The screen does not match the screen size

Similar Questions

• the sequence does not match my image size

  Hey,.

  I start the new project choose standard PAL video as below:

  Video settings

  Image size: 720: 576v (1,0940)

  Frame rate: 25.00 FPS

  Format of the pixels: D1/DV PAL (1.0940)

  Fields: Bottom field first

  Then I did in Photoshop framework of ornament size 720 x 576 and 300 DPI and the import of my project but I discovered the sequence window does not fit my frame. And I have no idea why, when sequence and framework of ornament are the same size.

  It looks like in below:

  

  Does anyone has an idea what I am doing wrong? In the past, I've already done similar things, and there is no problem at all.

  Peter

  The pixel formats are different. Your ornament PS is registered with you and square pixels video use 1.0940 paragraph use film to set the IRON to your ornament.

• my information does not match the screen. I have to scroll sideways and vertically for all to see

  my information does not match the screen.  I have to scroll sideways and vertically for all to see

  How can I change the size if it is adapted to the screen?

  Hi Marilyndunn,

  ·         are what application you referring?

  ·         It occurs on all applications?

  ·         If it works well before?

  ·         Did you do changes on the computer before the show?

  You can see the following article for more information about the display settings.

  Get the best display on your monitor

  http://Windows.Microsoft.com/en-us/Windows-Vista/getting-the-best-display-on-your-monitor

   

  Make the computer easier to see (optimize visual display)

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-the-computer-easier-to-see-optimize-visual-display

  Hope this information helps.

• Size of the hard drive does not match, what to do?

  End of 2012, the MacBook Pro 13 "

  I've added everything I installed and registered on my macbook and it does not match the size of my disk info...
  I just deleted all the documents that I need to see what will happen with the size of the disk and it says: drive for 'other' size is 85GB and

  Audio = 0
  Film = 0
  Photo = 0
  Programs = 0
  Security Copies = 0
  Other = 85,17 GB

  And the strange thing is that I have 10 + adobe programs installed (that doesn't add anywhere near 85 GB!)
  But the weird thing ', it is also that it shows 0GB to programs/software that I obviously have a lot of programs/software installed. WHAAAT...

  It's really annoying

  It seems as if increases the amount of data in 'other' counts for

  Is there someone out there in the world of the internet, who knows how to fix this?

  I tried to read a previous debate about this, but to be honest, I do not understand...
  I'm not exactly a macbook-computer-expert when it comes to knowledge like that

  I would be grateful for your help!

  

  It is in Danish, but... Yes

  LYD Sound/Audio =
  Film = film
  Photo = Photo
  Progr. = Programs
  Sik.Kopier = security Copies
  Agent = other

• total size of the files of Windows 7 does not match the size of partition

  In the D: partition

  total space: 265 GB free space: 59.1 GB

  There is only one visible folder: Daisy, size: 87.4 GB from the Explorer

  Other records hidden three: info Volume system, c:\Windows\Msdownld.tmp, $RECYCLE. BIN takes up almost no space

  Of course free space does not match the file size.

  Do not partition system, no problem to update windows and restoration, sleep or page file.

  Some strange things:

  1. with the help of file size 3.4 correctly see the size of the file

  Daisy file occupies 206GB

  Once I copied the whole file to the other partition Daisy

  and the result is the record more like 2xxGB

  so I guess that 206GB is the right size

  /////////////////////////////////

  may be ignored.

  2 folder being read-only Daisy

  Even uncheck or untick read only box in the properties of the folder does no effect

  After loading, it still shows read only

  3. 'read only' does not work

  2, daisy file is read only

  but I managed to delete files inside

  ////////////////////////////////

  ////////////////////////////////

  Is it a mistake to folder structure?

  It's a newly installed windows, so I guess that windows is clean

  Hope to see the solution and identify the problem

  Thank you very much

  OK, based on your new information, the error is that Daisy is 206 GB but Windows Explorer reports it as 87GB.

  No other information seems more relevant.

  Ideas-

  1 run ChkDsk on the drive - [first of all, make sure you have a backup of Daisy or make a new backup always] in Windows Explorer, right-click on the drive & select Properties, then the Tools tab, then click the check now button, turn off the option to make repairs in first to see if there are errors or not before making any decision as repairs can delete or corrupt files which are reported in the file allocation table.

  2. find another utility that measures the size of record to help you track down all the difference here.  TreeSize Free will be repeated.

  I do not understand your comment "later, I found the reason why I can't locate the"office"is the language of auto change." It's in Chinese at first but watch the 'bureau' cmd"that this had not been mentioned before.

  Denis

• paper detected does not match the paper size

  After clearing a paper jam when I go to print the 7310 all in one, beeps and has "paper detected does not match size of paper or type". When I hit OK the printed page is slightly bias. How can I fix it?

  First thing I want you to try is cleaning the rollers.  You said that the printed pages were asymmetrical.  Which can be the cause of the printer read the incorrect paper size and give this message.  The document below the link should help you clear up the problem of tilt.  Let me know what happens.

  http://support.HP.com/us-en/document/c00242765

• Cannot play bigfish games - your video card setting does not match the minimum system requirements: at least 2048 x 2048 DXT1 & dxt Texture size

  Original title: I have a computer toshiba M30 laptop and I'm on windows7. problem is that I can't play at bigfish games?

  HI the error I get is: your video card setting does not match the system minimum requirements:

  The size of the texture at least 2048 x 2048 DXT1 & dxt5 Texture formats support of the target.

  Thank you Joe

  Hey Joe,

  Thanks for the post.

  We need a few more details to help games play question, please answer the following questions.

  1. is this problem limited to Bigfish?

  2 do you have any problem with other games?

  You will need to install a graphics controller (video card) which can meet these minimum requirements.

  You can go through the following link; who helps update the graphics card, this could solve the problem.

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  You can also download and install the latest display driver by downloading from the website of the manufacturer of the computer.

  http://support.Toshiba.com/drivers

  I hope this helps.

• Try to disconnect from the iCloud on my Macbook Air (El Capitan 10.11.2) but in system preferences, it says I have to create a new password for my Admin account - and then the new password I get says "password does not match"?

  I am trying to add my outlook email account to the Mail app, but because it's the same email for my iCloud, for some reason, they are linked, and I discovered that I need to disconnect from iCloud, and then add the outlook account.

  But when I try to disconnect from the iCloud in system preferences > accounts on the internet, it says I have to create a separate password - but when I get one it says "passwords do not match"? I tried to do different and same, nothings working: S

  The dialog box is like this:

  [Stop using iCloud?]

  Create separate password for (name of the admin account)

  -You will no longer be able to log in or unlock your screen with your icloud password, and you will need to remember two passwords separately.

  iCloud password: __________

  New password: __________

  Check: _

  Index of password: __________

  [Use the separate password?]

  Not sure why that is, that the password does not when it's supposed to be the new s password?

  Also, I would like to know what to put in the box check?

  Help much appreciated!

  Thank you

  Oh wow. I just realized I was leaving the case confirm the void and the message "password does not match" mentioned. I just need to retype my password. Hilarious that I have not worked this one earlier.

• Content on the laptop does not match content on ipod

  Content on the laptop does not match content on ipod

  Content on the laptop does not match content on the ipod.

  How do you load the content on the iPod?  Manually (do drag and drop items on the iPod in iTunes), or automatically (set up screen settings of music from iPod in iTunes)?

  What content isn't is?  Unless your iTunes library is small enough to fit on the iPod completely, it is normal for the content on the laptop to not game content on the iPod.

• Toshiba satellite running Vista. The file is possibly corrupted. The file header checksum does not match the checksum calculated

  Toshiba satellite running Vista. The file is possibly corrupted. The file header checksum does not match the checksum calculated. Tried all posisible boots and no joy, continues to turn it back on! Frustration...

  Hey James,.

  I does no change, I didn't download a document from my email (from a sender of confidence). I tried to start in safe mode, just, it restarts and goes back to the corrupted checksum display... Last known good config was the same result! The only error message is one that is in the title of this post, not others. Another detail, that I forgot to add is that it does not get insofar as a logo windows before it fails, just the toshiba start screen, then either passes the corrupt message checksum or a blue screen and restarts before I can read the text on the blue screen. Thanks for your response! Any additional help would be excellent if you can. In the meantime, I'll try your methods. Thanks again
  OK, I have now managed a Startup Repair trying over and over again. Restore all settings and now looks very good, thanks for your help!

• Why microsoft used to support fsx insisting on a product code when all I have is the product key that has been authorized for bu activation does not match their input format

  trying to get a simple answer to my question, I asked the support of microsoft for the contact to ask someone who knows about flight simulator but I can't spend the screen requests I have enter product code - I walked into the box of the product id provided key interest which enabled but said stupid site simply enter the code in the indicated format and it does not match this format once again , I can't communicate with them-i suspect that it is a ploy because there is no available support and it's a time of great runaround.last they do not recognize my computer id code - this time, they have recognized my computer but then obscured code fsx - i don't believe that someone will read this-i has recently received a message to say that my thread on an unanswered question them earlier had been removed and I was wondering who decides that - always has to be someone in life at microsoft

  Hello

  Where have you bought Microsoft Flight Simulator X for?

  Follow the steps in this article.

  
  Solving the problems of activation for Microsoft games and mapping programs

  http://support.Microsoft.com/kb/960480

  Also see this article:
  
  How to get a new product key for Microsoft Games for Windows, Streets & Trips, or MapPoint
  http://support.Microsoft.com/kb/973457

  If the problem persists, Flight Simulator supports for assistance.
  http://www.Microsoft.com/products/games/FSInsider/tips/pages/default.aspx

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• The product key entered does not match any available window images, please enter a different product key

  Original title: complaint of Microsoft

  Dear team,

  Please note that we had bought a laptop Lenovo S 405 of Croma store located at Silver Bow Ludhiana.

  Type of machine:-IdeapadS405APGRTXA84555M4G5008EIN(20196) mode

  Machine Type No.:-59348194

  Serial number of the machine: -.

  Laptop provided with the integrated Windows 8 homepage unilingual, we tried to remove formatting the hard drive & then tried to install Windows 8 PRO that was purchased separately, but the system does not work, system displays a message error that says "the product key entered does not match any available window images, please enter a different product key

  Ask you please help to solve this problem

  Anticipating a quick answer on the same

  Thanking you,

  Yogesh clavreul,

  +

  Hi yogesh,

  This problem could be due to the fact that the product key provided does not match the press which is used to install Windows. The product key that is provided can be a file without assistance, in a. EI. CFG file, in the PID.txt file or in the BIOS firmware. Windows OEM 8 machines ship with the product key in the firmware, and if this product key does not match the press, then you will see the above error message.

  You are able to start after receiving the error message on the screen?

  I suggest you to change the product key to the correct for the media you are trying to install. If the system has a product key in the motherboard (o. a. 3.0 [Activation OEM] provides an OEM product key in the firmware), you use an Unattend file, file (EI.cfg) edition Configuration or the product ID file (PID.txt).

  You can check the link:

  «Windows 8 or Windows Server 2012 installation may fail with the error message: the product key entered does not match any of the images available for installation Windows.» "Enter a different product key"

  http://support.Microsoft.com/kb/2796988/en-us

  For reference, you can check the link and follow the steps proposed by Steven on 24 January 2013:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/the-product-key-entered-does-not-match-any-of-the/47e6f575-5792-404B-9b7f-2065bdb91011

  Please let us know if the problem still persists.

• author of the 881 failure application does not match the author token of debugging

  Hello

  I can't launch my app Android of Eclipse for the BlackBerry PlayBook.

  Error:

  Impossible to deploy the project MYPROJECT
  Info: Send request: install
  Info: Action: install
  Info: File size: 1076852
  Info: installation...
  Info: Treatment 1076852 bytes
  actual_dname:
  actual_id:
  actual_version:
  result::failure 881 the application author does not match the author token of debugging

  Thank you

  Delete the special character of the author fixed the issue.

• 500 the application author does not match the author token of debugging

  My name is Jean-François Geyelin. My application name is PewPew.

  When you try to run PewPew on a playbook, I get the error "500 the Application author does not match debug token author.":

  the command deploy blackberry - installApp-password abdelkader 192.168.1.37 - package device-Debug/PewPew.bar returns:

  Info: Send request: install
  Info: Action: install
  Info: File size: 3575023
  Info: installation...
  Info: Treatment 3575023 bytes
  actual_dname:
  actual_id:
  actual_version:
  result::failure 500 the Application author does not match debug author token.

  I did check the following:

  the blackberry-nativepackager - listManifest PewPew.bar command returns (among others):

  Package-author: Jean-Francois Geyelin

  Package-author-Id: gYAAgPqb4i9DBQ-DjR0zWsAWK8s

  blackberry nativepackager - listManifest library/Research\ In\ Motion control / debugtoken1.bar returns (among others):

  Package-author: Jean-Francois Geyelin
  Package-author-Id: gYAAgPqb4i9DBQ-DjR0zWsAWK8s

  What should I check or what is the problem?

  
  

  Problem solved by clearing and forwarding of the token of the device debugging.

• ORA-01504: name of the 'DEV1' database does not match parameter db_name "PROD1".

  Hi, all.
  
  This is my first time cloning of a database. Recovery finished, but gave me the following error message. All parameters in the pfile file are on 'DEV1 '. I think that the db_name "PROD1" parameter exists in the control file and causes this error. The control file is under ASM.
  
  How can I change the setting in the control file and raise the cloned database 'DEV1 '? Also, how can I avoid this problem next time I make a clone?
  
  Thanks in advance!
  
  
  Oracle 10g Release 2 under RHEL5
  
  Database cloning using RMAN Duplicate > ORA-01504: "DEV1" database name does not match "PROD1" db_name parameter
  

  ASMCMD> ls
  control01.ctl
  current.275.729098001

  archive log filename=/u001/dbsvr/dev1/1_131706_653848580.dbf recid=59 stamp=741953991
  media recovery complete, elapsed time: 00:09:31
  *Finished recover at 01-FEB-11*
  contents of Memory Script:
  {
     shutdown clone;
     startup clone nomount ;
  }
  executing Memory Script
  
  database dismounted
  Oracle instance shut down
  
  connected to auxiliary database (not started)
  Oracle instance started
  
  Total System Global Area     725614592 bytes
  
  Fixed Size                     2075592 bytes
  Variable Size                448791608 bytes
  Database Buffers             268435456 bytes
  Redo Buffers                   6311936 bytes
  sql statement: CREATE CONTROLFILE REUSE SET DATABASE "DEV1" RESETLOGS ARCHIVELOG
    MAXLOGFILES     50
    MAXLOGMEMBERS      5
    MAXDATAFILES      100
    MAXINSTANCES     1
    MAXLOGHISTORY     5445
   LOGFILE
    GROUP  1 '+DATA3/dev1/datafile/redo01.log' SIZE 100 M ,
    GROUP  2 '+DATA3/dev1/datafile/redo02.log' SIZE 100 M ,
    GROUP  3 '+DATA3/dev1/datafile/redo03.log' SIZE 100 M
   DATAFILE
    '+DATA3/dev1/datafile/system01.dbf'
   CHARACTER SET WE8ISO8859P1
  
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-03002: failure of Duplicate Db command at 02/01/2011 10:30:17
  RMAN-06136: ORACLE error from auxiliary database: ORA-01503: CREATE CONTROLFILE failed
  ORA-01504: database name 'DEV1' does not match parameter db_name 'PROD1'
  
  RMAN>
  RMAN> **end-of-file**
  
  RMAN>

  db_name parameter and database name must match. There is an incorrect db_name parameter in your target pfile database file!
  Best: there should not be any db_name parameter at all.

  Note: the name of the database is also in the controlfile.

  -----------
  Sybrand Bakker
  Senior Oracle DBA

• When I do exercise machine of the staircase, the k/cal burned into the machine does not match with the Apple Watch of the activity

  When I do exercise machine of the staircase, the k/cal burned into the machine does not match with the Apple Watch of the activity

  Example of

  Stair machine 550 K/CAL

  Apple Watch 30 k/cal

  Hello

  During a workout on the upstairs computer, record your activity using the app to drive on your watch, choose the stairs like the type of activity no. This allows your watch to use sensors and the data most appropriate to evaluate the results of your activity (including your heart rate, which is measured continuously during the training, when the training app using).

  More information: use of the application of the workout on your Apple Watch - Apple Support