The screen is dark on my laptop satellite

Similar Questions

• The screen backlight not working anymore on Satellite M

  Hello

  I have a problem with my laptop screen. The backlight of the screen does not work no matter how suspect more and I switch that turns off the screen when I close my laptop is broken.

  When I press the power button and release, a fast and light the backlight flash can be noticed.
  Does anyone have a solution for this so I can fix it myself?

  Thanks in advance, Stephan

  Hello

  I wouldn't recommend trying to fix it yourself if you n t have any experience with the laptop repair and do not be angry with me, but it seems that you don t have this experience
  In this case contact a technician and explain the problem

• The screen of my Sony Vaio laptop VPCS11FM completely lost its brightness after the installation of Windows 8. What should do?

  I installed upgrading W7 W8. Already during the final phase of installation, the screen of my Sony Vaio laptop VPCS11FM completely lost its brightness after the installation of Windows 8. I tried the settings of brightness through the hardware buttons and in energy savings, but it remained the same. What should do? Karl

  Looking for a display updated sony driver.   Its always a good idea to do so during the updating of the OSs.

• Re: Cannot complete the process of recovery on my laptop satellite

  I have a Toshiba Satellite running the home edition of Windows XP Home edition. A ran the CD recovery last night, having run before and had no problems. But this time... after it executes without error, he asks at the end to remove the CD and press a key to continue.

  What I did. The system then boot see the Toshiba home screen and then goes to a small cursor blinking in the upper left corner of the screen. Cannot cursor mover, the screen is black in the background.
  CTRL + ALT + DEL doesn't work.
  Press the power button the same scenario.
  A ran the CD recovery again, the same scenario as above.
  Then started from the Linux CD, shows my HD and content etc. A ran chkdsk since the Linux CD.
  No problems.

  The recovery CD is wrong?

  Satellite you need exactly?
  During the execution of recovery facility you have seen regular activity on the screen?

  I think the problem is Linux. Try to rewrite the MBR before you start the installation of recovery.

• Pavilion 15-ab269sa: is it possible to replace just the screen on computer pavilion 15 laptop?

  Her half of my screen has become fractured (not physically) and can be used. However, through the half of the screen is fine, I was able to use the laptop normally and it seems that no other part of the laptop is damaged. So I was wondering is there somewhere I can buy a new screen or if it can be replaced at all? Thanks for any help!

  Altogether. I do it all the time. Where do you live (country)?

  This is a LED 15.6 inch 1366 x 768 display and will cost about US $65 if you live in the United States (or Western Europe) and we can provide a manual or a video for instructions on replacing the screen.

  BrightView, HD, flat 809371-001

  Here's one to the United Kingdom:

  http://www.eBay.com/ITM/new-15-6-led-notebook-screen-WXGA-glossy-HD-Panel-for-HP-Compaq-SPS-809371-001-/231673956710?hash=item35f0d80966:gFMAAOxyB9RS1VuQ

• multicolored lines running through the screen of my computer Vista laptop window up and down

  multicolored lines on the screen of my laptop window Vista from the top to down manufacturing

  blurr photos and texts.
  seem as if a screen is placed on the desktop.

  This could be a hardware problem unfortunately (has no module or graphic display error).

  Is the problem if you start in safe mode?

  http://Windows.Microsoft.com/en-GB/Windows-Vista/start-your-computer-in-safe-mode

  There is a glimmer of hope that it could be a driver problem. If it's OK in safe mode, then it is to try a system restore to a well known date or try to update the graphics driver.

• Inspiron - left side of the screen is darker than the right

  I have a Dell Inspiron E1505, and it is difficult to distinguish the left side of the screen since it is significantly darker than the right side. I played with the birghtness parameters, but the effect remains even at the highest. Any help to fix this would be greatly appreciated. Thank you.

  Message edited by knickerbocker23 on 04/05/2008 19:19
  Message edited by knickerbocker23 on 04/05/2008 19:19
  
  

• the screen is separated by a bright contrast to the left and to the right of the screen is darker? Please help because it is very

  IM using a new 64-bit office built for the games, 1 half of the screen is brighter then the other side? Please any suggestings my nvidia card is updated?

  Wednesday, April 7, 2010, 02:13:29 + 0000, leolion37 wrote:

  > im using a 64-bit new Office built for the games, 1 half of the screen is brighter then the other side? Please any suggestings my nvidia card is updated?

  Sure I think it is a hardware problem with the monitor
  (or maybe video card) is not a problem with Windows.

  Borrow a monitor from a friend, try it and see if it does the problem
  Go away. If this is the case, replace the monitor.
  Ken Blake, Microsoft MVP (Windows desktop experience) since 2003
  Ken Blake

• Re: How to get the system running again on my laptop satellite

  Everything ok and ongoing run (Vista 32 bit), also installing the update for Intel chipset seemed to agree,
  but subsequently requested reboot does not work... and the horror began :(

  No matter if the hard drive is installed or not, following events occur after passing on: hhd light indicates activity, also for disk hard desinstallion (!), in the possible bios by F2, dvd lamp is lit and portable crashes.

  What has gone wrong? How can I get the system running again?

  TIA

  The whole story is a bit confusing for me. I put t know how you came the idea to update the driver chipset if everything was OK. Vista is old BONES and it is unclear to me that Toshiba has offered some updates of the chipset.

  What is confusing to me is the fact that you can not enter the BIOS settings.

  When you start your laptop you see Toshiba welcome screen and the grey line down with info press F2 to enter the establishment or F12...?

  What will happen after that? Display stays black or what?
  What happens when you press F2, F8 or F12? Everything works? Can enter you in menu start or advanced startup options?

  Try please start your laptop with the recovery DVD and press C repeatedly on startup laptop. Check if the installation of recovery will recognize.
  Post please a little detailed report.

• Message on the screen 'BD - J' drive Blu - Ray - Satellite-P50t-B - 10 K

  First, a comic book, first playing a message saying "the AACS key has expired. You will not be able to listen to some Blu - ray titles. You want to download from the internet now? "Click Yes, it is downloaded, update has been applied, reader closed and restarted."

  BD reinserted, saying "while he was playing a BD - J, mouse operation title and keyboard shortcuts are ineffective" message. Down in Google to find how I was destined to do work the reader saw that keyboard, mouse and touch screen had no effect. Read a few posts that say the arrow keys / directional are supposed to be used to fight against it, but they do nothing when I tried.

  Only things I can do with a BD disc in the drive is: opening and closing; maximize/normalize clicking via the touch screen anywhere on the drive; Right-click with limited function (display power switch and open Information from).
  I hate phone calls so don't really want to phone Support, someone at - it ideas what is happening and what I can do?

  What software did you use to play the disc comics and movies?

  If the error appeared using the TOSHIBA Blu - ray disc player, the solution is not very complicated.
  You need to update drive Blu - ray TOSHIBA by TOSHIBA Service Station.

  This doc may also be useful for you:
  http://support.Toshiba.com/support/v...tentId=3495688

  If you have received this error message by using the patch to update software of WinDVD V8 Blu - Ray player

  Details: http://aps2.toshiba-tro.de/kb0/TSB4503L90001R01.htm

  Greetings

• Re: a few questions about the recovery of product on my laptop Satellite L450D-113

  Hey there, fellow buyers of Toshiba.

  I have a few questions on prod. recovery on my laptop.

  * Is _First, safe? _ *
  Because my sister it on his Vista laptop (a Toshiba) and finished with a BSOD and a trip to the PC world for a replacement HARD drive.
  -----
  * _First, he will restore C: and D:, or just C:? _ *
  Inadvertently, I deleted the D: partition on my hard drive and he would like to return.
  -----
  * _Third, I am formatting due to incompatibility with some applications, namely 32 bit ones._*
  I can somehow incompatible lance 32-bit on my 64-bit?
  -----
  * _Finally, it erase Ubuntu as well? _ *
  I have Ubuntu (10.04 LTS incase you're wondering) and want to keep the data that it is intact.

  -----

  YES, I backed UP MY DATA (here, that goes with the words "I have no sti - oh, wait, what's that noise clicking / grinding?")? I just do not feel comfortable with the formatting yet until I know answers to these questions, but there again, I have only 200 MB left of C: (go, 250 GB in 8 months?) and need the return performance (GHIII and GTA: San Andreas used at 40 fps, but now play them is wading through treacle (LAG)!) Please respond quickly, and I look forward to answers!
  -----
  Toby

  Hello

  > First of all, is it safe?

  recovery process is completely safe.

  > Second, he will restore C: and D:, or just C:?

  He will restore the os with the settings on drive C;. Local d it will create image file from hard drive which I know.

  > Can I run 32-bit incompatible somehow on my 64-bit?

  It depends on the application. I mean, do a right-click on the application and choose properties where you can Compatible mode.

  > Finally, it clears so Ubuntu?

  If it is installed on local d: I guess that will erase. To be honest, is not sure

• Icons of the screen does not not on laptop

  I have a printer HP 5520 since December last and initially configured is a Dell Inspiron desktop pc wireless. I have regularly print and scan documents to your pc, without any problem.

  Recently, I have connected a Dell laptop to the printer, wireless again and had no problems printing. However, I have a problem of scanning. When I click the icon all get is a Notepad document. I tried software laoding the laptop using the supplied disc and also go online. It was also unsuccessful. I can still print without problem but still only get the document in Notepad - titled "HPSolutionPortal - notebook" or "HPSPProgress - notebook."

  I have some updated versions of Java and Adobe

  Hello

  Please follow the steps listed in this document and let us know if it solves the problem.

  Thank you

• Power of the screen saver turns on and the screen is dark.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  You did the changes on your computer until the problem started?

  Try the following steps:

  Step 1: disconnect any external devices and check if you can start the computer normally in safe mode.

  Step 2: If the computer works normally in safe mode, then perform a system restore to restore the computer to an earlier point in time before the problem started.

  Check out these links for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Step 3: If you are unable to boot to the desktop normally in SafeMode as well, and then try to run a restore of the system the system recovery optionsmenu.

  See this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers Feedback Forum and tell us what you think.

• After you enable SLI on the Satellite x 200 mode the screen goes black

  Hi all

  my name is Alessio and I encounter the following problem with my Satellite x 200-24e with Vista home 32-bit:

  Recently, I updated the operating system and yesterday I updated the VGA driver with the latest version available on the web site of Toshiba (display-20080904102618), everything worked fine but when I activated mode SLI the screen went black.

  I restarted the laptop and I tried to boot Vista on a regular basis, but I still got black screen.
  Then I started Vista in safe mode and reload the VGA drivers to set the SLI mode since the safe mode did not identify the model VGA.
  Can anyone help me solve this problem and get the SLI mode working again (I was able to set the SLI mode before update the VGA driver)?

  Thank you

  This wonderful s information.
  It of strange that the screen was dark after the SLI has been activated but it looks like it's working now.

  Thanks for your comments

• Replacing the screen on Satellite C50-A-1CK

  Hello

  The screen of my C50-A-1CK Satellite was recently broke and I need a replacement, but I have no experience with this sort of thing. Editing actually screen won't be a problem (I'm lucky enough to have friends who will fit it free) but I need to buy one and I'm not sure which one to buy.

  I'm looking for something around £40 or less if possible, and I'm in the United Kingdom, if a British salesman would be best. I would prefer to get one on eBay, if possible, so I would really appreciate if I could get a link rather than just "oh looking for it and you will find.

  I thank very you much in advance!

  To be honest, it is not easy to give you some good advice on this. Why? Replacing the screen is rather complicated and almost entire laptop must be disassembled. To do this you need manuals maintenance with explanation step by step how to do this and avoid any damage. This document is not a public document, so I do not know who want to help and how.

  If a person without experience and expertise want to do this, can damage your laptop even more. There are many smallholders plastic that can be broken or damaged.

  I don't know, but in my opinion, you should contact Toshiba service nearest and ask for help. It costs a little, but it will happen on the vocational track.

  Anyway, I don't live in the UK so I don't want to pick you up. You can check ebay UK and search for 15.6 HD 200 CSV LD and if you find a seller contact by phone and check compatibility with your laptop satellite.