"The service user profile Service has no logon. User profile cannot be loaded. "and new users are not created in the registry, that is it please help
I am trying to create new users on my computer windows 8 but it dosent open, I get a message "the service user profile service has no logon. User profile cannot be loaded. "and new users are not created in the registry, that is it please help
Tags: Windows
Similar Questions
-
I can not connect and it says failed to connect to the profile.
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
cannot connect to my account
cannot connect to my account
You have another admin account , you can connect?
If so, please do it and then run the Microsoft Support tutorial below.If you don't have another admin account, go into safe mode.
Here's how to get safe mode:
Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and select Safe Mode with network.In the window to logon in safe mode.
1 can connect to your account administrator in safe mode?
If so, run the Microsoft Support tutorial below.2. If you can't log into your own account, you see another admin next to your account in the logon screen?
If you do, that one is the built-in Administrator account. By default, there is no password. Opening of session and run the tutorial from Microsoft Support below.Tutorial from Microsoft support :
http://support.Microsoft.com/kb/947215
There are several methods, go through one by one.
Method 3 has a "fix it for me" application
For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem. -
No new hardware or softfware added lately. No change to all programs. Error message says contract system administrator. That would be me and I have no idea what to do
Hello RogerAW,
Thank you for visiting the Microsoft answers community.
This problem can occur if the current user profile is damaged. To resolve this problem, create a new user profile.
Take a look at the article for more information: click here
Here you can find information about creating a user profile and copy your data from your old profile.
Hope this helps Chris.H
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Problems started after auto installed Vista Service Pack 2
https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1
Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010
Microsoft free support for Vista SP2 at the link above.
See you soon.
Mick Murphy - Microsoft partner
-
Original title: I can't connect to my admin account
Windows 7 - whenever I try to login on my admin acc it appears ("service user profile Service does not have the logon - user profile cannot be loaded") and do not know what that could have been and how to solve this problem, I have not tried anything yet if someone can please help me. I also connect to a standard ACC and cannot do anything because when he asks me my admin pass I put it in and nothing happens.Hello
This error can occur if the group policy setting "do not connect to users with temporary profiles" is configured.
Run the diagnostic tool for Fixit for the article mentioned below and if it solves the problem.
Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon.
Unable to load the user profile.
http://support.Microsoft.com/kb/947215Let me know if you need more assistance.
Kind regards
Afzal Taher-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Service user profile Service has no logon. (State continues to change on 32768)
I got the error "user profile Service service doesn't have the connection.", so I searched the Internet and found the microsoft registry editor guide, so I followed him but every time I put the 0 State, if I logout and log turn it on in safe mode it changes back to 32768? How can I stop it changing back?
Hello
These methods should help for Windows 7 or Vista.
References to Vista also apply to Windows 7.
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. THE ADMIN
Safe Mode account has no default password (so unless someone changed
the password should be available).Some programs such as the Google Updater (if you've added the Google toolbar,
Chrome or Google Earth) has been known to cause this problem.Error message when you log on to a Windows Vista-based or Windows 7
computer by using a temporary profile: "the user profile Service has no logon.Unable to load the user profile.
http://support.Microsoft.com/kb/947215Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "the user profile Service has no logon. Could not load user profile. "in Vista & Windows 7.
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have visited
logged on with a temporary profile. "in Vista & Windows 7.
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
----------------------------------------------------------------------------------------------------------
For Windows 7:
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.htmlUse the hidden administrator account to lower your user account APPLY / OK then
Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
If necessary after following the above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
your password even (or two with the same password) use a test or difficulty to another.You can run the command Admin account hidden from the command prompt
from there if necessary.How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html----------------------------------------------------------------------------------------------------------
For Vista:
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the hidden administrator account to lower your user account APPLY / OK then
Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
If necessary after following the above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
your password even (or two with the same password) use a test or difficulty to another.You can run the command Admin account hidden from the command prompt
from there if necessary.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxWhat are the system recovery options in Windows Vista?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-VistaHow to create a Vista - free methods recovery disk
http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html---------------------------------------------------------------------------------------------------------
If you can't access your old account you can still use an Admin to migrate to one
new (remember to always leave an account Admin who is not used except)
to test and difficulty).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Re: Satellite C660-242 - "the service user profile Service has no logon.
By turning on the laptop the following message when you try to enter the password
"The service user profile Service has no logon.
"Unable to load the user profile.Hello
Check http://support.microsoft.com/kb/947215 and post comments to the first Microsoft document on this issue.
-
Log the user in the section problems - the service user profile service has no logon
Hello
Every time I try and log on to the laptop computer, the following message is displayed.
"The service user profile Service has no logon.
Unable to load the user's profile.other profiles can be connected without any problems.
If you can help that would be great
See you soon
Check http://support.microsoft.com/kb/947215
Maybe this can help you. -
Error - "the user profile service has no logon.
Original title - login
When I try to log in. I get the message. The user profile service service has no logon. How can I fix it?
Hi DonPatton
1. what operating system is installed on the computer?
2. for how long have you been faced with this problem?
If you are using Windows Vista or 7 operating system installed on the computer, then you can refer to the link below and check if the steps provided assist solve you the problem-
http://support.Microsoft.com/kb/947215
I hope this helps.
-
The user profile service has not logon. User profile cannot be loaded.
This showed on my computor someday on my connection, and I am the administrator. So now I can not change anything on computor or backups or add programs or delete. I did nothing before that happened. Any help would be appreciated. I tried safe mode, but that did not solve the problem. I need a simple solution that I'm not terrible with computors. Thank you Sandy
Hello
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
-
Original title: can't log on...
When I try to connect my computer at home, I get an error message that reads... "The user profile service service has no logon. User profile cannot be loaded. Can someone tell what is happening and how to fix...
Hi, Thunderrad25,
Are you able to get into Safe Mode? Try a system restore. Select a date prior to the incident happening.
These can be useful as well-
A temporary profile is loaded after you connect to a Windows Vista-based system
http://support.Microsoft.com/kb/947242
The user profile Service has not logon. View user profile cannot be loaded.
-
Just after that Microsoft updates yesterday we received the following message: the user profile service has no logon. Profile of user was not found.
The user is locked. I tried the system restore, but the computer does not. I don't have a disk of Vista to re - install. Peux-I re - install online? I have the product key.
Thank you
Joe R.
See if the information in the above tutorial will help you.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx
Difficulty of a corrupted user profile
After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/kb/947242
A temporary profile is loaded after you connect to a Windows Vista-based system
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .
There is no Vista free download legal available.
Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.
Normally, they do this for a cost of $ small.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.
See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.
Normally, you have to press F10 or F11 at startup to start the recovery process...
Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Also ask them if it is possible to do the recovery disk/s since the Partition of recovery in case of hard drive failure or System Crash, when you are running correctly.
They will tell you how to do this.
Every computer manufacturer has their own way of making recovery disk/s.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.
If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
http://support.Microsoft.com/default.aspx/KB/918884
MS advice on the conduct of clean install.
http://www.theeldergeekvista.com/vista_clean_installation.htm
A tutorial on the use of a clean install
http://www.winsupersite.com/showcase/winvista_install_03.asp
Super Guide Windows Vista Installation
After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.
Save all data, because it will be lost during a clean installation.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/default.aspx/KB/326246
'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'
See you soon.
Mick Murphy - Microsoft partner
-
the user profile Service service has no logon failed to load the user profile
I received the following message when I try and log in my account to have:
The user profile Service service has no logon failed to load the user profile
What are my options?
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
"The service user profile Service has no logon. User profile cannot be loaded. »
When I try to log on to my site its tell me what; "The service user profile Service has no logon. User profile cannot be loaded. »
Hello cockateils8,
Thank you for visiting the website of Microsoft Windows Vista Community.
Try the rest of the stage in this article:
Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.
To resolve this issue, follow these steps:
- Delete the profile by using the computer properties dialog box. To do this, follow these steps:
- Click Start, right-click computer and then click Properties.
- Click on change settings.
- In the System Properties dialog box, click the Advanced tab.
- Under user profiles, click settings.
- In the user profiles dialog box, select the profile you want to delete, click on remove and then click OK.
- Click Start, type regedit in the start search box, and then press ENTER.
- Search for, and then expand the following registry subkey:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList - Right-click the SID that you want to delete and then click on remove.
- Log on to the computer and create a new profile.
Pasted from http://support.microsoft.com/kb/947215>
This should solve your problem.
Let us know if these steps solve your problem. I hope the information is useful.
Kind regards
Anthony
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. - Delete the profile by using the computer properties dialog box. To do this, follow these steps:
Maybe you are looking for
-
Preview thumbnails on the page empty new tab only for some URLS
When I open a new tab, there are three some preview thumbnails that are always empty, and there is no way I can make them appear again. They didn't work at first, but at some point the three extracts disappeared and never returned.I have already trie
-
My 6100 printer has never been able to print colors
1 day he told me that the Blue cartridge (cyan) is empty, even when I replaced the cartridge with a new one, and he always says that the other colors are 'weak '. I've been printing the words black and white on a page, in fast draft mode, but the onl
-
Age of Empires II Vista installation
Hi, I am trying to install the AoE II game on my laptop running Vista Home Premium. Successfully, the installation starts but freezes all the time at 51%, with no possibility to finish the process but the Manager tasks. I tried to run the installer a
-
programmatically change the ToolTips
I want to display a bunch of data in a small area, so I built a group with 2 x 7 vertical sliders. There is no visible labels and they are packed as tight as possible to save the estate. To read what represents one of the sliders I gave each of the s
-
Greetings and thanks in advance for any help. Here's my problem. I have a 60 d, and it has been a workhorse over the past year. I shoot product 4 times a week, with an average of 125 to 150 rounds per day. I've never had a problem. My camera is conne