The router just for me

I had a problem choose a router that will work for me.

I have a few computers (with Mac in there), a Bravia TV and a PS3. I'm looking for a (cat 5) wired and wireless router that has QoS so that I can make sure my packages of games to get there first.

I was watching the gigabit routers

Dual-Band Wireless-N Gigabit Router (WRT320N) Router simultaneously Wireless N dual band (WRT610N) Wireless-N Gigabit router (WRT310N)

The problem I have is that I can not say that none of them have QoS. Does anyone have advice for me?  In addition, why are these routers Wireless N and not N +? Of course, I'm new to this whole thing router so put me right!

According to your requirement, you can go for any N-series or series G Router WRT54GS, WRT54G2, WRT160N, WRT310N etc...

All three model No, you mentioned is to have option QoS to prioritize bandwidth for your devices.

Tags: Linksys Routers

Similar Questions

  • I can't find the drivers for the chipset just for my netbook

    Hi guys,.

    I can't find the drivers for the chipset just for my netbook (samsung NP355E5C-A01)

    the netbook has amd chipset A40/A50 series FCH

    Southbridge A55/A60M

    the news come from cpu - z...

    pls help ASAP!

    Hello:

    These should be the chipset drivers you need. First download listed.

    I missed the screen for W7.

    Simply choose a different tab if you use something else.

    http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2

  • How to create the icon on the desktop just for SilverLight?

    How to create the icon on the desktop just for SilverLight?

    Hello

    • Why is it you are wanting to create a shortcut?
     
    Silverlight is a plugin for Internet Explorer and other browsers, Windows Media Center is to allow video playback which supports silverlight. You cannot create a shortcut for the same.
     
  • have to hit the router works for a connection

    Since I'm router not all wireless connections in the office laptops and Xbox fine except for an old laptop to connect, I have to hit the router and the

    Hello

    Look for the updates driver WiFi (wireless) of the computer with the system manufacturer
    If integrated and, if the device manufacturer a separate device.

    Also check the website of the manufacturer of the router for firmware updates.

    Is this computer located at a distance from the router or are there obstacles on the way?
    Try to close the laptop as a test - but not too close, usually 6' away or almost.

    I hope this helps.

  • Save for the web just for display or for sending, too?

    I need to send files with layers, so I won't use it save for web or I'm going to lose, I thought a general save as. I heard that save for web translates your web language file, now these files will be worked again and, possibly, validated, but not by me right now. I send you just them.

    Is to save for web recommended any time you send files to an email, or just for display?

    Sorry I have to go now, but I'll be happy to read you tomorrow.

    Marian Driscoll wrote:

    ... There are options to include [metadata in the save for Web dialogue]...

  • my colleague and I want to buy creative cloud tighter. Is it enough with a license? Because it says that is for 2 computers (the one that looks like €60). Or do we have to buy the license of the team just for 2 people? If so, how is the latter?

    creatiuve cloud for a team of 2 people. Do I need a license to the team?

    This may also be of interest: FAQ: where can I find the terms of membership and the terms of use?

  • Counting of the icons just for Fun

    Just to bump Ghislain, how can we know how many icons are in a lesson? Y at - it an a function already established or variable within the AW 7.02? I know that a library gives you the number of how many items is in the ".a7l", but I was wondering if there was something similar to a ".a7p".

    TIA,
    Jerry

    Jerry,

    -Select the root timeline
    ---Select modify > file > properties from the menu

    Kind regards

    Andrew

  • Much time for re - connect to the router wirelessly after waking from sleep

    Hello, hope someone can help.

    I 64but Win 7 on an Acer laptop, connected to a Belkin wireless router, when the computer wakes up from his sleep, it takes 30-45 seconds for the adapter to reconnect to my network - get the spinning blue "o" for a while.

    At first I thought the wireless adapter was power down, under power options, that I made, it has a maximum performance in all cases.

    No change. Then, I thought that perhaps it was due to the computer, enter the hybrid sleep mode, so I disabled who.

    No change. Then, I checked to make sure that the SSID of the router was broadcast (it is) and that the WEP keys are the same. They are.

    I have to update my firmware on the router? The router is at least a year - I don't have it in front of me, but it supports N and g should change my wireless network card drivers (it is an internal Intel chipset).

    What else could be the cause of this delay? It is very annoying. When connected, everything works fine.

    PS, I should add that I use the power of Microsoft Signature Plan, but I have changed the power adapter, as shown options above.

    Thanks Jack. I guess I'll have to live with it for now, although I might update my firmware on the router just for fun and giggles

    I ended up changed to WEP as WPA seemed to worsen my connection (fewer bars).

  • Router WRT54G3G-ST - no internet connection - cannot reset the router

    Hello.  Some longer story certainly not short (I apologize for the length of hiking...  I don't know what is and isn't important, will scan, please...  I'm sorry...) : recently my computer (Dell XPS 400, Windows XP Service Pack 3, Internet Explorer 7 with phishing filter and pop-up blocker on, SiteAdvisor, up-to-date McAfee Anti-virus and Firewall and a router Wireless-G Linksys WRT54G3G-ST with its AC adapter plugged into the wall power outlet and a network cable directly connected to my computer.) received a drive-by generic.DX!12536d125737 Trojan horse without me download whatever it is one of the few sites I visit every day.  My internet connection has crawled, and I have now no connection at all.

    I've been making McAfee good volunteers forums help quick and very helpful...  They recommended Malwarebytes Anti-Malware for me, I downloaded my own second computer (a laptop) on my flash drive, then on my infected computer.  I ran, tried adapting so recommended, and only then discovered the Trojan horse killed my broadband entirely.  I scanned with it anyway and he quickly found and deleted / quarantine 11 Adware.MyWebSearch related files, but nothing else.  Then, they gave me a link to a patch off updater file and tells me scan in SafeMode until nothing else has been found and check if it has fixed my lack of broadband access.  I did, Malwarebytes found nothing else, but unfortunately I still had no broadband.

    Then, they recommended WinsockXPFix.  Which I ran and he did all his OK registry changes, I restarted if necessary but still no broadband unfortunately.  WinsockXPFix using make things worse for me with the registry changes, did he?  I used the backup of the registry to save the registry before changed files before running.  Should I come back since I don't always have a broadband connection?  McAfee volunteers kindly then told me that I had to hard reset the router, but I tried many times with no fortune.  I'm at a loss as to what, if anything, do we hope to get my broadband, please...

    It is very confusing with many different variants for resetting routers, and what should I do to my router model (Variations: unplug this cable/adapter exactly where; pressed the reset button between 5 and 30 seconds, the computer restarts, or no, 1 or 2 minutes between different steps, waiting or not - and for all these exactly when in the restart procedure.).

    I have reset once before with the reset button, page of routers to http://192.168.1.1default admin password, then it changed to security, etc. but this time I can't make it work.  I'm happy as possible to try once again to get an appointment by perhaps, something please...  When I go to http://192.168.1.1 now, or to any other address, Internet Explorer gripes at me that I am offline, which is annoyingly correct.  I do not have and never had Zone Alarm, but disable my McAfee Firewall does not help.  IPCONFIG at the command prompt gives me an address of 169.254.X.X assigned Windows

    I was going to use the routers Wizard installation CD to try to reset the router, and if that didn't try to get its firmware version number to perhaps upgrade.  But I was going to ask here first of all for expert advice because I read a lot of things that can go wrong during the upgrade of the firmware.  However, analysis the CD (without launching the CD). McAfee found the virus W32/HLLP. Philis.ini in the file "D:\_desktop.ini" on the CD.  McAfee didn't delete the file, I don't know why.
    I scanned my computer together several times and no infections have been reported.  I downloaded the file several times, both www.virustotal.com (39 online antivirus) and virusscan.jotti.org (20 online virus scanners) and every time each virus scanner didn't report any possible infection.  My updated virus scanner McAfee reported a false positive and still Jotti and VirusTotal 2 scanners from McAfee report the file as own probable?  Is "_desktop.ini" a file legitimate Linksys?  I have not found any information on Linksys forums about this.  My problems just keep multiplying... mentioning problems more...

    Find this suspicious file on the CD I decided to download instead the Linksys Setup Wizard
    (Router product page: http://www.linksysbycisco.com/US/en/support/WRT54G3G-ST/download )
    File: http://downloads.linksysbycisco.com/downloads/WRT54G3G-ST_SetupWizard_4_2_06042008.zip)
    my flash drive, then on my infected computer that is connected to the router.  I ran it (downloaded the version of the file: 4.2.0.007 - original version CD Setup Wizard: 4.0 print on CD front) and immediately gave it 1 of the 3 options: Mobile broad band only, high flow only WAN, or WAN high throughput and high speed Mobile.  I don't know what damage, if any, I caused by continuing.
    It seemed that he was trying to go in the entire router configuration process.  I thought it would take me to some options to reset the router, as I read in the user's Guide, and besides - it is my understanding.  The installation process stopped at only 30% done "router not found, make sure that the router is connected correctly and try again."  How many Overwrite original router configuration files I did continue?  I'm quite confused.  The wizard does not check if the router has previously been set up before setting up again?  Unlike version caused my router to not be detected by the Setup Wizard?  Is the horse of Troy generic.DX!12536d125737 who killed my trash to wide band my computer settings so badly that my router is undetectable/essentially not configured?

    Update of sorts: I tried one last time to reset the router, and I unplugged/plugged the network cable.  The fact that I had still no broadband on my Dell XPS main use computer that is connected to the Linksys router.  However, my laptop, with map data in the router, was for the first time able to find network - constant connection and speed is great, it's what she allways has been on the laptop (the Trojan/router problems, my laptop only for broadband with the data in the laptop card.).  Perhaps the cable network was simply not re-connected properly/entirely for 1 of the many attempts of resetting, indeed, it could also explain the downloading, installation wizard is not able to find the router/only get 30% done.

    Laptop prompt IPCONFIG/all with data card Sprint inserted into the slot of your laptop:
    IP = 174.158.XX.XXX (Sprint)
    Subnet mask = 255.255.255.255
    68.28.90.91 = DNS servers
    68.28.82.91

    Laptop prompt IPCONFIG/all with Sprint data card inserted in the router:
    192.168.1.1XX = IP address
    Subnet mask = 255.255.255.0
    Default gateway = 192.168.1.1
    = 192.168.1.1 DHCP server
    Servers DNS = 192.168.1.1

    Since my laptop started to work with the data card into the router, I have not tried again to reset the router and I tried the downloaded installation wizard.  I don't want to spoil anything about it any further as I have (?) / the Trojan has, and I need expert advice, please, about which of the 2 if not more, I do (first?).  On my laptop, typing http://192.168.1.1 in Internet Explorer Gets the ToolTip for the user name and password, but I did not.  I read that you should not reset the router or (?) Is it just 1 or two please?) upgrade the firmware unless the computer is connected directly to the router - that is not my laptop.  On my other computer that still has no broadband, Internet Explorer still says I am offline when you type http://192.168.1.1 in.  My IP address on it is still a 169.254.X.X assigned Windows and a command PING 192.168.1.1 prompt returns with 'Destination host unreachable.', as it has been always and even with all the other addresses (with the exception of 169.254.X.X).

    Boring 2nd "update" of all kinds, my apologies for the length, as always: I've been so focused on the horse of Trojan/broadband killing that cluelessly largely forgot I switched with AOL.  Try AOL dial-up does not work, madness thickens...  Software AOL tells me to check my connection, but all the phone cords are connected as should be.  I plugged a phone directly into the wall jack and I get the tone, I can call OK and the phone rings and receives calls OK.  State of the devices-Modems-Properties-Device Manager says that the modem is not working properly, and "resources" tab shows no conflicts.  Query Modem on the diagnosis tab seems OK to me, as does the journal, but I'm certainly not an expert like allways.  I change all the settings from anywhere.
    I noticed and that check IPCONFIG it says that my IP address is 192.168.1.100 it lasts maybe that someday (then goes back to 169.254.X.X), maybe more, I don't know - I don't check that often to define (should I?).  Meanwhile my broadband, or my works switched.  I can PING 192.168.1.100, but nothing else.  I am convinced the wrong killed Trojan horse my broadband and dial-up - I've never had a problem with my prior V.9x DFVc Modem 56 K Conexant D850.  In addition, I am not convinced the Trojan horse is not still lurk everywhere on my computer, I think that it's...

    Any help with the restoration of my high speed/dial-up is greatly appreciated, please...  Thank you!

    Hello.  There has been entirely too long since I answered, I'm sorry.  There is no excuse, and it is terribly rude to me...  You took the time to read and answer me, and I appreciate very much that in effect.  I apologize for being late, I'm sorry...

    After that I left my message, I downloaded several virus/spyware scanners, etc from my laptop on my USB key, then my other computer for some in-depth analysis necessary.  Was one I downloaded Network Magic that somehow, some way fixed both my high speed/dial-up internet on my main computer is connected to the router WRT54G3G-ST.  I don't know what/how he fixed my connection, but the connection high speed flow works brilliantly since...  Network Magic has worked for me, and I highly recommend it to all those who have stubborn lack of internet problems (caused by Trojans to this) that I did.  There is no guarantee this will work, but it did for me in my amazement.

    Network Magic, as is the Linksys is owned by the parent company Cisco.  Respectfully to all the knowledgeable experts here (which clearly I'm not), I don't want to venture out of the limits.  I'm trying to simply hope to be useful and save a few headaches for both you volunteers and users... buy a new router or the computer was in my mind, with all due respect, I recommend suggesting to try Network Magic users if the reset of the router/all other fails, please.  I used WinsockXPFix/WinsockFix utility before using Network Magic, I don't know if it matters.

    I also upgraded my package of McAfee, I installed on my old software rather than uninstall the first, which caused errors in all things virus scanner a critical need.  I install right now, but it caused some delay to refocus my time.  Some virus scans found many Trojan horses, some were same / in the same folders that killed my broadband - which stopped me in my tracks to ensure a clean uninfected.

    Certainly, it doesn't fully explain the long time, and I'm sorry, once again.  It's just that I'm being cautious and slow in all this.  To answer the first very good idea, you did: Unfortunately, there is no room on my other computer to connect the router in to, which even so caused frustration (at the time).  I forgot to include this in my post new length of countless things to see / do not forget...  It was a brilliant idea, however, I thank you...

    Thank you for your time and your help, I appreciate it sincerely...  Thank you...  I think and hope that this matter is resolved.  It seems to be, the router works perfectly as it always has, and I am positively happy as can be in this regard.  Thank you...  Peace...

  • What is the best OSX for a MBP 13 "2.5 GHz Corei5 (mid-2012) MD101LL/A?

    This is a really nice refurb. computer on which I just bought and represents a HUGE upgrade from my dying MacBook 10 year. It was time!  The MBP came with the Mavericks installed and I was going to go all the way to El Capitan, but reading some of the glowing alternation, dismal studied so that OS stopped me in my tracks!  And I know that once I have 'get rid of the Mavericks' it's about gone (unless I do a backup Time Machine now) so I read reviews that Mavericks is stable enough, but here again... it's three years! And specifically, I bought this computer so that I could use all the latest bells and whistles of the latest version of the software (which hopefully is also best w / my iPhone 5 s).  I have also reviewed the upgrade just for Yosemite (which I checked, I can always download from Apple's site). I need to get this recent computer up and running as soon as possible and do not have the time to * round experience with different operating systems.  Thus, any orientation/opinions/expertise on this topic would be greatly welcomed!

    Also, I used to transfer data from an old computer to a new one using target disk Mode and then reinstalled the software was necessary, but I recently read the subject to make a clone of my old HDD and it would be a much easier way to transfer my data.  The thing is, my old MacBook is under Snow Leopard, so... I think that cloning would actually work in this case?  Thanks in advance for any help!

    You can't run a system with less of it originally shipped with the operating system.

    In General, you should always pass to the last possible system like you meet the specs for, as long as you do not have "must have" applications that do not meet specifications. The idea that the updates/updates cause problems is probably derived from discussions that see you here. ASC is like an emergency room for people to have problems, especially the sick, those who come here. Hundreds of thousands of people pass without difficulty, never here and go merrily on their way. In addition to the improved features, updates/improvements important security fixes.

  • The Router Configuration page

    Whenever I open my router configuration page, I am never prompted to enter a user name or password. Of course, it is a security problem for me. I even reset my router to its factory default settings. Yet, it is not yet solve the problem. I also want to be able to change the user name and password to make it more secure. It is indeed a cause for concern? If so, anyone have any suggestions to solve this problem?  Thank you

    Hello

    Configuration page of your router is nothing to do with the Windows operating system.

    You will need to contact the router manufacturer for instructions on how to change the default settings.

    See you soon.

  • PhotoSmart HP 7520: HP7520 "offline" but works via EWS (and is connected to the router)

    The printer used to work, do not know why it stopped, but the problem occurred several months ago.

    HP7520 said it is connected to the network, same SSID, and the ip address is in the same range.  More importantly, I can print test pages and scan through the integrated Web server.  If the printer is on the same network as the netbook.

    Material used is a netbook from Toshiba Windows 7 (32 bit) / and an Asante (WEP2-Personal, WPS) router, internet Optimum/Cablevision.  Only security is the Windows Firewall, which I disabled it for the areas and home networks.  The network is defined on a home network.  NetBook, iPhone, Android, Roku all connect properly to the network.

    The properties list to the printer the printer as being associated with a Standard TCP/IP Port - IP in the same range as the printer.

    I rebooted everything several times, released and renewed the ip address, check the router manufacturer for the latest version of the firmware is installed, installed the HP Assistant troubleshooting, reinstalled printer drivers and the problem has not changed a bit.

    Any suggestions?  I have read several posts have reported similar problems, but have not found a solution.

    Yes, it did.  I wish I had thought to post here months ago.  Thank you!

  • Reinstall/locate the music files for the slideshow PSE8

    I may have inadvertently deleted the music for slide show files.  I am running windows 7, install the dvd disc to PSE8 and would like to know the correct path of the file where they are located in the installed program file.  If they are not there, can these be copied and located on the installation disc.  I prefer not to do a reinstallation of the program just for them.  Thanks in advance.

    C: ProgramData\Adobe\Photoshop Elements\8.0\Music

  • I am trying to create layers with a JPEG originally published in LR6. I converted the JPEG in a TIF format for my PES 11. PSE does not recognize the file for purposes of superposition; None of the routes command works. Just to see if PES was grateful the

    I am trying to create layers with a JPEG originally published in LR6. I converted the JPEG in a TIF format for my PES 11. PSE does not recognize the file for purposes of superposition; None of the routes command works. Just to see if PES was grateful the file at all, I tried to turn the file. Fortunately, he rotates the photo and turned it back. Why the program allow me to create layers?

    You click on Expert in pse before trying to add layers?

    Or it is possible that the image is 16-bit/channel.

    In photoshop elements go to Image > Mode and click on 8-bit/channel and see if that makes a difference.

  • 9.3.4 disabled wifi on an Ipad, but it connects to the router. Just don't download at all

    IPad was working fine, but I've updated to 9.3.4. Now Wireless does not work. Shows connected to the router, but nothing happens, but say unable to connect to the server, error trying to access the internet or by mail. Also turn continuous flashing VPN gray to green, then again, but we have never set up a virtual private network. Don't know if it is connected. Have you tried

    1 disconnection / reconnection to 2 routers that work very well for other devices

    2 reset wireless via settings > general > reset > reset network settings and then hang up again

    3 airplane mode on, wait a few minutes, then shut off again

    Overall, the router will connect to any time, we put the password, but there is no transfer of data. 3 other devices work fine with the router. Don't know where to go from here, or if it is possible to back out from the upgrade. Anyone else having this problem? A research increase the same problem.

    Thank you

    Anything that causes the problem is not specifically 9.3.4, which fixes just a security breach. Have you tried to restart routers?

Maybe you are looking for