The Satellite A100 bios update does not work properly

Similar Questions

• Power of the Satellite P100-240 unit does not work properly

  From time to time my power (PA2521E - 2AC3) unit starts beeping and stops the power get to the computer, forcing it to drain the battery.
  Summer happening for several weeks now and sometimes it stops itself, but other times I have to put my diet off for hours and keep checking to see if the beep stopped.
  It does not overheat as I only for about 30 minutes before it starts to beep.
  If I turn off feeding the continuous ringing for a few seconds before disappearing for good.

  What is - this and I should send it back?

  Hello

  I never heard that the AC adapter would do some sounds or would start beeping
  In my opinion it of not normal and the adapter must be verified.

  You should definitely contact the ASP (authorized service provider) in your country to control and perhaps this part needs to be replaced

  I think the warranty is valid at the moment and the replacement is done for free

  Good luck

• Satellite C660 BIOS update does not work

  I downloaded the bios-20120613151531 and extraected in a folder with the same name.
  But I don't see the list as indicated in the instructions, but I see only "BIOS_V200_WIN.exe".
  Double click that gives:
  Install UEFI WinFlash 0.02 - this program will be closed

  What should I do?

  > But I see only "BIOS_V200_WIN.exe".

  It is also a zipped package
  You should unzip the BIOS_V200_WIN.exe by right-clicking and choosing extract here.
  Now you should get the other files.

• Satellite L775 - mouse pad does not work properly

  I have a laptop Toshiba Satellite L775. I run Win 7 Home Premium. My mouse pad does not work properly. I also have a Logitech Anywhere MX wireless mouse. I tried the mouse pad to work properly with the key FN and F9, but it does not work. And you really have no idea if that turns or out of the mousepad anyway, subj for another time I guess.

  What does not work, but I have to do is to go to Control Panel then mouse option load that and just scroll the tabs without changing what each time and then close and the touch pad works. But only for this session. If I have my laptop nearby, or turn it off, I have to start throughout the whole process.

  What's past and how to fix this?

  Thank you very much.

  > What's past and how to fix this?
  After reading your ad, I still don t know what is your problem.
  > My mouse pad is not working properly
  How to understand this? What does not work properly? What happen exactly when you start your laptop?

• Satellite Pro M10 - infrared does not work properly

  Hello

  I have a Satellite Pro M10 and my infrared does not work. I downloaded the zip file with the drivers from this site. Then, I uninstalled and reinstalled, but it always happens in the Device Manager under "unknown - SMC IrCC - Fast Port infrared (IR Module: HP). (with an exclamation point). When I look at the properties it says under device status:

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Click Troubleshoot to start the troubleshooter for this device.

  However, under Driver Details is said:
  C:\windows\system32\DRIVERS\smcirda.sys

  I extracted the zip file in my home directory of c:\downloads\infrared.
  whatever I do, it does not now. It worked when I bought it, but I have too many things on the system for a new installation. Which brings me to another question. Is it possible to re - install windows without losing all your data, etc.? I did it with other systems (95,98) Windows. But it seems that the Toshiba recovery disc means any wiping.

  Thanks in advance for any help.
  Chris

  Hello

  If your HARD disk contains two partitions and you have saved the data on a second you can reinstall the operating system on the first partition using recovery DVDs.

• Satellite C850 - internal MIC does not work properly

  my knees thoshiba (C850 - B237) internal microphone does not work properly. I checked my record with webcam... but can hear the noise only... in the settings of the sound card, everything is ok... I also did the uninstall device driver and restarted... But the problem is still... Help, please

  You must mark the internal mic as the default device.
  This can be done in its tab → click right on internal mic to record and choose the default device

• Satellite A100: Recovery DVD does not work

  I want to restore my Toshiba Satellite A100 laptop to its original factory condition, but the DVD that comes with the package of recovery does not work...

  I have load to start computer press F12, and it starts on the DVD. It says "Loading RAMDISK Image", after which I am told by Toshiba customer service there should be options to clean up the hard drive or restore Windows XP.

  However, after VIRTUAL disk, I see a cursor on a black screen, and then the laptop off and restarts. After the connection, NO CHANGES made...

  What is the problem with that? How can I really use this recovery DVD?
  Someone help me please.

  Thank you.

  Hello

  The recovery procedure is not difficult.
  Just try to boot from the recovery CD or DVD and follow the Guide on the screen line.

  Your problem is very strange. You have created all the partitions on the HARD drive?
  I put really t know why your recovery CD doesn't work properly, but I think you should try to completely format the disk (also partitions), then try to boot from the recovery CD.

  Don't forget that the laptop is in the boot mode. (don t mix the standby or hibernation mode)

• Tecra M1: under XP Bios Update does not work!

  Hello

  When I try to update the bios on my tecra M1, it does not work and stops with a popup that displays the following message:

  Upgrading the Bios
  [Error] User is not authorized to update BIOS.

  I use windows xp family with administrator permissions

  hope someone could help me...

  Thank you very much!

  Hi again,

  Maybe you have to ease restrictions on the file bios. Or maybe you have to log in as administrator, that can be done by pressing F8 at startup, then choose the option "safe boot".
  Choose the 'administrator' account, and then try again.

  Some comments on your situation would be good.

  Welcome them

• The service "wuauserv" (automatic updates) does not work correctly

  The service 'wuauserv' uses constantly between 88 and 95% of my CPU, slowing down my computer to the point that it is almost unusable, so I've been suspending or disabling the process 'wuauserv' every time I use my computer.

  In addition, Windows Update does not, if "wuauserv" is suspended or not.
  It prevents just check the latest updates and never stops to do that no matter how long wait.

  Well, I managed to solve the problem.

  I followed the instructions on this page: http://workingscripts.blogspot.com/2008/05/windows-update-high-cpu-usage-fix.html

  Immediately after that, Windows Update and the automatic updates service finally started working again. It has been almost two weeks since I fixed it and have not had a problem since.

  I didn't format the hard drive and do a clean install of Windows XP for this problem - I have never done this because it does not seem necessary.

  And I do not see how this relatively recent automatic updates problem never touched my other problem Installation of Internet Explorer years discussed in my other thread.

• Satellite C70D-B-300 does not work properly

  Hello
  Since I bought my laptop Satellite C70D-B-300 I have a few problems:
  (1) I can't turn off the laptop, (the screen turn off but laptop still running), similarly I can't close the session
  (2) start menu windows apps and sometimes that I can't open (if I click nothing happen)
  (3) 3/4 times a day, the laptop get in crash, I can't do nothing, I need to shut down with the power button (press for 10 seconds) even with ctrl + alt + delete does not work
  (4) new problems with 10 windows, I can not open a shop, sometimes cortana and star menu does not work so I need to restart... but I guess windows problem not Toshiba

  Thanks in advance

  There are too many problems.
  In my opinion, you must reinstall the original recovery image feature and test the laptop with 'presets' again.

  What is an option for you?

• Satellite 1100 - CD player does not work properly

  Hello, I had problems with my cd player, it will not read anything under windows, but it will read my CD to restore DOS system and restores my whole system. I called someone at the helpdesk and he said to try and restore the system and see what that is and it did not even a difference, please help!

  Hello

  I think that your staff Helpdesk had run Win XP system restore to restore the operating system! If this does not work, you can try to reinstall the standard CD/DVD driver in the Device Manager!

  If this does not resolve the problem, according to me, that a full recovery of the system must be done! Then it will not work!

  Good bye

• Satellite L500D - integrated webcam does not work properly

  Hello world

  I have a L500D (I got it for about 2 months now) and yesterday I realized that my webcam did not work properly even if it worked just fine a couple of days.

  Here's the problem: when I turn it on (via Skype or through application of camera web toshiba), the colors are reversed: it's exactly like I had added an effect on the image as 'Posterize' or 'threshold '. Everything is bright, grainy, saturated...

  I tried in low light and high, and the night mode is not on.
  I couldn't solve the problem with the webcam settings, but regardless, I, can not do anywhere near a normal image.

  I spent a lot of time surfing the web but couldn't find a solution (or someone with a similar problem, in fact). I have windows 7 64 bit.

  Any help would be greatly appreciated. I run my laptop with a lot of care, which makes even more beat when something goes wrong... Thanks in advance!

  Jminiz

  Hi mate

  Didn t find such a problem described discussions, it seems that you are the first person who has reported this

  Have you tried to reinstall the webcam software?
  Try this.
  First remove the software of webcam and then after new reboot, install the new downloaded webcam software.

  PS; have you removed the thin sheet secure the lens of the webcam?
  Check it!

• Satellite L50D-B - TouchPad does not work properly

  My TouchPad is not working properly, it stops working after a few seconds after the start. Can someone help me?

  To be honest, it is not easy help these problems.
  What exactly happens? Touchpad is completely off? I want to say is there any kind of reaction?

  Have you tried to turn again using the F5 button?

• The BIOS update does not work on the Satellite - cannot load PHLASHNT.sys

  "Cannot load the PHLASHNT.sys driver.
  It gives then a few silly respons to check if you have admin rights or not.
  Under windows, very nice everyone has admin right here, that the problem with this :-/

  Hello Clemens,

  PHLASHNT. SYS is flash Phoenix NT driver that is necessary if you're updating a Phoenix BIOS. However, you don't tell what Satellite phone model you update or what version of the BIOS update you are using (Windows or traditional). Please send additional information so that we can try to help you with your problem.

  Kind regards

• Since the touchpad on a Satellite A100-812 Scrollfunction does not work

  The scrollfunction of the touchpad (A100-812) no longer works.
  Device should work perfectly said verification of the material.

  Please, try the following:

  Go to the driver download page
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Download the latest touchpad drivers, then uninstall the old (if possible, but it s is not necessary if you don t really know how), and then install the downloaded one.

  Should work again after reinstalling the driver.