The right side on Satellite M70 151 is very hot

I bought a Satellite M70-151 (17 March 2006). It's a very good computer but I have a problem: after about 10 minutes (depending on the application) the part of the right of the label «Designed to...» "and especially the portable speaker becomes hot enough. So hot that the left hand starts to the sweltering heat and work with the laptop is very clumsy. It's hotter than directly above the truck on the right side. I tried to influence with the energy-saving heat, but it did not work. The van is still on but this part of the laptop is still warming. Can anyone help?

Thank you
Jochen

Post edited by: [email protected]_DE

Hello Jochen

I don't have this camera, but I guess on this disk space HARD is placed and it's because of the HARD disk activity. It is true of my camera, but I can leave with her because I use my laptop with external TFT and external keyboard.

Like I said this is probably because of the HARD disk activity and you can try to change the HARD drive power settings in the power management.

Tags: Toshiba

Similar Questions

  • Satellite M70-151 - how to upgrade the display driver?

    Hello

    as the topic says I ran out of options to update my graphics card Radeon X 700 on my laptop...

    I tried to see here: http://de.nodevice.com/driver/Mobility_Radeon_X700/get44199.html
    After installation, I learned that he had to go on the manufacturer's site to get my drivers

    So I ended up here: http://de.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=DE
    Still no idea who was the Radeon X 700 driver, I tried every update... Most did not anyway, and when I check my graphics card driver put in says that my current driver was 5 years old.

    Taking advantage of the distraction of the online games I noticed that went it a few seconds sometimes. Most people recommend that you update all my drivers, but it seems more difficult than I imagined

    So please, help me find the right link to update my graphics card! To help speed things up a bit, I added my DxDiag report.

    Thanks for your help

    / Edit: addition of the DxDiag total was not possible due to "inappropriate language"... O.o

    ---------------
    Display devices
    ---------------
    Card name: ATI MOBILITY RADEON X 700 graphics card
    Manufacturer: ATI Technologies Inc.
    Track type: ATI MOBILITY RADEON X 700 (0 x 5653)
    DAC type: DAC (400 MHz) internal
    The device key: Enum\PCI\VEN_1002 & DEV_5653 & SUBSYS_FF021179 & REV_00
    Display memory: 256,0 MB
    Current mode: 1280 x 800 (32 bit) (60 Hz)
    Monitor: (Standardmonitor)
    Monitor Max RES:
    Driver name: ati2dvag.dll
    Driver version: 6.14.0010.6587 (English)
    The DDI Version: 9 (or higher)
    Driver attributes: Final retail
    The pilot/size date: 2005-12-12 00:41:04, 252928 bytes
    Would be WHQL logo: Yes
    WHQL Date stamp: n/a
    VDD: Non applicable
    Mini VDD: ati2mtag.sys
    Mini VDD Date: 2005-12-12 00:40:44, 1414656 bytes
    The instrument identifier: {D7B71EE2-1513-11CF-726B-08DFA1C2CB35}
    Vendor ID: 0 x 1002
    Device ID: 0 x 5653
    SubSys ID: 0xFF021179
    Revision ID: 0x0000
    Revision ID: 0x0000
    Video Accel: ModeMPEG2_C ModeMPEG2_D
    Deinterlace caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: caps Frames(Prev/Fwd/Back) = (0,0,1) (In/Out) Format (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
    {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
    {3C5323C1-6FB7-44F5-9081-056BF2EE449D}: caps Frames(Prev/Fwd/Back) = (0,0,2) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
    {552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: caps Frames(Prev/Fwd/Back) = (0,0,2) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
    {6E8329FF-B642-418B-BCF0-BCB6591E255F}: caps Frames(Prev/Fwd/Back) = (0,0,1) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
    {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
    Registry: OK
    DDraw status: enabled
    D3D status: enabled
    AGP status: enabled
    DDraw Test result: does not work
    D3D7 Test result: does not work
    D3D8 Test result: does not work
    D3d9 Test result: does not work

    Post edited by: Sarahbella

    Hi Sarahbella,

    You can download the driver on the Toshiba site. Therefore, check the link you suggested and look for your model of laptop. As far as I know Satellite M70 151 belongs to the series of PSM71E, to look for with these elements:

    Laptop > Satellite > Satellite M Series > Satellite M70 (PSM71)

    Download the driver and run the setup.exe file.

    Check this box!

  • Satellite M300 - works only one USB port on the right side

    Hello

    in the series of M, Toshiba M300 satellite (red), there is a port USB combo and something else, and also another USB port ordinary on the * left * side of the laptop. There is also a USB port on the * right * side.
    Currently, for some reason, on my right, the USB port works (in other words, the laptop detects) and my left side, where there are 2 USB ports, it does not work (in other words, it does not detect it) I have no idea how solve this problem.

    And what happens if you connect the external USB mouse?
    It work?

    > I have the toshiba recovery of the burned disc, should I use it?
    Why not, you can test it with the new operating system preinstalled too.

  • Problems after installing the new disk in the Satellite M70 151

    I have a Satellite M70-151 the hard drive gave up and was unreadable, before that I was using with my desktop via a router, that it worked very well. I had no option but to install a new hard drive now in System Manager, I get of the yellow question marks against:
    Other features:
    ? Mass storage controller
    ? Network controller
    ? Modem PCI
    ? Video controller (VGA compatible)

    I searched and searched, but can not find the drivers for these 4 things

    I have sound but only weak, I don't have a WiFi Yes feature I tried to install the good (as advised by Toshiba) Lan Driver [link to driver | http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?ID=58122&OSID=10&drive rLanguage = 42 & selectedLanguage = 13 & driverCountry = 41 & selectedCountry = 8]

    When I try to install it says "the device may not be present or could have been ejected/disconnected from the system.
    Insert or reinsert now. "
    I know I am being thick but I was under the impression that the Lan has been integrated into the laptop? :_|

    I would be sincerely grateful for all of the advice of my peers. :)

    Stuart

    First of all, we should start with basic information;
    The M70-151 Sat belongs to the series of PSM71E that's why you should choose this issue of the European driver Toshiba page if you want to download the correct drivers.

    _You will need these drivers: _

    Mass storage controller I think it is a cardbus driver
    Controller - s network a LAN or WLan card computing. First, check which driver is already installed
    Modem PCI driver modem ;)
    Display video Controller (VGA compatible) driver

    Greetings

  • Satellite Pro 6100: Office appears to be cut on the right side

    Hello

    My Office SP6100 seems to cut food on the right side. If I point with the mouse in this region, the desktop appears. I changed the rsulution display of 1024 * 768, everything, but still the same...

    Someone knows how to fix this?

    THX

    Stefan

    Hello

    Try to connect the external monitor to the computer and check if the same weird display behavior will be appears on the second monitor.
    If the same problem of screen appears on the external monitor, I presume that the malfunctioning of the graphics card!

    Have you tried updating the graphics card driver? Please do it! First remove the old version of the driver, and then install a newer version.

    I recommend using the Toshiba page display driver, but you can also check the drivers from the site www.omegadrivers.net or www.laptopvideo2go.com.

    Good luck

  • Re: Satellite L500-1KK - expansion on the right side slot?

    Hi all!

    What plastic this cover on the right side of my L500-1KK cache?

    http://www.freeimagehosting.NET/image.php?52c1b26122.PNG
    or
    http://img62.imageshack.us/i/12794829.PNG/

    He hides a housing expansion for future updates? This seems not to open it and I don't want to break anything?

    Thank you

    Hello

    This is the slot for card express here.

    > it does seem to open it and I don't want to break anything?

    Just, slightly press it to open it.

    Post edited by: Jeka-HE

  • Satellite M70-151 - not possible to install new HDD

    Hello

    I have a problem with my Satellite M70-151. bunch of old hard drive (100 GB Hitachi) reached the Windows XP screen then just ends with a blue screen a turn off laptop, immediately. I had to restore my data with an application file-rescue of another PC. It was not possible to start from old hard drive yet.

    Then I bought a Western Digital SATA II 250 GB hard drive that put my Windows XP CD in DVD player installed and tried to start. The laptop turns off as soon as the laptop computer tried to access the HARD disk.
    Thought, it was question of SATA II disk and tried a Samsung 160 GB Sata I - same result.

    BIOS recognizes the correct drives.

    If I try to boot from old hard drive, it shows the issue I mentioned first, but as before it reaches the Windows XP Boot screen before moving on to the blue screen before turning off the laptop. So start goes further than the boot with new hard drives

    The Windows XP CD I used is not the restore CD that came with the laptop, but a normal license.

    The heat is not a problem, I cleaned the CPU fan there is enough space to breathe the cold air mobile, the temperature is ok.

    * My questions are: *.

    Is there any special application running on laptops satellite, like special software of Toshiba, perhaps Backup, should I be aware of?
    What I need to preformat the hard drive, Toshiba-Hardware will recognize the hard drive?

    It would be great to get help on this issue, because I'm out of ideas. Thanks in advance!

    André

    Hello Andrew

    This behavior is very strange. I have some old Satellite M70-159 with 100 GB HARD drive. I also tested how it will work with a 250 GB HARD drive and all is well.
    On two drives, I have installed WXP using the Toshiba recovery image.

    I answer your two questions No. to install Windows XP Home edition on this model of laptop you don't need some special Toshiba application or a piece of software.
    HDD should be recognized correctly by the BIOS and the Windows XP Home edition installation procedure should work well.
    What you can try is to set the BIOS to the default settings and try again.

    The strange thing for me is that judgment. The blue screen tells me that there may be some serious hardware problem, the HARD drive controller might be. It's really not easy to say with certainty what can be the problem.

  • Need an old Bios for Satellite M70 151

    Hello everyone is able to share the old 1.30 bios for satellite m70 151

    Thanks Matthias

    Hello

    Can you please tell us why you want to have the old version of the BIOS again? You have problems with your Satellite M70?

    Only the newer BIOS versions are usually available on the Toshiba page.
    If you want to install an older version of the BIOS of your laptop, you can try to contact the ASP in your country for assistance.

  • Need drivers Sound & WiFi for my Satellite M70 151

    Please, can someone help me?

    Recently I bought on eBay a Satellite M70 - 151 of the Germany (I live in Malta). It arrived yesterday, less than any CD everything was in German. I reformatted and installed XP in English. Stupidly, I forgot about the drivers, and now I have no sound and lost WiFi.

    I searched in vain on the net for the drivers of these, the problem is that I don't know what sound card is in the notebook.

    A nice person can help me?

    Don t worry dude all Toshiba drivers can be downloaded from this Web site;
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

    There you have to choose from;
    Laptop Satellite - Satellite M Series Satellite M70 PSM71 Win XP

    Enjoy ;)

  • When I open computer on my desk about 70mm from the right side, there is a thin green vertical line

    Toshiba Satellite laptop computer, and when I open computer there is a thin green vertical line on my desk about 70mm from the right side. Is it possible that I can eliminate this myslf with your help or I will have to consider a locally recognized it professional?

    Please notify.

    Considers that Vicki.

    PS., appears not to hinder the performance of the computer. Computer is about 7 years old and running Windows Home.

    That looks like it's simply damage to the monitor.

  • Lump on the right side of my keyboard?

    Lump on the right side of my keyboard?

    See about getting the appointment of Genius on Apple store. If no official store location

    See having an authorized Apple service provider to inspect the battery for

    If she has inflated. They can inflate and assign keyboard & mouse. The battery

    In addition can also leak and be of serious consequence. An Apple store may be

    able to replace the battery if the device is not too old; they could inspect and advise you.

    A repair of iFixit guide can show how difficult the withdrawal (and reinstall) of the

    MacBook Air battery may be in their online Guides. If you see the correct guide

    for your model, they can also show the part number of the battery replacement.

    • MacBook Air repair guides - iFixit:

    https://www.iFixit.com/device/MacBook_Air

    There are two sets of guidance: 11 inches + 13 inches (in each, other models).

    Good luck and good hike!

  • Can't find the search box of google on the right side of the toolbar. He disappeared and I can't find out how to reinstall

    Have studied all the proposals help from firefox without success. Google search box on the right side of the toolbar of the web browser disappeared and can not figure out how to reinstall.

    You can't find it when you click on the Menu button top-right, then on 'Customize' below?

  • I wish to see my email address on the right side of the screen, I have emails on the left and I want the email to display on the right side.

    When I looked at my emails on the left hand of the screen; the e-mail message open on the right side of the screen. Somehow I turned off
    the tab and now when I click on the email address I have to go to another screen to read e-mail. How can I fix it?

    We need a little clarity on what "E-mail" means.

    Accounts?
    Messages?
    The addresses?

    Tools | Options | Advanced | Read and display allows you to choose between a message of openness in:

    1. a tab;
    2. its own window;
    3. an existing window.

    Also, go to view. Layout and choose between three available patterns. You can also the Folders pane (on this same submenu) checked for your visible accountability in a pane on the left.

    The above assumes you will see a menu. If you can not, press and hold the < alt > key to make it appear temporarily.

  • In Mac Mail the contents of my email does not appear on the right side in mac maila

    In Mac Mail the contents of my email does not appear on the right side as it should. I checked all the settings, anyone ever had this problem before and going to knowwhat?

    Please, back up all data. Rebuild the mailbox.

  • When I click on an image or map that is Kijiji real estate pages, open Firefox all crunched on the right side of the page. How can I fix this?

    When I click on an image or map that is Kijiji real estate pages, open Firefox all crunched on the right side of the page. How can I fix this?
    For example, I discovered an apartment ad that has various attached photos. It said click on the images to see an enlarged version. FF opens the page however the majority of the page is white and the image seems to be pushed on the right side of the page and watch as if it were bundled up against the right side shows is not the whole picture.
    What can I do to fix this?

    Thanks Cor - el,
    Just set the police minimum votes to zero, did the trick. However, I also appreciate other suggestions that I'm following now. Non-strabisme already installed. A little more difficult to find this file user.js. It any suggestions?
    Thanks again for your great help.
    See you soon,.
    Robert

Maybe you are looking for

  • Download iTunes for Windows 10

    I am trying to download iTunes for Windows 10 and get these two messages: The feature you are trying to use is on a network unavailable resource. And... Cannot remove the older version of iTunes. Contact your technical support group. Can someone plea

  • I want to replace my charger

    Hello... Sometimes my charger is not working so I want to replace my charger. kindly tell me the procedure. Thank you

  • Slideshow of office does not work on my pc?

    As I'm short slideshow in my pc for a month? but unfortunately he was arrested... I rebooted, and wheather seened options has been changed... but no response... Plzhelpme, Thank you.

  • TimerTask

    I have an application that I want to add a background process that needs to execute a task once per day. I studied with the help of another point of entry with a RealtimeClockListener and also just begin a TimerTask with a schedule fixed. Any advice?

  • How to stop the automatic zoom input / output when using my mouse?

    Whenever I try to do something that involves the use of the needle on my laptop the screen zooms in to the point where the text is too small for me to continue to work.  I use Ctrl-0 or select zoom from the menu and zoom out up to 100%.  This happens