The security configuration

Similar Questions

• No menu item of the Security Configuration on the switch of the device for ExternalEmbeddedDevice

  Despite the use of NullAuthenticationProvider works as expected, I would try to sign a request (minimum profile) and deploy it in my RaspberryPi, but according to guide installation and Applications running on the Pi Board of raspberry , I'm stuck in the method #1, Point 8, since in the window selector device whenever I do a right-click on EmbeddedExternalDevice no article "Security Configuration... '. "is displayed in the context menu. Of these elements is frequently seen by the same operation on other devices (EmbeddedDeviceX and Qualcom_IoE_Device).

  Any idea?

  It seems a manual edit of _policy.txt is only an option for the RPi. The documentation is not in this part. EmbeddedDeviceX and Quacomm_IoT_Device are the emulators where all configuration files are on local and accessible file system since SDK.Netbeans.

• Why dose the dose of computer won't let me download because of security configuration?

  My computer won't DOWNLOAD t and he sends me an alert that it not allow me to download because of the security configuration and I don't know who to fix it.

  If you use IE to download its maybe something to do with its security settings.

  See this post - http://answers.microsoft.com/en-us/ie/forum/ie8-windows_7/your-current-security-settings-wont-allow-this/d1e8b468-9665-42e8-9165-43bf2c9a6f7b and if it matches your problem, see if the response is useful as well.

• ProDesk 600 G1 BIOS configuration of the TPM secure through the BIOS Configuration utility

  We have a range of devices, computers HP desktop and laptops in our environment.  Devices are all running Windows 7 64 bit and should have Bitlocker enabled, but we found that some were not encrypted.  So I am trying to set up a remote BIOS and Bitlocker config activate software that we can get out via SCCM and then embed in a task sequence image for new machines.

  I use the Bios HP Configuration utility to check a BIOS password is set and then activate the TPM chip.  I took a BIOS config output of each of our models and created a settings file that has all of the TPM associated parameters of all models.

  At the moment I run Setup BIOS utility manually for testing.  On all models I tried that works very well, except for the 600 ProDesk G1 SFF.

  When I run the utility on the ProDesk 600 G1 MFS, it says that I have managed to update the settings, and when I check the BIOS, the TPM secure has been unhidden and the TPM Management was given to the operating system (two settings I change), but the TPM itself remains hidden.

  It's the release of the BIOS configuration utility (it uses the 2.60.13.1 version, which uses plaintext passwords.  I also tried with the 3.0.13.1 later version that uses password files - same result)

  C:\ > BiosConfigUtility64.exe /cspwd: "password" set: "TPM_Config.REPSET"
  
  < BIOSCONFIG Version = "2.60.13.1" Computername = 'HP600G1' Date = "24/07/2014" Time = "13:01:37 ' UTC '1' = >"
  
  < SETTING changeStatus = "pass" name = "Embedded Security Device" reason = "' returnCode '0' = >"
  
          < OLDVALUE > <! [CDATA [hidden device]] > < / OLDVALUE >
  
          < NEWVALUE > <! [CDATA [device]] > < / NEWVALUE >
  
  < / SETTING >
  
  < SETTING changeStatus = "pass" name = "Enable security on the next boot" reason = "' returnCode '0' = >"
  
          < OLDVALUE > <! [CDATA [disable]] > < / OLDVALUE >
  
          < NEWVALUE > <! [CDATA [enable]] > < / NEWVALUE >
  
  < / SETTING >
  
  < SETTING changeStatus = "pass" name = "The BONES of on-board safety management" reason = "' returnCode '0' = >"
  
          < OLDVALUE > <! [CDATA [disable]] > < / OLDVALUE >
  
          < NEWVALUE > <! [CDATA [enable]] > < / NEWVALUE >
  
  < / SETTING >
  
  < SUCCESS msg = "Successfully set BIOS config." / >
  
  < information msg = 'BCU return the value' real '0' = translated = '0' / >
  
  < / BIOSCONFIG >
  
  C:\ >

  And after a reboot (where it should activate the TPM), BIOS shows as disabled built-in safety device (see attachment for the image).

  I have tried everything I can think of to get this to activate, including:

  • Different versions of the BIOS configuration utility
  
  
  • Remove the password from the BIOS and the application in the same order as the parameters
  
  
  • Different passwords
  
  
  • Reboot and allowing the machine to start completely to Windows before checking if the setting took effect

  I also tried to add the utility and the commands for an SCCM package and it works directly and as part of a sequence of tasks to see if that makes a difference, but nothing I've done has activated the TPM module.

  I know that the TPM module works, as you can turn it on manually and then Bitlocker can be applied to the machine, but with thousands of devices in our environment, I need to get this job without the need for manual intervention.

  Has anyone else had this problem and found a solution?  Or has someone at - he managed to activate the TPM on the SFF of 600 ProDesk G1 using the BIOS Setup utility?  Any ideas / suggestions would be very appreciated!

  P.S. This thread was moved from the company PC - Compaq, Elite, Pro for HP PC Client management. -Hp moderator of the Forum

  This problem has now been resolved by HP.
  
  They provided a replacement motherboard for the test machine I was using that solved this problem. I don't know what kind of motherboard failure could prevent the activation via the script TMP chip but not prevent activation through the BIOS menu, but as a replacement solved the problem, then it must be a hardware failure.

• How to remove McAfee security scran more my boot of the System Configuration.

  Hi, my laptop is a Windows vista 32-bit, I have a problem to remove McAfee Security scran more my boot of the System Configuration. In fact, I had used the removal tool to remove the antivirus McAfee sofeware eralier. But when I opened my startup Configuration recently, I noticed that the McAfee security plu scran is still there, I have turn off, but couldn't delete it. Help, please. Thank you.

  Gary

  Hello

  1. are you able to uninstall successful McAfee software?
  2. is there an error message or error code while you uninstall McAfee software?

  Try the following and see if it helps.

  Method 1:

  How to uninstall McAfee Security Scan Plus? : http://service.mcafee.com/FAQDocument.aspx?lc=1033&id=TS100783

  See also: http://promos.mcafee.com/LegacyLp/en-us/affiliates/adobe/landingpages/np681.asp

  Method 2:

  Uninstall if you have any program name McAfee Security Scan Plus on your computer.
  Uninstall or change a program: http://windows.microsoft.com/en-US/windows7/Uninstall-or-change-a-program

  See also:

  Solve problems with programs that cannot be installed or uninstalled:http://support.microsoft.com/mats/Program_Install_and_Uninstall

  Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  Method 3:

  The System Configuration utility displays the items that start with your computer. These items are usually in one of two areas. The registry or during startup.

  If you decide to prevent specific items from start until you can uncheck the in the System Configuration utility. Although this method is very good, it is ultimately preferable to delete them from the source. To access the common locations in the registry of these elements take a look in the following areas:

  Note : open the registry editor by clicking the Start button, type regedit into the search box, and then press ENTER. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run

  HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\RunOnce

  Hkey_current_user\\software\\microsoft\\windows\\currentversion\\run

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Runonce

  If you have disabled items in the System Configuration utility and want to remove the registry also they lies in one of the following locations:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SharedTools\MSConfig\startupfolder

  HKEY_LOCAL_MACHINE startupreg

  Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

• AnyConnect 4.1 - cannot get the secure gateway configuration

  So I AnyConnect working on one SAA however, ASA another located in another country, I get the following error:

  "Unable to get the secure gateway configuration.

  I get a prompt for the username and password seems to be authentication very well however in step 'check' the profile updates this error.

  I was comparing my two setups and they look identical.

  Working ASA model: 5512 worm 9.1 (4)

  Does not not ASA: 5510 worm 9.1 (4)

  Client version: 4.1.02011

  Any ideas?

  Thank you

  Hello, Kevin.

  I know, if there is no customer profile configured on ASA, the software Anyconnect client will use the client profile by default, which is placed on the local computer (C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile) when installing Anyconnect software.

• make an exception in jdev 11.1.2.3.0 after the application security configuration

  Hello
  
  Berfore my ADF Application security configuration works well. But after security configuration, I am getting the below error. Can someone help me to solve the issue. Here is the stack trace. BTW, the JDev I use is version 11.1.2.3.0.
  
  java.lang.NoClassDefFoundError: has not been initialized class com.bea.security.quark.ASIParserProxy
  at oracle.security.jps.az.internal.runtime.entitymanager.ExtensionsManagerImpl.init(ExtensionsManagerImpl.java:227)
  at oracle.security.jps.az.internal.runtime.policy.ApplicationPolicyImpl.initWithAppPolicyEntry(ApplicationPolicyImpl.java:322)
  at oracle.security.jps.az.internal.runtime.policy.ApplicationPolicyImpl.initAppPolicy(ApplicationPolicyImpl.java:274)
  at oracle.security.jps.az.internal.runtime.policy.ApplicationPolicyMap.get(ApplicationPolicyMap.java:110)
  at oracle.security.jps.az.internal.runtime.service.PDPServiceImpl.getApplicationPolicy(PDPServiceImpl.java:575)
  at oracle.security.jps.az.internal.runtime.service.PDPServiceImpl.getApplicationPolicy(PDPServiceImpl.java:556)
  at oracle.security.jps.internal.policystore.PolicyUtil.getGrantedAppRoles(PolicyUtil.java:2876)
  to oracle.security.jps.internal.jaas.JpsAbsSubjectResolver$ 5.run(JpsAbsSubjectResolver.java:497)
  to oracle.security.jps.internal.jaas.JpsAbsSubjectResolver$ 5.run(JpsAbsSubjectResolver.java:487)
  at java.security.AccessController.doPrivileged (Native Method)
  at oracle.security.jps.internal.jaas.JpsAbsSubjectResolver.getApplicationRoles(JpsAbsSubjectResolver.java:487)
  at oracle.security.jps.internal.jaas.JpsAbsSubjectResolver.createJpsSubject(JpsAbsSubjectResolver.java:334)
  at oracle.security.jps.internal.jaas.JpsAbsSubjectResolver.getAnonymousSubject(JpsAbsSubjectResolver.java:319)
  at oracle.security.jps.internal.jaas.JpsAbsSubjectResolver.resolveJpsSubject(JpsAbsSubjectResolver.java:258)
  at oracle.security.jps.internal.jaas.JpsAbsSubjectResolver.resolveSubject(JpsAbsSubjectResolver.java:214)
  at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
  at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3715)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3681)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
  Thank you / Vinet.

  Hello

  Finally the problem is resolved. Actual cause is, there is a space in the name of the folder in which the jdev is installed. I installed the jdev in a different directory (no spaces in the directory name) and has defined the variable env JDEV_USER_HOME and everything worked fine.

  It is an odd question. Sorry for the confusion.

  I thank all of you for your time.

  Best regards
  VINET.

• Problems with the permissions/security configuration XP Home Edition - can not download any software!

  I have Norton 360 on my computer.  OS is XP Home Edition. My computer very slow in normal mode (not in SafeMode if) I chatted for 4 hours with the help of Norton Tech... try to allow remote access, which could not happen because the piece of software that must be downloaded has been blocked, and I got a pop-up box saying that security settings do not need to download this software.  Then we tried to download Norton360 to reinstall it, and I got the same message.

  Since Explorer crashes constantly, and I'm very furstrated with it, I decided to try the same Firefox downloads.  Software download, but trying to run them, I got a message syaing that I don't have permission to run them.

  What should I do?  I'm NOT a computer guru - actually I'm computer disabled... Please help me.

  Hi IG18912,

  · Have you logged on as a computer administrator?

  · What is the version of Internet explorer, you have installed?

  1. follow the procedure that allows the file below to download in Internet Explorer.

  a. open Internet Explorer.

  b. click on tools, then options.

  c. click on the Security tab.

  d. Select the Internet Zone.

  e. click on the custom level button and then scroll down to download.

  f. be sure to enable the download of the file.

  g. click on apply and Ok

  h. restart Internet Explorer and see if that helps.

  2. in addition, follow the steps in the link below: error message when you try to open the the Task Manager on a Windows XP-based computer: "Task manager has been disabled by your administrator":http://support.microsoft.com/kb/913623

  3. on-line virus scanner and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below:http://onecare.live.com/site/en-us/default.htm

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I need to know how to configure the security settings for my laptop secured with a wireless router & domestic printer on a network in an apt building

  I live in an apartment bldg & want to know if my phone is secured with a wireless router & domestic implementation of a network. I have a laptop HP under Win 7 pro, a desktop computer using XP, & a wireless Canon printer? I use Microsoft Security Essentials for security. Can you tell me the right settings to ensure the safety of my business? And if I use the 'Public' library in documents others may see them outside my home network?

  Hi Tere,

  You can see this Microsoft article to strengthen the security of your computer and your network.

   

  Make your network more secure

  http://Windows.Microsoft.com/en-in/Windows7/making-your-network-more-secure

   

  Personal information and files on your wireless network can sometimes be seen by people to pick up the signal from your network. This can lead to identity theft and other acts of violence. A network security key or password can help protect your network against this type of unauthorized access wireless. Refer to this article for more information:

  Set up a security key for a wireless network

  http://Windows.Microsoft.com/en-in/Windows7/set-up-a-security-key-for-a-wireless-network

  Public folders are a convenient way to share files on your computer. You can share files in the public folders with other people using the same computer and with people using other computers on your network. Any file or folder you put in a folder Public is automatically shared with the people who have access to your public folders.

  Share files via public folders

  http://Windows.Microsoft.com/en-in/Windows7/share-files-using-the-public-folders

  Hope this information helps. If you need help with Windows, let us know and will be happy to help you.

• reset the security questions, don't remember the answers

  I need to reset the security issues don't remember answers

  You can reset them through your Email to recovery if you configure one: If you forgot your Apple ID - Apple Support security questions answered

  Otherwise, you will need to call Apple: Apple Contact for help in the Apple ID - Apple Support account security

• Re: Is it possible to create the current configuration of the software recovery disk?

  I recently bought A350. Next to the standard software provided by Toshiba, I bought and installed other products such as Norton Internet Security, update all drivers, etc..
  Is it possible to create a recovery disc on my current setup of the software?

  I know the recovery disk, but it will only restore the original configuration of the software. I don't want to go through all the pain of installing other products and update all the drivers.

  I have been using other software like Acronis Disk recovery, but I don't know this recovery cd created by these third party software can be used.

  Everyone has known about this?

  Hello!

  Boyfriend sorry but it is not possible to create a recovery disc with the current configuration of your software. The Toshiba Recovery disk contains the factory settings and t, you can integrate additional software to the image.

  If you want a picture of your laptop with your special software, you need to use another program like Acronis image. So you can make an image of your HARD drive with all your settings and software.

  Good bye

• Whenever I try to connect to the internet the wireless configuration tab is in the stopped position.

  To get on the wireless internet, I bought a netgear n300 adapt (wna3100). When I try to connect, I have to go through a list of procedures.

  Right click on my computer

  Double-click services and Applications.

  Double-click Services.

  Double-click Wireless Auto Configuration.

  Click Start.  (It is always in order.)

  Click the wireless network icon.

  Click the Advanced setting.

  Click the use windows to configure my wireless network settings box.

  Click ok.

  Once I did that I am able to connect to the internet.

  Hello

  You can read the article and check.

  "Internet Explorer cannot display the webpage" error in Internet Explorer

  http://support.Microsoft.com/kb/956196

  Note: Please note that reset the settings of Internet Explorer running resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.

• Error message: "the security certificate has expired or not valid" when signing into emails

  original title: it is message apear signin to my email (the security certificate is expired or not valid) my windos xp professional version - what can I do

  It is message apear signin to my email (the security certificate is expired or not valid) my windos xp professional version - what can I do

  Chances are that your system clock is bad - check your regional settings in the control panel and make sure that your region, time, date, and year are correctly configured.

• LAPN300 - the best configuration for 3 access points, while using the same SSID

  Hi all

  What is the best configuration for 3 x LAPN300 located in various places around my house of 3 floors, access points if I want just one SSID?

  I did some initial research which suggests that I can use the same SSID on all three, as long as they are on different channels. 1, 6 and 11 for example. In theory, then, as I wander around the House the client machine must auto swap to the AP with the signal stronger.

  What do you think? What is the best way or do, or could suggest you something else?

  As an aside... If I decided to create a second SSID for the guests at home, I would also want to add wireless isolation to this SSID. How would that be managing the DHCP server on the local network? How would be asked to connect to the SSID has never get an IP if they have been isolated from other clients on the local network?  Besides, how they see the router? The ANNUAL lets you specify exceptions to this isolation for this feature?  Alternatively, as I suspect, is the right isolation feature isolate them from other WLAN, not the LAN clients customers?

  I did some testing and configuration of the AP with the same SSID and security will do what you want. Don't worry about setting the channel because the auto channel setting works with these devices and automatically adjusts the spacing between the appropriate channels.

  Recommendation of the VPN_user is what you need if you want to isolate the SSID comments from the rest of your network clients.

  Isolation of SSID of the AP will guard only wireless devices to communicate with each other on the same SSID on which it is enabled.

• Impossible to turn off read-only - and I already checked the Security tab

  Hello, I use Vista Ultimate.  I'm on my home computer and have full administrative rights.  Have a big problem trying to get the recovery off the power on a personal folder read-only.  It is NOT a folder on a network or is a system folder.  When I go in the folder and click on the Security tab, ALL users have full right to make any changes.    No error displayed whenever I then deselect read only on the general tab, click on or .  But when I re - open the folder and check the properties, read-only is still active.  It's driving me crazy.  HELP!?!?!?!

  And Yes, I tried this:

  "To view or to remove the read-only or the attributes of system files in Windows Vista

  1. Click on start, run, type cmd and press ENTER...
  2. To view the syntax for the Attrib command, Type attrib------? at the command prompt.

  To remove the read-only attribute and to set the system attribute, use the following command:

  attrib - r + s drive:------------

  For example, to remove the read-only attribute and set the attribute to system for the C:\Test folder, use the following command:

  attrib - r + s c:\test

  Be aware that some programs may not operate correctly with folders for which the read-only attribute and the system attribute are granted. Therefore, use the following command to remove these attributes:

  attrib - r s by car:------------

  For example, to remove both the read-only and the attributes to system for the C:\Test folder, use the following command:

  attrib - r-s c:\test

  If the run command is not listed in the start menu, follow these steps:

  Click Start, click principally made programs, accessories, and then click Run."
  
  
  
  
  And get an error that says: parameter Incorrect Format.

  Have you checked to see if the files in the folder are effectively read-only or if the only problem is that the file is checked in read-only?

  You may need to go higher in the chain of record because some properties are inherited (see advanced security of the folder until you come to one where the special permissions list including all permissions that are inherited for administrators or your user account). It does not stick because you don't have the permissions and/or ownership to allow you to make the change.  You must have permissions to full right for all folders (both on the main page and in the special permissions list) and you will have to take possession of the records as well.  Then change the ownership and permissions for yourself and administrators and don't forget to check the box for all files and subdirectories.  This should give you what you need to make the changes.  Here is some information that might help.

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have:http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista:http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/. To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article:http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To solve this problem with folders, folders takeownership or the reader (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  Here is more information on the ownership of a file or a folder:http://www.vistax64.com/tutorials/67717-take-ownership-file.html. To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article:http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  I hope this helps.

  Good luck1

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.