The scale and the relationship between the problem of points

Similar Questions

• Problem of password of account, without that we can connect to the network on this computer. The error indicates, "the trust relationship between this device and the network is no longer valid.

  Hi, I hope you can help with this problem. A friend has 6 computers networked to a Tower Server and have a problem. A worker student put computers into hibernation, and since then, nobody can connect to the network on this computer. The error indicates, "the trust relationship between this device and the network is no longer valid. I tried to get into the pc to try removing network and replace it, but I can't get on the Administrators account because it has been disabled. I'm at a loss on how to proceed. My friend cannot afford a service call, so I'll try to help him.  Thank you

  If the computer is on a domain then there are at least two accounts that can be used to remove the computer from the domain:

  • A domain administrator account.
  • A local administrator account.

  When your friend has launched Windows for the first time after buying the machine, he was prompted to enter the name of an account. This account is created automatically with administrator privileges. He should use it now.

• I keep getting "the trust relationship between this workstation and the primary domain failed" error windows 2008R2

  Hi all

  I appreciate your help. And I hope that this issue has been addressed previously, although I couldn't find any solution there.

  I manage a domain windows 2008 with 3 domain controllers. Recently my workstations continue to fall out of the field. I get "the trust relationship between this workstation and the primary domain failed" to many workstations.

  I know how to fix properly, use netdom.exe. But the mistakes keep coming back. I don't know where to look for the source of this error. A possible problem might be the time in any field is out of sync. But all my workstations synchronize with the domain controller with the primary domain controller role and seems to work correctly.

  Are there other sources, that I need to check? This is getting frustrating.

  Thank you much for the help.

  Sincerely,

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• What is the relationship between the source code (LKS) file and the process file (L4P)?

  I know that Lookout produces a file of source code with an LKS extension when you save a file to process.  Can someone explain the relationship between the two files, especially while the (L4P) process is running?

  1. Is this just a backup file can be recompiled in a process file?
  2. A file corrupt LKS cause strange problems with operation process file?

  I currently have a very strange intermittent behavior with a process file run.  I first thought that the problem was associated with my Fieldpoint and/or their configuration modules.  Since then, I found that my process file has a file corrupt LKS.  I repaired and recompiled my LKS file to a new file to process.  I still don't know if I have solved the problem or not.  So, the problem is intermittent, I did that about 20-30 SECONDS to resolve the problems there before he goes.  Then he can not show up again for another 2-3 days.

  The .lks file is just the source code of your process. It can be opened by a different version of lookout, but does not have the .l4p file.

  The .lks file is not be used while a process is running. Lookout does not read the file more after his execution. So it should not affect the running process.

  What kind of problem, is it?

• How to fix Windows 7 32 Bit error: the trust relationship between the th workstation and primary domain failed

  How to fix Windows 7 32 Bit error: the trust relationship between the th workstation and primary domain failed

  Hi João,.

  To help solve the problem, remove the PC from the domain and then connect the computer to the domain.

  Click the Microsoft KB Article below for troubleshooting steps.

  The trust relationship between this workstation and the primary domain failed

  Let us know how it goes.

  Thank you

• Relationship between the list and ListField...

  Hey people of Java...

  I can't thank you enough for your answers because I'm really starting to "grok" the paradigm of Java.

  Another came today I'm having problems understanding I deconstruct this app MemoryDemo...

  In the screen of the demo is these two lines:

  Get and display the list of customers.
  _customerList = CustomerList.getInstance ();
  _customerListField = new MyListField (_customerList.getNumCustomerRecords ());

  Well, now I understand the first line perfectly. She develops an object with the contents of the customers it contains.

  The second line calls a custom ListField routine that I show below:

  the final private class MyListField extends ListField
  {
  public MyListField (int numEntries)
  {
  Super (numEntries);
  }

  }

  Here is the part that I don't understand:

  It seems to appeal to both the MyListField() and the super() is simply the NUMBER of elements required, but not * that * list to use.  Exactly how is MyListField() or super() knows how to use the list of customers?  I ask because this exact routine is used a few lines more later (in the part of the main screen) to do the same thing for a list of the records of the order - even once without any reference to which list to use.

  It doesn't seem to be an explicit connection or the relationship between the _customerList and ListField is building.  Is somehow deconstruct '_customerList.getNumCustomerRecords ()' to its root and use _customerList somehow?  I don't think that I changed the call to this:

  _customerListField = new MyListField (_customerList.getNumCustomerRecords ());
  _customerListField = new MyListField (PICK_A_NUMBER);

  Where the constant is: public private static final int PICK_A_NUMBER = 50;

  And he ALWAYS displays a list of customers (though now with only 50 files).  How to do know?

  Thanks in advance!

  -John

  "I guess that somewhere in the interior architecture of the ListField, he knows that he has to paint the whole - one at a time - when put on the screen - that's it."

  Fix.

  This is the great thing about ListField.  It attracts only those who are on the screen.  If you use ListField draw a list of 10,000 rows (I tested), and it will only extract and draw the 10 that he needs.

  "Again, I don't find any explicit loop where it is through each element and then calling drawListRow()."

  Good yet once, it is not there.

  "Maybe one day I'll be able to pay it back here."

  It would be great.

• I get an error, 'relationship between the workstation and the field has no confidence. "

  I have a 2003 domain controller, this a job gives me an error "trust in relationship between the workstation and the domain failed" so I read I have to reset the server, remove the object and remove the workstation from the domain, but my problem is that I can not even log in as administrator to do. My admin login details work perfect on other machines, but not this one. Help, please!

  On computers that are connected to a domain, you always have the choice to get authenticated by the controller of domain or the local computer. You must select the local computer, and then use a local administrator account.

• The relationship between workstation and domain fails approval

  In our environment, we have Windows Server 2008 with Windows 7 machines. Lately some Windows 7 machines have received the error that does not have a trust relationship between workstation and domain and users are unable to connect to the machine. We know a fix by removing the machine in the field and join again the machine. I am currently trying to find the cause of this problem, your help will be appreciated.

  Thank you for visiting the Microsoft answers community.

  The question you have posted is linked to a domain environment and Windows Server and would be best suited in MS TechNetWindows Server Forum orTechnet Windows 7 Security Forum. Please visit this link to find a community that will provide the support you want. Thank you!

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• relationship between the active layer and enable layer

  I use AE CC 12.2.1. I think that is not specific to the AE version but something general.

  When I read my layer by extendscript property, it shows layer.enabled = true and layer.active = false. If I change layer.enabled from false to true, the active property seems to follow the enabled property also.  I don't know the meaning of 'active', because even layer.active = false, there is no problem to manage the layer in AE.

  I would like to know something.

  1. How do the status layer.active to AE UI even I check it in the source of the script?

  2. What is the difference between layer.active = false and true?

  3. What is the relationship between the layer active and active layer?

  Thanks in advance.

  [Moved to After Effects - moderator script forum]

  In general, a layer is activated if the eyeball is on in the timeline panel. It is active if the layer is activated and that the model currently is between the points layer and output. You can control the active state. The active state is determined by the active state, in and out of the points and the current time.

  There are some exceptions (audio layers, other layers prone, etc.), but that's about all.

  Dan

• What are the relationships between the logging and IKM?

  What is the best method to use in the following scenario:
  I have about 20 tables with the large amount of data sources.
  I need to create interfaces that join the source tables in target tables.
  The tables are inserted every few seconds with about hundreds of thousands lines.
  There may be a gap of a few seconds between the insertion of different tables that could be attached.
  The source and target tables are on the same Oracle instance and schema.
  I want to understand the role of: 'Logging CDC' and "IKM - incremental" and
  How can I use it in my script?
  In general, what are the relationships between "Logging" and 'IKM '?
  Use both? Or maybe it's better deelte and insert the target tables?
  
  I want to understand what is the role of "Logging CDC"?
  Can 'IKM - incremental' work without "logging"?
  Must 'Logging' have PK on the tables?
  What should I do if I can't say PK (there may be several identical lines)?
  
  Yael thanks in advance

  user604062 wrote:
  Hello
  Thanks for your quick response!

  No probs - its still fresh in memory I did a major project on this topic last year (400 tables, millions of lines per day (inserts, updates, deletes), sup-5 minute latency). The problem is it isn't that well written on the web, that you have read the blog of the example I linked to in my first answer? See also here: http://odiexperts.com/changed-data-capture-cdc/

  Always on logging:
  My source table is inserted all the time.
  The interface to join the source table in the target table.

  In ODI, the correct term would be your source table "fits" in the table target, unless you mean literally that want to join the the source with the taget table table? My question if you want to do with the result of the join?

  What exactly the "journaling" CDC updates?
  It updates the model of ODI? interfaces? The source of data in the model of ODI? The target table?

  Logging CDC configures and deploys the data capture mechanism (Triggers or log based capture, IE Logminer/streams/Goldengate) - it is not updated the model as such, she pointed out the metadata of the model of ODI repositoty as a CDC data store, allowing you, the developer say ODI to use log data if you wish (reported in the interface) There is no change in the target table, you get an indicator of metadata (IND_UPD) against a line during the integration (in C$ and I have tables$) that tells you if its insertion (I) and update (U) or deletion (D). It had ' lines allow you to synchronize the deletions, but yoy say its inserts only then you probably used use this option. "
  So the only changes are the source table to your interface, another diary data (if you use logging) or the table of the actual source (if not using the logging).

  This is the main thing that I don't understand!

  I hope I made a little clearer.

  Try the following as a quick test:

  Reverse a source table an engineer and the target (at least) table.
  Import the update incremental LKM and IKM.
  Import of the JKM you want to use.

  Create an interface between the source and the target without any deployed JKM.
  Configure the options of JKM on the model, the "Start log" to start the process of capture - this is quite a complex stage and a lot of things to understand what is happening in the source database, better to check code ODI sends to the database and to review the documentation of Oracle database for a description of what his weight (instantiate Tables (, sets of creating change, creation of subscribers etc. establishment of newspaper groups, creating views Journalising etc.) -you will need to consult your Source DBA database initially as ODI wants to make many changes to the source DB (in mode Archivelog process max, parallelism, size, Java etc.)

  Now, edit your interface and mark the table source for use "Journalized data bank.
  Restart your interface
  Compare the difference in the generated code in the journal of the operator, see the differences of the operator.

  >

  Thank you, Yael

• Relationship between a Tablespace and the BLOB type columns

  Hello
  When I import using cmd imp, all tables were imported except the table that has columns of type BLOB. After some pain in my head, I noticed that it was because of tablespace (I don't have the source table space in my destination).
  
  Can someone explain the reason for the relationship between the tables BLOB and tablespaces (because all other imported tables)?
  
  Oracle Version: 10.2.0

  Check this thread
  problem importing table with the blob data type
  http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:::P11_QUESTION_ID:378418239571}

• Explain the relationship between libraries, albums and photos in pictures.  Where are the images stored?

  Looking for info on the relationship between libraries, albums and photos in the Photos app.  I can create several libraries containing photos and unique albums.  Can I put the same photo in libraries and the different albums?  By making a copy it creates a link to the original or a new photo?  Where are located the photo files?  When scanning photo to my Mac Pro files are placed in a folder structure, copy these photos in an album Photos using the original file or he places a copy in a database?

  Bottomline, I'm frustrated by the method of collection, the albums, the place and date.  I want store related photos in a separate album.   Example: A library for a family, containing albums of members of their family. Maybe the photos have duplicate in different albums.

  Some of your questions are answered by Leonie contributor in this thread:

  Re: Too many libraries...

  More answers can be found by using help in Photos app, or in general to help the Viewer.

  Apple Support website has links to information in articles; a search on the web is sometimes useful

  to locate the Apple pages faster than the company's site. Others in line include:

  Photos for OS X FAQ:

  http://www.IMore.com/photos-OS-x-FAQ

  How to use the Photos for OS x:

  http://www.IMore.com/how-use-photos-OS-x-ultimate-guide

  Good luck!

• Whenever I type the letter between f and h (he can't come in here or the problem occurs, so I will use 'p' instead), the locking of the keyboard and an informal search screen is displayed in the toolbar. Also happeninp in emails and 'my documents' but no

  I can't use a certain letter on my keyboard when in Firefox, email or my documents without the Freezin' screen and a pop up appears in my toolbar for a brousin site. The character I can not type is the letter between f and h in the alphabet. I have no problem with this letter in other applications, so I know that's not the keyboard. How to make and use this letter?

  This has happened

  Don't know how many times

  Is a week by o

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).
  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  If this does not work in safe mode and then disable all your extensions and then try to find out who is causing by allowing both the problem reappears.
  You can use 'Disable all add-ons' on the start safe mode window.
  You will need to close and restart Firefox after each change through "file > exit" (on Mac: "Firefox > Quit")

• What is the relationship between the library of Photos and the iPhoto library?

  I'm asking this question here because I can't find all the relevant information online.

  I was dealing with imac a client recently who had a full boot drive. I noticed that his old iPhoto library used 126GB while she had already made the transition to the Photos. His photo library said that he was using a lot more (200 + if I remember correctly). I copied the iPhoto on an external drive library and deleted. Then, I opened the contents of the package and imported pictures remains in program pictures to make sure that I wasn't actually remove all of his memories. Once the work is finished, I was surprised to see that there are more than 6 GB of free space on his computer. What gives? Is there a relationship between the old iPhoto library and new photo library? If so, what is it? Is what I did without danger? I understand at the time that she will not be able to return to iPhoto. But what I'm missing?

  Thanks in advance for your comments.

  No - they are totally separate - connection or relationship of any kind is not

  or the other can be deleted without any effect on the other - but it won't save much space at all and is not recommended - which is exactly what you have seen- Photos saves disk space to share images with your iPhoto or Aperture - Apple Support libraries

  LN

• Relationship between the samples through the second rate and sampling

  I was wondering if someone could clarify the relationship between the samples through second rate and sampling.

  I have USB6008 and USB6363 of the tips that I work with in Measurement Studio.

  For the nec USB6008 entry differential (up to four channels of HAVE), if I put a sampling frequency to 8192 samples per second, and I updated 2048 samples per channel with:

  Task.Timing.ConfigureSampleClock ("", 8192, SampleClockActiveEdge.Rising, SampleQuantityMode.ContinuousSamples, 2048)

  Am I right in assuming that:

  • through the 4 analog inputs 8192 samples will be collected every second
  • 2048 samples will be taken by way of analog input for each scan
  • The time between two successive data points is 1/2048 seconds (about 0.5 ms)

  Hi DKIMZEY,

  The help page for the "Timing.ConfigureSampleClock method" should have a hypertext link to the page "Sample clock" in NOR-DAQmx help, that contains this text: "this sample clock sets the interval of time between samples. Each tick of the clock starts the acquisition or the generation of one sample per channel. "When the sample clock frequency is 8192, then the time between two successive data for a single channel is 1/8192 seconds. The time between the data points on two adjacent channels is controlled by the clock to convert, which can be controlled independently on most devices (up to a point).

  Brad