-B20B-4327-B673-707a968c86801033.mspx

    Important note: Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

    If the problem persists, I suggest you reinstall the driver of card wireless network and Re-create the connection.

    Remove the driver for the card
    ========================

    1. click on start. In the start search box type "devmgmt.msc", and then press ENTER.
    2. expand "Network adapters", double-click the entry for the wireless network device.
    3. click on the "Driver" tab, click "Uninstall".
    4. click on start. In the start search box type "appwiz.cpl", and then press ENTER.
    5 remove the entries related to the wireless network adapter.

    Reinstall the driver with your CD of drivers on the manufacturer's Web site. After installation, create the connection.

    Also access the link and try to follow the steps in troubleshooting network related issues on Vista-based computer:

    http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

    It will be useful.

    Thank you and best regards,

    Srinivas

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think

  • Reinstall all the software on the new hard disk, Acrobat downloaded in the history of the order and he said the serial number does not match

    I just had to restore my computer from scratch.  I have redownloaded XI of Acrobat Standard of my history page to control on Adobe's Web site with serial number in my order history page.

    It gives me the error that the serial number is valid, but does not match the software on the computer.  He invites me to select another but Acrobat Standard XI isn't in the drop-down list.  I tried everything in the list and he said that they do not match.

    How is that possible?  What should I do?

    I recognize the problem you describe. Simply, you install an upgrade. The product "calling" it asks for is the OLDER version of Acrobat that gives you right to the upgrade. You must now enter your serial number for Acrobat X or 9, to prove eligibility.

  • "the settings saved on this network do not match the network requirement" is the message that I get when I try to connect to my wifi

    I changed my router to another wireless.  Since then, my laptop cannot connect to my wifi.  When I search my wireless network, it is exed out in red.  and the message "the settings saved on this network do not match the network requirement"... Please help

    [moved from comments]

    Hey Mike,

    -What version of Windows is installed on the computer?

    This problem usually occurs with wireless networks. I suggest you try the suggestions in http://answers.microsoft.com/en-us/windows/forum/windows_vista-networking/the-settings-saved-on-this-computer-does-not-match/a82432f2-9312-480a-b2ea-720033c73387

    Let us know if this can help, or if you have any questions.

  • When I do exercise machine of the staircase, the k/cal burned into the machine does not match with the Apple Watch of the activity

    When I do exercise machine of the staircase, the k/cal burned into the machine does not match with the Apple Watch of the activity

    Example of

    Stair machine 550 K/CAL

    Apple Watch 30 k/cal

    Hello

    During a workout on the upstairs computer, record your activity using the app to drive on your watch, choose the stairs like the type of activity no. This allows your watch to use sensors and the data most appropriate to evaluate the results of your activity (including your heart rate, which is measured continuously during the training, when the training app using).

    More information: use of the application of the workout on your Apple Watch - Apple Support

  • Toshiba satellite running Vista. The file is possibly corrupted. The file header checksum does not match the checksum calculated

    Toshiba satellite running Vista. The file is possibly corrupted. The file header checksum does not match the checksum calculated. Tried all posisible boots and no joy, continues to turn it back on! Frustration...

    Hey James,.

    I does no change, I didn't download a document from my email (from a sender of confidence). I tried to start in safe mode, just, it restarts and goes back to the corrupted checksum display... Last known good config was the same result! The only error message is one that is in the title of this post, not others. Another detail, that I forgot to add is that it does not get insofar as a logo windows before it fails, just the toshiba start screen, then either passes the corrupt message checksum or a blue screen and restarts before I can read the text on the blue screen. Thanks for your response! Any additional help would be excellent if you can. In the meantime, I'll try your methods. Thanks again
    OK, I have now managed a Startup Repair trying over and over again. Restore all settings and now looks very good, thanks for your help!
  • total size of the files of Windows 7 does not match the size of partition

    In the D: partition

    total space: 265 GB free space: 59.1 GB

    There is only one visible folder: Daisy, size: 87.4 GB from the Explorer

    Other records hidden three: info Volume system, c:\Windows\Msdownld.tmp, $RECYCLE. BIN takes up almost no space

    Of course free space does not match the file size.

    Do not partition system, no problem to update windows and restoration, sleep or page file.

    Some strange things:

    1. with the help of file size 3.4 correctly see the size of the file

    Daisy file occupies 206GB

    Once I copied the whole file to the other partition Daisy

    and the result is the record more like 2xxGB

    so I guess that 206GB is the right size

    /////////////////////////////////

    may be ignored.

    2 folder being read-only Daisy

    Even uncheck or untick read only box in the properties of the folder does no effect

    After loading, it still shows read only

    3. 'read only' does not work

    2, daisy file is read only

    but I managed to delete files inside

    ////////////////////////////////

    ////////////////////////////////

    Is it a mistake to folder structure?

    It's a newly installed windows, so I guess that windows is clean

    Hope to see the solution and identify the problem

    Thank you very much

    OK, based on your new information, the error is that Daisy is 206 GB but Windows Explorer reports it as 87GB.

    No other information seems more relevant.

    Ideas-

    1 run ChkDsk on the drive - [first of all, make sure you have a backup of Daisy or make a new backup always] in Windows Explorer, right-click on the drive & select Properties, then the Tools tab, then click the check now button, turn off the option to make repairs in first to see if there are errors or not before making any decision as repairs can delete or corrupt files which are reported in the file allocation table.

    2. find another utility that measures the size of record to help you track down all the difference here.  TreeSize Free will be repeated.

    I do not understand your comment "later, I found the reason why I can't locate the"office"is the language of auto change." It's in Chinese at first but watch the 'bureau' cmd"that this had not been mentioned before.

    Denis

  • Error: "the file is maybe damaged. the file header does not match the checksum calculated"during the installation of Windows 7/8

    * Original title: Question of re-Installation of operating system.

    I got the message during win 7 / Win 8 installation.

    "the file is maybe damaged. the file header does not match the checksum calculated.

    My config - processor Intel C2D, 2 GB of RAM, Intel motherboard, 500 GB HARD drive

    I have also replace Win 7 DVD and DVD player also replaced.

    I also reinstall my single RAM chip so many times. but the problem still exists.

    During Win XP SP 3 installation, no such message type not displayed. I can install it easily.

    Pls help me Sir, I would like to Win7 in my computer again.

    Hello

    Thanks for posting your query on the Microsoft Community.

    According to the description of the problem, it seems that you are facing the question with the reinstallation of Windows 7 on your computer.

    Because the computer does not recognize the CD - R into the DVD player probably boot order is set to hard drive first. I suggest to change the DVD boot priority in the BIOS and then try to perform the Startup Repair.

    Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    In order to make changes in the BIOS, I suggest you to contact the manufacturer of the computer.

    Method 1:

    Unplug all external devices connected to the computer with the exception of the keyboard and mouse and check if the problem persists.

    M odes 2:

    If the problem persists try the Startup Repair. It is one of the recovery tools in the System Recovery Options menu. This set of tools is on your computer's hard disk and on the Windows installation disc. To learn more about Startup Repair , you can refer to the below mentioned article:

    http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

    Method 3:

    In addition, if startup repair is not enough, you can perform a system restore, check if it helps you to solve the problem. For reference, you can see the article mentioned below.

    What are the system recovery options in Windows 7?

    http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

    Note: when you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

    Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

    Kind regards

Maybe you are looking for