The server does not support an SSL connection to a Hotmail account

Similar Questions

• I get an error "the server does not support an SSL connection" with a code of error 0x800CCC7D in Outlook express.

  I followed Bruce Hagen and still cannot send to the OE section. Reception is no problem. When I try to send I got the following error msg: "the server does not support an SSL connection. "Account: 'pop.att.yahoo.com', server: 'smtp.att.yahoo.com', Protocol: SMTP, server response: ' 250 8BITMIME ', Port: 25, secure (SSL): Yes, Server error: 250, error number: 0x800CCC7D. I tried to change the port for outgoing to 456. When I do so I get this error msg: failed to connect to the server. Account: 'pop.att.yahoo.com', server: 'smtp.att.yahoo.com', Protocol: SMTP, Port: 456, secure (SSL): Yes, Socket error: 10060, error number: 0x800CCC0E.  Is there a cure for this. He just started two days or at least that's when I noticed I cud not send. If you can help me I will appreciate it more. Thank you.

  JP banks

  Original title: cannot send using OE 6. Reception Ok.

  Hi JPBANKS,

   

  Thanks for keeping us posted and share this information with us.

  Glad to know that the problem is solved. Do not hesitate to contact Microsoft Windows Forums for issues related to Windows in the future.

• Windows live mail send error "the server does not support an SSL connection. Server error 250.

  Original title: Windows live mail error send

  Cannot send mail to Windows Live Mail.  Error message... The server does not support an SSL connection. Server error 250. Server - * address email is removed from the privacy *. Windows Live Mail error ID - 0x800CCC7D. SMTP Protocol.  Port 25.

  It's better, thank you. This message is not from the BT Server; It comes from your Avast antivirus which is intercepting your mail. You would be well advised to turn off the Avast Mail shield; It does not add any additional security if you don't by attention elsewhere, and can cause problems.

  I see that it is the record of mail in bulk that because of the problems in this case. Connect to the Web e-mail account and clear the items junk and deleted records.

  BT is recommended to use SSL, but your original question indicated that SSL was not taken in charge for SMTP on port 25. I think we'd better go on all your settings. Recommendations of BT are on this page: BT email: what are the settings for outgoing and incoming mail servers?, but they only work if you disable Avast scanning mail.

  Right-click on the account name in the folders pane, and then select Properties.

  • Under the servers tab, make sure that my server requires authentication is selected.
    Select connect with authentication in clear text.
  • On the Advanced tab, select this server requires a secure connection (SSL) for both servers.
    Make sure that the incoming (IMAP) port is 993 and port for outgoing (SMTP) is 465.

  When you've made all these changes, close Windows Live mail and wait five minutes for the program do its cleaning and save the modified settings. Then, restart the computer and make sure that the Mail of Avast shield is always off.

  Launch Windows Live Mail, then dial a new test message and send it to yourself. Post a new message in your response.

• See connection to the server does not see any source

  Hello

  I have a very big problem, my opinion-connection to the server does not see any computer desk-source. I had seen some sources but not all a few hours ago. At this point, I did not see the sources I so did many trys to see this source. Overall I don't have luck, and now I see no source.

  The problems started with a VM Windows Server 2003 EE SP2, I need training to be deployed with a view. I have not seen this virtual machine, either I chosse linked clones or not.

  The journal of the events of this virtual machine show, auto login TP Server service not started right.

  I hope to have some ideas that will help me to solve this problem.

  Greetings

  You can use a server OS in a pool of Terminal Server services.  If you want to set up a desktop computer, you will need to use a desktop supported OS.   You can find operating systems supported in the Administrator's guide, http://www.vmware.com/pdf/view31_manual.pdf.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• Server does not support remote façade panels

  Hello.  Hope someone has an idea about that.  After the computer host and update cDAQ 9139 LabView SP1 from 2013 to 2014 LabView dev suite shipped by NOR, I get the error "server does not support the remote panels" when you try to view my remote panel.  Before the update it worked normally.

  I went through everything in the list in this document, http://digital.ni.com/public.nsf/allkb/C23EF1551D8C52ED86256B140073EE2E and can't find anything that will solve the problem.

  I have rebuilt the application in 2014 of LabView (I even tried a new simple project with a single loop, one of the temperatures and a remote control), rebuilt the build spec and get the same error.

  "I've re-edited the web page and checked in the html code it refers"CODEBASE ="ftp://ftp.ni.com/support/labview/runtime/windows/2014/LVRTE2014min.exe" and I have, according to MAX, LabView DURATION 14.0.1 installed on the host machine.

  If something has changed related LabView 2014 which would cause a new firewall as this remote façade program worked great with 2013 installed?  I've already added that LabVIEW 2014 and all other related apps through the firewall, including the web server.  I am also on a machine that doesn't have a Bluecoat, our company network/internet security suite is installed.

  Thank you

  Michael

  Another possible solution to this problem - operator error.

  See one of my other posts here for details, but I made an assumption about the port numbers and what they apply to.  Two key points - the port of the web server application in the configuration of hardware web page is not the port used to access the remote panel - port is assigned in the properties of the device, the server settings remote control panel in the project.  And they cannot use the same port; This will also lead to the error "server does not support the remote panels.

  Note to the NOR - you must add this to your KB document on the resolution of this error.

  Thank you!

• The destination does not support the EFI firmware.

  Hello

  I have a Debian Linux 7.0 physics I'm P2V using converter 5.5.3.  When I choose my target ESXi server, I like:

  The destination does not support the EFI firmware.

  How confirm/deny, or enable the EFI on my node ESXi support?

  Hello

  This may be a false signal. The problem is that Debian is not a taken GOS supported for the converter. That's why he treats her like "Other Linux" and then the ESXi responds that it does not support the "other Linux" on EFI.

  Unfortunately I see no significant workaround solution. There is a crazy idea - converter checks if the source computer's BIOS or EFI by searching the directory/sys/firmware/efi/vars. If you can somehow it wrong that there is no (I don't know how), it might treat the source such as BIOS and convert it. When this happens, you should then change the VM of destination to EFI firmware and manually create the EFI boot entry somehow.

  Concerning

  Plamen

• Get this error "The Office does not support the requested protocol display."

  Just built a new environment of view 4.5 and became "The Office does not support the requested protocol display" when trying to use the client to connect through PCOIP, but works very well with RDP... What Miss me?

  Wwill price points righ away.

  When you installed the Agent of 4.5 view you ensure that PCoIP components have been selected?

  -Mike

• P2V then "an IDE controller is found, but the VM does not support the option.

  I am very new for ESX and ESXi. I am trying to convert the server running (really a Dell PC) to a virtual machine that runs on ESXi (we are in phase, about to move all real servers ESX or ESXi, if we love him test). After a conversion on the server, by using the agent option in VMware vCenter Coverter Standalone version 4.0.0 I get the following error when attempting to change the virtual machine to 'clean up' after the P2V conversion.

  An IDE controller is found, but the VM does not support the option

  ESXi is version 4.

  Any ideas? Google is of no help for the exact error.

  Try to use the latest converter, 4.0.1 instead.

• The destination does not support 64-bit clients

  My VMware server contains two Quad Core 64-bit processors.  I'm migrating a physical machine running Windows 2 k 3 64-bit to a virtual machine, but the migration/converter of VMware software responds with, ' < span class = "objects" > the destination does not support 64-bit clients.» Why doesn't it let me convert the machine?  Thanks for any help.

  You must enable VT in the advanced options of the BIOS of the HOST servers.  Once this is done, you must turn off the physical machine and power then turn it back on.

• Last night, I did a scan on my computer. He went only 3% when it froze with the server does not.

  Last night, I did a scan on my computer. He went only 3% when it froze with the server does not.

  Can you please explain the concept of what a server is and how can I ensure this does not happen.

  Thank you very much

  original title: Server

  Last night, I did a scan on my computer. He went only 3% when it froze with the server does not.

  Can you please explain the concept of what a server is and how can I ensure this does not happen.

  Thank you very much

  Launched a scan with which product (be specific, up to the exact version)?

  What version and architecture of Windows are you using?

• Card error"video or the driver does not support alpha separate mixture, glow will be disabled" when running COD4

  Original title: VGA

  When I run COD4 it says ' error during initialization: video card or the driver does not support alpha separate mixture, glow will be disabled.
  No idea why this is happening?

  There are maybe a few settings in the options/preferences menu of COD.  Your best way is to ask in a support forum for COD.

  In the future (or), before you buy a new game, visit Can You Run It to see if your hardware supports the minimum requirements of the game.

• MS-DOS 16-bit subsystem. The system does not support the mode full-screen.

  I when even run some dos applications, which allows to work ok under XP mode full-screen, but when you use Vista or Windows 7. I can only rum these applications in a window.
  The error message is

  MS-DOS 16-bit subsystem. The system does not support the mode full-screen.

  Please is anyway I could run in fullscreen... I don't want to use a virtual machine.

  Any advice would be greatly appreciated

  Of Ernest24

  http://www.dosbox.com/

  You might be interested in reading about DosBox.

  See you soon. Mick Murphy - Microsoft partner

• The system does not support the mode full screen for cmd

  Respected Sir/Madam

  I am user of Windows vista HOme basic... .also I have Windows 7 user... I'm basicllly, a student in computer engineering...

  I get an error "The system does not support the mode full screen" for cmd.exe in C++ turboo or JDK.. .then I getproblem by entering n compiled the program...

  my PC configuration is

  :-AMD 6000 + dual core Athlon 64 X processor

  Monitor:-Viewsoni

  RAM :-1Go

  Please give me a solution to problem 4 I wanted to run cmd mode full screen...

  your help will be appreciated by me highlly...

  thanking you

  Philippe

  Vista + do not support a command prompt full screen, as indicated by the message. You can manipulate the available to the command window to specify the width and height to be as big as you want, but this isn't quite the same thing...

• To install the server does not, after a Preparig to install the window hung for several minutes

  Hi, I tried to install memeo backup of a product for a moment, I recentley purchased. I know that the software and the product is not damaged, because I am able to install it on other computers. Its my fault see tho, I have the seagate FreeAgent GoFlex 1 TB external hard drive, and I had planned to use it on several computers. sort of, I installed it on my computer windows 7 without probs., but when I was installing on my windows vista computer, I accidentally unplugged the drive when installing memeo instant upward.  Needless to say, I knew this would be a problem. Windows popped up saying that the dashboard Seagate (which is the program that installs Memeo instant backup) have not installed properly, so I clicked on reinstall this program with the recommended settings, and I handed the drive and started the installation again. When I did, the registration page (for the unit I was using) pops up and froze, so I closed its process, then Setup of the Board of Directors of Seagate Dash appeared and I started to install, and when he rose to installation of the snapshot of Memeo back, it opens a "Preparing to install" window of a windows installer and after about 10-15 minutes , another windows installer window comes up saying ' to install the server does not.

  Ive done my time just trying to solve this problem and believe he made an incomplete registry file, it whenever it tries to install it tries to use the incomplete record. If one has found a solution to this, or knows what that means of ' installation server does not ", it would be very appreciated for your advice.    If you want to know my characteristics. they are {windows vista 32-bit home Basic, sp 2, 3 GB of ram, 2.10 ghz processor}

  Hello

  you are in the wrong forum

  It comes to the installation of vista operating system instance

  Why don't contact you the program manufacturer?

  Try the repair and recovery forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system?page=1&tab=all

• Windows Media Player cannot play the DVD. The disk has been created in a way that the player does not support

  Original title: error reading from a photo cd

  Error message "Windows Media Player cannot play the DVD. The disk has been created in a way that the player does not support"when the disc is inserted into the PC HP Touchsmart yet he plays on the laptop.  Help please

  Hello

  (1) what is the file format of the photos on the CD?

  (2) you are able to play another CD/DVD on this computer?

  (3) have you made recent changes to the computer before the show?

  (4) is it a Blu - ray disc?

   

  Install the codec for Blu - Ray. Your Blu - ray player should have come with a medium containing the codec. You can also use your favorite search engine and free research Blu - ray codec.
  The Blu - ray disc format is not supported in Windows Media Player. To play a Blu - ray disc, you must use a non-Microsoft program that supports Blu - ray playback and a device that can play Blu - ray discs.

  If you have a program that supports Blu - ray, then I suggest you to use the Troubleshoot utility and check for the issue.

  You can try the following methods and check if it helps.

  Method 1: Play a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows7/play-a-CD-or-DVD-in-Windows-Media-Player

   

  Method 2: Types supported by Windows Media Player files
  http://support.Microsoft.com/kb/316992

  NOTE - using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

   

  I hope this helps.