"the settings saved on this computer for the network do not match the requirements of the network" intermittently

Windows 8 on ASUS laptop brand new.

TP Link WR841N router

When I first set up connection machine windows 8 wouldn't connect.  Repeated the network key is incorrect.  When I rebooted the router the connected computer.

However, after an interval of an indeterminate (but more than a few minutes) if I restart the computer it will not connect say the network settings do not match.

I can forget the network, re key, turn wireless market and stop etc etc.  Will not re connect.  If I reboot the router it connects right away.

If I disable wireless security the question goes too far.

What happens on a windows machine 8 and my laptop school girls which is windows 7

Android phones, imac, ipad, nintendo to connect without any problems.

All updates applied.

I read the other questions on that.  None of the allowed answers.  Basically it connects, then a few hours later if you restart the machine ITO is unable to reconnect.  The problem is with the security key.

Martin,

Try to install the latest firmware for the router then check. http://www.TP-link.com/en/products/details/?model=TL-WR841N#down

If the problem persists, please post your question in the forum of TP-link to check if they have a fix for this problem.

http://Forum.TP-link.com/forum.php

Please share it if you find on the forums of TP-link.

Tags: Windows

Similar Questions

  • 'the settings saved on this computer for the network do not match the requirements of the network.

    original title: securtity settings in my computers. where should I go and see what are my security settings?

    the settings saved on this computer for the network do not match the requirements of the network.

    where should I go and see the settings?

    Hello Arturito1,

    Thanks for posting in the Microsoft Answers forum! For assistance with your question, I would recommend that you follow the steps provided by Srinivas R in the thread below:

    http://social.answers.Microsoft.com/forums/en/vistanetworking/thread/a82432f2-9312-480A-b2ea-720033c73387

    Hope this helps J

    Adam
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • ' Error' the settings saved on this computer for the network do not match the requirements of the network "while trying to connect to the wireless network

    Title: Cannot get an Internet connection!

    Connection Wi - Fi comes with a warning that 'the settings saved on this computer for the network do not match the requirements of the network"what should I do to get a connection?

    Hello

    -Did you do changes on the computer before this problem?
     
    Method 1: I suggest you follow the steps to run the troubleshooter from the
    link and check if the problem persists.
    Using the troubleshooter from network in Windows 7
     
    Method 2: I also suggest you to follow the steps from the link and check if it helps.
    Windows wireless and wired network connection problems
     
    Method 3: Follow the steps below to remove and add the wireless network.
    (a) click Start and select Panel.
    (b) select network and sharing Center and manage the networks without wire (on the left).
    (c) in the list, click on your network and Remove top.
    (d) you can then search for available wireless networks again and reconnect it to your network.
     
    Hope this information helps.
  • The settings saved on this computer does not meet the requirements for the network

    My old laptop connects fine but my other not.  When I go to connect to the network, it says "the settings saved on this computer does not match the requirements for the network."

    Hello Tazdmx83,

    Thanks for posting on Microsoft answers Community Forums.

    This problem usually occurs on wireless network connections. I suggest that you turn off any wireless security feature by following the steps below.

    1. click on start and control access panel.

    2. double-click on network connections

    3. right click on the wireless adapter and select Properties.

    4. Select wireless networks, click the name of your wireless network and choose Properties.

    5. in network authentication, select open to disable wireless security.

    6. Please try to connect.

    If the problem persists, I suggest that you remove the connection and re-create the wireless network connections. The following Web site can help you on the creation of the wireless connection.

    http://windowshelp.Microsoft.com/Windows/en-us/help/297fa2dc-B20B-4327-B673-707a968c86801033.mspx

    Important note: Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

    If the problem persists, I suggest you reinstall the driver of card wireless network and Re-create the connection.

    Remove the driver for the card
    ========================

    1. click on start. In the start search box type "devmgmt.msc", and then press ENTER.
    2. expand "Network adapters", double-click the entry for the wireless network device.
    3. click on the "Driver" tab, click "Uninstall".
    4. click on start. In the start search box type "appwiz.cpl", and then press ENTER.
    5 remove the entries related to the wireless network adapter.

    Reinstall the driver with your CD of drivers on the manufacturer's Web site. After installation, create the connection.

    Also access the link and try to follow the steps in troubleshooting network related issues on Vista-based computer:

    http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

    It will be useful.

    Thank you and best regards,

    Srinivas

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think

  • "the settings saved on this network do not match the network requirement" is the message that I get when I try to connect to my wifi

    I changed my router to another wireless.  Since then, my laptop cannot connect to my wifi.  When I search my wireless network, it is exed out in red.  and the message "the settings saved on this network do not match the network requirement"... Please help

    [moved from comments]

    Hey Mike,

    -What version of Windows is installed on the computer?

    This problem usually occurs with wireless networks. I suggest you try the suggestions in http://answers.microsoft.com/en-us/windows/forum/windows_vista-networking/the-settings-saved-on-this-computer-does-not-match/a82432f2-9312-480a-b2ea-720033c73387

    Let us know if this can help, or if you have any questions.

  • My Mac has said that I don't have the necessary permissions, (although I repaired permissions and checked that I am an administrator of this computer) for the upgrade - what can you tell me what the problem is? Mac 10.5.8

    My Mac has said that I don't have the necessary permissions, (although I repaired permissions and checked that I am an administrator of this computer) for the upgrade - what can you tell me what the problem is? Mac 10.5.8

    This has happened

    Each time Firefox opened

    I tried to upgrade to version 2.0

    User Agent

    Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_5_8; en - us) AppleWebKit/533.16 (KHTML, like Gecko) Safari/533.16 Version/5.0

    See http://kb.mozillazine.org/Installing_Firefox#Mac_OS_X
    .....
    If you have Mac OS X 10.5 or newer then follow these steps:

    Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
    Trash the current demand for Firefox to do a clean reinstall.
    Install the new version you downloaded.
    Your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks and other personal data.

  • I need to reinstall my CS6 on my PC.  I installed it on this computer for 2 years now, but anyway half of subsequently moved to one of my hard drives and the other half is on the other.  I be sure to consider both drives off the coast and reinstall on the

    I need to reinstall my CS6 on my PC.  I installed it on this computer for 2 years now, but anyway half of subsequently moved to one of my hard drives and the other half is on the other.  I'm sure to remove both drives and reinstall on the larger hard drive?  I am a student and single MOM, and I can't afford the monthly subscription for the CC7.  If it does not somehow, I'll miss my classes.

    If the largest is the primary drive then it is safer than any other installation option, but all uninstall/reinstall can present problems.  If the software currently works very well, I would say that leave well enough alone if your future depends on software work.  Before you delete anything, remember to disable by opening an application and by choosing Help-> Deactivate.

  • If I install CC on one computer, then after having worked on this computer for awhile I install United Nations.  Is that what I can then reinstall CC on another computer under the same license? Thanks for your attention

    If I install CC on one computer, then after having worked on this computer for awhile I install United Nations.  Is that what I can then reinstall CC on another computer under the same license? Thanks for your attention

    You can activate the product on two computers, if are not the product on a computer before the uninstall, it is always better to disable the CC from this computer.

    To turn off

    launch no matter what CC products and click Help > log out.

  • My iPhone with iOS 9.2.1 5s is deleting random contacts.  This happened for several months is not just with the last update of iOS.  Any suggestions?

    My iPhone with iOS 9.2.1 5s is deleting random contacts.  This happened for several months is not just with the last update of iOS.  It deletes recently used contacts and removes also from my iPad.  Any suggestions?

    That you synchronize your contacts with? A decision-making application supported on the computer, a Cloud Computing service?

  • My computer is connected to the Windows 2008 R2 server and some of the users on this computer receive their network drive mapped on group policy and some do not.

    My computer is connected to the Windows 2008 R2 server and some of the users on this computer receive their network drive mapped on group policy and some do not.  I find nothing in Event Viewer that shows that there is a problem.  Please let me know what to do to get the disks appears

    Original title: Network Networking file sharing file sharing file sharing file sharing discovery sharing Fileshare share shared

    Hi,

    The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

    TechNet Forum

    http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

     

    Hope this information helps.

  • Why my ink on my printer and my computer ink level report do not match?

    Why my ink on my printer and my computer ink level report do not match?

    ink level?

    Hello

    You should check their documentation online with the help of the manufacturer of the printer, and
    drivers and ask in their forums (if any). The OEM printer manufacturer is responsible for
    the functioning of the printer and their supplied drivers and other software.

    It is not a Windows problem.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • How to install or reinstall the network driver. Cannot use this computer for downlosd it

    My computer to work together a new computer for me. It is impossible to update the drivers do for worksheet. It has taken the to do. You will need to update to install or reinstall the network drivers. How it's done. I can't use this computer to download, due to the fact that it a work computer.

    You must go to the website of manufacturers of network cards and download the proper drivers.

    I hope this helps.

  • Needs inventory of local network VIRTUAL the virtual computer for each network adapter

    Hello

    I'm looking for VLAN VM inventories for each network adapter, the script lists the following details at the exit of the CSV file.

    VMname |  Cluster name |  Name NIC-1 |  Name of VLAN. NIC name-2 |  Name of VLAN.


    Thanks in advance!

    Hello

    $(gkulikowski #08: 15:06 > get-vm | %{$clustername = ($_ | get-cluster) .name; $_ |}) Get-NetworkAdapter | Select @{N = "Name VM"; E={$_. Parent}},@{N='Cluster'; E={$ClusterName}},NetworkName,@{N='NetworkCard'; E={$_. Name}}}). Export-csv-path c:\out.csv

    but it will be output that

    Name of the computer Virtual Cluster NetworkName card
    -------                         -------                                      -----------                                  -----------

    So if you have more than 2 NICs for you will see them as well. not in the form of columns but as rows.

    OK, and if you want to have in the columns, I wrote like this:

    $(get-vm testgk | %{$clustername = ($_ | get-cluster) .name; $ntwkcards = $_______ |}) Get-NetworkAdapter; » » | Select @{N = "Name VM"; E = {$ntwkcards [0].} Parent}}, @{N = "Cluster"; E={$ClusterName}},@{N='NetworkCard 0'; E = {$ntwkcards [0].} VLAN Name}},@{N='NetworkCard 0'; E = {$ntwkcards [0].} NetworkName}},@{N='NetworkCard 1'; E = {$ntwkcards [1].} Name}},@{N='NetworkCard 1 vlan'; E = {$ntwkcards [1].} NetworkName}}}). Export-Csv c:\out-file.csv

    It will be the exact release you requested.

    'Virtual machine name', 'Cluster', 'Map' 0 '', 'Card 0 vlan' map 1 ","map 1 vlan.

    You mentioned the name of vlan, so I guess that you think of the name of portgroup.

    Greg

  • 8024A 000 - Windows Update code does not work and "installing Windows could not configure Windows to run on a hardware on this computer" for Vista64 reinstall

    I have a HP Pavilion Elite e9180t PC comes with Vista Home Premium 64-bit.  I had the hard drive (Seagate/Barracuda 7200, 750GB) SATA to go over me (after the expiration of the warranty of course) so I replaced it with a WD Caviar Green 1 TB drive.  When I rebooted the news of recovery disk to the new disk, VIsta worked but Windows Update does not work and I get A 8024, 000 error Code.  To worked with Microsoft to try to resolve that (never made), I am frustrated and all saved just reinstall Vista.  When I try to reinstall Vista, I now get the message "installing Windows could not configure Windows to run on a hardware on this computer."  The installation progresses up to the stage of upgrade (a final) then I get error and it puts everything back the way I started.

    The only thing I changed hardware wise is the hard drive, so this error message seems silly because Windows runs on this material.  I even double checked that Vista is always enabled.  Anyone out there have any ideas?

    I have a HP Pavilion Elite e9180t PC comes with Vista Home Premium 64-bit.  I had the hard drive (Seagate/Barracuda 7200, 750GB) SATA to go over me (after the expiration of the warranty of course) so I replaced it with a WD Caviar Green 1 TB drive.  When I rebooted the news of recovery disk to the new disk, VIsta worked but Windows Update does not work and I get A 8024, 000 error Code.  To worked with Microsoft to try to resolve that (never made), I am frustrated and all saved just reinstall Vista.  When I try to reinstall Vista, I now get the message "installing Windows could not configure Windows to run on a hardware on this computer."  The installation progresses up to the stage of upgrade (a final) then I get error and it puts everything back the way I started.

    The only thing I changed hardware wise is the hard drive, so this error message seems silly because Windows runs on this material.  I even double checked that Vista is always enabled.  Anyone out there have any ideas?

    Hey GMPete

    some posters have reported problems when replacing a drive hp etc. with a hp motherboard not provided player etc.

    I suggest tha contact you hp because it's their recovery process you use

    at the below link HP support forums

    http://h30434.www3.HP.com/

    link below is for direct hp support contact us

    http://welcome.HP.com/country/us/en/contact_us.html

    Walter, the time zone traveller

  • Why microsoft used to support fsx insisting on a product code when all I have is the product key that has been authorized for bu activation does not match their input format

    trying to get a simple answer to my question, I asked the support of microsoft for the contact to ask someone who knows about flight simulator but I can't spend the screen requests I have enter product code - I walked into the box of the product id provided key interest which enabled but said stupid site simply enter the code in the indicated format and it does not match this format once again , I can't communicate with them-i suspect that it is a ploy because there is no available support and it's a time of great runaround.last they do not recognize my computer id code - this time, they have recognized my computer but then obscured code fsx - i don't believe that someone will read this-i has recently received a message to say that my thread on an unanswered question them earlier had been removed and I was wondering who decides that - always has to be someone in life at microsoft

    Hello

    Where have you bought Microsoft Flight Simulator X for?

    Follow the steps in this article.


    Solving the problems of activation for Microsoft games and mapping programs

    http://support.Microsoft.com/kb/960480

    Also see this article:

    How to get a new product key for Microsoft Games for Windows, Streets & Trips, or MapPoint
    http://support.Microsoft.com/kb/973457

    If the problem persists, Flight Simulator supports for assistance.
    http://www.Microsoft.com/products/games/FSInsider/tips/pages/default.aspx

    Kind regards
    Afzal Taher
    Microsoft technical support engineer

Maybe you are looking for