The site with the details of our House has a "Brochure to download" which, for our House doesn't lose virtually all of its text but is OK, once downloaded, or on Internet Exp?
The site is of Symonds and Sampson. You can click on the 'Download Brochure"which then displays the brochure in pdf format. In the case of our House, virtually all of the text is missing. However, it downloads to the computer properly and everything works fine in Internet Explorer.
There is a bug in the default built-in pdf viewer.
There is nothing wrong with your PDF file.
See the attached screenshot to see what I received when I opened
the link in my Firefox.
I use Firefox 26.0 on Windows 7.
When I opened the link that I saw that it was missing some texts.
I've also seen the notification of 26.0 Firefox:
This document PDF may not appear correctly.
I opened the PDF file in Google Chrome and loaded perfectly.
I will report this bug.
This bug will be fixed in a future version of Firefox.
Tags: Firefox
Similar Questions
-
I use firefox for windows 8.0 and it just started happening after I upgraded, it was fine to 7.X. I tried to disable all add-ons, but it's not helping.
See if you can restore or replace the missing favicons.
- Favicon bookmark changer: https://addons.mozilla.org/firefox/addon/bookmark-favicon-changer/
-
Go to the details page: solution more simple/best
Hello.
DW CS3, PHP & mySQL.
What would you recommend as the solution the most simple/better to have a link to the page of results to the details page?
I used CS3 built in SB for whole Page master detail. But, really, I don't like it. It messes up my full and re-written result page
my details page. Only, I copied the link to details page and delete the rest.I then downloaded appliqué, with much support from Felix of http://www.felixone.it/extensions/freeextdetailen.asp?IDProdotto=FX_PHPMissing I downloaded this extension. It works very well.
For a long time, maybe more than a year, someone helped me to make a link to the page of details without any extension. But now I don't remember how. I'm sure that we have no extension.
I would really appreciate your opinion and your support.
Thanx for as much.
Deon
It is very easy to do without extension.
- Create a link to the details page by clicking on the icon of the folder next to the link field in the property inspector.
- In the select a file dialog box, navigate to the detail page, and then click parameters next to the URL field.
- In the settings dialog box, type the name of the primary key in the name field.
- Click lightning icon to the right of the value field, and then select the primary key of the Recordset.
- Click OK to close the dialog boxes.
This creates a URL that looks like this:
">Go to details
When displayed in a browser, which produces a URL that looks like this: detail.php? product_id = 45.
On the details page, use the URL parameter for the primary key to select the correct record in the Recordset.
-
Hi, the technology is a bit beyond me so I need help please.
I have a picture of a written text, but I see that there is also something written on the other side. Is there a way to somehow reverse the picture so I can see what he says on the other side? Someone says something on a reverse and I don't quite know what they are on everything. Thanks in advance, Vince
Can you give more details? How can you see the side 'inverse' of this image? I don't think that you are talking about 3D in Photoshop? If you mean that you see the text "mirrored", you can use, modify, transform and back horizontally.
-
pay with paypal without going into the details in the form of Fund BC
We are trying to reduce barriers for our clients on the Fund.
Currently on our order page that the user would still have to fill in all their details, and then select "paypal" as their method of payment, then transfer them to paypal in order to fill the box, connect or fill in their details again, then return to our site.
I can see if someone has implemented a solution where a customer can jump directly on paypal if that's the method of payment that they would prefer to use without having to enter their details in the form of registration of order?
Is it still possible?
If I simply ignore the js form validation if their method of payment is paypal I am currently getting:
ERROR: An error has occurred. Your web form should capture customer name and email address. Fix this problem and reinsert your web form on your web page.
See you soon
Pat
Hey Pat,
I don't think it can be done in British Colombia. BC needs to know which order site
comes as a result of the IPN. If you disable javascript on the
registration form before you submit and then send the form, you will have
see that BC will take you to a blank page after the presentation. But if you
Look at the source of the blank page, you will see that there is a hidden form
on it, which gets presented by javascript. This is because who POST at
PayPal must come within the client browser or otherwise, how do you
Send a customer to PayPal with a post request.
But anyway, take a look at this form BC submits. If you can somehow get the
Command ID and some other stuff that BC sends to paypal, you may get it
work. He did years that I watched this. I don't know if BC will be
able to capture the NPI post, enter the details of PayPal sends in return and
Store them on the agenda. It's something that you need to test.
See you soon,.
M
The game, July 30, 2015 11:40, Patrick-W [email protected]>
-
We use websiteforge.com to host our Web site and we cannot use the right click to paste the content in our blog editor. They say it's a problem with Firefox. Can you help me? Thank you.
Try this extension:
- RightToClick: https://addons.mozilla.org/firefox/addon/righttoclick/
-
www.needlepointnow.com has a caution symbol triangle it's https address.
What are the steps to verify my site with firefox? Keep in mind I'm not SHE but a humble Designer. So step by step please.This must be resolved so that our readers feel secure renewing subscriptions.
Your site is currently using TLS 1.0, which is obsolete and unsafe. You must upgrade to TLS 1.2 or later
-
Hello, I am writing because I have a few problems with my favorite browser after update to 8.1 Windows. Here are some details. I've updated Windows 8.0 Windows 8.1, since Firefox run a bit oddly. In particular, when on sites with lots of images like Facebook. It's as if there is some sort of effect of Flikr between the office and the images, as well as between the images and the browser (a bit like old flikering of 16-bit video games). It's not too bad, but it's a question. I tried to reset firefox and restart the computer. I have not tried a repair, and I haven't done an uninstall.
Hello, disable hardware acceleration in firefox should a restart of the application is taken into account. have you tried that too?
Please also see if there is an available update your graphics drivers ...
-
I have updated and now when I try to log on to Web sites with fingerprint reader, I get "Firefox doesn't know how to open this address, because the Protocol (dpql) is not associated with any program."
What is the Digital Persona fingerprint scanner? If it's that they have abandoned, for more details, see https://support.mozilla.com/en-US/questions/799388
-
I recently started to get this message when I try to do exercises on the site Doulingo. The site loads up to the time when I hit enter to begin an exercise then I get the exact massage indicated above to the upper left of the Safari screen, same thing happens with Chrome. It only happens on this site and only when you ask for an exercise.
I tried all the usual suggestions: compensation historic site and the data, a complete reset of the iPad reboots, stops. So far, nothing works.
I use a mini iPad 1st Gen with iOS 9.2.1.
In my house I also got an iMac and iPad 4 and do not have this problem with these devices, it seems specific to iPad mini.
I have the Doulingo app and it works, but does not offer the same functionalty than the Web site.
Hi FrenchApples,
Thank you for using communities Support from Apple! I'm sorry to hear you're having such problems with Safari on your iPad. If you continue to have problems with this specific site, you can find the troubleshooting steps in the following article useful:
If Safari does not load a page or a page Web elements are missing - Apple Support
Concerning
-
Site to Site with the subnets overlap
Hi all
Search for comfirmation on what is / is not possible. In short, we have a requirement of site but our local LAN varies from conflict. I am aware of how this get up and running with the help of a pool of IP addresses that is a basic ASA/IOS device can NAT behind but I wonder if it is possible to NAT behind a single IP address. NAT is also in place for the general internet traffic, but I hope that the image attached best describes our scenario.
Any help / advice appreciated.
Kind regards
Martyn
Hello
You will need to do NAT on both ends to get the installation work.
With these types of configurations, I more often just a 24 natted network to 24 another network on both sites.
You can configure one of the sites use a PAT address towards the other end, but the other end must have protected by some sort of NAT static between the hosts unique or equal to 24 networks.
If you would happen to configure both sites with a PAT translation, you couldn't really initiate connections between the site because no real host on networks 192.168.1.0/24 would have their own specific NAT IP to connect to.
So in short
- Both sites need NAT network
- Use 1:1 NAT static is between host addresses or complete networks on both sites
- The two sites could start the connection to any host on the remote end every single host has its own IP NAT staticly assigned address
- Use of PAT for site and other NAT static 1:1 with the addresses of host or complete networks on the other site
- Site with unique PAT IP address can connect to all hosts of remote sites, since they have staticly NAT IP addresses assigned.
- Homepage is not able to connect to any host at his remote site that the remote site has only a PAT address facing their way.
If you had 2 ASAs with 8.2 or UNDER software your static NAT configurations could be e.g.
Basic information
- Site1: 192.168.1.0/24
- Site1 NAT: 10.10.1.0/24
- Site2: 192.168.1.0/24
- Site2 NAT: 10.10.2.0/24
Static configuration NAT of policy site1
permit L2L-VPN-POLICYNAT from the list of access ip 192.168.1.0 255.255.255.0 10.10.2.0 255.255.255.0
public static (inside, outside) 10.10.1.0 - L2L-VPN-POLICYNAT access list
Static configuration NAT of policy site2
permit L2L-VPN-POLICYNAT from the list of access ip 192.168.1.0 255.255.255.0 10.10.1.0 255.255.255.0
public static (inside, outside) 10.10.2.0 - L2L-VPN-POLICYNAT access list
PAT configuration at each end
permit L2L-VPN-POLICYPAT from the list of access ip 192.168.1.0 255.255.255.0 10.10.x.0 255.255.255.0
Global 10.10.x.1 of xxx (outside)
NAT (inside) xxx access-list L2L-VPN-POLICYPAT
If you had 2 ASAs with 8.3 or above software your static NAT configurations could be for example (same information base)
Static configuration NAT of policy site1
the object of the LAN network
subnet 192.168.1.0 255.255.255.0
network of the LAN - NAT object
10.10.1.0 subnet 255.255.255.0
network of the REMOTE object
255.255.255.0 subnet 10.10.2.0
static (inside, outside) 1 static source LAN LAN - NAT static destination REMOTE
Static configuration NAT of policy site2
the object of the LAN network
subnet 192.168.1.0 255.255.255.0
network of the LAN - NAT object
255.255.255.0 subnet 10.10.2.0
network of the REMOTE object
10.10.1.0 subnet 255.255.255.0
static (inside, outside) 1 static source LAN LAN - NAT static destination REMOTE
PAT configuration at each end
the object of the LAN network
subnet 192.168.1.0 255.255.255.0
network of the LAN-PAT object
Home 10.10.x.1
network of the REMOTE object
10.10.x.0 subnet 255.255.255.0
static (inside, outside) 1 dynamic source LAN LAN-PAT destination static REMOTE
-Jouni
-
Hi again.
When I close my phone and tablet version on my site, I intend to have two large buttons at the top of the Web site that say "CLICK HERE for VERSION PHONE" AND "PRESS HERE for TABLET VERSION.
How you launch the phone and tablet with making it duplicate content?
... Make articles to submit my site with 3 different versions?
For example,.
(1) see HumboldtPitBulls.Com for some of the best traditional dogs (goes to 'normal PC version' of the website)
(2) If you are interested in seeing see some beautiful APBTs website (goes to 'version of phone' web site)
(3) If you want to learn more about the history of the old Rednose Pitbull family discover our items (goes to version 'Tablet' on the website)
Please tell me I didn't need on the 'market' all 3 versions separate. Looks like more work that simply "come see HumboldtPitBulls.Com".
Thanks again!
Hello
You can create all three layouts of your site in a single file of Muse and publish/export/upload as required. Muse generates the code to detect the device used by the user and automatically redirects to relevant content... You only need to promote the "yourbusinessname.com" and Muse handles redirection to "yourbusinessname.com/phone/" or "yourbusinessname.com/tablet/" depending on what device you use to access the site.
Please see a few resources around Muse: Designing for Devices.
http://TV.Adobe.com/watch/Muse-feature-tour/Adobe-Muse-designing-for-mobile-devices/
http://www.adobepress.com/articles/article.asp?p=2219864
http://helpx.Adobe.com/Muse/using/creating-website-mobile-devices.html
See you soon,.
Vikas
-
I always use (and will not update) Windows XP. The details of an update of Firefox indicate that the new version (that I don't need) can interfere with XP. I want to have Firefox stop invites me for an update. How can I do this? I just continue to select "Ask Me later". Is there a more permanent solution?
Firefox 32.0.3 works great on Windows XP and contains many important security patches - actually, 'night' of pre-release Tester 35 Firefox version works fine, too.
-
Impossible to search once the site with firefox
I find a site with Firefox, once I'm there, I get those pop ups, even though I have a pop-up blocker on, and I can not search the site. For example, Harbor Freight tools. I get on the site and then impossible to search the site. It might be their site that's the problem, but I'm not sure. Moreover, how is it that when I download a new version of your software, all that junk happens, as the optimizer Pro, or some other stuff, I have no need. I go back and take most of it, because it of annoying and slows things down. Thank you.
Hello, just download firefox from the official site at mozilla.org - more updates are handled automatically by firefox if you don't have to download anything (you can run a check of updates of firefox > help > about firefox).
You can also run a full scan of your system with software security already in place and the various tools like the free version of malwarebytes, adwcleaner & kaspersky security scan to make sure there isn't already a kind of active malware on your system that triggers these false alerts.
-
Hello!
The new version of Firefox, I have a problem with the opening of the site VKontakte. The browser displays the following error message: "Firefox has determined that the server redirects the request for this address in a way that it will never end." How to solve this problem? Please excuse me for my English.
Sincerely, Vsevolod.This can be caused by corrupted cookies or cookies that are not sent or otherwise blocked.
Clear the cache and cookies from sites that cause problems.
"Clear the Cache":
- Tools > Options > advanced > network > content caching Web: 'clear now '.
'Delete Cookies' sites causing problems:
- Tools > Options > privacy > Cookies: "show the Cookies".
See also:
Maybe you are looking for
-
Received my KIt FS7K Thursday here in the United Kingdom. First of all, let me give you a profile of use of the previous video Sony: Currently I still own both the Sony HVR - Z5 (using Atomos) and Sony HXR - NX5 - my market spent was of videos on the
-
The latest Firmware for EasyUpdate V 1.9.9047 is corrupted on the server
The last
-
BRAVIA KDL-32XBR4 of lines on the screen color
After owning my Sony Bravia KDL-32XBR4 for four years, the screen has become a complete set of rainbow of colored lines, which makes it non-visible.I bought several Sony products, including TVs, in the past, according to their quality and maintenance
-
Include the results in "Batch report" instead of "report USE".
Hi all I modified the ProcessSetup TS 4.0 reminder to perform a test of the preliminary material before testing 8 DUT using batch processing model. Since this is a reminder, the results are not registered by default, so I store it in a global table o
-
Watch TV on my PC with Windows 10
My PC has a TV card and I watch TV using Windows Media. I can watch TV on my PC with Windows 10?