the screen is often very hot.

Similar Questions

• IPhone 6 s - Phone was black screen after loading the next day and then the botton House had very hot as it burns! Cannot open my Iphone more.

  Hello. I tried to load my 6s IPhone last night and then when I woke up, the screen went black and I can not activate more. After some time, the home button gets very hot to a point that I can't touch him more. I tried to go online to find a solution and apparently, tons of users / owners have the same problem! Surprise, nothing to do a large part of this topic in the community online own Apple. This problem of search in google and it is like a burning question online just like the home button.

  Why?

  You can see this topic on another thread.

  Re: My iPhone 6 sec Home button is really hot and the unit does not light

  Didn't that happen since last year, and hundreds have already posted.

• Connector MagSafe 2 (the part that plugs into the computer) is getting very hot.

  Hello! I have a MacBook Air (Early 2015) and when I load it, the plug that plugs into the laptop is very hot (I can barely touch). This only happens when I use the computer while I am it loads. When MacBook is in mode 'sleep' the plug only heat. Is this normal or something in my MacBook is broken?

  Hello...

  Make sure it is well ventilated > use and maintenance your Apple MagSafe adapter - Apple Support

• When you click on a bookmark the screen quite often reduced to a vertical strip, covering about one third of the screen of my PC, and I would like to avoid this.

  I can't give more details because the question is obvious. Can I enlarge the screen reduces in the usual way, but it's annoying to have to do. The problem was spasmodic, but happens now (I think) every time.

  @ADG1

  This looks like a "mobile" version of a Web page.

  Firefox button orange (or tools) > > Options > content - enable JavaScript - press the Advanced button
  Deselect move or resize existing windows

  Then restart Firefox.

• After that my monitor was sleep, the screen will become very low.

  Sometimes, I have to reboot to get the full screen again.  Sometimes, I can just log off and then log in to get the full screen.  What causes this?

  Hi Betty1150,

  Thank you for your message.

  This is usually the result of the video card driver.

  A program that runs in the background can sometimes cause a conflict and the driver load correctly.

  Or the video card its self may have a little problem recovery sleep, or sleep.

  First, the easiest to try thing is to reinstall the video card driver.

  Here is an article on how to do it, I recommend that you check the section 'manually update drivers:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  If that doesn't do the trick, you can try to perform a boot, to see if a startup program is causing the problem:

  http://support.Microsoft.com/kb/929135

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have a very high quality image that I put on InDesign and it looks great on the screen and print very pixelated...

  I have a document that has a high ranking on quality image. When we print it's so pixelated. How can I fix?

  If it is not one of those ^ and you print directly from InDesign, go to print > graphics > Image > data send: > and choose 'all '.

  Or better yet, export as PDF and print from Acrobat.

• Satellite L555 - 10 M: blue screens in Windows, the system very hot, very noisy fan

  Hello

  Since yesterday my laptop shows a few Windows blue screens with the following values:
  (no value or empty)
  PAGE_FAULT_IN_NONPAGED_AREA
  PFN_LIST_CORRUPT.

  Some auto repairs were performed by start-Help/Systemstartreparation.

  After restarting the system in securitymodus and anti-virus disabled
  the following checks were made:

  (a) chkdsk c:
  The file system have been checked and no problem not found.

  (b) sfc/scannow
  Windows-Resourceprotection found no integrity issues.

  The system works only in time and
  After a few minutes, the laptop will be very hot and the fan works very hard
  the judgment of the work system,
  the mouse stop working,
  There is no activity on the disk system c
  the system shows reactions
  Finally appears with PFN_LIST_CORRUPT blue screen.

  Could you please help?
  Thank you.

  What did you do with your machine? do you have additional software installed or upgraded something?

• In Vista, cursor jumps around on the screen randomly

  For no reason at all my cursor will move to a different location on the screen.  Often after a letter or two.  Very fustrating.  Anyone know if this is a bug or if there is a solution?

  * original title - that someone using windows vista have problems with the cursor jumping to different enthusing or lines? *

  It's a laptop?  Make sure you that you are not accidentally hit the button of mouse cursor as you type.  Keep your wrists!

  Steve

• All users 12.9 inch screen iPad Pro noted that it seems difficult more hard/more to own footprints on the screen?

  I use a cloth towel style is aggresiive a little more than a Microfiber cloth, because the Microfiber cloth was not a good job at all, the cleaning of the finger prints/finger oils out of my big iPad screen and even the fabric, I use now takes some time washing and wiping my finger oils of the my big screen iPad Pro.

  Anyone else noticing this problem since the time of purchase?

  If so, what are you using for more quickly and efficiently clean the screen bigger?

  Now, I have had my iPad Pro for seven months, and screen cleaning problem is to start getting anjoying / irritating.

  I use the same type of towel fabric on my iPad 1, 2 and 3 and the screens clean quickly and easily my finger paintings. No problems.

  What gives with the new Pro iPad models and the hardest screen cleaning?

  Thank you all!

  I use my iPad 2 Air and iPad Pro both, every day. I can't find the screen Pro harder to clean than the Air 2. I use the same clothes on both Microfiber, with a little water. I'll put a few drops of water in the center of the screen when laid flat, work-around with the light finger tip pressure suit and then use the Microfiber, finish by wiping in strokes a path across the screen.  Works very well on both devices.

• Satellite A200 - 14 d: how many times can I change the screen resolution

  I would like to ask if often resolution change may damage the screen of my Satellite A200 - 14 d?

  Because now I'm programming in Assembly in resolution 640 x 480, and whenever I run a program, the screen should change its 1280 x 800 to 640 x 480 resolution, and it takes 1-2 seconds: it is empty, the backlight turns off, then the new resolution appears. I would like to ask if it permanently (often) could damage my LCD?

  Thank you.

  Don't worry man, it will not damage the screen ;)
  You can change the screen resolution often unhesitatingly ;)

• the system is running very slow

  slow cursor system, sometimes suspended, desappers of the screen, responding to very slow key board operation,

  Windows 7 is slow

  (1) unplug all devices such as printers, external hard drives, microphone, webcams etc.
  (2) make sure that your BIOS and drivers are up to date. Update of the BIOS can be risky, don't do that if nothing else works.
  (3) defragment your Windows 7 computer:
  http://Windows.about.com/od/maintainandfix/SS/SBSdefragWin7.htm

  (4) reduce the start up programs:
  (A) click Start, type MSCONFIG in the search box and press ENTER.
  OK the authorization of user account control and password if necessary
  (B) on the general tab, click Selective startup.
  (C) then change the tabs by clicking on the start tab
  (D) uncheck the programs that you do not want to start when your computer starts (do not turn off your antivirus).
  (E) click OK, and then restart the computer.

  (5) disable some visual effects in Windows 7
  There are many Visual effects that can be disabled safely to speed up windows 7.
  A. to do this right click on "Computer" and select 'Properties' in the right click menu.
  B. click on "Advanced system settings" in the left pane to open the"System Properties".»
  C. Select the "Advanced" tab from him. Then under 'Performance', click on 'settings '.
  D. now uncheck all the options that you do not want to use (some options disables Aero).
  E. restart the computer.

  (6) open the resolution of Performance problems
  A. open the Troubleshoot utility of performance by clicking on the button start.
  (B) in the search box, type "convenience store" and then click Troubleshooting.
  C. under system and security, click on search performance issues.

• Windows Vista the screen flicker

  flashing screen I have win vista my screen fickers and blacks out but you can see light emage in the back on the ground.  Who has collapsed but the screen is not very bright and sparkling is worse can you help me please

  Dave

  Thank you

  One thing you could try setting your monitor to the factory settings. This is done by the buttons on the screen, and it is different for each monitor, so I can't tell you exactly how do it, but it should be pretty easy. Most likely, it'll be press menu, press on + or - to navigate to reset/factory reset / all you can hear, then button selection, then select most likely again or +.
  I must say on the monitor menu, what to press.

• When I open my file have, the screen is totally black.

  The image is there, I can't see it.  When I hover over and click on, things change on the toolbars, because from there where I am on my document.  I can't see anything but a black background Uni.  Something to do with my screen resolution.  How can I fix it?  Somewhere, I managed to do work before, but can't make it work.  I use a book of Surface, and the screen resolution is very high.

  Zoom out as far as you can go and what do you see?

  Disable the preview (Ctrl + Y) and what happens?

• Have 2 websites that does not fill the screen

  My site of newspapers and websites foodnetwork now find Miss and in the middle of the screen... very hard to see. All the others are so far OK.

  Check your zoom controls. Hold the (Mac = Options) key, press; + (more) to enlarge - (less) reduce restore 0 (zero)

• X61s CPU is very hot

  Hello

  My X61s is 2 years old. I just clean up several months ago.

  No idea why the x61s cpu gets very hot? Should I apply new thermal paste?

  Thank you!

  Thanks for your suggestions!

  I cleaned the fan. It seems normal now