The size of the Pavilion HP8565C battery on the motherboard

Similar Questions

• Pavilion HPE H9-1130: install the firewire card correctly into the slot of the motherboard correctly

  Hello, for my HP Pavilion HPE H9 1130, how to install the correct firewire in the motherboard slot card OK in OS Windows 10 x 64 / x 64 processor? And what video software system can I download to recognize my Panasonic 100a camera AX?

  Thank you. Followed your instructions. And it worked perfectly. Thank you. Even if I have Adobe Prem Pro, I downloaded MS Director and put 9 drivers after installing the PCIe card. Then it worked perfectly to capture video from a FireWire camera. Thank you once again!

• Tecra S2 - can I change the battery in the motherboard?

  I have a Tecra S2 and it seems that the motherboard battery is dead. I removed the motherboard, and it seems that the battery is soldered in. Is it possible to replace the battery or should I get a new motherboard, and if I have a used motherboard I'm likely to find that its battery is drunk as well?

  I don't want to take it to the service if it cannot be fixed because they load as bulls injured here, I'll have a service center if the battery can be changed

  Hello

  Are you sure that the battery is empty? Normally, you can recharge the battery if you leave the AC adapter plugged in for a long time, e. g. 24 hours. Normally at this time, the battery can be fully charged.
  Check this box!

  Normally, such a battery can be exchanged but I think an authorized service provider can give you a better answer here because it only a user to s forum.

• HP Pavilion Media Center t3630: update the motherboard BIOS P5LP - THE visa of 6 GB of RAM / 3.5 GB usable (Windows 7 64-bit)

  Hello
  
  I added 3 GB of Ram and installed Window 7 Ultimate 64 bit on HP Pavilion Media Center t3630.it, I can't use all the RAM that I added. (Visa of 6 GB / 3.5 GB usable)
  
  The HP website is only a bios updated for XP and Vista.
  
  This forum has recommended to make a partition with XP or Vista (doesn't install system) what can I do?

  The motherboard is designed to work with four modules of 1 GB. It does not anymore.

• replacing the motherboard for hp pavilion

  I have a HP Pavilion model a4316f. The system no longer recognizes any of the readers. This system

  has a motherboard Violet 6 and from what I read in the forums, this is a common problem. If I replace

  the motherboard with another motherboard of violet 6 will be provided with recovery disks the

  system still works? If not, what are my options, do not want to buy the software after buying the motherboard

  for a 4 year old computer.

  Thank you

  You must send the motherboard to HP or an authorized service center for tattooing the BIOS/CMOS with your information system, if you want to use your HP recovery disks in the future.

  Alternatively, if you can still read the product key 25 character Windows on the Microsoft COA (see example below) attached to the computer, you can install Windows 7 using this key.

  

  Please see "how to install Windows 7 without the disc" to get instructions on how to download Windows 7 SP1, create the installation media and install Windows 7 SP1 using the 25-digit key from the COA Microsoft on your computer. Understand that this method will not contain any what customizations HP or HP software value-added.

  Windows 7 SP1 can be found HERE and HERE.

  Direct link to Windows 7 USB/DVD Download tool.

  Please consult your computer HP Pavilion a4316f Desktop PC drivers page for Windows 7 drivers. If you have any questions, locate the appropriate drivers, please message the Windows Device Manager (text only) "Hardware ID" of all remaining missing or unknown devices, as shown in the example below.

  

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Pavilion dv7 - 1243cl: Questions of compensation for the motherboard component

  I have the following related material two 2 for hp experts, and both issues are with respect to the same JBK00 - 4091 P Rev 1 a motherboard, which is installed in a computer hp Pavilion dv7 - 1243 cl laptop:

  Below, I've included a picture that relates to both of my questions.

  QUESTION #1: I accidentally lost a resistance in repair motherboard of my friend. None of the experts know the ohm value of resistance R610?

  As you can probably tell from the image, below, I accidentally ripped out all the pads of twelve 12 pins on the motherboard for FFC connector JP36 (pictured below), so I have to fill each of the connections with wire 30AWG pin connector FFC (JP36). That said, I have been unable to trace the pin #10 connector FFC to any component on the motherboard, so my last question is the following:

  QUESTION #2: Regarding the twelve 12-pin FFC connector as shown in the image below (component no. PCB: JP36), which component pin #10 connects to the motherboard?

  Any help would be DEEPLY appreciated!

  

  I thought about it, so I thought I'd post the answer just in case someone else has the same problem in the future.

  R611 = 0.1 Ω

  R610 = 0.1 Ω

• Satellite L300 - battery not charging but the power is to reach to the motherboard

  Hello

  I gave up the laptop and after that not get battery. Laptop works fine with battery only. I opened the laptop to find if it is something dislodged. But everything was fine. I checked the power comes up to the motherboard. But do not charge the battery.

  For more information, I opened only Panel keyboard and down to reach the power supply cord. I can see the top section of the motherboard page where I checked that power is reached.

  Any body can help?

  Thank you.

  Abir

  > Can any body help?

  I think that the material must be scanned for potential problems.
  I can only speculate on the defective parts
  It could be the power problem or something is broken on the motherboard, but its most of the time impossible to say what's wrong here
  So get in touch with a local Toshiba authorized service guy to check this.

• Pavilion dv6-6138nr replacing the motherboard

  Hello

  Does someone knows the model of motherboard Pavilion db6-6138nr, product: A3X37UA

  the motherboard is version intel with processor i5 and Winodws 7 home.

  The God of the motherboard damaged because someone falling water on the laptop.

  Y at - he neither allows for the damaged thus processor?

  jomebeva wrote:
  

  Hello

  Does someone knows the model of motherboard Pavilion db6-6138nr, product: A3X37UA

  the motherboard is version intel with processor i5 and Winodws 7 home.

  The God of the motherboard damaged because someone falling water on the laptop.

  Y at - he neither allows for the damaged thus processor?

  Hello

  The CPU will be fine as it is on the lower side of the motherboard. There is more compatible motherboards for the laptop. I suggest to consider an upgrade because you have to disassemble everything laptop anyway. The motherboard is probably for that dual-core (i3/i5) computer laptop and some dual core i7 chips.

  Is the part number for the original motherboard: 641485-001
  It is possible to improve this laptop with an i7 processor with dedicated graphics ATI Radeon HD6770M 2 GB RAM video card. However, it requires a different heatsink. Board reference number: 650799-001 and the heatsink: 650797-001.
  Manual: http://www.hp.com/ctg/Manual/c02842252.pdf

• Where can I find of the bios chip on the motherboard of my Pavilion a6010e desktop computer and it is soldered?

  Where is the bios chip on the motherboard of my hp pavilion ab010e desktop computer and it is soldered?

  It is welded.

  

• Example: Pavilion dv7-3165dx: Pavilion dv7 3165 has a graphics card, or it is part of the motherboard?

  Pavilion dv7-3165 there a graphic/video card or it is part of the motherboard?

  Well, I downloaded and reinstalled the driver, but it does not solve my problem. Guess I have to replace the motherboard.

• Pavilion dv7-3165dx: restoration of BONE after the replacement of the motherboard

  I'll have to replace a defective motherboardin a Pavilion laptop dv7. The HARD drive seems intact and still has the restore partition. I'll still be able to re - install the operating system of the existing or should I reinstall from disc and if so still use my existing COA? Laptop is a WA794UA #ABA

  Thanks for any help I can get.

  @Donthemon,

  Welcome to the HP Forums! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  Thank you for posting. I read your post, and I understand that you want to reinstall the operating system after replacing the motherboard. I'm happy to help you in this case.

  You can restore the OS from the HARD drive.

  HP computers - performing a recovery of system HP (Windows 7)

  You can also create your own recovery disk

  HP computers - create and use a System Image to restore your computer (Windows 7)

  Don't forget to back up your files before recovery.

  Let me know if you need more assistance.

  Kind regards

• HP Pavilion Notebook 15-e020us: reactivation of Windows 8 after the replacement of the motherboard

  I have a client with a HP Pavilion Notebook 15-e020us. The motherboard is dead and must be replaced. It is, of course, out of warranty. I can find used/given to nine mothers online, but worry about the reactivation of Windows 8.1 once the replacement card is installed.  Can someone enlighten me on how to go about this without having to pay for a new license key?  I met the same problem with a Dell laptop and have ended up changing the license to it, making the project too costly.

  Hello

  > so sorry for what we cannot provide or be able to get this product key

  > because Hp does not provide the activation key that will be tattooed on the motherboard

  > and if you need to activate you will need to purchase a commercial version

  > and not sure of the DELL printer

  Please click on "Accept as Solution" If you feel my post solved your problem, it will help others find the solution.

  Click on the 'Congratulations, Thumbs Up' at the bottom right to say 'Thank you' for helping to!

• How to replace the motherboard on the Pavilion p6550z

  How to replace the motherboard on the Pavilion p6550z

  Depending on where you have acquired your replacement Board Aloe, it may be 'tattooed' with the name of the model, product number and the serial number of your computer.

  Use these HP guides as needed.

  (1) unplug the computer and hold power in 5 to 10 seconds.

  (2) on the side of the cover (see guides above)

  (3) place the case on the closed side with the open side facing upwards

  (4) take a photograph detailed inside your computer... take more if necessary

  (5) unscrew the restraint of external expansion card (see guides above)

  (6) disconnect the power supply connections to the motherboard and all devices... tag and/or take more pictures

  (7) remove the... rock expansion cards cards gently just pulling up

  (8) unplug data cables from the motherboard and readers... tag and/or take more pictures

  (9) disconnect remaining USB switch, connections etc... once again, the label or take more pictures

  (10) remove all motherboard screws on the case and remove the motherboard

  (11) reverse the steps, starting with #10 and working #1

  Good luck

• is the GPU of NVIDIA chip on the motherboard for HP Pavilion dv9420us

  My HP Pavilion DV9420us just went 'all white' and now won't show anything.  It also keeps cycling on and outside.

  I just read that a class action has been filed last year (2010) against NVIDIA on GPU chipset.  It's time to add my complaint to the trial.

  So, as my laptop is 'dead' anyway, I want to replace the GPU NVIDA myself.  I know that it is on a 'table', so I have to replace the Board on what it is.

  My questions are: is this on the motherboard? or on a separate Panel? When I opened the laptop, the chip is identified as "NVIDIA" blah, blah, blah?

  I have built office machines and have replaced a video screen on another laptop, so I am familiar with the "inner".

  Just like get some info before I try this.

  I have a device to get "dead" files on HARD drive, but when I looked at the pins of the connector on the HARD drive (2), they are 90 ° to the HD and separated, very different from a 'normal' laptop HD where the stems come out all right.

  I found a place on the WEB that has a motherboard for my laptop, about $165.

  Any info will be appreciated.

  Thank you for your time.

  jmzamo

  Hello:

  Here is the link to the service manual for your laptop.  You will need to replace the mother board to replace the video card. See Chapter 5 for removal and replacement procedures.

  http://h10032.www1.HP.com/CTG/manual/c01311536.PDF

  I'm sure it's a standard SATA HDD and you just have to remove the adapter in.

  In any case, Chapter 5 provides procedures for withdrawal and replacement for that too.

  Paul

• Update m9376.fr Pavilion vista 64 for Win7 64 - driver of the motherboard required

  Hi all

  Since a few days, I have several errors in cluster on two hard disks for my HP Pavilion

  I fear that it also affected the recovery partition.

  Therefore, I have 2 new hard drives and a Win7 64 bit ready to install.

  But before that, I need to know how to get the drivers from the motherboard (Intel G33 chipset, sound and network, realtek... etc.).

  I think I've found a few of them:

  Chipset: OK

  Videocard: OK

  Realtek: probably managed by Win7

  but I feel uncomfortable on others:

  Gemtek WUBR177G

  Intel Corporation 82801 SATA RAID

  HL-DT-ST DVD-RAM GH10L

  Transceiver Northstar Systems eHome infrared, Inc.

  ...

  Someone already try and meet all required drivers?

  Thanks in advance for your support

  sound system

  Hello

  If your system still start then run this utility from Microsoft.    Microsoft Windows 7 Upgrade Advisor

  Windows 7 64-bit should have all the drivers you need for the motherboard.  You must also install Windows 7 service pack 1.

  I have the same motherboard in my PC and it is not a problem with Windows 7 64 bit.

  Other devices that you mentioned will require that you go to the web site of the manufacturer and look for the drivers and support Windows 7 64.

  Check your CD/DVD drive for a firmware update before you convert them to WIndows 7.

  Check your PC for a bios update before you convert them to Windows 7.