The simultaneous use of a rollover captions and Flash button

Hello

I have a button that I created in Flash. When hovered over, the button changes to a different color. I would use this button simultaneously with the legend of reversal feature in Captivate, but it looks like I can get only one or the other to work, depending on who is stacked on top.

Someone has ideas of solution, in addition to create each button individually in Flash and adding the text in point State?

I use CP6.

Thank you!

Hello

Why use Flash just to create a rollover button? Captivate offer buttons image where you specify up to three images used for bearings. And with the touch of Captivate, you can activate the legend of suspicion provide transfer you're looking for.

See you soon... Rick

Useful and practical links

Captivate wish form/Bug report form

Certified Adobe Captivate training

SorcerStone blog

Captivate eBooks

Tags: Adobe Captivate

Similar Questions

  • I use Firefox 16.0.2 and Flash 11.5 502 continues to crash, what can I do offer the problem?

    I use Firefox 16.0.2 and Flash 11.5 502 plugin keeps crashing. I switch to Chrome or IE and have no problem. If I uninstall Flash plugin Firefox works fine - any suggestions as to what I can do? It happened for about two weeks and I keep waiting for an update of Firefox, assuming you know the problem. I run AVG Free anti-malware, firewall, Zone Alarm and Trusteer report.

    For more information and other suggestions, see this article:
    http://KB.mozillazine.org/Flash#Flash_Protected_Mode_issues_on_Windows_Vista_and_above

  • I need manage the bandwidth used, PowerConnect 6224 traffic collision and packet traffic.

    I need manage the bandwidth used, PowerConnect 6224 traffic collision and packet traffic. I downloaded the MIB from the Dell support site and I saw thar there are about 105 MIB in the downloaded file. My question is: in what Mib, I can find the OID which allow me to monitor the above?

    Thanks in advance

    Rogerio

    Unfortunately, there is not a complete list of the different OID in different MIB. In order to find this info to simply browse through the different MIB seeking the OID, you need. We did some looking through the MIB and found these OIDs that can help you. Another thing to keep in mind is that the MIB downloaded are in general of a group of switches. So there are situations where a /OID MIB listed will work for a certain model of switch with certain level of firmware.

    RMON-MIB

    FastPath-cos-qos-mib

    Another method, some people have had success, done using a SNMP walk.

    http://www.snmpsoft.com/freetools/snmpwalk.html

    I hope this information helps. The method of importation for these MIBs can change based on the management/tracking software that you use.

    Thank you

  • Flash and Flash button text options have dissappeared

    Flash and Flash button text options have dissappeared in the Insert menu in Dreamweaver CS4. They used to be there, but not now

    Right.  Text Flash and Flash buttons were always a bad approach.  Adobe got smart and them removed DW CS4.

    Using CSS and HTML.

    Nancy O.
    ALT-Web Design & Publishing
    Web | Graphics | Print | Media specialists
    www.Alt-Web.com/
    www.Twitter.com/ALTWEB

  • Contradictory information on the simultaneous use of CC.

    I need to know if I download CC, I'll be able to install it on two computers and the programs RUN simultaneously. In other words - if I have 2 Mac at home, or a Mac and a PC, a computer running Flash and another is running Photoshop-can it be?

    Because according to this thread and the 'official' answer, its quite well:

    http://forums.Adobe.com/message/5385739

    But according to many other sites Web, the answer is,

    "If you buy 1 user license you can install the applications available in the creative cloud on your main computer and a backup computer, as long as they do not work at the same time."

    While one is?

    UrsusArctos12,

    Welcome to Adobe Community.

    For creative cloud end user license agreement was settled in a way so that you are able to use Cloud applications creative on two computers (any combination of MAC & Windows) at the same time as well. I hope that it would respond to the request you had.

    Kind regards

    Michael Sharma

  • To find the simultaneous use of program

    Hello

    I need to create a report retailer simultaneous program name, date last used creation date.

    I don't know I can know what program simultaneous last use.

    Input parameters are-
    (1) earlier,
    (2) period/aging buckets:-weekly, monthly, annually or just a "bucket" of the first parameter to Date above with Defalut "bucket".

    Help, please.

    Thank you
    Manisha

    Published by: Milind jawad on October 6, 2010 01:59

    Published by: Milind jawad on October 6, 2010 02:09

    As mpautom says, there are only a couple of tables or views to consider here. The following will give you the last time execution and date of each program contributing as well as at the end and the parameters used. It should be easy for you to add to the date of creation and all the settings you need.

    Kind regards
    Jon

    SELECT
    FCR.request_id req_id
    fcp.concurrent_program_name conc_prg
    pt.user_concurrent_program_name usr_conc_prg
    , TO_CHAR (fcr.actual_start_date, ' ' DD-MON-YY HH24:MI:SS) start_date
    , TO_CHAR (fcr.actual_completion_date, ' ' DD-MON-YY HH24:MI:SS) end_date
    flv1.meaning phase
    flv2.meaning State
    fcr.argument_text settings
    Of
    (SELECT
    concurrent_program_id
    max (actual_completion_date) as lastcompletedrun
    Of
    FND_CONCURRENT_REQUESTS
    WHERE 1 = 1
    AND phase_code = 'C '.
    Innerq GROUP BY concurrent_program_id)
    JOIN fnd_concurrent_requests fcr ON (fcr.concurrent_program_id = innerq.concurrent_program_id AND fcr.actual_completion_date = innerq.lastcompletedrun)
    JOIN fnd_concurrent_programs WE of the fcp (fcr.concurrent_program_id = fcp.concurrent_program_id AND fcr.program_application_id = fcp.application_id)
    JOIN fnd_concurrent_programs_tl pt ON (fcp.concurrent_program_id = pt.concurrent_program_id AND fcp.application_id = pt.application_id AND pt. LANGUAGE = 'EN')
    JOIN fnd_lookup_values flv1 ON (fcr.phase_code = flv1.lookup_code AND flv1.lookup_type = 'CP_PHASE_CODE' AND flv1. LANGUAGE = 'En' AND flv1.view_application_id = 0)
    JOIN fnd_lookup_values flv2 ON (fcr.status_code = flv2.lookup_code AND flv2.lookup_type = 'CP_STATUS_CODE' AND flv2. LANGUAGE = 'En' AND flv2.view_application_id = 0)
    WHERE 1 = 1
    ORDER BY pt.user_concurrent_program_name

  • The views using materialized for data warehousing and reporting

    Hello

    I would better understand the materialized views in Oracle in particular the use of the option: REFRESH QUICKLY ON COMMIT. The oracle database, we care is a PLM application and any of the tables to apply using the primary key constraints. Instead, the application uses a separate schema to store the key values for each object/save in the database. I would use Materialized View to the creation of a data warehouse smart to transfer only the lines that have updated since the last refresh of the warehouse. My understanding of the materialized views you can't define a until and unless you have a primary key constraint. It's fine and understandable.

    Can we have an oracle separate sid something like WSHD - data warehouse and using the database between the main site links - site WSHD always transfer lines that have changed since the last refresh with REFRESH QUICKLY ON COMMIT option? (Note: this is taking into account the fact that a database primary key constraints defined on the paintings of masters.)

    I guess you have to install MV NEWSPAPER tables on the main table and then create a materialized using option QUICKLY ON COMMIT REFRESH view?

    Am I wrong?

    Will there be another option for the transfer of the lines of main tables in the data warehouse in Oracle?

    Thank you very much.

    See you soon.
    Rohan

    Published by: José on 10/01/2009 00:21

    1. you can't define a materialized as ON COMMIT REFRESH in a separate database view. It must be in the database even if it's to refresh commit it.
    See http://hemantoracledba.blogspot.com/2008/06/mvs-with-refresh-on-commit-cannot-be.html

    2. you don't have to have a primary key to set a MV. You can set a MV WITH ROWID (except if you re-create the source table, you need to do a refresh of the MV because ROWID changes).
    See http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_6002.htm#i2063793

    Hemant K Collette

  • How to change the size of the image using HP ePrint app on and ipad or iphone

    I have a printer HP Photo Smart 7520. I have loaded down the HP ePrint app on my iPhone and iPad.  When you print a photo, how to change the six (4 X 6 or 5 X 7, for example) before printing on the iPad or the iPhone?

    Hi @thwhite1,

    Welcome to the Forums of HP's Support. I see that you want to know how to change the paper size in the HP ePrint app.

    I've included a screenshot of the HP ePrint app and where you will find the option to change the size of the paper.

    Please let me know how it goes.

  • The simultaneous use of the SD card in the BlackBerry device and the computer

    Hello

    Can any body tell me if the SD card in the BlackBerry device can be used simultaneously to the device and the computer and how how through programming or coding.

    No problem, can assign you this solved please.  Thank you.

    See the link for help to the top if you do not know how to do it.

  • Satellite A300 - 15 c - WLan hangs the simultaneous use of BT and WLan

    Hello

    I bought laptop Toshiba Satellite A300 - 15 c last month.
    I run Wifi and Bluetooth simultaneouly. Connect WiFi broke.
    Then I turn off Bluetooth and it worked perfectly.

    How do I change frequency Bluetooth or why it doesn't simultaneouly with Bluetooth?

    I have laptop of less than 10 metres from the Access Point with 8.5dBi outdoor antenna and the signal is not.
    Another Access Point is 20 meters from the antenna and it works at full speed.
    Why signal is not?

    I have Windows Vista Home Premium with the latest drivers.

    Ales Pospíchal

    Hello

    What do you mean by crash?

    > Other Access Point is 20 meters from the antenna and it works at full speed
    This means you can receive another point of access correctly WiFi signals using BT and the WLan together?
    If this is the case, then it might be a compatibility problem with your another WLan router.

    I m not very well what WLan card you have, but I recommend to update the driver WLan first and the BIOS if available.

  • Several problems that occur simultaneously; the affected objects are .swf, rollover image and formMail

    I am very close to finishing my site, but a few days ago, I ran into a few problems. Things that have been working perfectly, has stopped working. These are:

    -l' in the file flash heremouseover effect. As you can see, the file plays fine, but when I move the cursor, nothing happens. The file is suppused to scroll with the movement of the cursor. In addition, each image is a link, but when you click it, nothing happens. The same problem happened to the swf file used on other parts of the page, the links stoler, edge, oppbevaring and diverse.

    - The link image of tread on the right side of this page. It is the green square object with the word "bestill' crushed it. The link to the image worked, until the computr ogre killed my page. Now, nothing happens when you hover the cursor, and the link does not work. I tried to delete and create a new, but it does not help. (There is also another file flash on this page, does not work currently, but I think that this problem is not related to the one described in this post on the forum, so please ignore)

    -The form on this page. Yet it worked once, and send forms to my email. Now, it is not yet possible to write in the form.

    I tried to understand what I have done to cause these problems. The biggest change that I've done is move the contents of each page in a model, so that only the 'content' div class is editable. But then again, it might be something else causing the problems. I don't even know if they are related, even if the problems occurred (or discovered) at the same time.

    I hope someone is able to help me.

    Thank you

    Siri

    Too many problems for a post.

    That's why I looked at just one aspect, namely the Contact form. I hope that what follows will also grind the rest of the problems.

    Add/Edit the following

    . Happy {}

    float: none;

    }

    GRAMPS

  • The simultaneous use of wifi streaming and USB transfer

    Hello

    I want to write files to this disk from a PC connected via USB wireless, and wireless streaming at the same time drive another file to another device.  This usage scenario is possible in this product?

    Thank you

    No this is not possible with all products wireless of sandisk. They are not accessible through MSC and wireless at the same time.

  • The simultaneous use of two Apple Magic Trackpad 2

    Hello

    I just wanted to know, if it is possible to use simultaneously both Apple Magic Trackpad 2? I use Macbook Pro with the retina, early 2015.

    For those of you who are wondering why on earth I would use two touchpads at the same time, well, I am a PhD student who has the massive library of pdf documents (articles of journals, e-books, reports, Web pages, etc.) in my computer. I found myself hundreds of documents in pdf format every day looking for scrolling. It is such a pleasure to use the trackpad for this purpose because it is very accurate and it seems natural. I stopped using any kind of mouse for the year last due to carpal syndrome.

    I do not use trackpad on the Macbook in construction because it makes my hand to bend into an uncomfortable position and it is very uncomfortable. Besides, I also use the base of laptop and my Macbook screen is positioned at the same level as my eyes.

    I wish I had a second trackpad because I usually use both hands to scroll through documents, and I don't want to move the trackpad because I become entitled to Apple keyboard in the middle. Thus, a trackpad for each hand. It's all about the ergonomics of the workspace.

    From now on, I already have a trackpad that is connected to my Mac. And that will be the second if connected trackpad, also has its own battery status in the system preferences of the trackpad?

    You will almost certainly find that they will not interfere with each other.

  • Skype in point 8.1 of Windows - how can I return to the classic use as in Windows XP and Windows 7

    Dear gentlemen/Madame,

    I searched and could not find a solution to my case.

    I bought a laptop with Windows 8 preinstalled with SKYPE preinstalled as well.

    This new pattern of Skype is very annoying. Please let know us if there is a way how can I go back to classic Skype use, as it was in Windows XP and Windows 7, where I had a shortcut to Skype on my desktop and clicking on the shortcut opens the Skype application directy in the dekstop.

    Please help, as trace this novelty when Skype in Windows 8 will open in a new feature is very comfortable and little pets.

    Please suggest and inform how to return to the previous classic mode of behavior for Skype.

    Thanking you in advance for your kind assistance.

    Konstantin

    You can do this by installing the version of classic desktop Skype.

    The currently most recent Skype 6.13.0.104 desktop version can be installed using the msi installer:

    http://download.Skype.com/MSI/SkypeSetup_6.13.0.104.msi

  • The simultaneous use of two input DVB - T & S - Video on Qosmio G30

    Is it possible, Qosmio player or media library, to have the G30 established to receive a signal from two the built in DVB - T tuner & an external source, such as Sky Digital, connected to the S-video input or Composite?

    The setting in the library seems to insist that you choose one or the other, which seems extremely restrictive.

    Also, if possible, then would it be possible to record one and watch the other?

    The other feature limit seems to be that, despite its hybrid TV tuner, media library allow only one tuner analog or digital set up again, which means that it cannot be used to record from one channel and watch another.

    Hello

    This is a very interesting question, but I guess that it is not possible to do this with the Microsoft MCE.
    Like you said you can use either the analog or digital configuration, but not both together. But of course, you can use standard connectors such as S-video to connect your cable or satellite for your PC Media Center box and then to watch and record TV programs.
    But I don't know if you can do all of m.

    Some Media Center PCs are equipped to handle multiple tuners.
    For example, if your PC Media Center comes with two TV tuners, you can record two programs while watching a third recorded program.

    You know the Microsoft MCE FAQ site?

    Have a look here:
    http://www.Microsoft.com/windowsxp/mediacenter/evaluation/FAQ.mspx

Maybe you are looking for

  • iPhone 5 sec Bluetooth does not connect

    My 5s Bluetooth iphone works fine one day, the next day it does not connect to my Boise, helmet or Fitbit.   My Bluetooth is on, I have it enabled or disabled and you have rebooted my phone.  I have updated to IOS 10.0.2. I was able to pair with my i

  • Problem Re-partitioning drive of Fusion after deleting Windows

    Hello So last night I decided I wanted to do a clean install of El Capitan on my computer. I have two partitions, one of El Capitan and a Windows. Stupidly I didn't read upward how to uninstall properly the Windows partition (using the BootCamp assis

  • Write on txt file

    Hello I have an internship and I have to perform an improvement of a labview program. Currently, I write my data on my text file but it keeps only the last value of array LUN to. I would therefore like to write data to a text file with each iteration

  • Password entry screen does not - Acer Aspire V5 - Windows 8

    I started my computer laptop and hit the password entry screen, but I can not connect.I'm on an Acer Aspire V5 - 571 running Windows 8The cursor is not in the password field.I place my cursor, but can't click on anything anyone, nor in the password f

  • LaserJet P1102: HP LaserJet P1102 - error "INSTALL BLACK CARTRIDGE"

    Tried to print a provision of the EAGLE Cadsoft program card on photographic paper, A6. The paper A6 was on top of the A4 papers, if the printer did not take the A6 paper. After that, the error "Install black cartridge" appeared. Tried to power off A